include/configs/MPC8536DS.h

   1 /*
   2  * Copyright 2007-2009,2010-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * mpc8536ds board configuration file
   9  *
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #define CONFIG_DISPLAY_BOARDINFO
  15 #include "../board/freescale/common/ics307_clk.h"
  16
  17 #ifdef CONFIG_36BIT
  18 #define CONFIG_PHYS_64BIT       1
  19 #endif
  20
  21 #ifdef CONFIG_SDCARD
  22 #define CONFIG_RAMBOOT_SDCARD           1
  23 #define CONFIG_SYS_TEXT_BASE    0xf8f40000
  24 #define CONFIG_RESET_VECTOR_ADDRESS     0xf8fffffc
  25 #endif
  26
  27 #ifdef CONFIG_SPIFLASH
  28 #define CONFIG_RAMBOOT_SPIFLASH         1
  29 #define CONFIG_SYS_TEXT_BASE    0xf8f40000
  30 #define CONFIG_RESET_VECTOR_ADDRESS     0xf8fffffc
  31 #endif
  32
  33 #ifndef CONFIG_SYS_TEXT_BASE
  34 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  35 #endif
  36
  37 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  38 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  39 #endif
  40
  41 #ifndef CONFIG_SYS_MONITOR_BASE
  42 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  43 #endif
  44
  45 /* High Level Configuration Options */
  46 #define CONFIG_BOOKE            1       /* BOOKE */
  47 #define CONFIG_E500             1       /* BOOKE e500 family */
  48 #define CONFIG_MPC8536          1
  49 #define CONFIG_MPC8536DS        1
  50
  51 #define CONFIG_FSL_ELBC         1       /* Has Enhanced localbus controller */
  52 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  53 #define CONFIG_PCI1             1       /* Enable PCI controller 1 */
  54 #define CONFIG_PCIE1            1       /* PCIE controler 1 (slot 1) */
  55 #define CONFIG_PCIE2            1       /* PCIE controler 2 (slot 2) */
  56 #define CONFIG_PCIE3            1       /* PCIE controler 3 (ULI bridge) */
  57 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  58 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  59 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  60 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  61
  62 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  63
  64 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  65 #define CONFIG_ENV_OVERWRITE
  66
  67 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
  68 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
  69 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
  70
  71 /*
  72  * These can be toggled for performance analysis, otherwise use default.
  73  */
  74 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  75 #define CONFIG_BTB                      /* toggle branch predition */
  76
  77 #define CONFIG_BOARD_EARLY_INIT_F       1       /* Call board_pre_init */
  78
  79 #define CONFIG_ENABLE_36BIT_PHYS        1
  80
  81 #ifdef CONFIG_PHYS_64BIT
  82 #define CONFIG_ADDR_MAP                 1
  83 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
  84 #endif
  85
  86 #define CONFIG_SYS_MEMTEST_START 0x00010000     /* skip exception vectors */
  87 #define CONFIG_SYS_MEMTEST_END   0x1f000000     /* skip u-boot at top of RAM */
  88 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  89
  90 /*
  91  * Config the L2 Cache as L2 SRAM
  92  */
  93 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
  94 #ifdef CONFIG_PHYS_64BIT
  95 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    0xff8f80000ull
  96 #else
  97 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
  98 #endif
  99 #define CONFIG_SYS_L2_SIZE              (512 << 10)
 100 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 101
 102 #define CONFIG_SYS_CCSRBAR              0xffe00000
 103 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 104
 105 #if defined(CONFIG_NAND_SPL)
 106 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 107 #endif
 108
 109 /* DDR Setup */
 110 #define CONFIG_VERY_BIG_RAM
 111 #define CONFIG_SYS_FSL_DDR2
 112 #undef CONFIG_FSL_DDR_INTERACTIVE
 113 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
 114 #define CONFIG_DDR_SPD
 115
 116 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
 117 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
 118
 119 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 120 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 121
 122 #define CONFIG_NUM_DDR_CONTROLLERS      1
 123 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 124 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 125
 126 /* I2C addresses of SPD EEPROMs */
 127 #define SPD_EEPROM_ADDRESS      0x51    /* CTLR 0 DIMM 0 */
 128 #define CONFIG_SYS_SPD_BUS_NUM          1
 129
