include/configs/M5208EVBE.h

   1 /*
   2  * Configuation settings for the Freescale MCF5208EVBe.
   3  *
   4  * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef _M5208EVBE_H
  11 #define _M5208EVBE_H
  12
  13 /*
  14  * High Level Configuration Options
  15  * (easy to change)
  16  */
  17 #define CONFIG_MCFUART
  18 #define CONFIG_SYS_UART_PORT            (0)
  19
  20 #undef CONFIG_WATCHDOG
  21 #define CONFIG_WATCHDOG_TIMEOUT         5000
  22
  23 /* Command line configuration */
  24 #define CONFIG_CMD_REGINFO
  25
  26 #define CONFIG_MCFFEC
  27 #ifdef CONFIG_MCFFEC
  28 #       define CONFIG_MII               1
  29 #       define CONFIG_MII_INIT          1
  30 #       define CONFIG_SYS_DISCOVER_PHY
  31 #       define CONFIG_SYS_RX_ETH_BUFFER 8
  32 #       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  33 #       define CONFIG_HAS_ETH1
  34
  35 #       define CONFIG_SYS_FEC0_PINMUX   0
  36 #       define CONFIG_SYS_FEC0_MIIBASE  CONFIG_SYS_FEC0_IOBASE
  37 #       define MCFFEC_TOUT_LOOP         50000
  38 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  39 #       ifndef CONFIG_SYS_DISCOVER_PHY
  40 #               define FECDUPLEX        FULL
  41 #               define FECSPEED         _100BASET
  42 #       else
  43 #               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  44 #                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  45 #               endif
  46 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
  47 #endif
  48
  49 /* Timer */
  50 #define CONFIG_MCFTMR
  51 #undef CONFIG_MCFPIT
  52
  53 /* I2C */
  54 #define CONFIG_SYS_I2C
  55 #define CONFIG_SYS_I2C_FSL
  56 #define CONFIG_SYS_FSL_I2C_SPEED        80000
  57 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
  58 #define CONFIG_SYS_FSL_I2C_OFFSET       0x58000
  59 #define CONFIG_SYS_IMMR                 CONFIG_SYS_MBAR
  60
  61 #define CONFIG_UDP_CHECKSUM
  62
  63 #ifdef CONFIG_MCFFEC
  64 #       define CONFIG_IPADDR    192.162.1.2
  65 #       define CONFIG_NETMASK   255.255.255.0
  66 #       define CONFIG_SERVERIP  192.162.1.1
  67 #       define CONFIG_GATEWAYIP 192.162.1.1
  68 #endif                          /* CONFIG_MCFFEC */
  69
  70 #define CONFIG_HOSTNAME         M5208EVBe
  71 #define CONFIG_EXTRA_ENV_SETTINGS               \
  72         "netdev=eth0\0"                         \
  73         "loadaddr=40010000\0"                   \
  74         "u-boot=u-boot.bin\0"                   \
  75         "load=tftp ${loadaddr) ${u-boot}\0"     \
  76         "upd=run load; run prog\0"              \
  77         "prog=prot off 0 3ffff;"                \
  78         "era 0 3ffff;"                          \
  79         "cp.b ${loadaddr} 0 ${filesize};"       \
  80         "save\0"                                \
  81         ""
  82
  83 #define CONFIG_PRAM             512     /* 512 KB */
  84 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
  85
  86 #ifdef CONFIG_CMD_KGDB
  87 #       define CONFIG_SYS_CBSIZE        1024    /* Console I/O Buffer Size */
  88 #else
  89 #       define CONFIG_SYS_CBSIZE        256     /* Console I/O Buffer Size */
  90 #endif
  91
  92 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
  93 #define CONFIG_SYS_MAXARGS      16              /* max number of cmd args */
  94 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Arg Buf Sz */
  95 #define CONFIG_SYS_LOAD_ADDR    0x40010000
  96
  97 #define CONFIG_SYS_CLK          166666666       /* CPU Core Clock */
  98 #define CONFIG_SYS_PLL_ODR      0x36
  99 #define CONFIG_SYS_PLL_FDR      0x7D
 100
 101 #define CONFIG_SYS_MBAR         0xFC000000
 102
 103 /*
 104  * Low Level Configuration Settings
 105  * (address mappings, register initial values, etc.)
