include/configs/MPC8536DS.h

   1 /*
   2  * Copyright 2008 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 /*
  24  * mpc8536ds board configuration file
  25  *
  26  */
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 /* High Level Configuration Options */
  31 #define CONFIG_BOOKE            1       /* BOOKE */
  32 #define CONFIG_E500             1       /* BOOKE e500 family */
  33 #define CONFIG_MPC85xx          1       /* MPC8540/60/55/41/48 */
  34 #define CONFIG_MPC8536          1
  35 #define CONFIG_MPC8536DS        1
  36
  37 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  38 #define CONFIG_PCI1             1       /* Enable PCI controller 1 */
  39 #define CONFIG_PCIE1            1       /* PCIE controler 1 (slot 1) */
  40 #define CONFIG_PCIE2            1       /* PCIE controler 2 (slot 2) */
  41 #define CONFIG_PCIE3            1       /* PCIE controler 3 (ULI bridge) */
  42 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  43 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  44
  45 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  46
  47 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  48 #define CONFIG_ENV_OVERWRITE
  49
  50 /*
  51  * When initializing flash, if we cannot find the manufacturer ID,
  52  * assume this is the AMD flash associated with the CDS board.
  53  * This allows booting from a promjet.
  54  */
  55 #define CONFIG_ASSUME_AMD_FLASH
  56
  57 #ifndef __ASSEMBLY__
  58 extern unsigned long get_board_sys_clk(unsigned long dummy);
  59 extern unsigned long get_board_ddr_clk(unsigned long dummy);
  60 #endif
  61 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0) /* sysclk for MPC85xx */
  62 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk(0)
  63 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
  64 #define CONFIG_GET_CLK_FROM_ICS307        /* decode sysclk and ddrclk freq
  65                                              from ICS307 instead of switches */
  66
  67 /*
  68  * These can be toggled for performance analysis, otherwise use default.
  69  */
  70 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  71 #define CONFIG_BTB                      /* toggle branch predition */
  72 #define CONFIG_ADDR_STREAMING           /* toggle addr streaming */
  73
  74 #define CONFIG_ENABLE_36BIT_PHYS        1
  75
  76 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest works on */
  77 #define CONFIG_SYS_MEMTEST_END          0x7fffffff
  78 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  79
  80 /*
  81  * Base addresses -- Note these are effective addresses where the
  82  * actual resources get mapped (not physical addresses)
  83  */
  84 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default */
  85 #define CONFIG_SYS_CCSRBAR              0xffe00000      /* relocated CCSRBAR */
  86 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
  87 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
  88
  89 #define CONFIG_SYS_PCI1_ADDR            (CONFIG_SYS_CCSRBAR+0x8000)
  90 #define CONFIG_SYS_PCIE1_ADDR           (CONFIG_SYS_CCSRBAR+0xa000)
  91 #define CONFIG_SYS_PCIE2_ADDR           (CONFIG_SYS_CCSRBAR+0x9000)
  92 #define CONFIG_SYS_PCIE3_ADDR           (CONFIG_SYS_CCSRBAR+0xb000)
  93
  94 /* DDR Setup */
  95 #define CONFIG_FSL_DDR2
  96 #undef CONFIG_FSL_DDR_INTERACTIVE
  97 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
  98 #define CONFIG_DDR_SPD
  99 #undef CONFIG_DDR_DLL
 100
 101 #undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER        /* DDR controller or DMA? */
 102 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
 103
 104 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 105 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 106
 107 #define CONFIG_NUM_DDR_CONTROLLERS      1
 108 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 109 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 110
 111 /* I2C addresses of SPD EEPROMs */
