include/configs/MPC832XEMDS.h

   1 /*
   2  * Copyright (C) 2006 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_SYS_GENERIC_BOARD
  11 #define CONFIG_DISPLAY_BOARDINFO
  12
  13 /*
  14  * High Level Configuration Options
  15  */
  16 #define CONFIG_E300             1       /* E300 family */
  17 #define CONFIG_QE               1       /* Has QE */
  18 #define CONFIG_MPC832x          1       /* MPC832x CPU specific */
  19 #define CONFIG_MPC832XEMDS      1       /* MPC832XEMDS board specific */
  20
  21 #define CONFIG_SYS_TEXT_BASE    0xFE000000
  22
  23 /*
  24  * System Clock Setup
  25  */
  26 #ifdef CONFIG_PCISLAVE
  27 #define CONFIG_83XX_PCICLK      66000000        /* in HZ */
  28 #else
  29 #define CONFIG_83XX_CLKIN       66000000        /* in Hz */
  30 #endif
  31
  32 #ifndef CONFIG_SYS_CLK_FREQ
  33 #define CONFIG_SYS_CLK_FREQ     66000000
  34 #endif
  35
  36 /*
  37  * Hardware Reset Configuration Word
  38  */
  39 #define CONFIG_SYS_HRCW_LOW (\
  40         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
  41         HRCWL_DDR_TO_SCB_CLK_2X1 |\
  42         HRCWL_VCO_1X2 |\
  43         HRCWL_CSB_TO_CLKIN_2X1 |\
  44         HRCWL_CORE_TO_CSB_2X1 |\
  45         HRCWL_CE_PLL_VCO_DIV_2 |\
  46         HRCWL_CE_PLL_DIV_1X1 |\
  47         HRCWL_CE_TO_PLL_1X3)
  48
  49 #ifdef CONFIG_PCISLAVE
  50 #define CONFIG_SYS_HRCW_HIGH (\
  51         HRCWH_PCI_AGENT |\
  52         HRCWH_PCI1_ARBITER_DISABLE |\
  53         HRCWH_CORE_ENABLE |\
  54         HRCWH_FROM_0XFFF00100 |\
  55         HRCWH_BOOTSEQ_DISABLE |\
  56         HRCWH_SW_WATCHDOG_DISABLE |\
  57         HRCWH_ROM_LOC_LOCAL_16BIT |\
  58         HRCWH_BIG_ENDIAN |\
  59         HRCWH_LALE_NORMAL)
  60 #else
  61 #define CONFIG_SYS_HRCW_HIGH (\
  62         HRCWH_PCI_HOST |\
  63         HRCWH_PCI1_ARBITER_ENABLE |\
  64         HRCWH_CORE_ENABLE |\
  65         HRCWH_FROM_0X00000100 |\
  66         HRCWH_BOOTSEQ_DISABLE |\
  67         HRCWH_SW_WATCHDOG_DISABLE |\
  68         HRCWH_ROM_LOC_LOCAL_16BIT |\
  69         HRCWH_BIG_ENDIAN |\
  70         HRCWH_LALE_NORMAL)
  71 #endif
  72
  73 /*
  74  * System IO Config
  75  */
  76 #define CONFIG_SYS_SICRL                0x00000000
  77
  78 #define CONFIG_BOARD_EARLY_INIT_F       /* call board_pre_init */
  79 #define CONFIG_BOARD_EARLY_INIT_R
  80
  81 /*
  82  * IMMR new address
  83  */
  84 #define CONFIG_SYS_IMMR         0xE0000000
  85
  86 /*
  87  * DDR Setup
  88  */
  89 #define CONFIG_SYS_DDR_BASE     0x00000000      /* DDR is system memory */
  90 #define CONFIG_SYS_SDRAM_BASE   CONFIG_SYS_DDR_BASE
  91 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
  92 #define CONFIG_SYS_DDRCDR       0x73000002      /* DDR II voltage is 1.8V */
  93
  94 #undef CONFIG_SPD_EEPROM
  95 #if defined(CONFIG_SPD_EEPROM)
  96 /* Determine DDR configuration from I2C interface
  97  */
  98 #define SPD_EEPROM_ADDRESS      0x51    /* DDR SODIMM */
  99 #else
 100 /* Manually set up DDR parameters
 101  */
 102 #define CONFIG_SYS_DDR_SIZE             128     /* MB */
 103 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN \
 104                                         | CSCONFIG_AP \
 105                                         | CSCONFIG_ODT_WR_CFG \
 106                                         | CSCONFIG_ROW_BIT_13 \
 107                                         | CSCONFIG_COL_BIT_10)
 108                                         /* 0x80840102 */
 109 #define CONFIG_SYS_DDR_TIMING_0         ((0 << TIMING_CFG0_RWT_SHIFT) \
 110                                         | (0 << TIMING_CFG0_WRT_SHIFT) \
 111                                         | (0 << TIMING_CFG0_RRT_SHIFT) \
 112                                         | (0 << TIMING_CFG0_WWT_SHIFT) \
 113                                         | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
 114                                         | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
 115                                         | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
 116                                         | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
 117                                         /* 0x00220802 */
 118 #define CONFIG_SYS_DDR_TIMING_1         ((3 << TIMING_CFG1_PRETOACT_SHIFT) \
 119                                         | (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \
 120                                         | (3 << TIMING_CFG1_ACTTORW_SHIFT) \
