include/configs/MPC8572DS.h

   1 /*
   2  * Copyright 2007-2008 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 /*
  24  * mpc8572ds board configuration file
  25  *
  26  */
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 #ifdef CONFIG_MK_36BIT
  31 #define CONFIG_PHYS_64BIT
  32 #endif
  33
  34 /* High Level Configuration Options */
  35 #define CONFIG_BOOKE            1       /* BOOKE */
  36 #define CONFIG_E500             1       /* BOOKE e500 family */
  37 #define CONFIG_MPC85xx          1       /* MPC8540/60/55/41/48 */
  38 #define CONFIG_MPC8572          1
  39 #define CONFIG_MPC8572DS        1
  40 #define CONFIG_MP               1       /* support multiple processors */
  41
  42 #define CONFIG_FSL_ELBC         1       /* Has Enhanced localbus controller */
  43 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  44 #define CONFIG_PCIE1            1       /* PCIE controler 1 (slot 1) */
  45 #define CONFIG_PCIE2            1       /* PCIE controler 2 (slot 2) */
  46 #define CONFIG_PCIE3            1       /* PCIE controler 3 (ULI bridge) */
  47 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  48 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  49 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  50
  51 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  52
  53 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  54 #define CONFIG_ENV_OVERWRITE
  55
  56 #ifndef __ASSEMBLY__
  57 extern unsigned long get_board_sys_clk(unsigned long dummy);
  58 extern unsigned long get_board_ddr_clk(unsigned long dummy);
  59 #endif
  60 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0) /* sysclk for MPC85xx */
  61 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk(0) /* ddrclk for MPC85xx */
  62 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
  63 #define CONFIG_GET_CLK_FROM_ICS307        /* decode sysclk and ddrclk freq
  64                                              from ICS307 instead of switches */
  65
  66 /*
  67  * These can be toggled for performance analysis, otherwise use default.
  68  */
  69 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  70 #define CONFIG_BTB                      /* toggle branch predition */
  71
  72 #define CONFIG_ENABLE_36BIT_PHYS        1
  73
  74 #ifdef CONFIG_PHYS_64BIT
  75 #define CONFIG_ADDR_MAP                 1
  76 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
  77 #endif
  78
  79 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest works on */
  80 #define CONFIG_SYS_MEMTEST_END          0x7fffffff
  81 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  82
  83 /*
  84  * Base addresses -- Note these are effective addresses where the
  85  * actual resources get mapped (not physical addresses)
  86  */
  87 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default */
  88 #define CONFIG_SYS_CCSRBAR              0xffe00000      /* relocated CCSRBAR */
  89 #ifdef CONFIG_PHYS_64BIT
  90 #define CONFIG_SYS_CCSRBAR_PHYS         0xfffe00000ull  /* physical addr of CCSRBAR */
  91 #else
  92 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
  93 #endif
  94 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
  95
  96 #define CONFIG_SYS_PCIE3_ADDR           (CONFIG_SYS_CCSRBAR+0x8000)
  97 #define CONFIG_SYS_PCIE2_ADDR           (CONFIG_SYS_CCSRBAR+0x9000)
  98 #define CONFIG_SYS_PCIE1_ADDR           (CONFIG_SYS_CCSRBAR+0xa000)
  99
 100 /* DDR Setup */
 101 #define CONFIG_VERY_BIG_RAM
 102 #define CONFIG_FSL_DDR2
 103 #undef CONFIG_FSL_DDR_INTERACTIVE
 104 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
 105 #define CONFIG_DDR_SPD
 106 #undef CONFIG_DDR_DLL
 107
 108 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 109 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
 110
 111 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 112 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 113
 114 #define CONFIG_NUM_DDR_CONTROLLERS      2
 115 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 116 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 117
 118 /* I2C addresses of SPD EEPROMs */
 119 #define CONFIG_SYS_SPD_BUS_NUM          1       /* SPD EEPROMS locate on I2C bus 1 */