 112 #define SPD_EEPROM_ADDRESS      0x51    /* CTLR 0 DIMM 0 */
 113 #define CONFIG_SYS_SPD_BUS_NUM          1
 114
 115 /* These are used when DDR doesn't use SPD. */
 116 #define CONFIG_SYS_SDRAM_SIZE           256             /* DDR is 256MB */
 117 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F
 118 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80010102      /* Enable, no interleaving */
 119 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 120 #define CONFIG_SYS_DDR_TIMING_0 0x00260802
 121 #define CONFIG_SYS_DDR_TIMING_1 0x3935d322
 122 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8
 123 #define CONFIG_SYS_DDR_MODE_1           0x00480432
 124 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 125 #define CONFIG_SYS_DDR_INTERVAL 0x06180100
 126 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 127 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000
 128 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000
 129 #define CONFIG_SYS_DDR_OCD_STATUS       0x00000000
 130 #define CONFIG_SYS_DDR_CONTROL          0xC3008000      /* Type = DDR2 */
 131 #define CONFIG_SYS_DDR_CONTROL2 0x04400010
 132
 133 #define CONFIG_SYS_DDR_ERR_INT_EN       0x0000000d
 134 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 135 #define CONFIG_SYS_DDR_SBE              0x00010000
 136
 137 /* FIXME: Not used in fixed_sdram function */
 138 #define CONFIG_SYS_DDR_MODE             0x00000022
 139 #define CONFIG_SYS_DDR_CS1_BNDS 0x00000000
 140 #define CONFIG_SYS_DDR_CS2_BNDS 0x00000FFF      /* Not done */
 141 #define CONFIG_SYS_DDR_CS3_BNDS 0x00000FFF      /* Not done */
 142 #define CONFIG_SYS_DDR_CS4_BNDS 0x00000FFF      /* Not done */
 143 #define CONFIG_SYS_DDR_CS5_BNDS 0x00000FFF      /* Not done */
 144
 145 /* Make sure required options are set */
 146 #ifndef CONFIG_SPD_EEPROM
 147 #error ("CONFIG_SPD_EEPROM is required")
 148 #endif
 149
 150 #undef CONFIG_CLOCKS_IN_MHZ
 151
 152
 153 /*
 154  * Memory map -- xxx -this is wrong, needs updating
 155  *
 156  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 157  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1G non-cacheable
 158  * 0xc000_0000  0xdfff_ffff     PCI                     512M non-cacheable
 159  * 0xe100_0000  0xe3ff_ffff     PCI IO range            4M non-cacheable
 160  *
 161  * Localbus cacheable (TBD)
 162  * 0xXXXX_XXXX  0xXXXX_XXXX     SRAM                    YZ M Cacheable
 163  *
 164  * Localbus non-cacheable
 165  * 0xe000_0000  0xe80f_ffff     Promjet/free            128M non-cacheable
 166  * 0xe800_0000  0xefff_ffff     FLASH                   128M non-cacheable
 167  * 0xffdf_0000  0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
 168  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 169  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 170  */
 171
 172 /*
 173  * Local Bus Definitions
 174  */
 175 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* start of FLASH 128M */
 176
 177 #define CONFIG_SYS_BR0_PRELIM           0xe8001001
 178 #define CONFIG_SYS_OR0_PRELIM           0xf8000ff7
 179
 180 #define CONFIG_SYS_BR1_PRELIM           0xe0001001
 181 #define CONFIG_SYS_OR1_PRELIM           0xf8000ff7
 182
 183 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE + 0x8000000, CONFIG_SYS_FLASH_BASE}
 184 #define CONFIG_SYS_FLASH_QUIET_TEST
 185 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 186
 187 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 188 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 189 #undef  CONFIG_SYS_FLASH_CHECKSUM
 190 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 191 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 192
 193 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE       /* start of monitor */
 194
 195 #define CONFIG_FLASH_CFI_DRIVER
 196 #define CONFIG_SYS_FLASH_CFI
 197 #define CONFIG_SYS_FLASH_EMPTY_INFO
 198 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 199
 200 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 201
