include/configs/MPC8313ERDB.h

   1 /*
   2  * Copyright (C) Freescale Semiconductor, Inc. 2006, 2010.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22 /*
  23  * mpc8313epb board configuration file
  24  */
  25
  26 #ifndef __CONFIG_H
  27 #define __CONFIG_H
  28
  29 /*
  30  * High Level Configuration Options
  31  */
  32 #define CONFIG_E300             1
  33 #define CONFIG_MPC83xx          1
  34 #define CONFIG_MPC831x          1
  35 #define CONFIG_MPC8313          1
  36 #define CONFIG_MPC8313ERDB      1
  37
  38 #define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
  39 #define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
  40 #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
  41 #define CONFIG_SYS_NAND_U_BOOT_OFFS  16384
  42 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
  43 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
  44
  45 #ifdef CONFIG_NAND_U_BOOT
  46 #define CONFIG_SYS_TEXT_BASE    0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
  47 #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
  48 #ifdef CONFIG_NAND_SPL
  49 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
  50 #endif /* CONFIG_NAND_SPL */
  51 #endif /* CONFIG_NAND_U_BOOT */
  52
  53 #ifndef CONFIG_SYS_TEXT_BASE
  54 #define CONFIG_SYS_TEXT_BASE    0xFE000000
  55 #endif
  56
  57 #ifndef CONFIG_SYS_MONITOR_BASE
  58 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  59 #endif
  60
  61 #define CONFIG_PCI
  62 #define CONFIG_FSL_ELBC 1
  63
  64 #define CONFIG_MISC_INIT_R
  65
  66 /*
  67  * On-board devices
  68  *
  69  * TSEC1 is VSC switch
  70  * TSEC2 is SoC TSEC
  71  */
  72 #define CONFIG_VSC7385_ENET
  73 #define CONFIG_TSEC2
  74
  75 #ifdef CONFIG_SYS_66MHZ
  76 #define CONFIG_83XX_CLKIN       66666667        /* in Hz */
  77 #elif defined(CONFIG_SYS_33MHZ)
  78 #define CONFIG_83XX_CLKIN       33333333        /* in Hz */
  79 #else
  80 #error Unknown oscillator frequency.
  81 #endif
  82
  83 #define CONFIG_SYS_CLK_FREQ     CONFIG_83XX_CLKIN
  84
  85 #define CONFIG_BOARD_EARLY_INIT_F               /* call board_pre_init */
  86
  87 #define CONFIG_SYS_IMMR         0xE0000000
  88
  89 #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
  90 #define CONFIG_DEFAULT_IMMR     CONFIG_SYS_IMMR
  91 #endif
  92
  93 #define CONFIG_SYS_MEMTEST_START        0x00001000
  94 #define CONFIG_SYS_MEMTEST_END          0x07f00000
  95
  96 /* Early revs of this board will lock up hard when attempting
  97  * to access the PMC registers, unless a JTAG debugger is
  98  * connected, or some resistor modifications are made.
  99  */
 100 #define CONFIG_SYS_8313ERDB_BROKEN_PMC 1
 101
 102 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* Arbiter pipeline depth (0-3) */
 103 #define CONFIG_SYS_ACR_RPTCNT           3       /* Arbiter repeat count (0-7) */
 104
 105 /*
 106  * Device configurations
 107  */
 108
 109 /* Vitesse 7385 */
 110
 111 #ifdef CONFIG_VSC7385_ENET
 112
 113 #define CONFIG_TSEC1
 114
 115 /* The flash address and size of the VSC7385 firmware image */
 116 #define CONFIG_VSC7385_IMAGE            0xFE7FE000
 117 #define CONFIG_VSC7385_IMAGE_SIZE       8192
 118
 119 #endif
 120
 121 /*
 122  * DDR Setup
 123  */
 124 #define CONFIG_SYS_DDR_BASE             0x00000000      /* DDR is system memory*/
 125 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
 126 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
 127
 128 /*
 129  * Manually set up DDR parameters, as this board does not
 130  * seem to have the SPD connected to I2C.