 120 #define SPD_EEPROM_ADDRESS1     0x51    /* CTLR 0 DIMM 0 */
 121 #define SPD_EEPROM_ADDRESS2     0x52    /* CTLR 1 DIMM 0 */
 122
 123 /* These are used when DDR doesn't use SPD.  */
 124 #define CONFIG_SYS_SDRAM_SIZE           512             /* DDR is 512MB */
 125 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000001F
 126 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80010202      /* Enable, no interleaving */
 127 #define CONFIG_SYS_DDR_TIMING_3         0x00020000
 128 #define CONFIG_SYS_DDR_TIMING_0         0x00260802
 129 #define CONFIG_SYS_DDR_TIMING_1         0x626b2634
 130 #define CONFIG_SYS_DDR_TIMING_2         0x062874cf
 131 #define CONFIG_SYS_DDR_MODE_1           0x00440462
 132 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 133 #define CONFIG_SYS_DDR_INTERVAL         0x0c300100
 134 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 135 #define CONFIG_SYS_DDR_CLK_CTRL         0x00800000
 136 #define CONFIG_SYS_DDR_OCD_CTRL         0x00000000
 137 #define CONFIG_SYS_DDR_OCD_STATUS       0x00000000
 138 #define CONFIG_SYS_DDR_CONTROL          0xc3000008      /* Type = DDR2 */
 139 #define CONFIG_SYS_DDR_CONTROL2         0x24400000
 140
 141 #define CONFIG_SYS_DDR_ERR_INT_EN       0x0000000d
 142 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 143 #define CONFIG_SYS_DDR_SBE              0x00010000
 144
 145 /*
 146  * Make sure required options are set
 147  */
 148 #ifndef CONFIG_SPD_EEPROM
 149 #error ("CONFIG_SPD_EEPROM is required")
 150 #endif
 151
 152 #undef CONFIG_CLOCKS_IN_MHZ
 153
 154 /*
 155  * Memory map
 156  *
 157  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 158  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1G non-cacheable
 159  * 0xc000_0000  0xdfff_ffff     PCI                     512M non-cacheable
 160  * 0xe100_0000  0xe3ff_ffff     PCI IO range            4M non-cacheable
 161  *
 162  * Localbus cacheable (TBD)
 163  * 0xXXXX_XXXX  0xXXXX_XXXX     SRAM                    YZ M Cacheable
 164  *
 165  * Localbus non-cacheable
 166  * 0xe000_0000  0xe80f_ffff     Promjet/free            128M non-cacheable
 167  * 0xe800_0000  0xefff_ffff     FLASH                   128M non-cacheable
 168  * 0xffa0_0000  0xffaf_ffff     NAND                    1M non-cacheable
 169  * 0xffdf_0000  0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
 170  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 171  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 172  */
 173
 174 /*
 175  * Local Bus Definitions
 176  */
 177 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* start of FLASH 128M */
 178 #ifdef CONFIG_PHYS_64BIT
 179 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 180 #else
 181 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 182 #endif
 183
 184 #define CONFIG_SYS_BR0_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V)
 185 #define CONFIG_SYS_OR0_PRELIM   0xf8000ff7
 186
 187 #define CONFIG_SYS_BR1_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 188 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 189
 190 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 191 #define CONFIG_SYS_FLASH_QUIET_TEST
 192 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 193
 194 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 195 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 196 #undef  CONFIG_SYS_FLASH_CHECKSUM
 197 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 198 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 199
 200 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE       /* start of monitor */
 201
 202 #define CONFIG_FLASH_CFI_DRIVER
 203 #define CONFIG_SYS_FLASH_CFI
 204 #define CONFIG_SYS_FLASH_EMPTY_INFO
 205 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 206
 207 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 208
 209 #define CONFIG_FSL_PIXIS        1       /* use common PIXIS code */
 210 #define PIXIS_BASE      0xffdf0000      /* PIXIS registers */
 211 #ifdef CONFIG_PHYS_64BIT
 212 #define PIXIS_BASE_PHYS 0xfffdf0000ull
 213 #else
 214 #define PIXIS_BASE_PHYS PIXIS_BASE
 215 #endif
 216
 217 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 218 #define CONFIG_SYS_OR3_PRELIM           0xffffeff7      /* 32KB but only 4k mapped */