 121                                         | (5 << TIMING_CFG1_CASLAT_SHIFT) \
 122                                         | (13 << TIMING_CFG1_REFREC_SHIFT) \
 123                                         | (3 << TIMING_CFG1_WRREC_SHIFT) \
 124                                         | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
 125                                         | (2 << TIMING_CFG1_WRTORD_SHIFT))
 126                                         /* 0x3935D322 */
 127 #define CONFIG_SYS_DDR_TIMING_2         ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \
 128                                 | (31 << TIMING_CFG2_CPO_SHIFT) \
 129                                 | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
 130                                 | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
 131                                 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
 132                                 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
 133                                 | (10 << TIMING_CFG2_FOUR_ACT_SHIFT))
 134                                 /* 0x0F9048CA */
 135 #define CONFIG_SYS_DDR_TIMING_3         0x00000000
 136 #define CONFIG_SYS_DDR_CLK_CNTL         DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
 137                                         /* 0x02000000 */
 138 #define CONFIG_SYS_DDR_MODE             ((0x4440 << SDRAM_MODE_ESD_SHIFT) \
 139                                         | (0x0232 << SDRAM_MODE_SD_SHIFT))
 140                                         /* 0x44400232 */
 141 #define CONFIG_SYS_DDR_MODE2            0x8000c000
 142 #define CONFIG_SYS_DDR_INTERVAL         ((800 << SDRAM_INTERVAL_REFINT_SHIFT) \
 143                                         | (100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
 144                                         /* 0x03200064 */
 145 #define CONFIG_SYS_DDR_CS0_BNDS         0x00000007
 146 #define CONFIG_SYS_DDR_SDRAM_CFG        (SDRAM_CFG_SREN \
 147                                         | SDRAM_CFG_SDRAM_TYPE_DDR2 \
 148                                         | SDRAM_CFG_32_BE)
 149                                         /* 0x43080000 */
 150 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00401000
 151 #endif
 152
 153 /*
 154  * Memory test
 155  */
 156 #undef CONFIG_SYS_DRAM_TEST             /* memory test, takes time */
 157 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest region */
 158 #define CONFIG_SYS_MEMTEST_END          0x00100000
 159
 160 /*
 161  * The reserved memory
 162  */
 163 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 164
 165 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 166 #define CONFIG_SYS_RAMBOOT
 167 #else
 168 #undef  CONFIG_SYS_RAMBOOT
 169 #endif
 170
 171 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 172 #define CONFIG_SYS_MONITOR_LEN  (384 * 1024)    /* Reserve 384 kB for Mon */
 173 #define CONFIG_SYS_MALLOC_LEN   (256 * 1024)    /* Reserved for malloc */
 174
 175 /*
 176  * Initial RAM Base Address Setup
 177  */
 178 #define CONFIG_SYS_INIT_RAM_LOCK        1
 179 #define CONFIG_SYS_INIT_RAM_ADDR        0xE6000000      /* Initial RAM addr */
 180 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000  /* Size of used area in RAM */
 181 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 182                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 183
 184 /*
 185  * Local Bus Configuration & Clock Setup
 186  */
 187 #define CONFIG_SYS_LCRR_DBYP            LCRR_DBYP
 188 #define CONFIG_SYS_LCRR_CLKDIV          LCRR_CLKDIV_2
 189 #define CONFIG_SYS_LBC_LBCR             0x00000000
 190
 191 /*
 192  * FLASH on the Local Bus
 193  */
 194 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 195 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
 196 #define CONFIG_SYS_FLASH_BASE   0xFE000000      /* FLASH base address */
 197 #define CONFIG_SYS_FLASH_SIZE   16      /* FLASH size is 16M */
 198 #define CONFIG_SYS_FLASH_PROTECTION     1       /* Use h/w Flash protection. */
 199
 200                                         /* Window base at flash base */
 201 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 202 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_32MB)
 203
 204 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE \
 205                                 | BR_PS_16      /* 16 bit port */ \