 131  */
 132 #define CONFIG_SYS_DDR_SIZE             128             /* MB */
 133 #define CONFIG_SYS_DDR_CONFIG           ( CSCONFIG_EN \
 134                                 | 0x00010000 /* TODO */ \
 135                                 | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 )
 136                                 /* 0x80010102 */
 137
 138 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 139 #define CONFIG_SYS_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
 140                                 | ( 0 << TIMING_CFG0_WRT_SHIFT ) \
 141                                 | ( 0 << TIMING_CFG0_RRT_SHIFT ) \
 142                                 | ( 0 << TIMING_CFG0_WWT_SHIFT ) \
 143                                 | ( 2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
 144                                 | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
 145                                 | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
 146                                 | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
 147                                 /* 0x00220802 */
 148 #define CONFIG_SYS_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
 149                                 | ( 8 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
 150                                 | ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
 151                                 | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
 152                                 | (10 << TIMING_CFG1_REFREC_SHIFT ) \
 153                                 | ( 3 << TIMING_CFG1_WRREC_SHIFT ) \
 154                                 | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
 155                                 | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
 156                                 /* 0x3835a322 */
 157 #define CONFIG_SYS_DDR_TIMING_2 ( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
 158                                 | ( 5 << TIMING_CFG2_CPO_SHIFT ) \
 159                                 | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
 160                                 | ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
 161                                 | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
 162                                 | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
 163                                 | ( 6 << TIMING_CFG2_FOUR_ACT_SHIFT) )
 164                                 /* 0x129048c6 */ /* P9-45,may need tuning */
 165 #define CONFIG_SYS_DDR_INTERVAL ( ( 1296 << SDRAM_INTERVAL_REFINT_SHIFT ) \
 166                                 | ( 1280 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
 167                                 /* 0x05100500 */
 168 #if defined(CONFIG_DDR_2T_TIMING)
 169 #define CONFIG_SYS_SDRAM_CFG            ( SDRAM_CFG_SREN \
 170                                 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
 171                                 | SDRAM_CFG_2T_EN \
 172                                 | SDRAM_CFG_DBW_32 )
 173 #else
 174 #define CONFIG_SYS_SDRAM_CFG            ( SDRAM_CFG_SREN \
 175                                 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
 176                                 | SDRAM_CFG_32_BE )
 177                                 /* 0x43080000 */
 178 #endif
 179 #define CONFIG_SYS_SDRAM_CFG2           0x00401000
 180 /* set burst length to 8 for 32-bit data path */
 181 #define CONFIG_SYS_DDR_MODE             ( ( 0x4448 << SDRAM_MODE_ESD_SHIFT ) \
 182                                 | ( 0x0632 << SDRAM_MODE_SD_SHIFT ) )
 183                                 /* 0x44480632 */
 184 #define CONFIG_SYS_DDR_MODE_2           0x8000C000
 185
 186 #define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
 187                                 /*0x02000000*/
 188 #define CONFIG_SYS_DDRCDR_VALUE ( DDRCDR_EN \
 189                                 | DDRCDR_PZ_NOMZ \
 190                                 | DDRCDR_NZ_NOMZ \
 191                                 | DDRCDR_M_ODR )
 192
 193 /*
 194  * FLASH on the Local Bus
 195  */
 196 #define CONFIG_SYS_FLASH_CFI                            /* use the Common Flash Interface */
 197 #define CONFIG_FLASH_CFI_DRIVER                 /* use the CFI driver */
 198 #define CONFIG_SYS_FLASH_BASE           0xFE000000      /* start of FLASH   */
 199 #define CONFIG_SYS_FLASH_SIZE           8               /* flash size in MB */
 200 #define CONFIG_SYS_FLASH_PROTECTION     1               /* Use h/w Flash protection. */
 201 #define CONFIG_SYS_FLASH_EMPTY_INFO                     /* display empty sectors */
 202 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE               /* buffer up multiple bytes */
 203
 204 #define CONFIG_SYS_NOR_BR_PRELIM        (CONFIG_SYS_FLASH_BASE |        /* flash Base address */ \
