include/configs/MPC8610HPCD.h

   1 /*
   2  * Copyright 2007 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * Version 2 as published by the Free Software Foundation.
   7  */
   8
   9 /*
  10  * MPC8610HPCD board configuration file
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 /* High Level Configuration Options */
  17 #define CONFIG_MPC86xx          1       /* MPC86xx */
  18 #define CONFIG_MPC8610          1       /* MPC8610 specific */
  19 #define CONFIG_MPC8610HPCD      1       /* MPC8610HPCD board specific */
  20 #define CONFIG_NUM_CPUS         1       /* Number of CPUs in the system */
  21 #define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */
  22
  23 #define CONFIG_FSL_DIU_FB       1       /* FSL DIU */
  24
  25 /* video */
  26 #undef CONFIG_VIDEO
  27
  28 #if defined(CONFIG_VIDEO)
  29 #define CONFIG_CFB_CONSOLE
  30 #define CONFIG_VGA_AS_SINGLE_DEVICE
  31 #endif
  32
  33 #ifdef RUN_DIAG
  34 #define CONFIG_SYS_DIAG_ADDR            0xff800000
  35 #endif
  36
  37 /*
  38  * virtual address to be used for temporary mappings.  There
  39  * should be 128k free at this VA.
  40  */
  41 #define CONFIG_SYS_SCRATCH_VA   0xc0000000
  42
  43 #define CONFIG_PCI              1       /* Enable PCI/PCIE*/
  44 #define CONFIG_PCI1             1       /* PCI controler 1 */
  45 #define CONFIG_PCIE1            1       /* PCIe 1 connected to ULI bridge */
  46 #define CONFIG_PCIE2            1       /* PCIe 2 connected to slot */
  47 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  48 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  49 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  50
  51 #define CONFIG_ENV_OVERWRITE
  52 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
  53
  54 #define CONFIG_HIGH_BATS        1       /* High BATs supported & enabled */
  55 #define CONFIG_ALTIVEC          1
  56
  57 /*
  58  * L2CR setup -- make sure this is right for your board!
  59  */
  60 #define CONFIG_SYS_L2
  61 #define L2_INIT         0
  62 #define L2_ENABLE       (L2CR_L2E |0x00100000 )
  63
  64 #ifndef CONFIG_SYS_CLK_FREQ
  65 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
  66 #endif
  67
  68 #define CONFIG_BOARD_EARLY_INIT_F       1       /* Call board_pre_init */
  69 #define CONFIG_MISC_INIT_R              1
  70
  71 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest region */
  72 #define CONFIG_SYS_MEMTEST_END          0x00400000
  73
  74 /*
  75  * Base addresses -- Note these are effective addresses where the
  76  * actual resources get mapped (not physical addresses)
  77  */
  78 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default */
  79 #define CONFIG_SYS_CCSRBAR              0xe0000000      /* relocated CCSRBAR */
  80 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
  81
  82 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  83 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH    0x0
  84
  85 #define CONFIG_SYS_PCI1_ADDR            (CONFIG_SYS_CCSRBAR+0x8000)
  86 #define CONFIG_SYS_PCIE1_ADDR           (CONFIG_SYS_CCSRBAR+0xa000)
  87 #define CONFIG_SYS_PCIE2_ADDR           (CONFIG_SYS_CCSRBAR+0x9000)
  88
  89 #define CONFIG_SYS_DIU_ADDR             (CONFIG_SYS_CCSRBAR+0x2c000)
  90
  91 /* DDR Setup */
  92 #define CONFIG_FSL_DDR2
  93 #undef CONFIG_FSL_DDR_INTERACTIVE
  94 #define CONFIG_SPD_EEPROM               /* Use SPD for DDR */
  95 #define CONFIG_DDR_SPD
  96
  97 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
  98 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
  99
 100 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000      /* DDR is system memory*/