 130 /* These are used when DDR doesn't use SPD. */
 131 #define CONFIG_SYS_SDRAM_SIZE           256     /* DDR is 256MB */
 132 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F
 133 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80010102 /* Enable, no interleaving */
 134 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 135 #define CONFIG_SYS_DDR_TIMING_0 0x00260802
 136 #define CONFIG_SYS_DDR_TIMING_1 0x3935d322
 137 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8
 138 #define CONFIG_SYS_DDR_MODE_1           0x00480432
 139 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 140 #define CONFIG_SYS_DDR_INTERVAL 0x06180100
 141 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 142 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000
 143 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000
 144 #define CONFIG_SYS_DDR_OCD_STATUS       0x00000000
 145 #define CONFIG_SYS_DDR_CONTROL  0xC3008000      /* Type = DDR2 */
 146 #define CONFIG_SYS_DDR_CONTROL2 0x04400010
 147
 148 #define CONFIG_SYS_DDR_ERR_INT_EN       0x0000000d
 149 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 150 #define CONFIG_SYS_DDR_SBE              0x00010000
 151
 152 /* Make sure required options are set */
 153 #ifndef CONFIG_SPD_EEPROM
 154 #error ("CONFIG_SPD_EEPROM is required")
 155 #endif
 156
 157 #undef CONFIG_CLOCKS_IN_MHZ
 158
 159
 160 /*
 161  * Memory map -- xxx -this is wrong, needs updating
 162  *
 163  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 164  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1G non-cacheable
 165  * 0xc000_0000  0xdfff_ffff     PCI                     512M non-cacheable
 166  * 0xe100_0000  0xe3ff_ffff     PCI IO range            4M non-cacheable
 167  *
 168  * Localbus cacheable (TBD)
 169  * 0xXXXX_XXXX  0xXXXX_XXXX     SRAM                    YZ M Cacheable
 170  *
 171  * Localbus non-cacheable
 172  * 0xe000_0000  0xe7ff_ffff     Promjet/free            128M non-cacheable
 173  * 0xe800_0000  0xefff_ffff     FLASH                   128M non-cacheable
 174  * 0xffa0_0000  0xffaf_ffff     NAND                    1M non-cacheable
 175  * 0xffdf_0000  0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
 176  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 177  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 178  */
 179
 180 /*
 181  * Local Bus Definitions
 182  */
 183 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* start of FLASH 128M */
 184 #ifdef CONFIG_PHYS_64BIT
 185 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 186 #else
 187 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 188 #endif
 189
 190 #define CONFIG_FLASH_BR_PRELIM \
 191         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
 192 #define CONFIG_FLASH_OR_PRELIM  0xf8000ff7
 193
 194 #define CONFIG_SYS_BR1_PRELIM \
 195                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 196                  | BR_PS_16 | BR_V)
 197 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 198
 199 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, \
 200                                       CONFIG_SYS_FLASH_BASE_PHYS }
 201 #define CONFIG_SYS_FLASH_QUIET_TEST
 202 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 203
 204 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 205 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 206 #undef  CONFIG_SYS_FLASH_CHECKSUM
 207 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 208 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 209
 210 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
 211 #define CONFIG_SYS_RAMBOOT
 212 #define CONFIG_SYS_EXTRA_ENV_RELOC
 213 #else
 214 #undef CONFIG_SYS_RAMBOOT
 215 #endif
 216
 217 #define CONFIG_FLASH_CFI_DRIVER
 218 #define CONFIG_SYS_FLASH_CFI
 219 #define CONFIG_SYS_FLASH_EMPTY_INFO
 220 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 221
 222 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 223
 224 #define CONFIG_HWCONFIG                 /* enable hwconfig */
 225 #define CONFIG_FSL_PIXIS        1       /* use common PIXIS code */
 226 #define PIXIS_BASE      0xffdf0000      /* PIXIS registers */
 227 #ifdef CONFIG_PHYS_64BIT
 228 #define PIXIS_BASE_PHYS 0xfffdf0000ull
 229 #else
 230 #define PIXIS_BASE_PHYS PIXIS_BASE
 231 #endif
 232
 233 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 234 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 235
 236 #define PIXIS_ID                0x0     /* Board ID at offset 0 */
 237 #define PIXIS_VER               0x1     /* Board version at offset 1 */
 238 #define PIXIS_PVER              0x2     /* PIXIS FPGA version at offset 2 */