 219
 220 #define PIXIS_ID                0x0     /* Board ID at offset 0 */
 221 #define PIXIS_VER               0x1     /* Board version at offset 1 */
 222 #define PIXIS_PVER              0x2     /* PIXIS FPGA version at offset 2 */
 223 #define PIXIS_CSR               0x3     /* PIXIS General control/status register */
 224 #define PIXIS_RST               0x4     /* PIXIS Reset Control register */
 225 #define PIXIS_PWR               0x5     /* PIXIS Power status register */
 226 #define PIXIS_AUX               0x6     /* Auxiliary 1 register */
 227 #define PIXIS_SPD               0x7     /* Register for SYSCLK speed */
 228 #define PIXIS_AUX2              0x8     /* Auxiliary 2 register */
 229 #define PIXIS_VCTL              0x10    /* VELA Control Register */
 230 #define PIXIS_VSTAT             0x11    /* VELA Status Register */
 231 #define PIXIS_VCFGEN0           0x12    /* VELA Config Enable 0 */
 232 #define PIXIS_VCFGEN1           0x13    /* VELA Config Enable 1 */
 233 #define PIXIS_VCORE0            0x14    /* VELA VCORE0 Register */
 234 #define PIXIS_VBOOT             0x16    /* VELA VBOOT Register */
 235 #define PIXIS_VBOOT_LBMAP       0xc0    /* VBOOT - CFG_LBMAP */
 236 #define PIXIS_VBOOT_LBMAP_NOR0  0x00    /* cfg_lbmap - boot from NOR 0 */
 237 #define PIXIS_VBOOT_LBMAP_PJET  0x01    /* cfg_lbmap - boot from projet */
 238 #define PIXIS_VBOOT_LBMAP_NAND  0x02    /* cfg_lbmap - boot from NAND */
 239 #define PIXIS_VBOOT_LBMAP_NOR1  0x03    /* cfg_lbmap - boot from NOR 1 */
 240 #define PIXIS_VSPEED0           0x17    /* VELA VSpeed 0 */
 241 #define PIXIS_VSPEED1           0x18    /* VELA VSpeed 1 */
 242 #define PIXIS_VSPEED2           0x19    /* VELA VSpeed 2 */
 243 #define PIXIS_VSYSCLK0          0x1C    /* VELA SYSCLK0 Register */
 244 #define PIXIS_VSYSCLK1          0x1D    /* VELA SYSCLK1 Register */
 245 #define PIXIS_VSYSCLK2          0x1E    /* VELA SYSCLK2 Register */
 246 #define PIXIS_VDDRCLK0          0x1F    /* VELA DDRCLK0 Register */
 247 #define PIXIS_VDDRCLK1          0x20    /* VELA DDRCLK1 Register */
 248 #define PIXIS_VDDRCLK2          0x21    /* VELA DDRCLK2 Register */
 249 #define PIXIS_VWATCH            0x24    /* Watchdog Register */
 250 #define PIXIS_LED               0x25    /* LED Register */
 251
 252 /* old pixis referenced names */
 253 #define PIXIS_VCLKH             0x19    /* VELA VCLKH register */
 254 #define PIXIS_VCLKL             0x1A    /* VELA VCLKL register */
 255 #define CONFIG_SYS_PIXIS_VBOOT_MASK     0xc0
 256 #define PIXIS_VSPEED2_TSEC1SER  0x8
 257 #define PIXIS_VSPEED2_TSEC2SER  0x4
 258 #define PIXIS_VSPEED2_TSEC3SER  0x2
 259 #define PIXIS_VSPEED2_TSEC4SER  0x1
 260 #define PIXIS_VCFGEN1_TSEC1SER  0x20
 261 #define PIXIS_VCFGEN1_TSEC2SER  0x20
 262 #define PIXIS_VCFGEN1_TSEC3SER  0x20
 263 #define PIXIS_VCFGEN1_TSEC4SER  0x20
 264 #define PIXIS_VSPEED2_MASK      (PIXIS_VSPEED2_TSEC1SER \
 265                                         | PIXIS_VSPEED2_TSEC2SER \
 266                                         | PIXIS_VSPEED2_TSEC3SER \
 267                                         | PIXIS_VSPEED2_TSEC4SER)
 268 #define PIXIS_VCFGEN1_MASK      (PIXIS_VCFGEN1_TSEC1SER \
 269                                         | PIXIS_VCFGEN1_TSEC2SER \
 270                                         | PIXIS_VCFGEN1_TSEC3SER \
 271                                         | PIXIS_VCFGEN1_TSEC4SER)
 272
 273 #define CONFIG_SYS_INIT_RAM_LOCK        1
 274 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 275 #define CONFIG_SYS_INIT_RAM_END 0x00004000      /* End of used area in RAM */
 276
 277 #define CONFIG_SYS_GBL_DATA_SIZE        128     /* num bytes initial data */
 278 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 279 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 280
 281 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024) /* Reserve 256 kB for Mon */
 282 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 283
 284 #define CONFIG_SYS_NAND_BASE            0xffa00000
 285 #ifdef CONFIG_PHYS_64BIT
 286 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 287 #else
 288 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 289 #endif
