include/configs/MPC8313ERDB.h

   1 /*
   2  * Copyright (C) Freescale Semiconductor, Inc. 2006, 2010.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22 /*
  23  * mpc8313epb board configuration file
  24  */
  25
  26 #ifndef __CONFIG_H
  27 #define __CONFIG_H
  28
  29 /*
  30  * High Level Configuration Options
  31  */
  32 #define CONFIG_E300             1
  33 #define CONFIG_MPC83xx          1
  34 #define CONFIG_MPC831x          1
  35 #define CONFIG_MPC8313          1
  36 #define CONFIG_MPC8313ERDB      1
  37
  38 #ifdef CONFIG_NAND
  39 #define CONFIG_SPL
  40 #define CONFIG_SPL_INIT_MINIMAL
  41 #define CONFIG_SPL_SERIAL_SUPPORT
  42 #define CONFIG_SPL_NAND_SUPPORT
  43 #define CONFIG_SPL_NAND_MINIMAL
  44 #define CONFIG_SPL_FLUSH_IMAGE
  45 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  46 #define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
  47
  48 #ifdef CONFIG_SPL_BUILD
  49 #define CONFIG_NS16550_MIN_FUNCTIONS
  50 #endif
  51
  52 #define CONFIG_SYS_TEXT_BASE    0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
  53 #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
  54 #define CONFIG_SPL_MAX_SIZE     (4 * 1024)
  55 #define CONFIG_SPL_PAD_TO       0x4000
  56
  57 #define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
  58 #define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
  59 #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
  60 #define CONFIG_SYS_NAND_U_BOOT_OFFS  16384
  61 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
  62 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
  63
  64 #ifdef CONFIG_SPL_BUILD
  65 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
  66 #endif
  67
  68 #endif /* CONFIG_NAND */
  69
  70 #ifndef CONFIG_SYS_TEXT_BASE
  71 #define CONFIG_SYS_TEXT_BASE    0xFE000000
  72 #endif
  73
  74 #ifndef CONFIG_SYS_MONITOR_BASE
  75 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  76 #endif
  77
  78 #define CONFIG_PCI
  79 #define CONFIG_PCI_INDIRECT_BRIDGE
  80 #define CONFIG_FSL_ELBC 1
  81
  82 #define CONFIG_MISC_INIT_R
  83
  84 /*
  85  * On-board devices
  86  *
  87  * TSEC1 is VSC switch
  88  * TSEC2 is SoC TSEC
  89  */
  90 #define CONFIG_VSC7385_ENET
  91 #define CONFIG_TSEC2
  92
  93 #ifdef CONFIG_SYS_66MHZ
  94 #define CONFIG_83XX_CLKIN       66666667        /* in Hz */
  95 #elif defined(CONFIG_SYS_33MHZ)
  96 #define CONFIG_83XX_CLKIN       33333333        /* in Hz */
  97 #else
  98 #error Unknown oscillator frequency.
  99 #endif
 100
 101 #define CONFIG_SYS_CLK_FREQ     CONFIG_83XX_CLKIN
 102
 103 #define CONFIG_BOARD_EARLY_INIT_F               /* call board_early_init_f */
 104 #define CONFIG_BOARD_EARLY_INIT_R               /* call board_early_init_r */
 105
 106 #define CONFIG_SYS_IMMR         0xE0000000
 107
 108 #if defined(CONFIG_NAND) && !defined(CONFIG_SPL_BUILD)
 109 #define CONFIG_DEFAULT_IMMR     CONFIG_SYS_IMMR
 110 #endif
 111
 112 #define CONFIG_SYS_MEMTEST_START        0x00001000
 113 #define CONFIG_SYS_MEMTEST_END          0x07f00000
 114
 115 /* Early revs of this board will lock up hard when attempting
 116  * to access the PMC registers, unless a JTAG debugger is
 117  * connected, or some resistor modifications are made.