 101 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 102 #define CONFIG_SYS_MAX_DDR_BAT_SIZE     0x80000000      /* BAT mapping size */
 103 #define CONFIG_VERY_BIG_RAM
 104
 105 #define MPC86xx_DDR_SDRAM_CLK_CNTL
 106
 107 #define CONFIG_NUM_DDR_CONTROLLERS      1
 108 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 109 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 110
 111 #define SPD_EEPROM_ADDRESS1     0x51    /* CTLR 0 DIMM 0 */
 112
 113 /* These are used when DDR doesn't use SPD.  */
 114 #define CONFIG_SYS_SDRAM_SIZE   256             /* DDR is 256MB */
 115
 116 #if 0 /* TODO */
 117 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000000F
 118 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80010202      /* Enable, no interleaving */
 119 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 120 #define CONFIG_SYS_DDR_TIMING_0 0x00260802
 121 #define CONFIG_SYS_DDR_TIMING_1 0x3935d322
 122 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8
 123 #define CONFIG_SYS_DDR_MODE_1           0x00480432
 124 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 125 #define CONFIG_SYS_DDR_INTERVAL 0x06180100
 126 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 127 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000
 128 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000
 129 #define CONFIG_SYS_DDR_OCD_STATUS       0x00000000
 130 #define CONFIG_SYS_DDR_CONTROL          0xe3008000      /* Type = DDR2 */
 131 #define CONFIG_SYS_DDR_CONTROL2 0x04400010
 132
 133 #define CONFIG_SYS_DDR_ERR_INT_EN       0x00000000
 134 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 135 #define CONFIG_SYS_DDR_SBE              0x000f0000
 136
 137 #endif
 138
 139
 140 #define CONFIG_ID_EEPROM
 141 #define CONFIG_SYS_I2C_EEPROM_NXID
 142 #define CONFIG_ID_EEPROM
 143 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
 144 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 145
 146
 147 #define CONFIG_SYS_FLASH_BASE           0xf0000000 /* start of FLASH 128M */
 148 #define CONFIG_SYS_FLASH_BASE2          0xf8000000
 149
 150 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
 151
 152 #define CONFIG_SYS_BR0_PRELIM           0xf8001001 /* port size 16bit */
 153 #define CONFIG_SYS_OR0_PRELIM           0xf8006e65 /* 128MB NOR Flash*/
 154
 155 #define CONFIG_SYS_BR1_PRELIM           0xf0001001 /* port size 16bit */
 156 #define CONFIG_SYS_OR1_PRELIM           0xf8006e65 /* 128MB Promjet */
 157 #if 0 /* TODO */
 158 #define CONFIG_SYS_BR2_PRELIM           0xf0000000
 159 #define CONFIG_SYS_OR2_PRELIM           0xf0000000 /* 256MB NAND Flash - bank 1 */
 160 #endif
 161 #define CONFIG_SYS_BR3_PRELIM           0xe8000801 /* port size 8bit */
 162 #define CONFIG_SYS_OR3_PRELIM           0xfff06ff7 /* 1MB PIXIS area*/
 163
 164
 165 #define CONFIG_FSL_PIXIS        1       /* use common PIXIS code */
 166 #define PIXIS_BASE      0xe8000000      /* PIXIS registers */
 167 #define PIXIS_ID                0x0     /* Board ID at offset 0 */
 168 #define PIXIS_VER               0x1     /* Board version at offset 1 */
 169 #define PIXIS_PVER              0x2     /* PIXIS FPGA version at offset 2 */
 170 #define PIXIS_RST               0x4     /* PIXIS Reset Control register */
 171 #define PIXIS_AUX               0x6     /* PIXIS Auxiliary register; Scratch */
 172 #define PIXIS_SPD               0x7     /* Register for SYSCLK speed */
 173 #define PIXIS_BRDCFG0           0x8     /* PIXIS Board Configuration Register0*/
 174 #define PIXIS_VCTL              0x10    /* VELA Control Register */
 175 #define PIXIS_VCFGEN0           0x12    /* VELA Config Enable 0 */
 176 #define PIXIS_VCFGEN1           0x13    /* VELA Config Enable 1 */