 206                                 | BR_MS_GPCM    /* MSEL = GPCM */ \
 207                                 | BR_V)         /* valid */
 208 #define CONFIG_SYS_OR0_PRELIM   (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
 209                                 | OR_GPCM_XAM \
 210                                 | OR_GPCM_CSNT \
 211                                 | OR_GPCM_ACS_DIV2 \
 212                                 | OR_GPCM_XACS \
 213                                 | OR_GPCM_SCY_15 \
 214                                 | OR_GPCM_TRLX_SET \
 215                                 | OR_GPCM_EHTR_SET \
 216                                 | OR_GPCM_EAD)
 217                                 /* 0xfe006ff7 */
 218
 219 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 220 #define CONFIG_SYS_MAX_FLASH_SECT       128     /* sectors per device */
 221
 222 #undef CONFIG_SYS_FLASH_CHECKSUM
 223
 224 /*
 225  * BCSR on the Local Bus
 226  */
 227 #define CONFIG_SYS_BCSR                 0xF8000000
 228                                         /* Access window base at BCSR base */
 229 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_BCSR
 230 #define CONFIG_SYS_LBLAWAR1_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
 231
 232 #define CONFIG_SYS_BR1_PRELIM           (CONFIG_SYS_BCSR \
 233                                         | BR_PS_8 \
 234                                         | BR_MS_GPCM \
 235                                         | BR_V)
 236 #define CONFIG_SYS_OR1_PRELIM           (OR_AM_32KB \
 237                                         | OR_GPCM_XAM \
 238                                         | OR_GPCM_CSNT \
 239                                         | OR_GPCM_XACS \
 240                                         | OR_GPCM_SCY_15 \
 241                                         | OR_GPCM_TRLX_SET \
 242                                         | OR_GPCM_EHTR_SET \
 243                                         | OR_GPCM_EAD)
 244                                         /* 0xFFFFE9F7 */
 245
 246 /*
 247  * Windows to access PIB via local bus
 248  */
 249                                         /* PIB window base 0xF8008000 */
 250 #define CONFIG_SYS_PIB_BASE             0xF8008000
 251 #define CONFIG_SYS_PIB_WINDOW_SIZE      (32 * 1024)
 252 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_PIB_BASE
 253 #define CONFIG_SYS_LBLAWAR3_PRELIM      (LBLAWAR_EN | LBLAWAR_64KB)
 254
 255 /*
 256  * CS2 on Local Bus, to PIB
 257  */
 258 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_PIB_BASE \
 259                                 | BR_PS_8 \
 260                                 | BR_MS_GPCM \
 261                                 | BR_V)
 262                                 /* 0xF8008801 */
 263 #define CONFIG_SYS_OR2_PRELIM   (P2SZ_TO_AM(CONFIG_SYS_PIB_WINDOW_SIZE) \
 264                                 | OR_GPCM_XAM \
 265                                 | OR_GPCM_CSNT \
 266                                 | OR_GPCM_XACS \
 267                                 | OR_GPCM_SCY_15 \
 268                                 | OR_GPCM_TRLX_SET \
 269                                 | OR_GPCM_EHTR_SET \
 270                                 | OR_GPCM_EAD)
 271                                 /* 0xffffe9f7 */
 272
 273 /*
 274  * CS3 on Local Bus, to PIB
 275  */
 276 #define CONFIG_SYS_BR3_PRELIM   ((CONFIG_SYS_PIB_BASE + \
 277                                         CONFIG_SYS_PIB_WINDOW_SIZE) \
 278                                 | BR_PS_8 \
 279                                 | BR_MS_GPCM \
 280                                 | BR_V)
 281                                 /* 0xF8010801 */
 282 #define CONFIG_SYS_OR3_PRELIM   (P2SZ_TO_AM(CONFIG_SYS_PIB_WINDOW_SIZE) \
 283                                 | OR_GPCM_XAM \
 284                                 | OR_GPCM_CSNT \
 285                                 | OR_GPCM_XACS \
 286                                 | OR_GPCM_SCY_15 \
 287                                 | OR_GPCM_TRLX_SET \
 288                                 | OR_GPCM_EHTR_SET \
 289                                 | OR_GPCM_EAD)
 290                                 /* 0xffffe9f7 */
 291
 292 /*
 293  * Serial Port
 294  */
 295 #define CONFIG_CONS_INDEX       1
 296 #define CONFIG_SYS_NS16550
 297 #define CONFIG_SYS_NS16550_SERIAL
 298 #define CONFIG_SYS_NS16550_REG_SIZE     1
 299 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 300