 118  */
 119 #define CONFIG_SYS_8313ERDB_BROKEN_PMC 1
 120
 121 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* Arbiter pipeline depth (0-3) */
 122 #define CONFIG_SYS_ACR_RPTCNT           3       /* Arbiter repeat count (0-7) */
 123
 124 /*
 125  * Device configurations
 126  */
 127
 128 /* Vitesse 7385 */
 129
 130 #ifdef CONFIG_VSC7385_ENET
 131
 132 #define CONFIG_TSEC1
 133
 134 /* The flash address and size of the VSC7385 firmware image */
 135 #define CONFIG_VSC7385_IMAGE            0xFE7FE000
 136 #define CONFIG_VSC7385_IMAGE_SIZE       8192
 137
 138 #endif
 139
 140 /*
 141  * DDR Setup
 142  */
 143 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory*/
 144 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
 145 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
 146
 147 /*
 148  * Manually set up DDR parameters, as this board does not
 149  * seem to have the SPD connected to I2C.
 150  */
 151 #define CONFIG_SYS_DDR_SIZE     128             /* MB */
 152 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN \
 153                                 | CSCONFIG_ODT_RD_NEVER \
 154                                 | CSCONFIG_ODT_WR_ONLY_CURRENT \
 155                                 | CSCONFIG_ROW_BIT_13 \
 156                                 | CSCONFIG_COL_BIT_10)
 157                                 /* 0x80010102 */
 158
 159 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 160 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
 161                                 | (0 << TIMING_CFG0_WRT_SHIFT) \
 162                                 | (0 << TIMING_CFG0_RRT_SHIFT) \
 163                                 | (0 << TIMING_CFG0_WWT_SHIFT) \
 164                                 | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
 165                                 | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
 166                                 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
 167                                 | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
 168                                 /* 0x00220802 */
 169 #define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \
 170                                 | (8 << TIMING_CFG1_ACTTOPRE_SHIFT) \
 171                                 | (3 << TIMING_CFG1_ACTTORW_SHIFT) \
 172                                 | (5 << TIMING_CFG1_CASLAT_SHIFT) \
 173                                 | (10 << TIMING_CFG1_REFREC_SHIFT) \
 174                                 | (3 << TIMING_CFG1_WRREC_SHIFT) \
 175                                 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
 176                                 | (2 << TIMING_CFG1_WRTORD_SHIFT))
 177                                 /* 0x3835a322 */
 178 #define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
 179                                 | (5 << TIMING_CFG2_CPO_SHIFT) \
 180                                 | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
 181                                 | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
 182                                 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
 183                                 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
 184                                 | (6 << TIMING_CFG2_FOUR_ACT_SHIFT))
 185                                 /* 0x129048c6 */ /* P9-45,may need tuning */
 186 #define CONFIG_SYS_DDR_INTERVAL ((1296 << SDRAM_INTERVAL_REFINT_SHIFT) \
 187                                 | (1280 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
 188                                 /* 0x05100500 */
 189 #if defined(CONFIG_DDR_2T_TIMING)
 190 #define CONFIG_SYS_SDRAM_CFG    (SDRAM_CFG_SREN \
 191                                 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
 192                                 | SDRAM_CFG_DBW_32 \
 193                                 | SDRAM_CFG_2T_EN)
 194                                 /* 0x43088000 */
 195 #else
 196 #define CONFIG_SYS_SDRAM_CFG    (SDRAM_CFG_SREN \
 197                                 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
 198                                 | SDRAM_CFG_DBW_32)
 199                                 /* 0x43080000 */
 200 #endif
 201 #define CONFIG_SYS_SDRAM_CFG2           0x00401000
 202 /* set burst length to 8 for 32-bit data path */
 203 #define CONFIG_SYS_DDR_MODE     ((0x4448 << SDRAM_MODE_ESD_SHIFT) \
 204                                 | (0x0632 << SDRAM_MODE_SD_SHIFT))
 205                                 /* 0x44480632 */
 206 #define CONFIG_SYS_DDR_MODE_2   0x8000C000
 207
 208 #define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
 209                                 /*0x02000000*/
 210 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
 211                                 | DDRCDR_PZ_NOMZ \
 212                                 | DDRCDR_NZ_NOMZ \