 290 #define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE,\
 291                                 CONFIG_SYS_NAND_BASE + 0x40000, \
 292                                 CONFIG_SYS_NAND_BASE + 0x80000,\
 293                                 CONFIG_SYS_NAND_BASE + 0xC0000}
 294 #define CONFIG_SYS_MAX_NAND_DEVICE    4
 295 #define CONFIG_MTD_NAND_VERIFY_WRITE
 296 #define CONFIG_CMD_NAND         1
 297 #define CONFIG_NAND_FSL_ELBC    1
 298 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 299
 300 /* NAND flash config */
 301 #define CONFIG_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 302                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 303                                | BR_PS_8               /* Port Size = 8 bit */ \
 304                                | BR_MS_FCM             /* MSEL = FCM */ \
 305                                | BR_V)                 /* valid */
 306 #define CONFIG_NAND_OR_PRELIM  (0xFFFC0000            /* length 256K */ \
 307                                | OR_FCM_PGS            /* Large Page*/ \
 308                                | OR_FCM_CSCT \
 309                                | OR_FCM_CST \
 310                                | OR_FCM_CHT \
 311                                | OR_FCM_SCY_1 \
 312                                | OR_FCM_TRLX \
 313                                | OR_FCM_EHTR)
 314
 315 #define CONFIG_SYS_BR2_PRELIM  CONFIG_NAND_BR_PRELIM  /* NAND Base Address */
 316 #define CONFIG_SYS_OR2_PRELIM  CONFIG_NAND_OR_PRELIM  /* NAND Options */
 317
 318 #define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000))\
 319                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 320                                | BR_PS_8               /* Port Size = 8 bit */ \
 321                                | BR_MS_FCM             /* MSEL = FCM */ \
 322                                | BR_V)                 /* valid */
 323 #define CONFIG_SYS_OR4_PRELIM  CONFIG_NAND_OR_PRELIM     /* NAND Options */
 324 #define CONFIG_SYS_BR5_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000))\
 325                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 326                                | BR_PS_8               /* Port Size = 8 bit */ \
 327                                | BR_MS_FCM             /* MSEL = FCM */ \
 328                                | BR_V)                 /* valid */
 329 #define CONFIG_SYS_OR5_PRELIM  CONFIG_NAND_OR_PRELIM     /* NAND Options */
 330
 331 #define CONFIG_SYS_BR6_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000))\
 332                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 333                                | BR_PS_8               /* Port Size = 8 bit */ \
 334                                | BR_MS_FCM             /* MSEL = FCM */ \
 335                                | BR_V)                 /* valid */
 336 #define CONFIG_SYS_OR6_PRELIM  CONFIG_NAND_OR_PRELIM     /* NAND Options */
 337
 338
 339 /* Serial Port - controlled on board with jumper J8
 340  * open - index 2
 341  * shorted - index 1
 342  */
 343 #define CONFIG_CONS_INDEX       1
 344 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 345 #define CONFIG_SYS_NS16550
 346 #define CONFIG_SYS_NS16550_SERIAL
 347 #define CONFIG_SYS_NS16550_REG_SIZE     1
 348 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 349
 350 #define CONFIG_SYS_BAUDRATE_TABLE       \
 351         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 352
 353 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 354 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 355
 356 /* Use the HUSH parser */
 357 #define CONFIG_SYS_HUSH_PARSER
 358 #ifdef  CONFIG_SYS_HUSH_PARSER
 359 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 360 #endif
 361
 362 /*
 363  * Pass open firmware flat tree
 364  */
 365 #define CONFIG_OF_LIBFDT                1
 366 #define CONFIG_OF_BOARD_SETUP           1
 367 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 368
 369 /* new uImage format support */
 370 #define CONFIG_FIT              1
 371 #define CONFIG_FIT_VERBOSE      1 /* enable fit_format_{error,warning}() */
 372
 373 /* I2C */