 205                                 (2 << BR_PS_SHIFT) |    /* 16 bit port size */ \
 206                                 BR_V)                   /* valid */
 207 #define CONFIG_SYS_NOR_OR_PRELIM        ( 0xFF800000            /* 8 MByte */ \
 208                                 | OR_GPCM_XACS \
 209                                 | OR_GPCM_SCY_9 \
 210                                 | OR_GPCM_EHTR \
 211                                 | OR_GPCM_EAD )
 212                                 /* 0xFF006FF7   TODO SLOW 16 MB flash size */
 213 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE   /* window base at flash base */
 214 #define CONFIG_SYS_LBLAWAR0_PRELIM      0x80000017      /* 16 MB window size */
 215
 216 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
 217 #define CONFIG_SYS_MAX_FLASH_SECT       135             /* sectors per device */
 218
 219 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 220 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 221
 222 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && !defined(CONFIG_NAND_SPL)
 223 #define CONFIG_SYS_RAMBOOT
 224 #endif
 225
 226 #define CONFIG_SYS_INIT_RAM_LOCK        1
 227 #define CONFIG_SYS_INIT_RAM_ADDR        0xFD000000      /* Initial RAM address */
 228 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000          /* Size of used area in RAM*/
 229
 230 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 231 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 232
 233 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 234 #define CONFIG_SYS_MONITOR_LEN          (384 * 1024)    /* Reserve 384 kB for Mon */
 235 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024)    /* Reserved for malloc */
 236
 237 /*
 238  * Local Bus LCRR and LBCR regs
 239  */
 240 #define CONFIG_SYS_LCRR_EADC    LCRR_EADC_1
 241 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_4
 242 #define CONFIG_SYS_LBC_LBCR     ( 0x00040000 /* TODO */ \
 243                         | (0xFF << LBCR_BMT_SHIFT) \
 244                         | 0xF ) /* 0x0004ff0f */
 245
 246 #define CONFIG_SYS_LBC_MRTPR    0x20000000  /*TODO */   /* LB refresh timer prescal, 266MHz/32 */
 247
 248 /* drivers/mtd/nand/nand.c */
 249 #ifdef CONFIG_NAND_SPL
 250 #define CONFIG_SYS_NAND_BASE            0xFFF00000
 251 #else
 252 #define CONFIG_SYS_NAND_BASE            0xE2800000
 253 #endif
 254
 255 #define CONFIG_MTD_DEVICE
 256 #define CONFIG_MTD_PARTITION
 257 #define CONFIG_CMD_MTDPARTS
 258 #define MTDIDS_DEFAULT                  "nand0=e2800000.flash"
 259 #define MTDPARTS_DEFAULT                \
 260         "mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
 261
 262 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 263 #define CONFIG_MTD_NAND_VERIFY_WRITE
 264 #define CONFIG_CMD_NAND 1
 265 #define CONFIG_NAND_FSL_ELBC 1
 266 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
 267
 268
 269 #define CONFIG_SYS_NAND_BR_PRELIM       ( CONFIG_SYS_NAND_BASE \
 270                                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 271                                 | BR_PS_8               /* Port Size = 8 bit */ \
 272                                 | BR_MS_FCM             /* MSEL = FCM */ \
 273                                 | BR_V )                /* valid */
 274 #define CONFIG_SYS_NAND_OR_PRELIM       ( 0xFFFF8000            /* length 32K */ \
 275                                 | OR_FCM_CSCT \
 276                                 | OR_FCM_CST \
 277                                 | OR_FCM_CHT \
 278                                 | OR_FCM_SCY_1 \
 279                                 | OR_FCM_TRLX \
 280                                 | OR_FCM_EHTR )
 281                                 /* 0xFFFF8396 */
 282
 283 #ifdef CONFIG_NAND_U_BOOT
 284 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 285 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
 286 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
 287 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM
 288 #else
 289 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
 290 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
 291 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 292 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
 293 #endif
 294
 295 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_NAND_BASE
 296 #define CONFIG_SYS_LBLAWAR1_PRELIM      0x8000000E      /* 32KB  */
 297
 298 #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
 299 #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
 300
 301 /* local bus read write buffer mapping */
 302 #define CONFIG_SYS_BR3_PRELIM           0xFA000801      /* map at 0xFA000000 */
 303 #define CONFIG_SYS_OR3_PRELIM           0xFFFF8FF7      /* 32kB */
 304 #define CONFIG_SYS_LBLAWBAR3_PRELIM     0xFA000000
 305 #define CONFIG_SYS_LBLAWAR3_PRELIM      0x8000000E      /* 32KB  */
 306
 307 /* Vitesse 7385 */
 308
