include/configs/IVML24.h

   1 /*
   2  * (C) Copyright 2001
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35
  36 #define CONFIG_MPC860           1       /* This is a MPC860 CPU         */
  37 #define CONFIG_IVML24           1       /* ...on a IVML24 board         */
  38
  39 #if defined (CONFIG_IVML24_16M)
  40 # define CONFIG_IDENT_STRING     " IVML24"
  41 #elif defined (CONFIG_IVML24_32M)
  42 # define CONFIG_IDENT_STRING     " IVML24_128"
  43 #elif defined (CONFIG_IVML24_64M)
  44 # define CONFIG_IDENT_STRING     " IVML24_256"
  45 #endif
  46
  47 #define CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
  48 #undef  CONFIG_8xx_CONS_SMC2
  49 #undef  CONFIG_8xx_CONS_NONE
  50 #define CONFIG_BAUDRATE         115200
  51
  52 #define CONFIG_CLOCKS_IN_MHZ    1       /* clocks passsed to Linux in MHz */
  53 #define CONFIG_8xx_GCLK_FREQ    50331648
  54
  55 #define CONFIG_RESET_PHY_R      1       /* Call reset_phy()             */
  56
  57 #define CONFIG_SHOW_BOOT_PROGRESS 1     /* Show boot progress on LEDs   */
  58
  59 #if 0
  60 #define CONFIG_BOOTDELAY        -1      /* autoboot disabled            */
  61 #else
  62 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  63 #endif
  64 #define CONFIG_BOOTCOMMAND      "bootp" /* autoboot command             */
  65
  66 #define CONFIG_BOOTARGS         "root=/dev/nfs rw "                     \
  67                                 "nfsroot=10.0.0.2:/opt/eldk/ppc_8xx "   \
  68                                 "nfsaddrs=10.0.0.99:10.0.0.2"
  69
  70 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  71 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE            /* don't allow baudrate change  */
  72
  73 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  74
  75 #define CONFIG_STATUS_LED       1       /* Status LED enabled           */
  76
  77
  78 /*
  79  * Command line configuration.
  80  */
  81 #include <config_cmd_default.h>
  82
  83 #define CONFIG_CMD_IDE
  84
  85
  86 #define CONFIG_MAC_PARTITION
  87 #define CONFIG_DOS_PARTITION
  88
  89 /*
  90  * BOOTP options
  91  */
  92 #define CONFIG_BOOTP_SUBNETMASK
  93 #define CONFIG_BOOTP_HOSTNAME
  94 #define CONFIG_BOOTP_BOOTPATH
  95 #define CONFIG_BOOTP_BOOTFILESIZE
  96
  97
  98 /*
  99  * Miscellaneous configurable options
 100  */
 101 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 102 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt       */
 103 #if defined(CONFIG_CMD_KGDB)
 104 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
 105 #else
 106 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size      */
 107 #endif
 108 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 109 #define CONFIG_SYS_MAXARGS      16              /* max number of command args   */
 110 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 111
 112 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on     */
 113 #define CONFIG_SYS_MEMTEST_END          0x00F00000      /* 1 ... 15MB in DRAM   */
 114
 115 #define CONFIG_SYS_LOAD_ADDR            0x00100000      /* default load address */
 116
 117 #define CONFIG_SYS_PIO_MODE             0       /* IDE interface in PIO Mode 0  */
 118
 119 #define CONFIG_SYS_PB_12V_ENABLE        0x00002000              /* PB 18        */
 120 #define CONFIG_SYS_PB_ILOCK_SWITCH      0x00004000              /* PB 17        */
 121 #define CONFIG_SYS_PB_SDRAM_CLKE        0x00008000              /* PB 16        */
 122 #define CONFIG_SYS_PB_ETH_POWERDOWN     0x00010000              /* PB 15        */
 123 #define CONFIG_SYS_PB_IDE_MOTOR 0x00020000              /* PB 14        */
 124
 125 #define CONFIG_SYS_PC_ETH_RESET ((ushort)0x0010)        /* PC 11        */
 126 #define CONFIG_SYS_PC_IDE_RESET ((ushort)0x0020)        /* PC 10        */
 127
 128 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1 ms ticks */
 129
 130 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 131
 132 /*
 133  * Low Level Configuration Settings
 134  * (address mappings, register initial values, etc.)
 135  * You should know what you are doing if you make changes here.
