include/configs/M5329EVB.h

   1 /*
   2  * Configuation settings for the Freescale MCF5329 FireEngine board.
   3  *
   4  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * See file CREDITS for list of people who contributed to this
   8  * project.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26 /*
  27  * board/config.h - configuration options, board specific
  28  */
  29
  30 #ifndef _M5329EVB_H
  31 #define _M5329EVB_H
  32
  33 /*
  34  * High Level Configuration Options
  35  * (easy to change)
  36  */
  37 #define CONFIG_MCF532x          /* define processor family */
  38 #define CONFIG_M5329            /* define processor type */
  39
  40 #define CONFIG_MCFUART
  41 #define CONFIG_SYS_UART_PORT            (0)
  42 #define CONFIG_BAUDRATE         115200
  43
  44 #undef CONFIG_WATCHDOG
  45 #define CONFIG_WATCHDOG_TIMEOUT 5000    /* timeout in milliseconds, max timeout is 6.71sec */
  46
  47 /* Command line configuration */
  48 #include <config_cmd_default.h>
  49
  50 #define CONFIG_CMD_CACHE
  51 #define CONFIG_CMD_DATE
  52 #define CONFIG_CMD_ELF
  53 #define CONFIG_CMD_FLASH
  54 #define CONFIG_CMD_I2C
  55 #define CONFIG_CMD_MEMORY
  56 #define CONFIG_CMD_MISC
  57 #define CONFIG_CMD_MII
  58 #define CONFIG_CMD_NET
  59 #define CONFIG_CMD_PING
  60 #define CONFIG_CMD_REGINFO
  61
  62 #ifdef CONFIG_NANDFLASH_SIZE
  63 #      define CONFIG_CMD_NAND
  64 #endif
  65
  66 #define CONFIG_SYS_UNIFY_CACHE
  67
  68 #define CONFIG_MCFFEC
  69 #ifdef CONFIG_MCFFEC
  70 #       define CONFIG_MII               1
  71 #       define CONFIG_MII_INIT          1
  72 #       define CONFIG_SYS_DISCOVER_PHY
  73 #       define CONFIG_SYS_RX_ETH_BUFFER 8
  74 #       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  75
  76 #       define CONFIG_SYS_FEC0_PINMUX           0
  77 #       define CONFIG_SYS_FEC0_MIIBASE          CONFIG_SYS_FEC0_IOBASE
  78 #       define MCFFEC_TOUT_LOOP         50000
  79 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  80 #       ifndef CONFIG_SYS_DISCOVER_PHY
  81 #               define FECDUPLEX        FULL
  82 #               define FECSPEED         _100BASET
  83 #       else
  84 #               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  85 #                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  86 #               endif
  87 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
  88 #endif
  89
  90 #define CONFIG_MCFRTC
  91 #undef RTC_DEBUG
  92
  93 /* Timer */
  94 #define CONFIG_MCFTMR
  95 #undef CONFIG_MCFPIT
  96
  97 /* I2C */
  98 #define CONFIG_FSL_I2C
  99 #define CONFIG_HARD_I2C                 /* I2C with hw support */
 100 #define CONFIG_SYS_I2C_SPEED            80000
 101 #define CONFIG_SYS_I2C_SLAVE            0x7F
 102 #define CONFIG_SYS_I2C_OFFSET           0x58000
 103 #define CONFIG_SYS_IMMR         CONFIG_SYS_MBAR
 104
 105 #define CONFIG_BOOTDELAY        1       /* autoboot after 5 seconds */
 106 #define CONFIG_UDP_CHECKSUM
 107
 108 #ifdef CONFIG_MCFFEC
 109 #       define CONFIG_ETHADDR   00:e0:0c:bc:e5:60
 110 #       define CONFIG_IPADDR    192.162.1.2
 111 #       define CONFIG_NETMASK   255.255.255.0
 112 #       define CONFIG_SERVERIP  192.162.1.1
 113 #       define CONFIG_GATEWAYIP 192.162.1.1
 114 #       define CONFIG_OVERWRITE_ETHADDR_ONCE
 115 #endif                          /* FEC_ENET */
 116
 117 #define CONFIG_HOSTNAME         M5329EVB
 118 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 119         "netdev=eth0\0"                 \
 120         "loadaddr=40010000\0"   \
 121         "u-boot=u-boot.bin\0"   \
 122         "load=tftp ${loadaddr) ${u-boot}\0"     \
 123         "upd=run load; run prog\0"      \
 124         "prog=prot off 0 3ffff;"        \
 125         "era 0 3ffff;"  \
 126         "cp.b ${loadaddr} 0 ${filesize};"       \
 127         "save\0"        \
 128         ""
 129
 130 #define CONFIG_PRAM             512     /* 512 KB */
 131 #define CONFIG_SYS_PROMPT               "-> "
 132 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 133
 134 #ifdef CONFIG_CMD_KGDB
 135 #       define CONFIG_SYS_CBSIZE        1024    /* Console I/O Buffer Size */
 136 #else
 137 #       define CONFIG_SYS_CBSIZE        256     /* Console I/O Buffer Size */
 138 #endif
 139
 140 #define CONFIG_SYS_PBSIZE                       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
 141 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 142 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 143 #define CONFIG_SYS_LOAD_ADDR            0x40010000
 144
 145 #define CONFIG_SYS_HZ                   1000
 146 #define CONFIG_SYS_CLK                  80000000
 147 #define CONFIG_SYS_CPU_CLK              CONFIG_SYS_CLK * 3
 148
 149 #define CONFIG_SYS_MBAR         0xFC000000
 150
 151 #define CONFIG_SYS_LATCH_ADDR           (CONFIG_SYS_CS1_BASE + 0x80000)
 152
 153 /*
 154  * Low Level Configuration Settings
 155  * (address mappings, register initial values, etc.)