 106  * You should know what you are doing if you make changes here.
 107  */
 108 /* Definitions for initial stack pointer and data area (in DPRAM) */
 109 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 110 #define CONFIG_SYS_INIT_RAM_SIZE                0x4000  /* Size of used area in internal SRAM */
 111 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 112 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
 113 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 114
 115 /*
 116  * Start addresses for the final memory configuration
 117  * (Set up by the startup code)
 118  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 119  */
 120 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 121 #define CONFIG_SYS_SDRAM_SIZE           32      /* SDRAM size in MB */
 122 #define CONFIG_SYS_SDRAM_CFG1           0x43711630
 123 #define CONFIG_SYS_SDRAM_CFG2           0x56670000
 124 #define CONFIG_SYS_SDRAM_CTRL           0xE1002000
 125 #define CONFIG_SYS_SDRAM_EMOD           0x80010000
 126 #define CONFIG_SYS_SDRAM_MODE           0x00CD0000
 127
 128 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE + 0x400
 129 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 130
 131 #define CONFIG_SYS_MONITOR_BASE         (CONFIG_SYS_FLASH_BASE + 0x400)
 132 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 133
 134 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 135 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc() */
 136
 137 /*
 138  * For booting Linux, the board info and command line data
 139  * have to be in the first 8 MB of memory, since this is
 140  * the maximum mapped by the Linux kernel during initialization ??
 141  */
 142 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 143 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 144
 145 /* FLASH organization */
 146 #define CONFIG_SYS_FLASH_CFI
 147 #ifdef CONFIG_SYS_FLASH_CFI
 148 #       define CONFIG_FLASH_CFI_DRIVER          1
 149 #       define CONFIG_SYS_FLASH_SIZE            0x800000        /* Max size that the board might have */
 150 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 151 #       define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 152 #       define CONFIG_SYS_MAX_FLASH_SECT        254     /* max number of sectors on one chip */
 153 #       define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 154 #endif
 155
 156 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 157
 158 /*
 159  * Configuration for environment
 160  * Environment is embedded in u-boot in the second sector of the flash
 161  */
 162 #define CONFIG_ENV_OFFSET               0x2000
 163 #define CONFIG_ENV_SIZE                 0x1000
 164 #define CONFIG_ENV_SECT_SIZE            0x2000
 165 #define CONFIG_ENV_IS_IN_FLASH          1
 166
 167 #define LDS_BOARD_TEXT \
 168         . = DEFINED(env_offset) ? env_offset : .; \
 169         common/env_embedded.o (.text*);
 170
 171 /* Cache Configuration */
 172 #define CONFIG_SYS_CACHELINE_SIZE       16
 173
 174 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 175                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 176 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 177                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 178 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV | CF_CACR_INVI)
 179 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 180                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 181                                          CF_ACR_EN | CF_ACR_SM_ALL)
 182 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_CINV | \
 183                                          CF_CACR_DISD | CF_CACR_INVI | \
 184                                          CF_CACR_CEIB | CF_CACR_DCM | \
 185                                          CF_CACR_EUSP)
 186
 187 /* Chipselect bank definitions */
 188 /*
 189  * CS0 - NOR Flash
 190  * CS1 - Available
 191  * CS2 - Available
 192  * CS3 - Available
 193  * CS4 - Available
 194  * CS5 - Available
 195  */
 196 #define CONFIG_SYS_CS0_BASE             0
 197 #define CONFIG_SYS_CS0_MASK             0x007F0001
 198 #define CONFIG_SYS_CS0_CTRL             0x00001FA0
 199
 200 #endif                          /* _M5208EVBE_H */