 239 #define PIXIS_CSR               0x3     /* PIXIS General control/status register */
 240 #define PIXIS_RST               0x4     /* PIXIS Reset Control register */
 241 #define PIXIS_PWR               0x5     /* PIXIS Power status register */
 242 #define PIXIS_AUX               0x6     /* Auxiliary 1 register */
 243 #define PIXIS_SPD               0x7     /* Register for SYSCLK speed */
 244 #define PIXIS_AUX2              0x8     /* Auxiliary 2 register */
 245 #define PIXIS_VCTL              0x10    /* VELA Control Register */
 246 #define PIXIS_VSTAT             0x11    /* VELA Status Register */
 247 #define PIXIS_VCFGEN0           0x12    /* VELA Config Enable 0 */
 248 #define PIXIS_VCFGEN1           0x13    /* VELA Config Enable 1 */
 249 #define PIXIS_VCORE0            0x14    /* VELA VCORE0 Register */
 250 #define PIXIS_VBOOT             0x16    /* VELA VBOOT Register */
 251 #define PIXIS_VBOOT_LBMAP       0xe0    /* VBOOT - CFG_LBMAP */
 252 #define PIXIS_VBOOT_LBMAP_NOR0  0x00    /* cfg_lbmap - boot from NOR 0 */
 253 #define PIXIS_VBOOT_LBMAP_NOR1  0x01    /* cfg_lbmap - boot from NOR 1 */
 254 #define PIXIS_VBOOT_LBMAP_NOR2  0x02    /* cfg_lbmap - boot from NOR 2 */
 255 #define PIXIS_VBOOT_LBMAP_NOR3  0x03    /* cfg_lbmap - boot from NOR 3 */
 256 #define PIXIS_VBOOT_LBMAP_PJET  0x04    /* cfg_lbmap - boot from projet */
 257 #define PIXIS_VBOOT_LBMAP_NAND  0x05    /* cfg_lbmap - boot from NAND */
 258 #define PIXIS_VSPEED0           0x17    /* VELA VSpeed 0 */
 259 #define PIXIS_VSPEED1           0x18    /* VELA VSpeed 1 */
 260 #define PIXIS_VSPEED2           0x19    /* VELA VSpeed 2 */
 261 #define PIXIS_VSYSCLK0          0x1A    /* VELA SYSCLK0 Register */
 262 #define PIXIS_VSYSCLK1          0x1B    /* VELA SYSCLK1 Register */
 263 #define PIXIS_VSYSCLK2          0x1C    /* VELA SYSCLK2 Register */
 264 #define PIXIS_VDDRCLK0          0x1D    /* VELA DDRCLK0 Register */
 265 #define PIXIS_VDDRCLK1          0x1E    /* VELA DDRCLK1 Register */
 266 #define PIXIS_VDDRCLK2          0x1F    /* VELA DDRCLK2 Register */
 267 #define PIXIS_VWATCH            0x24    /* Watchdog Register */
 268 #define PIXIS_LED               0x25    /* LED Register */
 269
 270 #define PIXIS_SPD_SYSCLK        0x7     /* SYSCLK option */
 271
 272 /* old pixis referenced names */
 273 #define PIXIS_VCLKH             0x19    /* VELA VCLKH register */
 274 #define PIXIS_VCLKL             0x1A    /* VELA VCLKL register */
 275 #define CONFIG_SYS_PIXIS_VBOOT_MASK     0x4e
 276
 277 #define CONFIG_SYS_INIT_RAM_LOCK        1
 278 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 279 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000      /* Size of used area in RAM */
 280
 281 #define CONFIG_SYS_GBL_DATA_OFFSET \
 282                 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 283 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 284
 285 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024) /* Reserve 256 kB for Mon */
 286 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)   /* Reserved for malloc */
 287
 288 #ifndef CONFIG_NAND_SPL
 289 #define CONFIG_SYS_NAND_BASE            0xffa00000
 290 #ifdef CONFIG_PHYS_64BIT
 291 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 292 #else
 293 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 294 #endif
 295 #else
 296 #define CONFIG_SYS_NAND_BASE            0xfff00000
 297 #ifdef CONFIG_PHYS_64BIT
 298 #define CONFIG_SYS_NAND_BASE_PHYS       0xffff00000ull
 299 #else
 300 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 301 #endif
 302 #endif
 303 #define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE,\
 304                                 CONFIG_SYS_NAND_BASE + 0x40000, \
 305                                 CONFIG_SYS_NAND_BASE + 0x80000, \
 306                                 CONFIG_SYS_NAND_BASE + 0xC0000}
 307 #define CONFIG_SYS_MAX_NAND_DEVICE      4
 308 #define CONFIG_CMD_NAND         1
 309 #define CONFIG_NAND_FSL_ELBC    1
 310 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 311
 312 /* NAND boot: 4K NAND loader config */
 313 #define CONFIG_SYS_NAND_SPL_SIZE        0x1000
 314 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
 315 #define CONFIG_SYS_NAND_U_BOOT_DST      (CONFIG_SYS_INIT_L2_ADDR)
 316 #define CONFIG_SYS_NAND_U_BOOT_START \
 317                 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
 318 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (0)
 319 #define CONFIG_SYS_NAND_U_BOOT_RELOC    (CONFIG_SYS_INIT_L2_END - 0x2000)
 320 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 321
