include/configs/M5208EVBE.h

   1 /*
   2  * Configuation settings for the Freescale MCF5208EVBe.
   3  *
   4  * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef _M5208EVBE_H
  11 #define _M5208EVBE_H
  12
  13 /*
  14  * High Level Configuration Options
  15  * (easy to change)
  16  */
  17 #define CONFIG_MCFUART
  18 #define CONFIG_SYS_UART_PORT            (0)
  19 #define CONFIG_BAUDRATE                 115200
  20
  21 #undef CONFIG_WATCHDOG
  22 #define CONFIG_WATCHDOG_TIMEOUT         5000
  23
  24 /* Command line configuration */
  25 #define CONFIG_CMD_CACHE
  26 #define CONFIG_CMD_ELF
  27 #undef CONFIG_CMD_I2C
  28 #define CONFIG_CMD_MII
  29 #define CONFIG_CMD_PING
  30 #define CONFIG_CMD_REGINFO
  31
  32 #define CONFIG_MCFFEC
  33 #ifdef CONFIG_MCFFEC
  34 #       define CONFIG_MII               1
  35 #       define CONFIG_MII_INIT          1
  36 #       define CONFIG_SYS_DISCOVER_PHY
  37 #       define CONFIG_SYS_RX_ETH_BUFFER 8
  38 #       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  39 #       define CONFIG_HAS_ETH1
  40
  41 #       define CONFIG_SYS_FEC0_PINMUX   0
  42 #       define CONFIG_SYS_FEC0_MIIBASE  CONFIG_SYS_FEC0_IOBASE
  43 #       define MCFFEC_TOUT_LOOP         50000
  44 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  45 #       ifndef CONFIG_SYS_DISCOVER_PHY
  46 #               define FECDUPLEX        FULL
  47 #               define FECSPEED         _100BASET
  48 #       else
  49 #               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  50 #                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  51 #               endif
  52 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
  53 #endif
  54
  55 /* Timer */
  56 #define CONFIG_MCFTMR
  57 #undef CONFIG_MCFPIT
  58
  59 /* I2C */
  60 #define CONFIG_SYS_I2C
  61 #define CONFIG_SYS_I2C_FSL
  62 #define CONFIG_SYS_FSL_I2C_SPEED        80000
  63 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
  64 #define CONFIG_SYS_FSL_I2C_OFFSET       0x58000
  65 #define CONFIG_SYS_IMMR                 CONFIG_SYS_MBAR
  66
  67 #define CONFIG_BOOTDELAY                1       /* autoboot after 5 seconds */
  68 #define CONFIG_UDP_CHECKSUM
  69
  70 #ifdef CONFIG_MCFFEC
  71 #       define CONFIG_IPADDR    192.162.1.2
  72 #       define CONFIG_NETMASK   255.255.255.0
  73 #       define CONFIG_SERVERIP  192.162.1.1
  74 #       define CONFIG_GATEWAYIP 192.162.1.1
  75 #endif                          /* CONFIG_MCFFEC */
  76
  77 #define CONFIG_HOSTNAME         M5208EVBe
  78 #define CONFIG_EXTRA_ENV_SETTINGS               \
  79         "netdev=eth0\0"                         \
  80         "loadaddr=40010000\0"                   \
  81         "u-boot=u-boot.bin\0"                   \
  82         "load=tftp ${loadaddr) ${u-boot}\0"     \
  83         "upd=run load; run prog\0"              \
  84         "prog=prot off 0 3ffff;"                \
  85         "era 0 3ffff;"                          \
  86         "cp.b ${loadaddr} 0 ${filesize};"       \
  87         "save\0"                                \
  88         ""
  89
  90 #define CONFIG_PRAM             512     /* 512 KB */
  91 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
  92
  93 #ifdef CONFIG_CMD_KGDB
  94 #       define CONFIG_SYS_CBSIZE        1024    /* Console I/O Buffer Size */
  95 #else
  96 #       define CONFIG_SYS_CBSIZE        256     /* Console I/O Buffer Size */
  97 #endif
  98
  99 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
 100 #define CONFIG_SYS_MAXARGS      16              /* max number of cmd args */
 101 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Arg Buf Sz */
 102 #define CONFIG_SYS_LOAD_ADDR    0x40010000
 103
 104 #define CONFIG_SYS_CLK          166666666       /* CPU Core Clock */
 105 #define CONFIG_SYS_PLL_ODR      0x36
 106 #define CONFIG_SYS_PLL_FDR      0x7D
 107
 108 #define CONFIG_SYS_MBAR         0xFC000000
 109
 110 /*
 111  * Low Level Configuration Settings
 112  * (address mappings, register initial values, etc.)