 213                                 | DDRCDR_M_ODR)
 214
 215 /*
 216  * FLASH on the Local Bus
 217  */
 218 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 219 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
 220 #define CONFIG_SYS_FLASH_BASE           0xFE000000      /* start of FLASH   */
 221 #define CONFIG_SYS_FLASH_SIZE           8       /* flash size in MB */
 222 #define CONFIG_SYS_FLASH_PROTECTION     1       /* Use h/w Flash protection. */
 223 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* display empty sectors */
 224 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* buffer up multiple bytes */
 225
 226 #define CONFIG_SYS_NOR_BR_PRELIM        (CONFIG_SYS_FLASH_BASE \
 227                                         | BR_PS_16      /* 16 bit port */ \
 228                                         | BR_MS_GPCM    /* MSEL = GPCM */ \
 229                                         | BR_V)         /* valid */
 230 #define CONFIG_SYS_NOR_OR_PRELIM        (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
 231                                 | OR_GPCM_XACS \
 232                                 | OR_GPCM_SCY_9 \
 233                                 | OR_GPCM_EHTR \
 234                                 | OR_GPCM_EAD)
 235                                 /* 0xFF006FF7   TODO SLOW 16 MB flash size */
 236                                         /* window base at flash base */
 237 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 238                                         /* 16 MB window size */
 239 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_16MB)
 240
 241 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 242 #define CONFIG_SYS_MAX_FLASH_SECT       135     /* sectors per device */
 243
 244 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 245 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 246
 247 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && \
 248         !defined(CONFIG_SPL_BUILD)
 249 #define CONFIG_SYS_RAMBOOT
 250 #endif
 251
 252 #define CONFIG_SYS_INIT_RAM_LOCK        1
 253 #define CONFIG_SYS_INIT_RAM_ADDR        0xFD000000      /* Initial RAM addr */
 254 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000  /* Size of used area in RAM*/
 255
 256 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 257                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 258 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 259
 260 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 261 #define CONFIG_SYS_MONITOR_LEN  (384 * 1024)    /* Reserve 384 kB for Mon */
 262 #define CONFIG_SYS_MALLOC_LEN   (512 * 1024)    /* Reserved for malloc */
 263
 264 /*
 265  * Local Bus LCRR and LBCR regs
 266  */
 267 #define CONFIG_SYS_LCRR_EADC    LCRR_EADC_1
 268 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_4
 269 #define CONFIG_SYS_LBC_LBCR     (0x00040000 /* TODO */ \
 270                                 | (0xFF << LBCR_BMT_SHIFT) \
 271                                 | 0xF)  /* 0x0004ff0f */
 272
 273                                 /* LB refresh timer prescal, 266MHz/32 */
 274 #define CONFIG_SYS_LBC_MRTPR    0x20000000  /*TODO */
 275
 276 /* drivers/mtd/nand/nand.c */
 277 #if defined(CONFIG_NAND) && defined(CONFIG_SPL_BUILD)
 278 #define CONFIG_SYS_NAND_BASE            0xFFF00000
 279 #else
 280 #define CONFIG_SYS_NAND_BASE            0xE2800000
 281 #endif
 282
 283 #define CONFIG_MTD_DEVICE
 284 #define CONFIG_MTD_PARTITION
 285 #define CONFIG_CMD_MTDPARTS
 286 #define MTDIDS_DEFAULT                  "nand0=e2800000.flash"
 287 #define MTDPARTS_DEFAULT                \
 288         "mtdparts=e2800000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
 289
 290 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 291 #define CONFIG_MTD_NAND_VERIFY_WRITE
 292 #define CONFIG_CMD_NAND 1
 293 #define CONFIG_NAND_FSL_ELBC 1
 294 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
 295 #define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024)
 296
 297
 298 #define CONFIG_SYS_NAND_BR_PRELIM       (CONFIG_SYS_NAND_BASE \
 299                                 | BR_DECC_CHK_GEN       /* Use HW ECC */ \
 300                                 | BR_PS_8               /* 8 bit port */ \
 301                                 | BR_MS_FCM             /* MSEL = FCM */ \
 302                                 | BR_V)                 /* valid */
 303 #define CONFIG_SYS_NAND_OR_PRELIM       \
 304                                 (P2SZ_TO_AM(CONFIG_SYS_NAND_WINDOW_SIZE) \
 305                                 | OR_FCM_CSCT \
 306                                 | OR_FCM_CST \
 307                                 | OR_FCM_CHT \
 308                                 | OR_FCM_SCY_1 \
 309                                 | OR_FCM_TRLX \
 310                                 | OR_FCM_EHTR)
 311                                 /* 0xFFFF8396 */
 312
 313 #ifdef CONFIG_NAND