 301 #define CONFIG_SYS_BAUDRATE_TABLE  \
 302                 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 303
 304 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 305 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 306
 307 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 308 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support   */
 309 /* Use the HUSH parser */
 310 #define CONFIG_SYS_HUSH_PARSER
 311
 312 /* pass open firmware flat tree */
 313 #define CONFIG_OF_LIBFDT        1
 314 #define CONFIG_OF_BOARD_SETUP   1
 315 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 316
 317 /* I2C */
 318 #define CONFIG_SYS_I2C
 319 #define CONFIG_SYS_I2C_FSL
 320 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 321 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 322 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 323 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x51} }
 324
 325 /*
 326  * Config on-board RTC
 327  */
 328 #define CONFIG_RTC_DS1374               /* use ds1374 rtc via i2c */
 329 #define CONFIG_SYS_I2C_RTC_ADDR 0x68    /* at address 0x68 */
 330
 331 /*
 332  * General PCI
 333  * Addresses are mapped 1-1.
 334  */
 335 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 336 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 337 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 338 #define CONFIG_SYS_PCI1_MMIO_BASE       0x90000000
 339 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 340 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 341 #define CONFIG_SYS_PCI1_IO_BASE         0x00000000
 342 #define CONFIG_SYS_PCI1_IO_PHYS         0xE0300000
 343 #define CONFIG_SYS_PCI1_IO_SIZE         0x100000        /* 1M */
 344
 345 #define CONFIG_SYS_PCI_SLV_MEM_LOCAL    CONFIG_SYS_SDRAM_BASE
 346 #define CONFIG_SYS_PCI_SLV_MEM_BUS      0x00000000
 347 #define CONFIG_SYS_PCI_SLV_MEM_SIZE     0x80000000
 348
 349
 350 #ifdef CONFIG_PCI
 351 #define CONFIG_PCI_INDIRECT_BRIDGE
 352
 353 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 354 #define CONFIG_83XX_PCI_STREAMING
 355
 356 #undef CONFIG_EEPRO100
 357 #undef CONFIG_PCI_SCAN_SHOW     /* show pci devices on startup */
 358 #define CONFIG_SYS_PCI_SUBSYS_VENDORID  0x1957  /* Freescale */
 359
 360 #endif  /* CONFIG_PCI */
 361
 362 /*
 363  * QE UEC ethernet configuration
 364  */
 365 #define CONFIG_UEC_ETH
 366 #define CONFIG_ETHPRIME         "UEC0"
 367
 368 #define CONFIG_UEC_ETH1         /* ETH3 */
 369
 370 #ifdef CONFIG_UEC_ETH1
 371 #define CONFIG_SYS_UEC1_UCC_NUM 2       /* UCC3 */
 372 #define CONFIG_SYS_UEC1_RX_CLK          QE_CLK9
 373 #define CONFIG_SYS_UEC1_TX_CLK          QE_CLK10
 374 #define CONFIG_SYS_UEC1_ETH_TYPE        FAST_ETH
 375 #define CONFIG_SYS_UEC1_PHY_ADDR        3
 376 #define CONFIG_SYS_UEC1_INTERFACE_TYPE  PHY_INTERFACE_MODE_MII
 377 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 378 #endif
 379
 380 #define CONFIG_UEC_ETH2         /* ETH4 */
 381
 382 #ifdef CONFIG_UEC_ETH2
 383 #define CONFIG_SYS_UEC2_UCC_NUM 3       /* UCC4 */
 384 #define CONFIG_SYS_UEC2_RX_CLK          QE_CLK7
 385 #define CONFIG_SYS_UEC2_TX_CLK          QE_CLK8
 386 #define CONFIG_SYS_UEC2_ETH_TYPE        FAST_ETH
 387 #define CONFIG_SYS_UEC2_PHY_ADDR        4
 388 #define CONFIG_SYS_UEC2_INTERFACE_TYPE  PHY_INTERFACE_MODE_MII
 389 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
 390 #endif
 391
 392 /*
 393  * Environment
 394  */
 395 #ifndef CONFIG_SYS_RAMBOOT
 396         #define CONFIG_ENV_IS_IN_FLASH  1
 397         #define CONFIG_ENV_ADDR         \
 398                         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 399         #define CONFIG_ENV_SECT_SIZE    0x20000
 400         #define CONFIG_ENV_SIZE         0x2000
 401 #else
 402         #define CONFIG_SYS_NO_FLASH     1       /* Flash is not usable now */
 403         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 404         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 405         #define CONFIG_ENV_SIZE         0x2000
 406 #endif
 407
 408 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 409 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 410
 411 /*
 412  * BOOTP options
 413  */
 414 #define CONFIG_BOOTP_BOOTFILESIZE
 415 #define CONFIG_BOOTP_BOOTPATH
 416 #define CONFIG_BOOTP_GATEWAY
 417 #define CONFIG_BOOTP_HOSTNAME
 418
 419
 420 /*
 421  * Command line configuration.
 422  */
 423 #define CONFIG_CMD_PING