 322 /* NAND flash config */
 323 #define CONFIG_SYS_NAND_BR_PRELIM \
 324                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 325                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 326                 | BR_PS_8               /* Port Size = 8 bit */ \
 327                 | BR_MS_FCM             /* MSEL = FCM */ \
 328                 | BR_V)                 /* valid */
 329 #define CONFIG_SYS_NAND_OR_PRELIM       (0xFFFC0000     /* length 256K */ \
 330                 | OR_FCM_PGS            /* Large Page*/ \
 331                 | OR_FCM_CSCT \
 332                 | OR_FCM_CST \
 333                 | OR_FCM_CHT \
 334                 | OR_FCM_SCY_1 \
 335                 | OR_FCM_TRLX \
 336                 | OR_FCM_EHTR)
 337
 338 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM   /* NOR Base Address */
 339 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM   /* NOR Options */
 340 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 341 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 342
 343 #define CONFIG_SYS_BR4_PRELIM \
 344                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
 345                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 346                 | BR_PS_8               /* Port Size = 8 bit */ \
 347                 | BR_MS_FCM             /* MSEL = FCM */ \
 348                 | BR_V)                 /* valid */
 349 #define CONFIG_SYS_OR4_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 350 #define CONFIG_SYS_BR5_PRELIM \
 351                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \
 352                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 353                 | BR_PS_8               /* Port Size = 8 bit */ \
 354                 | BR_MS_FCM             /* MSEL = FCM */ \
 355                 | BR_V)                 /* valid */
 356 #define CONFIG_SYS_OR5_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 357
 358 #define CONFIG_SYS_BR6_PRELIM \
 359                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \
 360                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 361                 | BR_PS_8               /* Port Size = 8 bit */ \
 362                 | BR_MS_FCM             /* MSEL = FCM */ \
 363                 | BR_V)                 /* valid */
 364 #define CONFIG_SYS_OR6_PRELIM   CONFIG_SYS_NAND_OR_PRELIM       /* NAND Options */
 365
 366 /* Serial Port - controlled on board with jumper J8
 367  * open - index 2
 368  * shorted - index 1
 369  */
 370 #define CONFIG_CONS_INDEX       1
 371 #define CONFIG_SYS_NS16550
 372 #define CONFIG_SYS_NS16550_SERIAL
 373 #define CONFIG_SYS_NS16550_REG_SIZE     1
 374 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 375 #ifdef CONFIG_NAND_SPL
 376 #define CONFIG_NS16550_MIN_FUNCTIONS
 377 #endif
 378
 379 #define CONFIG_SYS_BAUDRATE_TABLE       \
 380         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 381
 382 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 383 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 384
 385 /* Use the HUSH parser */
 386 #define CONFIG_SYS_HUSH_PARSER
 387
 388 /*
 389  * Pass open firmware flat tree
 390  */
 391 #define CONFIG_OF_LIBFDT                1
 392 #define CONFIG_OF_BOARD_SETUP           1
 393 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 394
 395 /*
 396  * I2C
 397  */
 398 #define CONFIG_SYS_I2C
 399 #define CONFIG_SYS_I2C_FSL
 400 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 401 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 402 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 403 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 404 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 405 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 406 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 407
 408 /*
 409  * I2C2 EEPROM
 410  */
 411 #define CONFIG_ID_EEPROM
 412 #ifdef CONFIG_ID_EEPROM
 413 #define CONFIG_SYS_I2C_EEPROM_NXID
 414 #endif
 415 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 416 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 417 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 418
 419 /*
 420  * eSPI - Enhanced SPI
 421  */
 422 #define CONFIG_HARD_SPI
 423 #define CONFIG_FSL_ESPI
 424
 425 #if defined(CONFIG_SPI_FLASH)
 426 #define CONFIG_SPI_FLASH_SPANSION
 427 #define CONFIG_CMD_SF
 428 #define CONFIG_SF_DEFAULT_SPEED 10000000
 429 #define CONFIG_SF_DEFAULT_MODE  0
 430 #endif
 431
 432 /*
 433  * General PCI
 434  * Memory space is mapped 1-1, but I/O space must start from 0.