 314 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 315 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
 316 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
 317 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM
 318 #else
 319 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
 320 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
 321 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 322 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
 323 #endif
 324
 325 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_NAND_BASE
 326 #define CONFIG_SYS_LBLAWAR1_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
 327
 328 #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
 329 #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
 330
 331 /* local bus write LED / read status buffer (BCSR) mapping */
 332 #define CONFIG_SYS_BCSR_ADDR            0xFA000000
 333 #define CONFIG_SYS_BCSR_SIZE            (32 * 1024)     /* 0x00008000 */
 334                                         /* map at 0xFA000000 on LCS3 */
 335 #define CONFIG_SYS_BR3_PRELIM           (CONFIG_SYS_BCSR_ADDR \
 336                                         | BR_PS_8       /* 8 bit port */ \
 337                                         | BR_MS_GPCM    /* MSEL = GPCM */ \
 338                                         | BR_V)         /* valid */
 339                                         /* 0xFA000801 */
 340 #define CONFIG_SYS_OR3_PRELIM           (P2SZ_TO_AM(CONFIG_SYS_BCSR_SIZE) \
 341                                         | OR_GPCM_CSNT \
 342                                         | OR_GPCM_ACS_DIV2 \
 343                                         | OR_GPCM_XACS \
 344                                         | OR_GPCM_SCY_15 \
 345                                         | OR_GPCM_TRLX_SET \
 346                                         | OR_GPCM_EHTR_SET \
 347                                         | OR_GPCM_EAD)
 348                                         /* 0xFFFF8FF7 */
 349 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_BCSR_ADDR
 350 #define CONFIG_SYS_LBLAWAR3_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
 351
 352 /* Vitesse 7385 */
 353
 354 #ifdef CONFIG_VSC7385_ENET
 355
 356                                         /* VSC7385 Base address on LCS2 */
 357 #define CONFIG_SYS_VSC7385_BASE         0xF0000000
 358 #define CONFIG_SYS_VSC7385_SIZE         (128 * 1024)    /* 0x00020000 */
 359
 360 #define CONFIG_SYS_BR2_PRELIM           (CONFIG_SYS_VSC7385_BASE \
 361                                         | BR_PS_8       /* 8 bit port */ \
 362                                         | BR_MS_GPCM    /* MSEL = GPCM */ \
 363                                         | BR_V)         /* valid */
 364 #define CONFIG_SYS_OR2_PRELIM           (P2SZ_TO_AM(CONFIG_SYS_VSC7385_SIZE) \
 365                                         | OR_GPCM_CSNT \
 366                                         | OR_GPCM_XACS \
 367                                         | OR_GPCM_SCY_15 \
 368                                         | OR_GPCM_SETA \
 369                                         | OR_GPCM_TRLX_SET \
 370                                         | OR_GPCM_EHTR_SET \
 371                                         | OR_GPCM_EAD)
 372                                         /* 0xFFFE09FF */
 373
 374                                         /* Access window base at VSC7385 base */
 375 #define CONFIG_SYS_LBLAWBAR2_PRELIM     CONFIG_SYS_VSC7385_BASE
 376 #define CONFIG_SYS_LBLAWAR2_PRELIM      (LBLAWAR_EN | LBLAWAR_128KB)
 377
 378 #endif
 379
 380 /* pass open firmware flat tree */
 381 #define CONFIG_OF_LIBFDT        1
 382 #define CONFIG_OF_BOARD_SETUP   1
 383 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 384
 385 #define CONFIG_MPC83XX_GPIO 1
 386 #define CONFIG_CMD_GPIO 1
 387
 388 /*
 389  * Serial Port
 390  */
 391 #define CONFIG_CONS_INDEX       1
 392 #define CONFIG_SYS_NS16550
 393 #define CONFIG_SYS_NS16550_SERIAL
 394 #define CONFIG_SYS_NS16550_REG_SIZE     1
 395
 396 #define CONFIG_SYS_BAUDRATE_TABLE       \
 397         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 398
 399 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 400 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 401
 402 /* Use the HUSH parser */
 403 #define CONFIG_SYS_HUSH_PARSER
 404
 405 /* I2C */
 406 #define CONFIG_SYS_I2C
 407 #define CONFIG_SYS_I2C_FSL
 408 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 409 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 410 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 411 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 412 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 413 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 414 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x69} }
 415
 416 /*
 417  * General PCI
 418  * Addresses are mapped 1-1.