 177 #define PIXIS_VBOOT             0x16    /* VELA VBOOT Register */
 178 #define PIXIS_VSPEED0           0x17    /* VELA VSpeed 0 */
 179 #define PIXIS_VSPEED1           0x18    /* VELA VSpeed 1 */
 180 #define PIXIS_VCLKH             0x19    /* VELA VCLKH register */
 181 #define PIXIS_VCLKL             0x1A    /* VELA VCLKL register */
 182 #define CONFIG_SYS_PIXIS_VBOOT_MASK     0x0C    /* Reset altbank mask*/
 183
 184 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 185 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 186
 187 #undef  CONFIG_SYS_FLASH_CHECKSUM
 188 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 189 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 190 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE       /* start of monitor */
 191 #define CONFIG_SYS_MONITOR_BASE_EARLY   0xfff00000      /* early monitor loc */
 192
 193 #define CONFIG_FLASH_CFI_DRIVER
 194 #define CONFIG_SYS_FLASH_CFI
 195 #define CONFIG_SYS_FLASH_EMPTY_INFO
 196
 197 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 198 #define CONFIG_SYS_RAMBOOT
 199 #else
 200 #undef  CONFIG_SYS_RAMBOOT
 201 #endif
 202
 203 #if defined(CONFIG_SYS_RAMBOOT)
 204 #undef CONFIG_SPD_EEPROM
 205 #define CONFIG_SYS_SDRAM_SIZE   256
 206 #endif
 207
 208 #undef CONFIG_CLOCKS_IN_MHZ
 209
 210 #define CONFIG_SYS_INIT_RAM_LOCK        1
 211 #ifndef CONFIG_SYS_INIT_RAM_LOCK
 212 #define CONFIG_SYS_INIT_RAM_ADDR        0xe4010000      /* Initial RAM address */
 213 #else
 214 #define CONFIG_SYS_INIT_RAM_ADDR        0xe4000000      /* Initial RAM address */
 215 #endif
 216 #define CONFIG_SYS_INIT_RAM_END 0x4000          /* End of used area in RAM */
 217
 218 #define CONFIG_SYS_GBL_DATA_SIZE        128             /* num bytes initial data */
 219 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 220 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 221
 222 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
 223 #define CONFIG_SYS_MALLOC_LEN           (6 * 1024 * 1024)       /* Reserved for malloc */
 224
 225 /* Serial Port */
 226 #define CONFIG_CONS_INDEX       1
 227 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 228 #define CONFIG_SYS_NS16550
 229 #define CONFIG_SYS_NS16550_SERIAL
 230 #define CONFIG_SYS_NS16550_REG_SIZE     1
 231 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 232
 233 #define CONFIG_SYS_BAUDRATE_TABLE \
 234         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 235
 236 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 237 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 238
 239 /* Use the HUSH parser */
 240 #define CONFIG_SYS_HUSH_PARSER
 241 #ifdef  CONFIG_SYS_HUSH_PARSER
 242 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 243 #endif
 244
 245 /*
 246  * Pass open firmware flat tree to kernel
 247  */
 248 #define CONFIG_OF_LIBFDT                1
 249 #define CONFIG_OF_BOARD_SETUP           1
 250 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 251
 252
 253 /* maximum size of the flat tree (8K) */
 254 #define OF_FLAT_TREE_MAX_SIZE   8192
 255
 256 #define CONFIG_SYS_64BIT_VSPRINTF       1
 257 #define CONFIG_SYS_64BIT_STRTOUL        1
 258
 259 /*
 260  * I2C
 261  */
 262 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 263 #define CONFIG_HARD_I2C         /* I2C with hardware support*/
 264 #undef  CONFIG_SOFT_I2C                 /* I2C bit-banged */
 265 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 266 #define CONFIG_SYS_I2C_SLAVE            0x7F
 267 #define CONFIG_SYS_I2C_NOPROBES {0x69}  /* Don't probe these addrs */
 268 #define CONFIG_SYS_I2C_OFFSET           0x3000
 269
 270 /*
 271  * General PCI
 272  * Addresses are mapped 1-1.