 136  */
 137 /*-----------------------------------------------------------------------
 138  * Internal Memory Mapped Register
 139  */
 140 #define CONFIG_SYS_IMMR         0xFFF00000 /* was: 0xFF000000 */
 141
 142 /*-----------------------------------------------------------------------
 143  * Definitions for initial stack pointer and data area (in DPRAM)
 144  */
 145 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 146
 147 #if defined (CONFIG_IVML24_16M)
 148 # define        CONFIG_SYS_INIT_RAM_END 0x2F00  /* End of used area in DPRAM    */
 149 #elif defined (CONFIG_IVML24_32M)
 150 # define        CONFIG_SYS_INIT_RAM_END 0x3000  /* End of used area in DPRAM    */
 151 #elif defined (CONFIG_IVML24_64M)
 152 # define        CONFIG_SYS_INIT_RAM_END 0x3000  /* End of used area in DPRAM    */
 153 #endif
 154
 155 #define CONFIG_SYS_GBL_DATA_SIZE        64  /* size in bytes reserved for initial data */
 156 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 157 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 158
 159 /*-----------------------------------------------------------------------
 160  * Start addresses for the final memory configuration
 161  * (Set up by the startup code)
 162  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 163  */
 164 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 165 #define CONFIG_SYS_FLASH_BASE           0xFF000000
 166 #ifdef  DEBUG
 167 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor   */
 168 #else
 169 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)     /* Reserve 192 kB for Monitor   */
 170 #endif
 171 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 172 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
 173
 174 /*
 175  * For booting Linux, the board info and command line data
 176  * have to be in the first 8 MB of memory, since this is
 177  * the maximum mapped by the Linux kernel during initialization.
 178  */
 179 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 180 /*-----------------------------------------------------------------------
 181  * FLASH organization
 182  */
 183 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
 184 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max number of sectors on one chip    */
 185
 186 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 187 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
 188
 189 #define CONFIG_ENV_IS_IN_FLASH  1
 190 #define CONFIG_ENV_OFFSET               0x7A000 /*   Offset   of Environment Sector     */
 191 #define CONFIG_ENV_SIZE         0x2000  /* Total Size of Environment Sector     */
 192 /*-----------------------------------------------------------------------
 193  * Cache Configuration
 194  */
 195 #define CONFIG_SYS_CACHELINE_SIZE       16      /* For all MPC8xx CPUs                  */
 196 #if defined(CONFIG_CMD_KGDB)
 197 #define CONFIG_SYS_CACHELINE_SHIFT      4       /* log base 2 of the above value        */
 198 #endif
 199
 200 /*-----------------------------------------------------------------------
 201  * SYPCR - System Protection Control                            11-9
 202  * SYPCR can only be written once after reset!
 203  *-----------------------------------------------------------------------
 204  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 205  */
 206 #if defined(CONFIG_WATCHDOG)
 207
 208 # if defined (CONFIG_IVML24_16M)
 209 #  define CONFIG_SYS_SYPCR      (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 210                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 211 # elif defined (CONFIG_IVML24_32M)
 212 #  define CONFIG_SYS_SYPCR      (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 213                          SYPCR_SWE  | SYPCR_SWP)
 214 # elif defined (CONFIG_IVML24_64M)
 215 #  define CONFIG_SYS_SYPCR      (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 216                          SYPCR_SWE  | SYPCR_SWP)
 217 # endif
 218
 219 #else
 220 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 221 #endif
 222
 223 /*-----------------------------------------------------------------------
 224  * SIUMCR - SIU Module Configuration                            11-6
 225  *-----------------------------------------------------------------------
 226  * PCMCIA config., multi-function pin tri-state
 227  */
 228 /* EARB, DBGC and DBPC are initialised by the HCW */
 229 /* => 0x000000C0 */
 230 #define CONFIG_SYS_SIUMCR       (SIUMCR_BSC | SIUMCR_GB5E)
 231
 232 /*-----------------------------------------------------------------------
 233  * TBSCR - Time Base Status and Control                         11-26
 234  *-----------------------------------------------------------------------
 235  * Clear Reference Interrupt Status, Timebase freezing enabled
 236  */
 237 #define CONFIG_SYS_TBSCR        (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 238
 239 /*-----------------------------------------------------------------------
 240  * PISCR - Periodic Interrupt Status and Control                11-31
 241  *-----------------------------------------------------------------------
 242  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 243  */
 244 #define CONFIG_SYS_PISCR        (PISCR_PS | PISCR_PITF)
 245
 246 /*-----------------------------------------------------------------------
 247  * PLPRCR - PLL, Low-Power, and Reset Control Register          15-30
 248  *-----------------------------------------------------------------------
 249  * Reset PLL lock status sticky bit, timer expired status bit and timer
 250  * interrupt status bit, set PLL multiplication factor !