 156  * You should know what you are doing if you make changes here.
 157  */
 158 /*-----------------------------------------------------------------------
 159  * Definitions for initial stack pointer and data area (in DPRAM)
 160  */
 161 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 162 #define CONFIG_SYS_INIT_RAM_SIZE        0x8000  /* Size of used area in internal SRAM */
 163 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 164 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
 165 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 166
 167 /*-----------------------------------------------------------------------
 168  * Start addresses for the final memory configuration
 169  * (Set up by the startup code)
 170  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 171  */
 172 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 173 #define CONFIG_SYS_SDRAM_SIZE           32      /* SDRAM size in MB */
 174 #define CONFIG_SYS_SDRAM_CFG1           0x53722730
 175 #define CONFIG_SYS_SDRAM_CFG2           0x56670000
 176 #define CONFIG_SYS_SDRAM_CTRL           0xE1092000
 177 #define CONFIG_SYS_SDRAM_EMOD           0x40010000
 178 #define CONFIG_SYS_SDRAM_MODE           0x018D0000
 179
 180 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE + 0x400
 181 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 182
 183 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
 184 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 185
 186 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 187 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc() */
 188
 189 /*
 190  * For booting Linux, the board info and command line data
 191  * have to be in the first 8 MB of memory, since this is
 192  * the maximum mapped by the Linux kernel during initialization ??
 193  */
 194 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 195 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 196
 197 /*-----------------------------------------------------------------------
 198  * FLASH organization
 199  */
 200 #define CONFIG_SYS_FLASH_CFI
 201 #ifdef CONFIG_SYS_FLASH_CFI
 202 #       define CONFIG_FLASH_CFI_DRIVER  1
 203 #       define CONFIG_SYS_FLASH_SIZE            0x800000        /* Max size that the board might have */
 204 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 205 #       define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 206 #       define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 207 #       define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 208 #endif
 209
 210 #ifdef CONFIG_NANDFLASH_SIZE
 211 #       define CONFIG_SYS_MAX_NAND_DEVICE       1
 212 #       define CONFIG_SYS_NAND_BASE             CONFIG_SYS_CS2_BASE
 213 #       define CONFIG_SYS_NAND_SIZE             1
 214 #       define CONFIG_SYS_NAND_BASE_LIST        { CONFIG_SYS_NAND_BASE }
 215 #       define NAND_ALLOW_ERASE_ALL     1
 216 #       define CONFIG_JFFS2_NAND        1
 217 #       define CONFIG_JFFS2_DEV         "nand0"
 218 #       define CONFIG_JFFS2_PART_SIZE   (CONFIG_SYS_CS2_MASK & ~1)
 219 #       define CONFIG_JFFS2_PART_OFFSET 0x00000000
 220 #endif
 221
 222 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 223
 224 /* Configuration for environment
 225  * Environment is embedded in u-boot in the second sector of the flash
 226  */
 227 #define CONFIG_ENV_OFFSET               0x4000
 228 #define CONFIG_ENV_SECT_SIZE    0x2000
 229 #define CONFIG_ENV_IS_IN_FLASH  1
 230
 231 /*-----------------------------------------------------------------------
 232  * Cache Configuration
 233  */
 234 #define CONFIG_SYS_CACHELINE_SIZE       16
 235
 236 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 237                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 238 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 239                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 240 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINVA)
 241 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 242                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 243                                          CF_ACR_EN | CF_ACR_SM_ALL)
 244 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_EC | CF_CACR_CINVA | \
 245                                          CF_CACR_DCM_P)
 246
 247 /*-----------------------------------------------------------------------
 248  * Chipselect bank definitions
 249  */
 250 /*
 251  * CS0 - NOR Flash 1, 2, 4, or 8MB
 252  * CS1 - CompactFlash and registers
 253  * CS2 - NAND Flash 16, 32, or 64MB
 254  * CS3 - Available
 255  * CS4 - Available
 256  * CS5 - Available
 257  */
 258 #define CONFIG_SYS_CS0_BASE             0
 259 #define CONFIG_SYS_CS0_MASK             0x007f0001
 260 #define CONFIG_SYS_CS0_CTRL             0x00001fa0
 261
 262 #define CONFIG_SYS_CS1_BASE             0x10000000
 263 #define CONFIG_SYS_CS1_MASK             0x001f0001
 264 #define CONFIG_SYS_CS1_CTRL             0x002A3780
 265
 266 #ifdef CONFIG_NANDFLASH_SIZE
 267 #define CONFIG_SYS_CS2_BASE             0x20000000
 268 #define CONFIG_SYS_CS2_MASK             ((CONFIG_NANDFLASH_SIZE << 20) | 1)
 269 #define CONFIG_SYS_CS2_CTRL             0x00001f60
 270 #endif
 271
 272 #endif                          /* _M5329EVB_H */