 202 #define CONFIG_FSL_PIXIS        1       /* use common PIXIS code */
 203 #define PIXIS_BASE      0xffdf0000      /* PIXIS registers */
 204
 205 #define CONFIG_SYS_BR3_PRELIM   (PIXIS_BASE | 0x0801)   /* port size 8bit */
 206 #define CONFIG_SYS_OR3_PRELIM           0xffffeff7      /* 32KB but only 4k mapped */
 207
 208 #define PIXIS_ID                0x0     /* Board ID at offset 0 */
 209 #define PIXIS_VER               0x1     /* Board version at offset 1 */
 210 #define PIXIS_PVER              0x2     /* PIXIS FPGA version at offset 2 */
 211 #define PIXIS_CSR               0x3     /* PIXIS General control/status register */
 212 #define PIXIS_RST               0x4     /* PIXIS Reset Control register */
 213 #define PIXIS_PWR               0x5     /* PIXIS Power status register */
 214 #define PIXIS_AUX               0x6     /* Auxiliary 1 register */
 215 #define PIXIS_SPD               0x7     /* Register for SYSCLK speed */
 216 #define PIXIS_AUX2              0x8     /* Auxiliary 2 register */
 217 #define PIXIS_VCTL              0x10    /* VELA Control Register */
 218 #define PIXIS_VSTAT             0x11    /* VELA Status Register */
 219 #define PIXIS_VCFGEN0           0x12    /* VELA Config Enable 0 */
 220 #define PIXIS_VCFGEN1           0x13    /* VELA Config Enable 1 */
 221 #define PIXIS_VCORE0            0x14    /* VELA VCORE0 Register */
 222 #define PIXIS_VBOOT             0x16    /* VELA VBOOT Register */
 223 #define PIXIS_VSPEED0           0x17    /* VELA VSpeed 0 */
 224 #define PIXIS_VSPEED1           0x18    /* VELA VSpeed 1 */
 225 #define PIXIS_VSPEED2           0x19    /* VELA VSpeed 2 */
 226 #define PIXIS_VSYSCLK0          0x1A    /* VELA SYSCLK0 Register */
 227 #define PIXIS_VSYSCLK1          0x1B    /* VELA SYSCLK1 Register */
 228 #define PIXIS_VSYSCLK2          0x1C    /* VELA SYSCLK2 Register */
 229 #define PIXIS_VDDRCLK0          0x1D    /* VELA DDRCLK0 Register */
 230 #define PIXIS_VDDRCLK1          0x1E    /* VELA DDRCLK1 Register */
 231 #define PIXIS_VDDRCLK2          0x1F    /* VELA DDRCLK2 Register */
 232 #define PIXIS_VWATCH            0x24    /* Watchdog Register */
 233 #define PIXIS_LED               0x25    /* LED Register */
 234
 235 /* old pixis referenced names */
 236 #define PIXIS_VCLKH             0x19    /* VELA VCLKH register */
 237 #define PIXIS_VCLKL             0x1A    /* VELA VCLKL register */
 238 #define CONFIG_SYS_PIXIS_VBOOT_MASK     0xc0
 239
 240 /* define to use L1 as initial stack */
 241 #define CONFIG_L1_INIT_RAM
 242 #define CONFIG_SYS_INIT_RAM_LOCK        1
 243 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 244 #define CONFIG_SYS_INIT_RAM_END 0x00004000      /* End of used area in RAM */
 245
 246 #define CONFIG_SYS_GBL_DATA_SIZE        128     /* num bytes initial data */
 247 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 248 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 249
 250 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024) /* Reserve 256 kB for Mon */
 251 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 252
 253 /* Serial Port - controlled on board with jumper J8
 254  * open - index 2
 255  * shorted - index 1
 256  */
 257 #define CONFIG_CONS_INDEX       1
 258 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 259 #define CONFIG_SYS_NS16550
 260 #define CONFIG_SYS_NS16550_SERIAL
 261 #define CONFIG_SYS_NS16550_REG_SIZE     1
 262 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 263
 264 #define CONFIG_SYS_BAUDRATE_TABLE       \
 265         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 266
 267 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 268 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 269
 270 /* Use the HUSH parser */
 271 #define CONFIG_SYS_HUSH_PARSER
 272 #ifdef  CONFIG_SYS_HUSH_PARSER
 273 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 274 #endif
 275
 276 /*
 277  * Pass open firmware flat tree
 278  */