 424 #define CONFIG_CMD_I2C
 425 #define CONFIG_CMD_ASKENV
 426
 427 #if defined(CONFIG_PCI)
 428     #define CONFIG_CMD_PCI
 429 #endif
 430
 431 #undef CONFIG_WATCHDOG          /* watchdog disabled */
 432
 433 /*
 434  * Miscellaneous configurable options
 435  */
 436 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 437 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 438
 439 #if defined(CONFIG_CMD_KGDB)
 440         #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 441 #else
 442         #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 443 #endif
 444
 445                                 /* Print Buffer Size */
 446 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 447 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 448                                 /* Boot Argument Buffer Size */
 449 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 450
 451 /*
 452  * For booting Linux, the board info and command line data
 453  * have to be in the first 256 MB of memory, since this is
 454  * the maximum mapped by the Linux kernel during initialization.
 455  */
 456                                         /* Initial Memory map for Linux */
 457 #define CONFIG_SYS_BOOTMAPSZ            (256 << 20)
 458
 459 /*
 460  * Core HID Setup
 461  */
 462 #define CONFIG_SYS_HID0_INIT    0x000000000
 463 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK | \
 464                                  HID0_ENABLE_INSTRUCTION_CACHE)
 465 #define CONFIG_SYS_HID2         HID2_HBE
 466
 467 /*
 468  * MMU Setup
 469  */
 470
 471 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 472
 473 /* DDR: cache cacheable */
 474 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE \
 475                                 | BATL_PP_RW \
 476                                 | BATL_MEMCOHERENCE)
 477 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE \
 478                                 | BATU_BL_256M \
 479                                 | BATU_VS \
 480                                 | BATU_VP)
 481 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 482 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 483
 484 /* IMMRBAR & PCI IO: cache-inhibit and guarded */
 485 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_IMMR \
 486                                 | BATL_PP_RW \
 487                                 | BATL_CACHEINHIBIT \
 488                                 | BATL_GUARDEDSTORAGE)
 489 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_IMMR \
 490                                 | BATU_BL_4M \
 491                                 | BATU_VS \
 492                                 | BATU_VP)
 493 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 494 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 495
 496 /* BCSR: cache-inhibit and guarded */
 497 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_BCSR \
 498                                 | BATL_PP_RW \
 499                                 | BATL_CACHEINHIBIT \
 500                                 | BATL_GUARDEDSTORAGE)
 501 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_BCSR \
 502                                 | BATU_BL_128K \
 503                                 | BATU_VS \
 504                                 | BATU_VP)
 505 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 506 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 507
 508 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
 509 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_FLASH_BASE \
 510                                 | BATL_PP_RW \
 511                                 | BATL_MEMCOHERENCE)
 512 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_FLASH_BASE \
 513                                 | BATU_BL_32M \
 514                                 | BATU_VS \
 515                                 | BATU_VP)
 516 #define CONFIG_SYS_DBAT3L       (CONFIG_SYS_FLASH_BASE \
 517                                 | BATL_PP_RW \
 518                                 | BATL_CACHEINHIBIT \
 519                                 | BATL_GUARDEDSTORAGE)
 520 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 521
 522 #define CONFIG_SYS_IBAT4L       (0)
 523 #define CONFIG_SYS_IBAT4U       (0)
 524 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 525 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 526
 527 /* Stack in dcache: cacheable, no memory coherence */