 309 #define CONFIG_SYS_VSC7385_BASE 0xF0000000
 310
 311 #ifdef CONFIG_VSC7385_ENET
 312
 313 #define CONFIG_SYS_BR2_PRELIM           0xf0000801      /* VSC7385 Base address */
 314 #define CONFIG_SYS_OR2_PRELIM           0xfffe09ff      /* VSC7385, 128K bytes*/
 315 #define CONFIG_SYS_LBLAWBAR2_PRELIM     CONFIG_SYS_VSC7385_BASE/* Access window base at VSC7385 base */
 316 #define CONFIG_SYS_LBLAWAR2_PRELIM      0x80000010      /* Access window size 128K */
 317
 318 #endif
 319
 320 /* pass open firmware flat tree */
 321 #define CONFIG_OF_LIBFDT        1
 322 #define CONFIG_OF_BOARD_SETUP   1
 323 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 324
 325 /*
 326  * Serial Port
 327  */
 328 #define CONFIG_CONS_INDEX       1
 329 #define CONFIG_SYS_NS16550
 330 #define CONFIG_SYS_NS16550_SERIAL
 331 #define CONFIG_SYS_NS16550_REG_SIZE     1
 332
 333 #define CONFIG_SYS_BAUDRATE_TABLE       \
 334         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 335
 336 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 337 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 338
 339 /* Use the HUSH parser */
 340 #define CONFIG_SYS_HUSH_PARSER
 341 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 342
 343 /* I2C */
 344 #define CONFIG_HARD_I2C                 /* I2C with hardware support*/
 345 #define CONFIG_FSL_I2C
 346 #define CONFIG_I2C_MULTI_BUS
 347 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 348 #define CONFIG_SYS_I2C_SLAVE            0x7F
 349 #define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
 350 #define CONFIG_SYS_I2C_OFFSET           0x3000
 351 #define CONFIG_SYS_I2C2_OFFSET          0x3100
 352
 353 /*
 354  * General PCI
 355  * Addresses are mapped 1-1.
 356  */
 357 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 358 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 359 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 360 #define CONFIG_SYS_PCI1_MMIO_BASE       0x90000000
 361 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 362 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 363 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000
 364 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
 365 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000      /* 1M */
 366
 367 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 368 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057   /* Motorola */
 369
 370 /*
 371  * TSEC
 372  */
 373 #define CONFIG_TSEC_ENET                /* TSEC ethernet support */
 374
 375 #define CONFIG_NET_MULTI
 376 #define CONFIG_GMII                     /* MII PHY management */
 377
 378 #ifdef CONFIG_TSEC1
 379 #define CONFIG_HAS_ETH0
 380 #define CONFIG_TSEC1_NAME       "TSEC0"
 381 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 382 #define TSEC1_PHY_ADDR          0x1c
 383 #define TSEC1_FLAGS             TSEC_GIGABIT
 384 #define TSEC1_PHYIDX            0
 385 #endif
 386
 387 #ifdef CONFIG_TSEC2
 388 #define CONFIG_HAS_ETH1
 389 #define CONFIG_TSEC2_NAME       "TSEC1"
 390 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 391 #define TSEC2_PHY_ADDR          4
 392 #define TSEC2_FLAGS             TSEC_GIGABIT
 393 #define TSEC2_PHYIDX            0
 394 #endif
 395
 396
 397 /* Options are: TSEC[0-1] */
 398 #define CONFIG_ETHPRIME                 "TSEC1"
 399
 400 /*
 401  * Configure on-board RTC
 402  */
 403 #define CONFIG_RTC_DS1337
 404 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 405
 406 /*
 407  * Environment
 408  */
 409 #if defined(CONFIG_NAND_U_BOOT)
 410         #define CONFIG_ENV_IS_IN_NAND   1
 411         #define CONFIG_ENV_OFFSET               (512 * 1024)
 412         #define CONFIG_ENV_SECT_SIZE    CONFIG_SYS_NAND_BLOCK_SIZE
 413         #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 414         #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 415         #define CONFIG_ENV_RANGE                (CONFIG_ENV_SECT_SIZE * 4)
 416         #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 417 #elif !defined(CONFIG_SYS_RAMBOOT)
 418         #define CONFIG_ENV_IS_IN_FLASH  1
 419         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 420         #define CONFIG_ENV_SECT_SIZE    0x10000 /* 64K(one sector) for env */
 421         #define CONFIG_ENV_SIZE         0x2000
 422
 423 /* Address and size of Redundant Environment Sector */
 424 #else
 425         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 426         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 427         #define CONFIG_ENV_SIZE         0x2000
 428 #endif
 429
 430 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 431 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 432
 433 /*
 434  * BOOTP options
 435  */
 436 #define CONFIG_BOOTP_BOOTFILESIZE
 437 #define CONFIG_BOOTP_BOOTPATH
 438 #define CONFIG_BOOTP_GATEWAY
 439 #define CONFIG_BOOTP_HOSTNAME
 440
 441
 442 /*
 443  * Command line configuration.