 251  */
 252 /* 0x00B0C0C0 */
 253 #define CONFIG_SYS_PLPRCR                                                       \
 254                 (       (11 << PLPRCR_MF_SHIFT) |                       \
 255                         PLPRCR_SPLSS | PLPRCR_TEXPS | /*PLPRCR_TMIST|*/ \
 256                         /*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL |            \
 257                         PLPRCR_CSR   | PLPRCR_LOLRE /*|PLPRCR_FIOPD*/   \
 258                 )
 259
 260 /*-----------------------------------------------------------------------
 261  * SCCR - System Clock and reset Control Register               15-27
 262  *-----------------------------------------------------------------------
 263  * Set clock output, timebase and RTC source and divider,
 264  * power management and some other internal clocks
 265  */
 266 #define SCCR_MASK       SCCR_EBDF11
 267 /* 0x01800014 */
 268 #define CONFIG_SYS_SCCR (SCCR_COM01     | /*SCCR_TBS|*/         \
 269                          SCCR_RTDIV     |   SCCR_RTSEL    |     \
 270                          /*SCCR_CRQEN|*/  /*SCCR_PRQEN|*/       \
 271                          SCCR_EBDF00    |   SCCR_DFSYNC00 |     \
 272                          SCCR_DFBRG00   |   SCCR_DFNL000  |     \
 273                          SCCR_DFNH000   |   SCCR_DFLCD101 |     \
 274                          SCCR_DFALCD00)
 275
 276 /*-----------------------------------------------------------------------
 277  * RTCSC - Real-Time Clock Status and Control Register          11-27
 278  *-----------------------------------------------------------------------
 279  */
 280 /* 0x00C3 */
 281 #define CONFIG_SYS_RTCSC        (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 282
 283
 284 /*-----------------------------------------------------------------------
 285  * RCCR - RISC Controller Configuration Register                19-4
 286  *-----------------------------------------------------------------------
 287  */
 288 /* TIMEP=2 */
 289 #define CONFIG_SYS_RCCR 0x0200
 290
 291 /*-----------------------------------------------------------------------
 292  * RMDS - RISC Microcode Development Support Control Register
 293  *-----------------------------------------------------------------------
 294  */
 295 #define CONFIG_SYS_RMDS 0
 296
 297 /*-----------------------------------------------------------------------
 298  *
 299  * Interrupt Levels
 300  *-----------------------------------------------------------------------
 301  */
 302 #define CONFIG_SYS_CPM_INTERRUPT        13      /* SIU_LEVEL6   */
 303
 304 /*-----------------------------------------------------------------------
 305  * PCMCIA stuff
 306  *-----------------------------------------------------------------------
 307  *
 308  */
 309 #define CONFIG_SYS_PCMCIA_MEM_ADDR      (0xE0000000)
 310 #define CONFIG_SYS_PCMCIA_MEM_SIZE      ( 64 << 20 )
 311 #define CONFIG_SYS_PCMCIA_DMA_ADDR      (0xE4000000)
 312 #define CONFIG_SYS_PCMCIA_DMA_SIZE      ( 64 << 20 )
 313 #define CONFIG_SYS_PCMCIA_ATTRB_ADDR    (0xE8000000)
 314 #define CONFIG_SYS_PCMCIA_ATTRB_SIZE    ( 64 << 20 )
 315 #define CONFIG_SYS_PCMCIA_IO_ADDR       (0xEC000000)
 316 #define CONFIG_SYS_PCMCIA_IO_SIZE       ( 64 << 20 )
 317
 318 /*-----------------------------------------------------------------------
 319  * IDE/ATA stuff
 320  *-----------------------------------------------------------------------
 321  */
 322 #define CONFIG_IDE_8xx_DIRECT   1       /* PCMCIA interface required    */
 323 #define CONFIG_IDE_RESET        1       /* reset for ide supported      */