 374 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 375 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 376 #undef  CONFIG_SOFT_I2C         /* I2C bit-banged */
 377 #define CONFIG_I2C_MULTI_BUS
 378 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 379 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 380 #define CONFIG_SYS_I2C_SLAVE            0x7F
 381 #define CONFIG_SYS_I2C_NOPROBES {{0,0x29}}/* Don't probe these addrs */
 382 #define CONFIG_SYS_I2C_OFFSET           0x3000
 383 #define CONFIG_SYS_I2C2_OFFSET          0x3100
 384
 385 /*
 386  * I2C2 EEPROM
 387  */
 388 #define CONFIG_ID_EEPROM
 389 #ifdef CONFIG_ID_EEPROM
 390 #define CONFIG_SYS_I2C_EEPROM_NXID
 391 #endif
 392 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 393 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 394 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 395
 396 /*
 397  * General PCI
 398  * Memory space is mapped 1-1, but I/O space must start from 0.
 399  */
 400
 401 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
 402 #define CONFIG_SYS_PCIE3_MEM_VIRT       0x80000000
 403 #ifdef CONFIG_PHYS_64BIT
 404 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 405 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc00000000ull
 406 #else
 407 #define CONFIG_SYS_PCIE3_MEM_BUS        0x80000000
 408 #define CONFIG_SYS_PCIE3_MEM_PHYS       0x80000000
 409 #endif
 410 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 411 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc00000
 412 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
 413 #ifdef CONFIG_PHYS_64BIT
 414 #define CONFIG_SYS_PCIE3_IO_PHYS        0xfffc00000ull
 415 #else
 416 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc00000
 417 #endif
 418 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 419
 420 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 421 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 422 #ifdef CONFIG_PHYS_64BIT
 423 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 424 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 425 #else
 426 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 427 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 428 #endif
 429 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 430 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 431 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
 432 #ifdef CONFIG_PHYS_64BIT
 433 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 434 #else
 435 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 436 #endif
 437 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 438
 439 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 440 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xc0000000
 441 #ifdef CONFIG_PHYS_64BIT
 442 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 443 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc40000000ull
 444 #else
 445 #define CONFIG_SYS_PCIE1_MEM_BUS        0xc0000000
 446 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc0000000
 447 #endif
 448 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 449 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc20000
 450 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
 451 #ifdef CONFIG_PHYS_64BIT
 452 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc20000ull
 453 #else
 454 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc20000
 455 #endif
 456 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 457
 458 #if defined(CONFIG_PCI)
 459
 460 /*PCIE video card used*/
 461 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE1_IO_VIRT
 462
 463 /* video */
 464 #define CONFIG_VIDEO
 465
 466 #if defined(CONFIG_VIDEO)
 467 #define CONFIG_BIOSEMU
 468 #define CONFIG_CFB_CONSOLE
 469 #define CONFIG_VIDEO_SW_CURSOR
 470 #define CONFIG_VGA_AS_SINGLE_DEVICE
 471 #define CONFIG_ATI_RADEON_FB
 472 #define CONFIG_VIDEO_LOGO
 473 /*#define CONFIG_CONSOLE_CURSOR*/
 474 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 475 #endif
 476
 477 #define CONFIG_NET_MULTI
 478 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 479
 480 #undef CONFIG_EEPRO100
 481 #undef CONFIG_TULIP
 482 #undef CONFIG_RTL8139
 483
 484 #ifndef CONFIG_PCI_PNP