 273  */
 274 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
 275 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BUS
 276 #define CONFIG_SYS_PCI1_MEM_VIRT        CONFIG_SYS_PCI1_MEM_BUS
 277 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 278 #define CONFIG_SYS_PCI1_IO_BUS  0x0000000
 279 #define CONFIG_SYS_PCI1_IO_PHYS 0xe1000000
 280 #define CONFIG_SYS_PCI1_IO_VIRT 0xe1000000
 281 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000      /* 1M */
 282
 283 /* controller 1, Base address 0xa000 */
 284 #define CONFIG_SYS_PCIE1_MEM_BUS        0xa0000000
 285 #define CONFIG_SYS_PCIE1_MEM_PHYS       CONFIG_SYS_PCIE1_MEM_BUS
 286 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 287 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 288 #define CONFIG_SYS_PCIE1_IO_PHYS        0xe3000000
 289 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00100000      /* 1M */
 290
 291 /* controller 2, Base Address 0x9000 */
 292 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 293 #define CONFIG_SYS_PCIE2_MEM_PHYS       CONFIG_SYS_PCIE2_MEM_BUS
 294 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 295 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000      /* reuse mem LAW */
 296 #define CONFIG_SYS_PCIE2_IO_PHYS        0xe2000000
 297 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00100000      /* 1M */
 298
 299
 300 #if defined(CONFIG_PCI)
 301
 302 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 303
 304 #define CONFIG_NET_MULTI
 305 #define CONFIG_CMD_NET
 306 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 307 #define CONFIG_CMD_REGINFO
 308
 309 #define CONFIG_ULI526X
 310 #ifdef CONFIG_ULI526X
 311 #define CONFIG_ETHADDR   00:E0:0C:00:00:01
 312 #endif
 313
 314 /************************************************************
 315  * USB support
 316  ************************************************************/
 317 #define CONFIG_PCI_OHCI         1
 318 #define CONFIG_USB_OHCI_NEW             1
 319 #define CONFIG_USB_KEYBOARD     1
 320 #define CONFIG_SYS_STDIO_DEREGISTER
 321 #define CONFIG_SYS_USB_EVENT_POLL       1
 322 #define CONFIG_SYS_USB_OHCI_SLOT_NAME   "ohci_pci"
 323 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
 324 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1
 325
 326 #if !defined(CONFIG_PCI_PNP)
 327 #define PCI_ENET0_IOADDR        0xe0000000
 328 #define PCI_ENET0_MEMADDR       0xe0000000
 329 #define PCI_IDSEL_NUMBER        0x0c    /* slot0->3(IDSEL)=12->15 */
 330 #endif
 331
 332 #define CONFIG_DOS_PARTITION
 333 #define CONFIG_SCSI_AHCI
 334
 335 #ifdef CONFIG_SCSI_AHCI
 336 #define CONFIG_SATA_ULI5288
 337 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     4
 338 #define CONFIG_SYS_SCSI_MAX_LUN 1
 339 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
 340 #define CONFIG_SYS_SCSI_MAXDEVICE       CONFIG_SYS_SCSI_MAX_DEVICE
 341 #endif
 342
 343 #endif  /* CONFIG_PCI */
 344
 345 /*
 346  * BAT0         2G      Cacheable, non-guarded
 347  * 0x0000_0000  2G      DDR
 348  */
 349 #define CONFIG_SYS_DBAT0L       (BATL_PP_RW | BATL_MEMCOHERENCE)
 350 #define CONFIG_SYS_DBAT0U       (BATU_BL_2G | BATU_VS | BATU_VP)
 351 #define CONFIG_SYS_IBAT0L       (BATL_PP_RW | BATL_MEMCOHERENCE )
 352 #define CONFIG_SYS_IBAT0U       CONFIG_SYS_DBAT0U
 353
 354 /*
 355  * BAT1         1G      Cache-inhibited, guarded
 356  * 0x8000_0000  256M    PCI-1 Memory
 357  * 0xa000_0000  256M    PCI-Express 1 Memory
 358  * 0x9000_0000  256M    PCI-Express 2 Memory