 324
 325 #define CONFIG_SYS_IDE_MAXBUS           1       /* The IVML24 has only 1 IDE bus*/
 326 #define CONFIG_SYS_IDE_MAXDEVICE        1       /*    ... and only 1 IDE device */
 327
 328 #define CONFIG_SYS_ATA_BASE_ADDR        0xFE100000
 329 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 330 #undef  CONFIG_SYS_ATA_IDE1_OFFSET              /* only one IDE bus available   */
 331
 332 #define CONFIG_SYS_ATA_DATA_OFFSET      0x0000  /* Offset for data I/O                  */
 333 #define CONFIG_SYS_ATA_REG_OFFSET       0x0080  /* Offset for normal register accesses  */
 334 #define CONFIG_SYS_ATA_ALT_OFFSET       0x0100  /* Offset for alternate registers       */
 335
 336 /*-----------------------------------------------------------------------
 337  *
 338  *-----------------------------------------------------------------------
 339  *
 340  */
 341 #define CONFIG_SYS_DER  0
 342
 343 /*
 344  * Init Memory Controller:
 345  *
 346  * BR0 and OR0 (FLASH)
 347  */
 348
 349 #define FLASH_BASE0_PRELIM      0xFF000000      /* FLASH bank #0        */
 350
 351 /* used to re-map FLASH both when starting from SRAM or FLASH:
 352  * restrict access enough to keep SRAM working (if any)
 353  * but not too much to meddle with FLASH accesses
 354  */
 355 /* EPROMs are 512kb */
 356 #define CONFIG_SYS_REMAP_OR_AM          0xFFF80000      /* OR addr mask */
 357 #define CONFIG_SYS_PRELIM_OR_AM 0xFFF80000      /* OR addr mask */
 358
 359 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1        */
 360 #define CONFIG_SYS_OR_TIMING_FLASH      (OR_SCY_5_CLK | OR_EHTR)
 361
 362 #define CONFIG_SYS_OR0_REMAP    ( CONFIG_SYS_REMAP_OR_AM | OR_ACS_DIV4 | OR_BI | \
 363                                 CONFIG_SYS_OR_TIMING_FLASH)
 364 #define CONFIG_SYS_OR0_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | OR_ACS_DIV4 | OR_BI | \
 365                                 CONFIG_SYS_OR_TIMING_FLASH)
 366 /* 16 bit, bank valid */
 367 #define CONFIG_SYS_BR0_PRELIM   ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 368
 369 /*
 370  * BR1/OR1 - ELIC SACCO bank  @ 0xFE000000
 371  *
 372  * AM=0xFFFF8 ATM=0 CSNT/SAM=1 ACS/G5LA/G5LS=3 BIH=1 SCY=2 SETA=0 TRLX=1 EHTR=1
 373  */
 374 #define ELIC_SACCO_BASE         0xFE000000
 375 #define ELIC_SACCO_OR_AM        0xFFFF8000
 376 #define ELIC_SACCO_TIMING       (OR_SCY_2_CLK | OR_TRLX | OR_EHTR)
 377
 378 #define CONFIG_SYS_OR1  (ELIC_SACCO_OR_AM | OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
 379                         ELIC_SACCO_TIMING)
 380 #define CONFIG_SYS_BR1  ((ELIC_SACCO_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
 381
 382 /*
 383  * BR2/OR2 - ELIC EPIC bank   @ 0xFE008000
 384  *
 385  * AM=0xFFFF8 ATM=0 CSNT/SAM=1 ACS/G5LA/G5LS=3 BIH=1 SCY=2 SETA=0 TRLX=1 EHTR=1
 386  */
 387 #define ELIC_EPIC_BASE          0xFE008000
 388 #define ELIC_EPIC_OR_AM         0xFFFF8000
 389 #define ELIC_EPIC_TIMING        (OR_SCY_2_CLK | OR_TRLX | OR_EHTR)
 390
 391 #define CONFIG_SYS_OR2 (ELIC_EPIC_OR_AM | OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
 392                         ELIC_EPIC_TIMING)
 393 #define CONFIG_SYS_BR2  ((ELIC_EPIC_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
 394
 395 /*
 396  * BR3/OR3: SDRAM
 397  *
 398  * Multiplexed addresses, GPL5 output to GPL5_A (don't care)
 399  */
 400 #define SDRAM_BASE3_PRELIM      0x00000000      /* SDRAM bank */
 401 #define SDRAM_PRELIM_OR_AM      0xF8000000      /* map max. 128 MB */
 402 #define SDRAM_TIMING            OR_SCY_0_CLK    /* SDRAM-Timing */