 419  */
 420 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 421 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 422 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 423 #define CONFIG_SYS_PCI1_MMIO_BASE       0x90000000
 424 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 425 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 426 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000
 427 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
 428 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000      /* 1M */
 429
 430 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 431 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057   /* Motorola */
 432
 433 /*
 434  * TSEC
 435  */
 436 #define CONFIG_TSEC_ENET                /* TSEC ethernet support */
 437
 438 #define CONFIG_GMII                     /* MII PHY management */
 439
 440 #ifdef CONFIG_TSEC1
 441 #define CONFIG_HAS_ETH0
 442 #define CONFIG_TSEC1_NAME       "TSEC0"
 443 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 444 #define TSEC1_PHY_ADDR          0x1c
 445 #define TSEC1_FLAGS             TSEC_GIGABIT
 446 #define TSEC1_PHYIDX            0
 447 #endif
 448
 449 #ifdef CONFIG_TSEC2
 450 #define CONFIG_HAS_ETH1
 451 #define CONFIG_TSEC2_NAME       "TSEC1"
 452 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 453 #define TSEC2_PHY_ADDR          4
 454 #define TSEC2_FLAGS             TSEC_GIGABIT
 455 #define TSEC2_PHYIDX            0
 456 #endif
 457
 458
 459 /* Options are: TSEC[0-1] */
 460 #define CONFIG_ETHPRIME                 "TSEC1"
 461
 462 /*
 463  * Configure on-board RTC
 464  */
 465 #define CONFIG_RTC_DS1337
 466 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 467
 468 /*
 469  * Environment
 470  */
 471 #if defined(CONFIG_NAND)
 472         #define CONFIG_ENV_IS_IN_NAND   1
 473         #define CONFIG_ENV_OFFSET               (512 * 1024)
 474         #define CONFIG_ENV_SECT_SIZE    CONFIG_SYS_NAND_BLOCK_SIZE
 475         #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 476         #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 477         #define CONFIG_ENV_RANGE                (CONFIG_ENV_SECT_SIZE * 4)
 478         #define CONFIG_ENV_OFFSET_REDUND        \
 479                                         (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 480 #elif !defined(CONFIG_SYS_RAMBOOT)
 481         #define CONFIG_ENV_IS_IN_FLASH  1
 482         #define CONFIG_ENV_ADDR         \
 483                         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 484         #define CONFIG_ENV_SECT_SIZE    0x10000 /* 64K(one sector) for env */
 485         #define CONFIG_ENV_SIZE         0x2000
 486
 487 /* Address and size of Redundant Environment Sector */
 488 #else
 489         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 490         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 491         #define CONFIG_ENV_SIZE         0x2000
 492 #endif
 493
 494 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 495 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 496
 497 /*
 498  * BOOTP options
 499  */
 500 #define CONFIG_BOOTP_BOOTFILESIZE
 501 #define CONFIG_BOOTP_BOOTPATH
 502 #define CONFIG_BOOTP_GATEWAY
 503 #define CONFIG_BOOTP_HOSTNAME
 504
 505
 506 /*
 507  * Command line configuration.
 508  */
 509 #include <config_cmd_default.h>
 510
 511 #define CONFIG_CMD_PING
 512 #define CONFIG_CMD_DHCP
 513 #define CONFIG_CMD_I2C
 514 #define CONFIG_CMD_MII
 515 #define CONFIG_CMD_DATE
 516 #define CONFIG_CMD_PCI
 517
 518 #if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND)
 519     #undef CONFIG_CMD_SAVEENV
 520     #undef CONFIG_CMD_LOADS
 521 #endif
 522
 523 #define CONFIG_CMDLINE_EDITING 1
 524 #define CONFIG_AUTO_COMPLETE    /* add autocompletion support   */
 525
 526 /*
 527  * Miscellaneous configurable options
 528  */
 529 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 530 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 531 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 532 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 533
 534                                                 /* Print Buffer Size */
 535 #define CONFIG_SYS_PBSIZE       \
 536                         (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 537 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 538                                 /* Boot Argument Buffer Size */
 539 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 540 #define CONFIG_SYS_HZ           1000    /* decrementer freq: 1ms ticks */
 541
 542 /*
 543  * For booting Linux, the board info and command line data
 544  * have to be in the first 256 MB of memory, since this is
 545  * the maximum mapped by the Linux kernel during initialization.