 359  */
 360
 361 #define CONFIG_SYS_DBAT1L       (CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
 362                         | BATL_GUARDEDSTORAGE)
 363 #define CONFIG_SYS_DBAT1U       (CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_1G | BATU_VS | BATU_VP)
 364 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 365 #define CONFIG_SYS_IBAT1U       CONFIG_SYS_DBAT1U
 366
 367 /*
 368  * BAT2         16M     Cache-inhibited, guarded
 369  * 0xe100_0000  1M      PCI-1 I/O
 370  */
 371
 372 #define CONFIG_SYS_DBAT2L       (CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
 373                         | BATL_GUARDEDSTORAGE)
 374 #define CONFIG_SYS_DBAT2U       (CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_16M | BATU_VS | BATU_VP)
 375 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 376 #define CONFIG_SYS_IBAT2U       CONFIG_SYS_DBAT2U
 377
 378 /*
 379  * BAT3         4M      Cache-inhibited, guarded
 380  * 0xe000_0000  4M      CCSR
 381  */
 382
 383 #define CONFIG_SYS_DBAT3L       (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT \
 384                         | BATL_GUARDEDSTORAGE)
 385 #define CONFIG_SYS_DBAT3U       (CONFIG_SYS_CCSRBAR | BATU_BL_1M | BATU_VS | BATU_VP)
 386 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
 387 #define CONFIG_SYS_IBAT3U       CONFIG_SYS_DBAT3U
 388
 389 #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
 390 #define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
 391                                        | BATL_PP_RW | BATL_CACHEINHIBIT \
 392                                        | BATL_GUARDEDSTORAGE)
 393 #define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \
 394                                        | BATU_BL_1M | BATU_VS | BATU_VP)
 395 #define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
 396                                        | BATL_PP_RW | BATL_CACHEINHIBIT)
 397 #define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU
 398 #endif
 399
 400 /*
 401  * BAT4         32M     Cache-inhibited, guarded
 402  * 0xe200_0000  1M      PCI-Express 2 I/O
 403  * 0xe300_0000  1M      PCI-Express 1 I/O
 404  */
 405
 406 #define CONFIG_SYS_DBAT4L       (CONFIG_SYS_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
 407                         | BATL_GUARDEDSTORAGE)
 408 #define CONFIG_SYS_DBAT4U       (CONFIG_SYS_PCIE2_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP)
 409 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 410 #define CONFIG_SYS_IBAT4U       CONFIG_SYS_DBAT4U
 411
 412
 413 /*
 414  * BAT5         128K    Cacheable, non-guarded
 415  * 0xe400_0000  128K    Init RAM for stack in the CPU DCache (no backing memory)
 416  */
 417 #define CONFIG_SYS_DBAT5L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
 418 #define CONFIG_SYS_DBAT5U       (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 419 #define CONFIG_SYS_IBAT5L       CONFIG_SYS_DBAT5L
 420 #define CONFIG_SYS_IBAT5U       CONFIG_SYS_DBAT5U
 421
 422 /*
 423  * BAT6         256M    Cache-inhibited, guarded
 424  * 0xf000_0000  256M    FLASH
 425  */
 426 #define CONFIG_SYS_DBAT6L       (CONFIG_SYS_FLASH_BASE   | BATL_PP_RW | BATL_CACHEINHIBIT \
 427                         | BATL_GUARDEDSTORAGE)
 428 #define CONFIG_SYS_DBAT6U       (CONFIG_SYS_FLASH_BASE   | BATU_BL_256M | BATU_VS | BATU_VP)
 429 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | BATL_MEMCOHERENCE)