 435  */
 436
 437 #define CONFIG_SYS_PCI1_MEM_VIRT        0x80000000
 438 #ifdef CONFIG_PHYS_64BIT
 439 #define CONFIG_SYS_PCI1_MEM_BUS         0xf0000000
 440 #define CONFIG_SYS_PCI1_MEM_PHYS        0xc00000000ull
 441 #else
 442 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
 443 #define CONFIG_SYS_PCI1_MEM_PHYS        0x80000000
 444 #endif
 445 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 446 #define CONFIG_SYS_PCI1_IO_VIRT         0xffc00000
 447 #define CONFIG_SYS_PCI1_IO_BUS          0x00000000
 448 #ifdef CONFIG_PHYS_64BIT
 449 #define CONFIG_SYS_PCI1_IO_PHYS         0xfffc00000ull
 450 #else
 451 #define CONFIG_SYS_PCI1_IO_PHYS         0xffc00000
 452 #endif
 453 #define CONFIG_SYS_PCI1_IO_SIZE         0x00010000      /* 64k */
 454
 455 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 456 #define CONFIG_SYS_PCIE1_NAME           "Slot 1"
 457 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x90000000
 458 #ifdef CONFIG_PHYS_64BIT
 459 #define CONFIG_SYS_PCIE1_MEM_BUS        0xf8000000
 460 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc10000000ull
 461 #else
 462 #define CONFIG_SYS_PCIE1_MEM_BUS        0x90000000
 463 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x90000000
 464 #endif
 465 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x08000000      /* 128M */
 466 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc10000
 467 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 468 #ifdef CONFIG_PHYS_64BIT
 469 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc10000ull
 470 #else
 471 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc10000
 472 #endif
 473 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 474
 475 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 476 #define CONFIG_SYS_PCIE2_NAME           "Slot 2"
 477 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x98000000
 478 #ifdef CONFIG_PHYS_64BIT
 479 #define CONFIG_SYS_PCIE2_MEM_BUS        0xf8000000
 480 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc18000000ull
 481 #else
 482 #define CONFIG_SYS_PCIE2_MEM_BUS        0x98000000
 483 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x98000000
 484 #endif
 485 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x08000000      /* 128M */
 486 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc20000
 487 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 488 #ifdef CONFIG_PHYS_64BIT
 489 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc20000ull
 490 #else
 491 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc20000
 492 #endif
 493 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 494
 495 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
 496 #define CONFIG_SYS_PCIE3_NAME           "Slot 3"
 497 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 498 #ifdef CONFIG_PHYS_64BIT
 499 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 500 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 501 #else
 502 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 503 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 504 #endif
 505 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 506 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc30000
 507 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 508 #ifdef CONFIG_PHYS_64BIT
 509 #define CONFIG_SYS_PCIE3_IO_PHYS        0xfffc30000ull
 510 #else
 511 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc30000
 512 #endif
 513 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 514
 515 #if defined(CONFIG_PCI)
 516
 517 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 518
 519 /*PCIE video card used*/
 520 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE3_IO_VIRT
 521