 279 #define CONFIG_OF_LIBFDT                1
 280 #define CONFIG_OF_BOARD_SETUP           1
 281 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 282
 283 #define CONFIG_SYS_64BIT_STRTOUL                1
 284 #define CONFIG_SYS_64BIT_VSPRINTF               1
 285
 286
 287 /*
 288  * I2C
 289  */
 290 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 291 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 292 #undef  CONFIG_SOFT_I2C         /* I2C bit-banged */
 293 #define CONFIG_I2C_MULTI_BUS
 294 #define CONFIG_I2C_CMD_TREE
 295 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 296 #define CONFIG_SYS_I2C_SLAVE            0x7F
 297 #define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}}     /* Don't probe these addrs */
 298 #define CONFIG_SYS_I2C_OFFSET           0x3000
 299 #define CONFIG_SYS_I2C2_OFFSET          0x3100
 300
 301 /*
 302  * I2C2 EEPROM
 303  */
 304 #define CONFIG_ID_EEPROM
 305 #ifdef CONFIG_ID_EEPROM
 306 #define CONFIG_SYS_I2C_EEPROM_NXID
 307 #endif
 308 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 309 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 310 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 311
 312 /*
 313  * General PCI
 314  * Memory space is mapped 1-1, but I/O space must start from 0.
 315  */
 316
 317 /* PCI view of System Memory */
 318 #define CONFIG_SYS_PCI_MEMORY_BUS       0x00000000
 319 #define CONFIG_SYS_PCI_MEMORY_PHYS      0x00000000
 320 #define CONFIG_SYS_PCI_MEMORY_SIZE      0x80000000
 321
 322 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 323 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 324 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 325 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000
 326 #define CONFIG_SYS_PCI1_IO_PHYS 0xffc00000
 327 #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000      /* 64k */
 328
 329 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 330 #define CONFIG_SYS_PCIE1_MEM_BASE       0x90000000
 331 #define CONFIG_SYS_PCIE1_MEM_PHYS       CONFIG_SYS_PCIE1_MEM_BASE
 332 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x08000000      /* 128M */
 333 #define CONFIG_SYS_PCIE1_IO_BASE        0x00000000
 334 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc10000
 335 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 336
 337 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 338 #define CONFIG_SYS_PCIE2_MEM_BASE       0x98000000
 339 #define CONFIG_SYS_PCIE2_MEM_PHYS       CONFIG_SYS_PCIE2_MEM_BASE
 340 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x08000000      /* 128M */
 341 #define CONFIG_SYS_PCIE2_IO_BASE        0x00000000
 342 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc20000
 343 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 344
 345 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
 346 #define CONFIG_SYS_PCIE3_MEM_BASE       0xa0000000
 347 #define CONFIG_SYS_PCIE3_MEM_PHYS       CONFIG_SYS_PCIE3_MEM_BASE
 348 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 349 #define CONFIG_SYS_PCIE3_IO_BASE        0x00000000
 350 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc30000
 351 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 352
 353 #if defined(CONFIG_PCI)
 354
 355 #define CONFIG_NET_MULTI
 356 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 357
 358 /*PCIE video card used*/
 359 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE3_IO_PHYS
 360
 361 /*PCI video card used*/
 362 /*#define VIDEO_IO_OFFSET       CONFIG_SYS_PCI1_IO_PHYS*/
 363
 364 /* video */
 365 #define CONFIG_VIDEO
 366
 367 #if defined(CONFIG_VIDEO)
 368 #define CONFIG_BIOSEMU
 369 #define CONFIG_CFB_CONSOLE
 370 #define CONFIG_VIDEO_SW_CURSOR
 371 #define CONFIG_VGA_AS_SINGLE_DEVICE
 372 #define CONFIG_ATI_RADEON_FB
 373 #define CONFIG_VIDEO_LOGO
 374 /*#define CONFIG_CONSOLE_CURSOR*/
 375 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_PHYS
 376 #endif
 377
 378 #undef CONFIG_EEPRO100
 379 #undef CONFIG_TULIP