 430 #define CONFIG_SYS_IBAT6U       CONFIG_SYS_DBAT6U
 431
 432 /* Map the last 1M of flash where we're running from reset */
 433 #define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
 434                                  | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 435 #define CONFIG_SYS_DBAT6U_EARLY (TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
 436 #define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
 437                                  | BATL_MEMCOHERENCE)
 438 #define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY
 439
 440 /*
 441  * BAT7         4M      Cache-inhibited, guarded
 442  * 0xe800_0000  4M      PIXIS
 443  */
 444 #define CONFIG_SYS_DBAT7L       (PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT \
 445                         | BATL_GUARDEDSTORAGE)
 446 #define CONFIG_SYS_DBAT7U       (PIXIS_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
 447 #define CONFIG_SYS_IBAT7L       (PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
 448 #define CONFIG_SYS_IBAT7U       CONFIG_SYS_DBAT7U
 449
 450
 451 /*
 452  * Environment
 453  */
 454 #ifndef CONFIG_SYS_RAMBOOT
 455 #define CONFIG_ENV_IS_IN_FLASH  1
 456 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 457 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 126k (one sector) for env */
 458 #define CONFIG_ENV_SIZE         0x2000
 459 #else
 460 #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 461 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 462 #define CONFIG_ENV_SIZE         0x2000
 463 #endif
 464
 465 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 466 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 467
 468
 469 /*
 470  * BOOTP options
 471  */
 472 #define CONFIG_BOOTP_BOOTFILESIZE
 473 #define CONFIG_BOOTP_BOOTPATH
 474 #define CONFIG_BOOTP_GATEWAY
 475 #define CONFIG_BOOTP_HOSTNAME
 476
 477
 478 /*
 479  * Command line configuration.
 480  */
 481 #include <config_cmd_default.h>
 482
 483 #define CONFIG_CMD_PING
 484 #define CONFIG_CMD_I2C
 485 #define CONFIG_CMD_MII
 486
 487 #if defined(CONFIG_SYS_RAMBOOT)
 488 #undef CONFIG_CMD_SAVEENV
 489 #endif
 490
 491 #if defined(CONFIG_PCI)
 492 #define CONFIG_CMD_PCI
 493 #define CONFIG_CMD_SCSI
 494 #define CONFIG_CMD_EXT2
 495 #define CONFIG_CMD_USB
 496 #endif
 497
 498
 499 #define CONFIG_WATCHDOG                 /* watchdog enabled */
 500 #define CONFIG_SYS_WATCHDOG_FREQ        5000    /* Feed interval, 5s */
 501
 502 /*DIU Configuration*/
 503 #define DIU_CONNECT_TO_DVI              /* DIU controller connects to DVI encoder*/
 504
 505 /*
 506  * Miscellaneous configurable options
 507  */
 508 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 509 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
 510 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 511 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 512
 513 #if defined(CONFIG_CMD_KGDB)
 514 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 515 #else
 516 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 517 #endif
 518
 519 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 520 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 521 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 522 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 523
 524 /*
 525  * For booting Linux, the board info and command line data
 526  * have to be in the first 8 MB of memory, since this is
 527  * the maximum mapped by the Linux kernel during initialization.