 546  */
 547                                 /* Initial Memory map for Linux*/
 548 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20)
 549
 550 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000      /* PCIHOST  */
 551
 552 #ifdef CONFIG_SYS_66MHZ
 553
 554 /* 66MHz IN, 133MHz CSB, 266 DDR, 266 CORE */
 555 /* 0x62040000 */
 556 #define CONFIG_SYS_HRCW_LOW (\
 557         0x20000000 /* reserved, must be set */ |\
 558         HRCWL_DDRCM |\
 559         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 560         HRCWL_DDR_TO_SCB_CLK_2X1 |\
 561         HRCWL_CSB_TO_CLKIN_2X1 |\
 562         HRCWL_CORE_TO_CSB_2X1)
 563
 564 #define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2)
 565
 566 #elif defined(CONFIG_SYS_33MHZ)
 567
 568 /* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */
 569 /* 0x65040000 */
 570 #define CONFIG_SYS_HRCW_LOW (\
 571         0x20000000 /* reserved, must be set */ |\
 572         HRCWL_DDRCM |\
 573         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 574         HRCWL_DDR_TO_SCB_CLK_2X1 |\
 575         HRCWL_CSB_TO_CLKIN_5X1 |\
 576         HRCWL_CORE_TO_CSB_2X1)
 577
 578 #define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 5)
 579
 580 #endif
 581
 582 #define CONFIG_SYS_HRCW_HIGH_BASE (\
 583         HRCWH_PCI_HOST |\
 584         HRCWH_PCI1_ARBITER_ENABLE |\
 585         HRCWH_CORE_ENABLE |\
 586         HRCWH_BOOTSEQ_DISABLE |\
 587         HRCWH_SW_WATCHDOG_DISABLE |\
 588         HRCWH_TSEC1M_IN_RGMII |\
 589         HRCWH_TSEC2M_IN_RGMII |\
 590         HRCWH_BIG_ENDIAN)
 591
 592 #ifdef CONFIG_NAND
 593 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
 594                        HRCWH_FROM_0XFFF00100 |\
 595                        HRCWH_ROM_LOC_NAND_SP_8BIT |\
 596                        HRCWH_RL_EXT_NAND)
 597 #else
 598 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
 599                        HRCWH_FROM_0X00000100 |\
 600                        HRCWH_ROM_LOC_LOCAL_16BIT |\
 601                        HRCWH_RL_EXT_LEGACY)
 602 #endif
 603
 604 /* System IO Config */
 605 #define CONFIG_SYS_SICRH        (SICRH_TSOBI1 | SICRH_TSOBI2)   /* RGMII */
 606                         /* Enable Internal USB Phy and GPIO on LCD Connector */
 607 #define CONFIG_SYS_SICRL        (SICRL_USBDR_10 | SICRL_LBC)
 608
 609 #define CONFIG_SYS_HID0_INIT    0x000000000
 610 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK | \
 611                                  HID0_ENABLE_INSTRUCTION_CACHE | \
 612                                  HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
 613
 614 #define CONFIG_SYS_HID2 HID2_HBE
 615
 616 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 617
 618 /* DDR @ 0x00000000 */
 619 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW)
 620 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE \
 621                                 | BATU_BL_256M \
 622                                 | BATU_VS \
 623                                 | BATU_VP)
 624
 625 /* PCI @ 0x80000000 */
 626 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW)
 627 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_PCI1_MEM_BASE \
 628                                 | BATU_BL_256M \
 629                                 | BATU_VS \
 630                                 | BATU_VP)
 631 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_MMIO_BASE \
 632                                 | BATL_PP_RW \
 633                                 | BATL_CACHEINHIBIT \
 634                                 | BATL_GUARDEDSTORAGE)
 635 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PCI1_MMIO_BASE \
 636                                 | BATU_BL_256M \
 637                                 | BATU_VS \
 638                                 | BATU_VP)
 639
 640 /* PCI2 not supported on 8313 */
 641 #define CONFIG_SYS_IBAT3L       (0)
 642 #define CONFIG_SYS_IBAT3U       (0)
 643 #define CONFIG_SYS_IBAT4L       (0)
 644 #define CONFIG_SYS_IBAT4U       (0)
 645
 646 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
 647 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_IMMR \
 648                                 | BATL_PP_RW \
 649                                 | BATL_CACHEINHIBIT \
 650                                 | BATL_GUARDEDSTORAGE)
 651 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_IMMR \
 652                                 | BATU_BL_256M \
 653                                 | BATU_VS \
 654                                 | BATU_VP)
 655
 656 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
 657 #define CONFIG_SYS_IBAT6L       (0xF0000000 | BATL_PP_RW | BATL_GUARDEDSTORAGE)