 485         #define PCI_ENET0_IOADDR        CONFIG_SYS_PCIE3_IO_BUS
 486         #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCIE3_IO_BUS
 487         #define PCI_IDSEL_NUMBER        0x11    /* IDSEL = AD11 */
 488 #endif
 489
 490 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 491 #define CONFIG_DOS_PARTITION
 492 #define CONFIG_SCSI_AHCI
 493
 494 #ifdef CONFIG_SCSI_AHCI
 495 #define CONFIG_SATA_ULI5288
 496 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     4
 497 #define CONFIG_SYS_SCSI_MAX_LUN 1
 498 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
 499 #define CONFIG_SYS_SCSI_MAXDEVICE       CONFIG_SYS_SCSI_MAX_DEVICE
 500 #endif /* SCSI */
 501
 502 #endif  /* CONFIG_PCI */
 503
 504
 505 #if defined(CONFIG_TSEC_ENET)
 506
 507 #ifndef CONFIG_NET_MULTI
 508 #define CONFIG_NET_MULTI        1
 509 #endif
 510
 511 #define CONFIG_MII              1       /* MII PHY management */
 512 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 513 #define CONFIG_TSEC1    1
 514 #define CONFIG_TSEC1_NAME       "eTSEC1"
 515 #define CONFIG_TSEC2    1
 516 #define CONFIG_TSEC2_NAME       "eTSEC2"
 517 #define CONFIG_TSEC3    1
 518 #define CONFIG_TSEC3_NAME       "eTSEC3"
 519 #define CONFIG_TSEC4    1
 520 #define CONFIG_TSEC4_NAME       "eTSEC4"
 521
 522 #define CONFIG_PIXIS_SGMII_CMD
 523 #define CONFIG_FSL_SGMII_RISER  1
 524 #define SGMII_RISER_PHY_OFFSET  0x1c
 525
 526 #ifdef CONFIG_FSL_SGMII_RISER
 527 #define CONFIG_SYS_TBIPA_VALUE          0x10 /* avoid conflict with eTSEC4 paddr */
 528 #endif
 529
 530 #define TSEC1_PHY_ADDR          0
 531 #define TSEC2_PHY_ADDR          1
 532 #define TSEC3_PHY_ADDR          2
 533 #define TSEC4_PHY_ADDR          3
 534
 535 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 536 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 537 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 538 #define TSEC4_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 539
 540 #define TSEC1_PHYIDX            0
 541 #define TSEC2_PHYIDX            0
 542 #define TSEC3_PHYIDX            0
 543 #define TSEC4_PHYIDX            0
 544
 545 #define CONFIG_ETHPRIME         "eTSEC1"
 546
 547 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 548 #endif  /* CONFIG_TSEC_ENET */
 549
 550 /*
 551  * Environment
 552  */
 553 #define CONFIG_ENV_IS_IN_FLASH  1
 554 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
 555 #define CONFIG_ENV_ADDR         0xfff80000
 556 #else
 557 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 558 #endif
 559 #define CONFIG_ENV_SIZE         0x2000
 560 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 561
 562 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 563 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 564
 565 /*
 566  * Command line configuration.
 567  */
 568 #include <config_cmd_default.h>
 569
 570 #define CONFIG_CMD_IRQ
 571 #define CONFIG_CMD_PING
 572 #define CONFIG_CMD_I2C
 573 #define CONFIG_CMD_MII
 574 #define CONFIG_CMD_ELF
 575 #define CONFIG_CMD_IRQ
 576 #define CONFIG_CMD_SETEXPR
 577
 578 #if defined(CONFIG_PCI)
 579 #define CONFIG_CMD_PCI
 580 #define CONFIG_CMD_NET
 581 #define CONFIG_CMD_SCSI
 582 #define CONFIG_CMD_EXT2
 583 #endif
 584
 585 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 586
 587 /*
 588  * Miscellaneous configurable options
 589  */
 590 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 591 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
 592 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 593 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 594 #if defined(CONFIG_CMD_KGDB)
 595 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 596 #else
 597 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 598 #endif
 599 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 600 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 601 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 602 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 603
 604 /*
 605  * For booting Linux, the board info and command line data
 606  * have to be in the first 16 MB of memory, since this is
 607  * the maximum mapped by the Linux kernel during initialization.