 528  */
 529 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20)       /* Initial Memory map for Linux*/
 530
 531 /*
 532  * Internal Definitions
 533  *
 534  * Boot Flags
 535  */
 536 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH */
 537 #define BOOTFLAG_WARM   0x02            /* Software reboot */
 538
 539 #if defined(CONFIG_CMD_KGDB)
 540 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 541 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 542 #endif
 543
 544 /*
 545  * Environment Configuration
 546  */
 547 #define CONFIG_IPADDR           192.168.1.100
 548
 549 #define CONFIG_HOSTNAME         unknown
 550 #define CONFIG_ROOTPATH         /opt/nfsroot
 551 #define CONFIG_BOOTFILE         uImage
 552 #define CONFIG_UBOOTPATH        8610hpcd/u-boot.bin
 553
 554 #define CONFIG_SERVERIP         192.168.1.1
 555 #define CONFIG_GATEWAYIP        192.168.1.1
 556 #define CONFIG_NETMASK          255.255.255.0
 557
 558 /* default location for tftp and bootm */
 559 #define CONFIG_LOADADDR         1000000
 560
 561 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 562 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 563
 564 #define CONFIG_BAUDRATE 115200
 565
 566 #if defined(CONFIG_PCI1)
 567 #define PCI_ENV \
 568  "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
 569         "echo e;md ${a}e00 9\0" \
 570  "pci1regs=setenv a e0008; run pcireg\0" \
 571  "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
 572         "pci d.w $b.0 56 1\0" \
 573  "pcierrc=mw ${a}e00 ffffffff; pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff;" \
 574         "pci w.w $b.0 56 ffff\0"        \
 575  "pci1err=setenv a e0008; run pcierr\0" \
 576  "pci1errc=setenv a e0008; run pcierrc\0"
 577 #else
 578 #define PCI_ENV ""
 579 #endif
 580
 581 #if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2)
 582 #define PCIE_ENV \
 583  "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
 584         "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
 585  "pcie1regs=setenv a e000a; run pciereg\0"      \
 586  "pcie2regs=setenv a e0009; run pciereg\0"      \
 587  "pcieerr=md ${a}020 1; md ${a}e00; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;"\
 588         "pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;"        \
 589         "pci d $b.0 130 1\0" \
 590  "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;"\
 591         "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;" \
 592         "pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0"            \
 593  "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0"       \
 594  "pcie1err=setenv a e000a; run pcieerr\0"       \
 595  "pcie2err=setenv a e0009; run pcieerr\0"       \
 596  "pcie1errc=setenv a e000a; run pcieerrc\0"     \
 597  "pcie2errc=setenv a e0009; run pcieerrc\0"
 598 #else
 599 #define PCIE_ENV ""
 600 #endif
 601
 602 #define DMA_ENV \
 603  "dma0=mw ${d}104 ffffffff;mw ${d}110 50000;mw ${d}114 $sad0;mw ${d}118 50000;"\
 604         "mw ${d}120 $bc0;mw ${d}100 f03c404; mw ${d}11c $dad0; md ${d}100 9\0" \
 605  "dma1=mw ${d}184 ffffffff;mw ${d}190 50000;mw ${d}194 $sad1;mw ${d}198 50000;"\
 606         "mw ${d}1a0 $bc1;mw ${d}180 f03c404; mw ${d}19c $dad1; md ${d}180 9\0" \
 607  "dma2=mw ${d}204 ffffffff;mw ${d}210 50000;mw ${d}214 $sad2;mw ${d}218 50000;"\
 608         "mw ${d}220 $bc2;mw ${d}200 f03c404; mw ${d}21c $dad2; md ${d}200 9\0" \
 609  "dma3=mw ${d}284 ffffffff;mw ${d}290 50000;mw ${d}294 $sad3;mw ${d}298 50000;"\
 610         "mw ${d}2a0 $bc3;mw ${d}280 f03c404; mw ${d}29c $dad3; md ${d}280 9\0"
 611
 612 #ifdef ENV_DEBUG
 613 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 614  "netdev=eth0\0"                                                \
 615  "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                         \
 616  "tftpflash=tftpboot $loadaddr $uboot; "                        \
 617         "protect off " MK_STR(TEXT_BASE) " +$filesize; "        \
 618         "erase " MK_STR(TEXT_BASE) " +$filesize; "              \