 444  */
 445 #include <config_cmd_default.h>
 446
 447 #define CONFIG_CMD_PING
 448 #define CONFIG_CMD_DHCP
 449 #define CONFIG_CMD_I2C
 450 #define CONFIG_CMD_MII
 451 #define CONFIG_CMD_DATE
 452 #define CONFIG_CMD_PCI
 453
 454 #if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
 455     #undef CONFIG_CMD_SAVEENV
 456     #undef CONFIG_CMD_LOADS
 457 #endif
 458
 459 #define CONFIG_CMDLINE_EDITING 1
 460 #define CONFIG_AUTO_COMPLETE    /* add autocompletion support   */
 461
 462 /*
 463  * Miscellaneous configurable options
 464  */
 465 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 466 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 467 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 468 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 469
 470 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)      /* Print Buffer Size */
 471 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 472 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 473 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 474
 475 /*
 476  * For booting Linux, the board info and command line data
 477  * have to be in the first 256 MB of memory, since this is
 478  * the maximum mapped by the Linux kernel during initialization.
 479  */
 480 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20)     /* Initial Memory map for Linux*/
 481
 482 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000      /* PCIHOST  */
 483
 484 #ifdef CONFIG_SYS_66MHZ
 485
 486 /* 66MHz IN, 133MHz CSB, 266 DDR, 266 CORE */
 487 /* 0x62040000 */
 488 #define CONFIG_SYS_HRCW_LOW (\
 489         0x20000000 /* reserved, must be set */ |\
 490         HRCWL_DDRCM |\
 491         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 492         HRCWL_DDR_TO_SCB_CLK_2X1 |\
 493         HRCWL_CSB_TO_CLKIN_2X1 |\
 494         HRCWL_CORE_TO_CSB_2X1)
 495
 496 #define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2)
 497
 498 #elif defined(CONFIG_SYS_33MHZ)
 499
 500 /* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */
 501 /* 0x65040000 */
 502 #define CONFIG_SYS_HRCW_LOW (\
 503         0x20000000 /* reserved, must be set */ |\
 504         HRCWL_DDRCM |\
 505         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 506         HRCWL_DDR_TO_SCB_CLK_2X1 |\
 507         HRCWL_CSB_TO_CLKIN_5X1 |\
 508         HRCWL_CORE_TO_CSB_2X1)
 509
 510 #define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 5)
 511
 512 #endif
 513
 514 #define CONFIG_SYS_HRCW_HIGH_BASE (\
 515         HRCWH_PCI_HOST |\
 516         HRCWH_PCI1_ARBITER_ENABLE |\
 517         HRCWH_CORE_ENABLE |\
 518         HRCWH_BOOTSEQ_DISABLE |\
 519         HRCWH_SW_WATCHDOG_DISABLE |\
 520         HRCWH_TSEC1M_IN_RGMII |\
 521         HRCWH_TSEC2M_IN_RGMII |\
 522         HRCWH_BIG_ENDIAN)
 523
 524 #ifdef CONFIG_NAND_SPL
 525 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
 526                        HRCWH_FROM_0XFFF00100 |\
 527                        HRCWH_ROM_LOC_NAND_SP_8BIT |\
 528                        HRCWH_RL_EXT_NAND)
 529 #else
 530 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
 531                        HRCWH_FROM_0X00000100 |\
 532                        HRCWH_ROM_LOC_LOCAL_16BIT |\
 533                        HRCWH_RL_EXT_LEGACY)
 534 #endif
 535
 536 /* System IO Config */
 537 #define CONFIG_SYS_SICRH        (SICRH_TSOBI1 | SICRH_TSOBI2)   /* RGMII */
 538 #define CONFIG_SYS_SICRL        SICRL_USBDR_10                  /* Enable Internal USB Phy  */
 539
 540 #define CONFIG_SYS_HID0_INIT    0x000000000
 541 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK | \
 542                                  HID0_ENABLE_INSTRUCTION_CACHE | \
 543                                  HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
 544
 545 #define CONFIG_SYS_HID2 HID2_HBE
 546
 547 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 548
 549 /* DDR @ 0x00000000 */
 550 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_10)
 551 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 552
 553 /* PCI @ 0x80000000 */
 554 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10)
 555 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 556 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 557 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 558
 559 /* PCI2 not supported on 8313 */
 560 #define CONFIG_SYS_IBAT3L       (0)
 561 #define CONFIG_SYS_IBAT3U       (0)
 562 #define CONFIG_SYS_IBAT4L       (0)
 563 #define CONFIG_SYS_IBAT4U       (0)
 564
 565 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