 113  * You should know what you are doing if you make changes here.
 114  */
 115 /* Definitions for initial stack pointer and data area (in DPRAM) */
 116 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 117 #define CONFIG_SYS_INIT_RAM_SIZE                0x4000  /* Size of used area in internal SRAM */
 118 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 119 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
 120 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 121
 122 /*
 123  * Start addresses for the final memory configuration
 124  * (Set up by the startup code)
 125  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 126  */
 127 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 128 #define CONFIG_SYS_SDRAM_SIZE           32      /* SDRAM size in MB */
 129 #define CONFIG_SYS_SDRAM_CFG1           0x43711630
 130 #define CONFIG_SYS_SDRAM_CFG2           0x56670000
 131 #define CONFIG_SYS_SDRAM_CTRL           0xE1002000
 132 #define CONFIG_SYS_SDRAM_EMOD           0x80010000
 133 #define CONFIG_SYS_SDRAM_MODE           0x00CD0000
 134
 135 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE + 0x400
 136 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 137
 138 #define CONFIG_SYS_MONITOR_BASE         (CONFIG_SYS_FLASH_BASE + 0x400)
 139 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 140
 141 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 142 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc() */
 143
 144 /*
 145  * For booting Linux, the board info and command line data
 146  * have to be in the first 8 MB of memory, since this is
 147  * the maximum mapped by the Linux kernel during initialization ??
 148  */
 149 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 150 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 151
 152 /* FLASH organization */
 153 #define CONFIG_SYS_FLASH_CFI
 154 #ifdef CONFIG_SYS_FLASH_CFI
 155 #       define CONFIG_FLASH_CFI_DRIVER          1
 156 #       define CONFIG_SYS_FLASH_SIZE            0x800000        /* Max size that the board might have */
 157 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 158 #       define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 159 #       define CONFIG_SYS_MAX_FLASH_SECT        254     /* max number of sectors on one chip */
 160 #       define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 161 #endif
 162
 163 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 164
 165 /*
 166  * Configuration for environment
 167  * Environment is embedded in u-boot in the second sector of the flash
 168  */
 169 #define CONFIG_ENV_OFFSET               0x2000
 170 #define CONFIG_ENV_SIZE                 0x1000
 171 #define CONFIG_ENV_SECT_SIZE            0x2000
 172 #define CONFIG_ENV_IS_IN_FLASH          1
 173
 174 #define LDS_BOARD_TEXT \
 175         . = DEFINED(env_offset) ? env_offset : .; \
 176         common/env_embedded.o (.text*);
 177
 178 /* Cache Configuration */
 179 #define CONFIG_SYS_CACHELINE_SIZE       16
 180
 181 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 182                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 183 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 184                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 185 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV | CF_CACR_INVI)
 186 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 187                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 188                                          CF_ACR_EN | CF_ACR_SM_ALL)
 189 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_CINV | \
 190                                          CF_CACR_DISD | CF_CACR_INVI | \
 191                                          CF_CACR_CEIB | CF_CACR_DCM | \
 192                                          CF_CACR_EUSP)
 193
 194 /* Chipselect bank definitions */
 195 /*
 196  * CS0 - NOR Flash
 197  * CS1 - Available
 198  * CS2 - Available
 199  * CS3 - Available
 200  * CS4 - Available
 201  * CS5 - Available
 202  */
 203 #define CONFIG_SYS_CS0_BASE             0
 204 #define CONFIG_SYS_CS0_MASK             0x007F0001
 205 #define CONFIG_SYS_CS0_CTRL             0x00001FA0
 206
 207 #endif                          /* _M5208EVBE_H */