 380 #undef CONFIG_RTL8139
 381
 382 #ifdef CONFIG_RTL8139
 383 /* This macro is used by RTL8139 but not defined in PPC architecture */
 384 #define KSEG1ADDR(x)            ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);})
 385 #define _IO_BASE        0x00000000
 386 #endif
 387
 388 #ifndef CONFIG_PCI_PNP
 389         #define PCI_ENET0_IOADDR        CONFIG_SYS_PCI1_IO_BASE
 390         #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCI1_IO_BASE
 391         #define PCI_IDSEL_NUMBER        0x11    /* IDSEL = AD11 */
 392 #endif
 393
 394 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 395
 396 #endif  /* CONFIG_PCI */
 397
 398 /* SATA */
 399 #define CONFIG_LIBATA
 400 #define CONFIG_FSL_SATA
 401
 402 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 403 #define CONFIG_SATA1
 404 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 405 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 406 #define CONFIG_SATA2
 407 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 408 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 409
 410 #ifdef CONFIG_FSL_SATA
 411 #define CONFIG_LBA48
 412 #define CONFIG_CMD_SATA
 413 #define CONFIG_DOS_PARTITION
 414 #define CONFIG_CMD_EXT2
 415 #endif
 416
 417 #if defined(CONFIG_TSEC_ENET)
 418
 419 #ifndef CONFIG_NET_MULTI
 420 #define CONFIG_NET_MULTI        1
 421 #endif
 422
 423 #define CONFIG_MII              1       /* MII PHY management */
 424 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 425 #define CONFIG_TSEC1    1
 426 #define CONFIG_TSEC1_NAME       "eTSEC1"
 427 #define CONFIG_TSEC3    1
 428 #define CONFIG_TSEC3_NAME       "eTSEC3"
 429
 430 #define TSEC1_PHY_ADDR          1       /* TSEC1 -> PHY1 */
 431 #define TSEC3_PHY_ADDR          0       /* TSEC3 -> PHY0 */
 432
 433 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 434 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 435
 436 #define TSEC1_PHYIDX            0
 437 #define TSEC3_PHYIDX            0
 438
 439 #define CONFIG_ETHPRIME         "eTSEC1"
 440
 441 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 442
 443 #endif  /* CONFIG_TSEC_ENET */
 444
 445 /*
 446  * Environment
 447  */
 448 #define CONFIG_ENV_IS_IN_FLASH  1
 449 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
 450 #define CONFIG_ENV_ADDR         0xfff80000
 451 #else
 452 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + 0x60000)
 453 #endif
 454 #define CONFIG_ENV_SIZE         0x2000
 455 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 456
 457 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 458 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 459
 460 /*
 461  * Command line configuration.
 462  */
 463 #include <config_cmd_default.h>
 464
 465 #define CONFIG_CMD_IRQ
 466 #define CONFIG_CMD_PING
 467 #define CONFIG_CMD_I2C
 468 #define CONFIG_CMD_MII
 469 #define CONFIG_CMD_ELF
 470
 471 #if defined(CONFIG_PCI)
 472 #define CONFIG_CMD_PCI
 473 #define CONFIG_CMD_BEDBUG
 474 #define CONFIG_CMD_NET
 475 #endif
 476
 477 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 478
 479 /*
 480  * Miscellaneous configurable options
 481  */
 482 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 483 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
 484 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 485 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 486 #if defined(CONFIG_CMD_KGDB)
 487 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 488 #else
 489 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 490 #endif
 491 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 492 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 493 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 494 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 495
 496 /*
 497  * For booting Linux, the board info and command line data
 498  * have to be in the first 8 MB of memory, since this is
 499  * the maximum mapped by the Linux kernel during initialization.