 619         "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "      \
 620         "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
 621         "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"     \
 622  "consoledev=ttyS0\0"                                           \
 623  "ramdiskaddr=2000000\0"                                        \
 624  "ramdiskfile=8610hpcd/ramdisk.uboot\0"                         \
 625  "fdtaddr=c00000\0"                                             \
 626  "fdtfile=8610hpcd/mpc8610_hpcd.dtb\0"                          \
 627  "bdev=sda3\0"                                  \
 628  "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
 629  "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
 630  "maxcpus=1"    \
 631  "eoi=mw e00400b0 0\0"                                          \
 632  "iack=md e00400a0 1\0"                                         \
 633  "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4;" \
 634         "md ${a}bf0 4; md ${a}e00 3; md ${a}e20 3; md ${a}e40 7;" \
 635         "md ${a}f00 5\0" \
 636  "ddr1regs=setenv a e0002; run ddrreg\0" \
 637  "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}800 1;" \
 638         "md ${a}900 6; md ${a}a00 1; md ${a}b20 3; md ${a}e00 1;" \
 639         "md ${a}e60 1; md ${a}ef0 1d\0" \
 640  "guregs=setenv a e00e0; run gureg\0" \
 641  "mcmreg=md ${a}000 1b; md ${a}bf8 2; md ${a}e00 5\0" \
 642  "mcmregs=setenv a e0001; run mcmreg\0" \
 643  "diuregs=md e002c000 1d\0" \
 644  "dium=mw e002c01c\0" \
 645  "diuerr=md e002c014 1\0" \
 646  "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0 debug\0" \
 647  "monitor=0-DVI\0" \
 648  "pmregs=md e00e1000 2b\0" \
 649  "lawregs=md e0000c08 4b\0" \
 650  "lbcregs=md e0005000 36\0" \
 651  "dma0regs=md e0021100 12\0" \
 652  "dma1regs=md e0021180 12\0" \
 653  "dma2regs=md e0021200 12\0" \
 654  "dma3regs=md e0021280 12\0" \
 655  PCI_ENV \
 656  PCIE_ENV \
 657  DMA_ENV
 658 #else
 659 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 660  "netdev=eth0\0"                                                \
 661  "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                         \
 662  "consoledev=ttyS0\0"                                           \
 663  "ramdiskaddr=2000000\0"                                        \
 664  "ramdiskfile=8610hpcd/ramdisk.uboot\0"                         \
 665  "fdtaddr=c00000\0"                                             \
 666  "fdtfile=8610hpcd/mpc8610_hpcd.dtb\0"                          \
 667  "bdev=sda3\0"                                                  \
 668  "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0\0"\
 669  "monitor=0-DVI\0"
 670 #endif
 671
 672 #define CONFIG_NFSBOOTCOMMAND                                   \
 673  "setenv bootargs root=/dev/nfs rw "                            \
 674         "nfsroot=$serverip:$rootpath "                          \
 675         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 676         "console=$consoledev,$baudrate $othbootargs;"           \
 677  "tftp $loadaddr $bootfile;"                                    \
 678  "tftp $fdtaddr $fdtfile;"                                      \
 679  "bootm $loadaddr - $fdtaddr"
 680
 681 #define CONFIG_RAMBOOTCOMMAND \
 682  "setenv bootargs root=/dev/ram rw "                            \
 683         "console=$consoledev,$baudrate $othbootargs;"           \
 684  "tftp $ramdiskaddr $ramdiskfile;"                              \
 685  "tftp $loadaddr $bootfile;"                                    \
 686  "tftp $fdtaddr $fdtfile;"                                      \
 687  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 688
 689 #define CONFIG_BOOTCOMMAND              \
 690  "setenv bootargs root=/dev/$bdev rw "  \
 691         "console=$consoledev,$baudrate $othbootargs;"   \
 692  "tftp $loadaddr $bootfile;"            \
 693  "tftp $fdtaddr $fdtfile;"              \
 694  "bootm $loadaddr - $fdtaddr"
 695
 696 #endif  /* __CONFIG_H */