 522 /*PCI video card used*/
 523 /*#define VIDEO_IO_OFFSET       CONFIG_SYS_PCI1_IO_VIRT*/
 524
 525 /* video */
 526 #define CONFIG_VIDEO
 527
 528 #if defined(CONFIG_VIDEO)
 529 #define CONFIG_BIOSEMU
 530 #define CONFIG_CFB_CONSOLE
 531 #define CONFIG_VIDEO_SW_CURSOR
 532 #define CONFIG_VGA_AS_SINGLE_DEVICE
 533 #define CONFIG_ATI_RADEON_FB
 534 #define CONFIG_VIDEO_LOGO
 535 /*#define CONFIG_CONSOLE_CURSOR*/
 536 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT
 537 #endif
 538
 539 #undef CONFIG_EEPRO100
 540 #undef CONFIG_TULIP
 541 #undef CONFIG_RTL8139
 542
 543 #ifndef CONFIG_PCI_PNP
 544         #define PCI_ENET0_IOADDR        CONFIG_SYS_PCI1_IO_BUS
 545         #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCI1_IO_BUS
 546         #define PCI_IDSEL_NUMBER        0x11    /* IDSEL = AD11 */
 547 #endif
 548
 549 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 550
 551 #endif  /* CONFIG_PCI */
 552
 553 /* SATA */
 554 #define CONFIG_LIBATA
 555 #define CONFIG_FSL_SATA
 556
 557 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 558 #define CONFIG_SATA1
 559 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 560 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 561 #define CONFIG_SATA2
 562 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 563 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 564
 565 #ifdef CONFIG_FSL_SATA
 566 #define CONFIG_LBA48
 567 #define CONFIG_CMD_SATA
 568 #define CONFIG_DOS_PARTITION
 569 #define CONFIG_CMD_EXT2
 570 #endif
 571
 572 #if defined(CONFIG_TSEC_ENET)
 573
 574 #define CONFIG_MII              1       /* MII PHY management */
 575 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 576 #define CONFIG_TSEC1    1
 577 #define CONFIG_TSEC1_NAME       "eTSEC1"
 578 #define CONFIG_TSEC3    1
 579 #define CONFIG_TSEC3_NAME       "eTSEC3"
 580
 581 #define CONFIG_FSL_SGMII_RISER  1
 582 #define SGMII_RISER_PHY_OFFSET  0x1c
 583
 584 #define TSEC1_PHY_ADDR          1       /* TSEC1 -> PHY1 */
 585 #define TSEC3_PHY_ADDR          0       /* TSEC3 -> PHY0 */
 586
 587 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 588 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 589
 590 #define TSEC1_PHYIDX            0
 591 #define TSEC3_PHYIDX            0
 592
 593 #define CONFIG_ETHPRIME         "eTSEC1"
 594
 595 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 596
 597 #endif  /* CONFIG_TSEC_ENET */
 598
 599 /*
 600  * Environment
 601  */
 602
 603 #if defined(CONFIG_SYS_RAMBOOT)
 604 #if defined(CONFIG_RAMBOOT_SPIFLASH)
 605 #define CONFIG_ENV_IS_IN_SPI_FLASH
 606 #define CONFIG_ENV_SPI_BUS      0
 607 #define CONFIG_ENV_SPI_CS       0
 608 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 609 #define CONFIG_ENV_SPI_MODE     0
 610 #define CONFIG_ENV_SIZE         0x2000  /* 8KB */
 611 #define CONFIG_ENV_OFFSET       0xF0000
 612 #define CONFIG_ENV_SECT_SIZE    0x10000
 613 #elif defined(CONFIG_RAMBOOT_SDCARD)
 614 #define CONFIG_ENV_IS_IN_MMC
 615 #define CONFIG_FSL_FIXED_MMC_LOCATION
 616 #define CONFIG_ENV_SIZE         0x2000
 617 #define CONFIG_SYS_MMC_ENV_DEV  0
 618 #else
 619         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 620         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 621         #define CONFIG_ENV_SIZE         0x2000
 622 #endif
 623 #else
 624         #define CONFIG_ENV_IS_IN_FLASH  1
 625         #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 626         #define CONFIG_ENV_SIZE         0x2000
 627         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 628 #endif
 629
 630 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 631 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 632
 633 /*
 634  * Command line configuration.