 608  */
 609 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
 610
 611 /*
 612  * Internal Definitions
 613  *
 614  * Boot Flags
 615  */
 616 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH */
 617 #define BOOTFLAG_WARM   0x02            /* Software reboot */
 618
 619 #if defined(CONFIG_CMD_KGDB)
 620 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 621 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 622 #endif
 623
 624 /*
 625  * Environment Configuration
 626  */
 627
 628 /* The mac addresses for all ethernet interface */
 629 #if defined(CONFIG_TSEC_ENET)
 630 #define CONFIG_HAS_ETH0
 631 #define CONFIG_ETHADDR  00:E0:0C:02:00:FD
 632 #define CONFIG_HAS_ETH1
 633 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD
 634 #define CONFIG_HAS_ETH2
 635 #define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD
 636 #define CONFIG_HAS_ETH3
 637 #define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD
 638 #endif
 639
 640 #define CONFIG_IPADDR           192.168.1.254
 641
 642 #define CONFIG_HOSTNAME         unknown
 643 #define CONFIG_ROOTPATH         /opt/nfsroot
 644 #define CONFIG_BOOTFILE         uImage
 645 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 646
 647 #define CONFIG_SERVERIP         192.168.1.1
 648 #define CONFIG_GATEWAYIP        192.168.1.1
 649 #define CONFIG_NETMASK          255.255.255.0
 650
 651 /* default location for tftp and bootm */
 652 #define CONFIG_LOADADDR         1000000
 653
 654 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 655 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 656
 657 #define CONFIG_BAUDRATE 115200
 658
 659 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 660  "memctl_intlv_ctl=2\0"                                         \
 661  "netdev=eth0\0"                                                \
 662  "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                         \
 663  "tftpflash=tftpboot $loadaddr $uboot; "                        \
 664         "protect off " MK_STR(TEXT_BASE) " +$filesize; "        \
 665         "erase " MK_STR(TEXT_BASE) " +$filesize; "              \
 666         "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "      \
 667         "protect on " MK_STR(TEXT_BASE) " +$filesize; "         \
 668         "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"     \
 669  "consoledev=ttyS0\0"                           \
 670  "ramdiskaddr=2000000\0"                        \
 671  "ramdiskfile=8572ds/ramdisk.uboot\0"           \
 672  "fdtaddr=c00000\0"                             \
 673  "fdtfile=8572ds/mpc8572ds.dtb\0"               \
 674  "bdev=sda3\0"
 675
 676 #define CONFIG_HDBOOT                           \
 677  "setenv bootargs root=/dev/$bdev rw "          \
 678  "console=$consoledev,$baudrate $othbootargs;"  \
 679  "tftp $loadaddr $bootfile;"                    \
 680  "tftp $fdtaddr $fdtfile;"                      \
 681  "bootm $loadaddr - $fdtaddr"
 682
 683 #define CONFIG_NFSBOOTCOMMAND           \
 684  "setenv bootargs root=/dev/nfs rw "    \
 685  "nfsroot=$serverip:$rootpath "         \
 686  "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 687  "console=$consoledev,$baudrate $othbootargs;"  \
 688  "tftp $loadaddr $bootfile;"            \
 689  "tftp $fdtaddr $fdtfile;"              \
 690  "bootm $loadaddr - $fdtaddr"
 691
 692 #define CONFIG_RAMBOOTCOMMAND           \
 693  "setenv bootargs root=/dev/ram rw "    \
 694  "console=$consoledev,$baudrate $othbootargs;"  \
 695  "tftp $ramdiskaddr $ramdiskfile;"      \
 696  "tftp $loadaddr $bootfile;"            \
 697  "tftp $fdtaddr $fdtfile;"              \
 698  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 699
 700 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 701
 702 #endif  /* __CONFIG_H */