 528 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW)
 529 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_INIT_RAM_ADDR \
 530                                 | BATU_BL_128K \
 531                                 | BATU_VS \
 532                                 | BATU_VP)
 533 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 534 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 535
 536 #ifdef CONFIG_PCI
 537 /* PCI MEM space: cacheable */
 538 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_PCI1_MEM_PHYS \
 539                                 | BATL_PP_RW \
 540                                 | BATL_MEMCOHERENCE)
 541 #define CONFIG_SYS_IBAT6U       (CONFIG_SYS_PCI1_MEM_PHYS \
 542                                 | BATU_BL_256M \
 543                                 | BATU_VS \
 544                                 | BATU_VP)
 545 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 546 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 547 /* PCI MMIO space: cache-inhibit and guarded */
 548 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_PCI1_MMIO_PHYS \
 549                                 | BATL_PP_RW \
 550                                 | BATL_CACHEINHIBIT \
 551                                 | BATL_GUARDEDSTORAGE)
 552 #define CONFIG_SYS_IBAT7U       (CONFIG_SYS_PCI1_MMIO_PHYS \
 553                                 | BATU_BL_256M \
 554                                 | BATU_VS \
 555                                 | BATU_VP)
 556 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 557 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 558 #else
 559 #define CONFIG_SYS_IBAT6L       (0)
 560 #define CONFIG_SYS_IBAT6U       (0)
 561 #define CONFIG_SYS_IBAT7L       (0)
 562 #define CONFIG_SYS_IBAT7U       (0)
 563 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 564 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 565 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 566 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 567 #endif
 568
 569 #if defined(CONFIG_CMD_KGDB)
 570 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 571 #endif
 572
 573 /*
 574  * Environment Configuration
 575  */ #define CONFIG_ENV_OVERWRITE
 576
 577 #if defined(CONFIG_UEC_ETH)
 578 #define CONFIG_HAS_ETH0
 579 #define CONFIG_HAS_ETH1
 580 #endif
 581
 582 #define CONFIG_BAUDRATE 115200
 583
 584 #define CONFIG_LOADADDR 800000  /* default location for tftp and bootm */
 585
 586 #define CONFIG_BOOTDELAY 6      /* -1 disables auto-boot */
 587 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 588
 589 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 590         "netdev=eth0\0"                                                 \
 591         "consoledev=ttyS0\0"                                            \
 592         "ramdiskaddr=1000000\0"                                         \
 593         "ramdiskfile=ramfs.83xx\0"                                      \
 594         "fdtaddr=780000\0"                                              \
 595         "fdtfile=mpc832x_mds.dtb\0"                                     \
 596         ""
 597
 598 #define CONFIG_NFSBOOTCOMMAND                                           \
 599         "setenv bootargs root=/dev/nfs rw "                             \
 600                 "nfsroot=$serverip:$rootpath "                          \
 601                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"   \
 602                                                         "$netdev:off "  \
 603                 "console=$consoledev,$baudrate $othbootargs;"           \
 604         "tftp $loadaddr $bootfile;"                                     \
 605         "tftp $fdtaddr $fdtfile;"                                       \
 606         "bootm $loadaddr - $fdtaddr"
 607
 608 #define CONFIG_RAMBOOTCOMMAND                                           \
 609         "setenv bootargs root=/dev/ram rw "                             \
 610                 "console=$consoledev,$baudrate $othbootargs;"           \
 611         "tftp $ramdiskaddr $ramdiskfile;"                               \
 612         "tftp $loadaddr $bootfile;"                                     \
 613         "tftp $fdtaddr $fdtfile;"                                       \
 614         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 615
 616
 617 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
 618
 619 #endif  /* __CONFIG_H */