 635  */
 636 #define CONFIG_CMD_IRQ
 637 #define CONFIG_CMD_PING
 638 #define CONFIG_CMD_I2C
 639 #define CONFIG_CMD_MII
 640 #define CONFIG_CMD_IRQ
 641 #define CONFIG_CMD_REGINFO
 642
 643 #if defined(CONFIG_PCI)
 644 #define CONFIG_CMD_PCI
 645 #endif
 646
 647 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 648
 649 #define CONFIG_MMC     1
 650
 651 #ifdef CONFIG_MMC
 652 #define CONFIG_FSL_ESDHC
 653 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 654 #define CONFIG_CMD_MMC
 655 #define CONFIG_GENERIC_MMC
 656 #endif
 657
 658 /*
 659  * USB
 660  */
 661 #define CONFIG_HAS_FSL_MPH_USB
 662 #ifdef CONFIG_HAS_FSL_MPH_USB
 663 #define CONFIG_USB_EHCI
 664
 665 #ifdef CONFIG_USB_EHCI
 666 #define CONFIG_CMD_USB
 667 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 668 #define CONFIG_USB_EHCI_FSL
 669 #define CONFIG_USB_STORAGE
 670 #endif
 671 #endif
 672
 673 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 674 #define CONFIG_CMD_EXT2
 675 #define CONFIG_CMD_FAT
 676 #define CONFIG_DOS_PARTITION
 677 #endif
 678
 679 /*
 680  * Miscellaneous configurable options
 681  */
 682 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 683 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 684 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 685 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 686 #if defined(CONFIG_CMD_KGDB)
 687 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 688 #else
 689 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 690 #endif
 691 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
 692                 + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
 693 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 694 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 695
 696 /*
 697  * For booting Linux, the board info and command line data
 698  * have to be in the first 64 MB of memory, since this is
 699  * the maximum mapped by the Linux kernel during initialization.
 700  */
 701 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 702 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 703
 704 #if defined(CONFIG_CMD_KGDB)
 705 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 706 #endif
 707
 708 /*
 709  * Environment Configuration
 710  */
 711
 712 /* The mac addresses for all ethernet interface */
 713 #if defined(CONFIG_TSEC_ENET)
 714 #define CONFIG_HAS_ETH0
 715 #define CONFIG_HAS_ETH1
 716 #define CONFIG_HAS_ETH2
 717 #define CONFIG_HAS_ETH3
 718 #endif
 719
 720 #define CONFIG_IPADDR           192.168.1.254
 721
 722 #define CONFIG_HOSTNAME         unknown
 723 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 724 #define CONFIG_BOOTFILE         "uImage"
 725 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 726
 727 #define CONFIG_SERVERIP         192.168.1.1
 728 #define CONFIG_GATEWAYIP        192.168.1.1
 729 #define CONFIG_NETMASK          255.255.255.0
 730
 731 /* default location for tftp and bootm */
 732 #define CONFIG_LOADADDR         1000000
 733
 734 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 735 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 736
 737 #define CONFIG_BAUDRATE 115200
 738
 739 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 740 "netdev=eth0\0"                                         \
 741 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 742 "tftpflash=tftpboot $loadaddr $uboot; "                 \
 743         "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
 744                 " +$filesize; " \
 745         "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
 746                 " +$filesize; " \
 747         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
 748                 " $filesize; "  \
 749         "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
 750                 " +$filesize; " \
 751         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
 752                 " $filesize\0"  \
 753 "consoledev=ttyS0\0"                            \
 754 "ramdiskaddr=2000000\0"                 \
 755 "ramdiskfile=8536ds/ramdisk.uboot\0"            \
 756 "fdtaddr=c00000\0"                              \
 757 "fdtfile=8536ds/mpc8536ds.dtb\0"                \
 758 "bdev=sda3\0"                                   \
 759 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 760
 761 #define CONFIG_HDBOOT                           \
 762  "setenv bootargs root=/dev/$bdev rw "          \
 763  "console=$consoledev,$baudrate $othbootargs;"  \
 764  "tftp $loadaddr $bootfile;"                    \
 765  "tftp $fdtaddr $fdtfile;"                      \
 766  "bootm $loadaddr - $fdtaddr"
 767
 768 #define CONFIG_NFSBOOTCOMMAND           \
 769  "setenv bootargs root=/dev/nfs rw "    \
 770  "nfsroot=$serverip:$rootpath "         \
 771  "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 772  "console=$consoledev,$baudrate $othbootargs;"  \
 773  "tftp $loadaddr $bootfile;"            \
 774  "tftp $fdtaddr $fdtfile;"              \
 775  "bootm $loadaddr - $fdtaddr"
 776
 777 #define CONFIG_RAMBOOTCOMMAND           \
 778  "setenv bootargs root=/dev/ram rw "    \
 779  "console=$consoledev,$baudrate $othbootargs;"  \
 780  "tftp $ramdiskaddr $ramdiskfile;"      \
 781  "tftp $loadaddr $bootfile;"            \
 782  "tftp $fdtaddr $fdtfile;"              \
 783  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 784
 785 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 786
 787 #endif  /* __CONFIG_H */