 500  */
 501 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20)       /* Initial Memory map for Linux*/
 502
 503 /*
 504  * Internal Definitions
 505  *
 506  * Boot Flags
 507  */
 508 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH */
 509 #define BOOTFLAG_WARM   0x02            /* Software reboot */
 510
 511 #if defined(CONFIG_CMD_KGDB)
 512 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 513 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 514 #endif
 515
 516 /*
 517  * Environment Configuration
 518  */
 519
 520 /* The mac addresses for all ethernet interface */
 521 #if defined(CONFIG_TSEC_ENET)
 522 #define CONFIG_HAS_ETH0
 523 #define CONFIG_ETHADDR  00:E0:0C:02:00:FD
 524 #define CONFIG_HAS_ETH1
 525 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD
 526 #define CONFIG_HAS_ETH2
 527 #define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD
 528 #define CONFIG_HAS_ETH3
 529 #define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD
 530 #endif
 531
 532 #define CONFIG_IPADDR           192.168.1.254
 533
 534 #define CONFIG_HOSTNAME         unknown
 535 #define CONFIG_ROOTPATH         /opt/nfsroot
 536 #define CONFIG_BOOTFILE         uImage
 537 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 538
 539 #define CONFIG_SERVERIP         192.168.1.1
 540 #define CONFIG_GATEWAYIP        192.168.1.1
 541 #define CONFIG_NETMASK          255.255.255.0
 542
 543 /* default location for tftp and bootm */
 544 #define CONFIG_LOADADDR         1000000
 545
 546 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 547 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 548
 549 #define CONFIG_BAUDRATE 115200
 550
 551 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 552  "netdev=eth0\0"                                                \
 553  "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                         \
 554  "tftpflash=tftpboot $loadaddr $uboot; "                        \
 555         "protect off " MK_STR(TEXT_BASE) " +$filesize; "        \
 556         "erase " MK_STR(TEXT_BASE) " +$filesize; "              \
 557         "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "      \
 558         "protect on " MK_STR(TEXT_BASE) " +$filesize; "         \
 559         "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"     \
 560  "consoledev=ttyS0\0"                           \
 561  "ramdiskaddr=2000000\0"                        \
 562  "ramdiskfile=8536ds/ramdisk.uboot\0"           \
 563  "fdtaddr=c00000\0"                             \
 564  "fdtfile=8536ds/mpc8536ds.dtb\0"               \
 565  "bdev=sda3\0"
 566
 567 #define CONFIG_HDBOOT                           \
 568  "setenv bootargs root=/dev/$bdev rw "          \
 569  "console=$consoledev,$baudrate $othbootargs;"  \
 570  "tftp $loadaddr $bootfile;"                    \
 571  "tftp $fdtaddr $fdtfile;"                      \
 572  "bootm $loadaddr - $fdtaddr"
 573
 574 #define CONFIG_NFSBOOTCOMMAND           \
 575  "setenv bootargs root=/dev/nfs rw "    \
 576  "nfsroot=$serverip:$rootpath "         \
 577  "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 578  "console=$consoledev,$baudrate $othbootargs;"  \
 579  "tftp $loadaddr $bootfile;"            \
 580  "tftp $fdtaddr $fdtfile;"              \
 581  "bootm $loadaddr - $fdtaddr"
 582
 583 #define CONFIG_RAMBOOTCOMMAND           \
 584  "setenv bootargs root=/dev/ram rw "    \
 585  "console=$consoledev,$baudrate $othbootargs;"  \
 586  "tftp $ramdiskaddr $ramdiskfile;"      \
 587  "tftp $loadaddr $bootfile;"            \
 588  "tftp $fdtaddr $fdtfile;"              \
 589  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 590
 591 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 592
 593 #endif  /* __CONFIG_H */