 403
 404 #define SDRAM_MAX_SIZE          0x04000000      /* max 64 MB SDRAM */
 405
 406 #define CONFIG_SYS_OR3_PRELIM   (SDRAM_PRELIM_OR_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING )
 407 #define CONFIG_SYS_BR3_PRELIM   ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V )
 408
 409 /*
 410  * BR4/OR4 - HDLC Address
 411  *
 412  *  AM=0xFFFF8 ATM=0 CSNT/SAM=0 ACS/G5LA/G5LS=0 BIH=1 SCY=1 SETA=0 TRLX=0 EHTR=0
 413  */
 414 #define HDLC_ADDR_BASE          0xFE108000      /* HDLC Address area */
 415 #define HDLC_ADDR_OR_AM         0xFFFF8000
 416 #define HDLC_ADDR_TIMING        OR_SCY_1_CLK
 417
 418 #define CONFIG_SYS_OR4  (HDLC_ADDR_OR_AM | OR_BI | HDLC_ADDR_TIMING)
 419 #define CONFIG_SYS_BR4  ((HDLC_ADDR_BASE & BR_BA_MSK) | BR_PS_8 | BR_WP | BR_V )
 420
 421 /*
 422  * BR5/OR5: SHARC ADSP-2165L
 423  *
 424  * AM=0xFFC00 ATM=0 CSNT/SAM=0 ACS/G5LA/G5LS=3 BIH=1 SCY=0 SETA=0 TRLX=0 EHTR=0
 425  */
 426 #define SHARC_BASE              0xFE400000
 427 #define SHARC_OR_AM             0xFFC00000
 428 #define SHARC_TIMING            OR_SCY_0_CLK
 429
 430 #define CONFIG_SYS_OR5  (SHARC_OR_AM | OR_ACS_DIV2 | OR_BI | SHARC_TIMING )
 431 #define CONFIG_SYS_BR5  ((SHARC_BASE & BR_BA_MSK) | BR_PS_32 | BR_MS_UPMA | BR_V )
 432
 433 /*
 434  * Memory Periodic Timer Prescaler
 435  */
 436
 437 /* periodic timer for refresh */
 438 #define CONFIG_SYS_MBMR_PTB     204
 439
 440 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit     */
 441 #define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16         /* setting for 2 banks  */
 442 #define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32         /* setting for 1 bank   */
 443
 444 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit         */
 445 #define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8          /* setting for 2 banks  */
 446
 447 #if defined (CONFIG_IVML24_16M)
 448 # define CONFIG_SYS_MPTPR_1BK_8K        MPTPR_PTP_DIV16         /* setting for 1 bank   */
 449 #elif defined (CONFIG_IVML24_32M)
 450 # define CONFIG_SYS_MPTPR_1BK_8K        MPTPR_PTP_DIV16         /* setting for 1 bank   */
 451 #elif defined (CONFIG_IVML24_64M)
 452 # define CONFIG_SYS_MPTPR_1BK_8K        MPTPR_PTP_DIV8          /* setting for 1 bank   */
 453 #endif
 454
 455
 456 /*
 457  * MBMR settings for SDRAM
 458  */
 459
 460 #if defined (CONFIG_IVML24_16M)
 461  /* 8 column SDRAM */
 462 # define CONFIG_SYS_MBMR_8COL   ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT)  | \
 463                          MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 |   \
 464                          MBMR_RLFB_1X    | MBMR_WLFB_1X    | MBMR_TLFB_4X)
 465 #elif defined (CONFIG_IVML24_32M)
 466 /* 128 MBit SDRAM */
 467 # define CONFIG_SYS_MBMR_8COL   ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT)  | \
 468                          MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |   \
 469                          MBMR_RLFB_1X    | MBMR_WLFB_1X    | MBMR_TLFB_4X)
 470 #elif defined (CONFIG_IVML24_64M)
 471 /* 128 MBit SDRAM */
 472 # define CONFIG_SYS_MBMR_8COL   ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT)  | \
 473                          MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |   \
 474                          MBMR_RLFB_1X    | MBMR_WLFB_1X    | MBMR_TLFB_4X)
 475 #endif
 476
 477 /*
 478  * Internal Definitions
 479  *
 480  * Boot Flags
 481  */
 482 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 483 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 484
 485 #endif  /* __CONFIG_H */