 566 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 567 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
 568
 569 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
 570 #define CONFIG_SYS_IBAT6L       (0xF0000000 | BATL_PP_10 | BATL_GUARDEDSTORAGE)
 571 #define CONFIG_SYS_IBAT6U       (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 572
 573 #define CONFIG_SYS_IBAT7L       (0)
 574 #define CONFIG_SYS_IBAT7U       (0)
 575
 576 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 577 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 578 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 579 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 580 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 581 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 582 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 583 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 584 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 585 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 586 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 587 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 588 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 589 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 590 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 591 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 592
 593 /*
 594  * Environment Configuration
 595  */
 596 #define CONFIG_ENV_OVERWRITE
 597
 598 #define CONFIG_NETDEV           eth1
 599
 600 #define CONFIG_HOSTNAME         mpc8313erdb
 601 #define CONFIG_ROOTPATH         /nfs/root/path
 602 #define CONFIG_BOOTFILE         uImage
 603 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 604 #define CONFIG_FDTFILE          mpc8313erdb.dtb
 605
 606 #define CONFIG_LOADADDR         800000  /* default location for tftp and bootm */
 607 #define CONFIG_BOOTDELAY        6       /* -1 disables auto-boot */
 608 #define CONFIG_BAUDRATE         115200
 609
 610 #define XMK_STR(x)      #x
 611 #define MK_STR(x)       XMK_STR(x)
 612
 613 #define CONFIG_EXTRA_ENV_SETTINGS \
 614         "netdev=" MK_STR(CONFIG_NETDEV) "\0"                            \
 615         "ethprime=TSEC1\0"                                              \
 616         "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                          \
 617         "tftpflash=tftpboot $loadaddr $uboot; "                         \
 618                 "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "     \
 619                 "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "           \
 620                 "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "   \
 621                 "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "              \
 622                 "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"  \
 623         "fdtaddr=780000\0"                                              \
 624         "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"                          \
 625         "console=ttyS0\0"                                               \
 626         "setbootargs=setenv bootargs "                                  \
 627                 "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
 628         "setipargs=setenv bootargs nfsroot=$serverip:$rootpath "         \
 629                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 630                 "root=$rootdev rw console=$console,$baudrate $othbootargs\0"
 631
 632 #define CONFIG_NFSBOOTCOMMAND                                           \
 633         "setenv rootdev /dev/nfs;"                                      \
 634         "run setbootargs;"                                              \
 635         "run setipargs;"                                                \
 636         "tftp $loadaddr $bootfile;"                                     \
 637         "tftp $fdtaddr $fdtfile;"                                       \
 638         "bootm $loadaddr - $fdtaddr"
 639
 640 #define CONFIG_RAMBOOTCOMMAND                                           \
 641         "setenv rootdev /dev/ram;"                                      \
 642         "run setbootargs;"                                              \
 643         "tftp $ramdiskaddr $ramdiskfile;"                               \
 644         "tftp $loadaddr $bootfile;"                                     \
 645         "tftp $fdtaddr $fdtfile;"                                       \
 646         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 647
 648 #undef MK_STR
 649 #undef XMK_STR
 650
 651 #endif  /* __CONFIG_H */