 658 #define CONFIG_SYS_IBAT6U       (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 659
 660 #define CONFIG_SYS_IBAT7L       (0)
 661 #define CONFIG_SYS_IBAT7U       (0)
 662
 663 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 664 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 665 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 666 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 667 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 668 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 669 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 670 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 671 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 672 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 673 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 674 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 675 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 676 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 677 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 678 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 679
 680 /*
 681  * Environment Configuration
 682  */
 683 #define CONFIG_ENV_OVERWRITE
 684
 685 #define CONFIG_NETDEV           "eth1"
 686
 687 #define CONFIG_HOSTNAME         mpc8313erdb
 688 #define CONFIG_ROOTPATH         "/nfs/root/path"
 689 #define CONFIG_BOOTFILE         "uImage"
 690                                 /* U-Boot image on TFTP server */
 691 #define CONFIG_UBOOTPATH        "u-boot.bin"
 692 #define CONFIG_FDTFILE          "mpc8313erdb.dtb"
 693
 694                                 /* default location for tftp and bootm */
 695 #define CONFIG_LOADADDR         800000
 696 #define CONFIG_BOOTDELAY        6       /* -1 disables auto-boot */
 697 #define CONFIG_BAUDRATE         115200
 698
 699 #define CONFIG_EXTRA_ENV_SETTINGS \
 700         "netdev=" CONFIG_NETDEV "\0"                                    \
 701         "ethprime=TSEC1\0"                                              \
 702         "uboot=" CONFIG_UBOOTPATH "\0"                                  \
 703         "tftpflash=tftpboot $loadaddr $uboot; "                         \
 704                 "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
 705                         " +$filesize; " \
 706                 "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
 707                         " +$filesize; " \
 708                 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
 709                         " $filesize; "  \
 710                 "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
 711                         " +$filesize; " \
 712                 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
 713                         " $filesize\0"  \
 714         "fdtaddr=780000\0"                                              \
 715         "fdtfile=" CONFIG_FDTFILE "\0"                                  \
 716         "console=ttyS0\0"                                               \
 717         "setbootargs=setenv bootargs "                                  \
 718                 "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
 719         "setipargs=setenv bootargs nfsroot=$serverip:$rootpath "         \
 720                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"\
 721                                                         "$netdev:off " \
 722                 "root=$rootdev rw console=$console,$baudrate $othbootargs\0"
 723
 724 #define CONFIG_NFSBOOTCOMMAND                                           \
 725         "setenv rootdev /dev/nfs;"                                      \
 726         "run setbootargs;"                                              \
 727         "run setipargs;"                                                \
 728         "tftp $loadaddr $bootfile;"                                     \
 729         "tftp $fdtaddr $fdtfile;"                                       \
 730         "bootm $loadaddr - $fdtaddr"
 731
 732 #define CONFIG_RAMBOOTCOMMAND                                           \
 733         "setenv rootdev /dev/ram;"                                      \
 734         "run setbootargs;"                                              \
 735         "tftp $ramdiskaddr $ramdiskfile;"                               \
 736         "tftp $loadaddr $bootfile;"                                     \
 737         "tftp $fdtaddr $fdtfile;"                                       \
 738         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 739
 740 #endif  /* __CONFIG_H */