include/configs/P1010RDB.h

   1 /*
   2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * P010 RDB board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #ifdef CONFIG_36BIT
  15 #define CONFIG_PHYS_64BIT
  16 #endif
  17
  18 #define CONFIG_P1010
  19 #define CONFIG_E500                     /* BOOKE e500 family */
  20 #include <asm/config_mpc85xx.h>
  21 #define CONFIG_NAND_FSL_IFC
  22
  23 #ifdef CONFIG_SDCARD
  24 #define CONFIG_SPL
  25 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  26 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  27 #define CONFIG_SPL_ENV_SUPPORT
  28 #define CONFIG_SPL_SERIAL_SUPPORT
  29 #define CONFIG_SPL_MMC_SUPPORT
  30 #define CONFIG_SPL_MMC_MINIMAL
  31 #define CONFIG_SPL_FLUSH_IMAGE
  32 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  33 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  34 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  35 #define CONFIG_SPL_I2C_SUPPORT
  36 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  37 #define CONFIG_SYS_TEXT_BASE            0x11001000
  38 #define CONFIG_SPL_TEXT_BASE            0xD0001000
  39 #define CONFIG_SPL_PAD_TO               0x18000
  40 #define CONFIG_SPL_MAX_SIZE             (96 * 1024)
  41 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (512 << 10)
  42 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
  43 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
  44 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (96 << 10)
  45 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  46 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  47 #define CONFIG_SPL_MMC_BOOT
  48 #ifdef CONFIG_SPL_BUILD
  49 #define CONFIG_SPL_COMMON_INIT_DDR
  50 #endif
  51 #endif
  52
  53 #ifdef CONFIG_SPIFLASH
  54 #ifdef CONFIG_SECURE_BOOT
  55 #define CONFIG_RAMBOOT_SPIFLASH
  56 #define CONFIG_SYS_TEXT_BASE            0x11000000
  57 #define CONFIG_RESET_VECTOR_ADDRESS     0x1107fffc
  58 #else
  59 #define CONFIG_SPL
  60 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  61 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  62 #define CONFIG_SPL_ENV_SUPPORT
  63 #define CONFIG_SPL_SERIAL_SUPPORT
  64 #define CONFIG_SPL_SPI_SUPPORT
  65 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  66 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  67 #define CONFIG_SPL_FLUSH_IMAGE
  68 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  69 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  70 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  71 #define CONFIG_SPL_I2C_SUPPORT
  72 #define CONFIG_FSL_LAW         /* Use common FSL init code */
  73 #define CONFIG_SYS_TEXT_BASE                    0x11001000
  74 #define CONFIG_SPL_TEXT_BASE                    0xD0001000
  75 #define CONFIG_SPL_PAD_TO                       0x18000
  76 #define CONFIG_SPL_MAX_SIZE                     (96 * 1024)
  77 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (512 << 10)
  78 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
  79 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
  80 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (96 << 10)
  81 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  82 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  83 #define CONFIG_SPL_SPI_BOOT
  84 #ifdef CONFIG_SPL_BUILD
  85 #define CONFIG_SPL_COMMON_INIT_DDR
  86 #endif
  87 #endif
  88 #endif
  89
  90 #ifdef CONFIG_NAND
  91 #define CONFIG_SPL
  92 #ifdef CONFIG_SECURE_BOOT
  93 #define CONFIG_SPL_INIT_MINIMAL
  94 #define CONFIG_SPL_SERIAL_SUPPORT
  95 #define CONFIG_SPL_NAND_SUPPORT
  96 #define CONFIG_SPL_NAND_BOOT
  97 #define CONFIG_SPL_FLUSH_IMAGE
  98 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  99
 100 #define CONFIG_SYS_TEXT_BASE            0x00201000
 101 #define CONFIG_SPL_TEXT_BASE            0xFFFFE000
 102 #define CONFIG_SPL_MAX_SIZE             8192
 103 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
 104 #define CONFIG_SPL_RELOC_STACK          0x00100000
 105 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
 106 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
 107 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
 108 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
 109 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 110 #else
 111 #define CONFIG_TPL
 112 #ifdef CONFIG_TPL_BUILD
 113 #define CONFIG_SPL_NAND_BOOT
 114 #define CONFIG_SPL_FLUSH_IMAGE
 115 #define CONFIG_SPL_ENV_SUPPORT
 116 #define CONFIG_SPL_NAND_INIT
 117 #define CONFIG_SPL_SERIAL_SUPPORT
 118 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 119 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 120 #define CONFIG_SPL_I2C_SUPPORT
 121 #define CONFIG_SPL_NAND_SUPPORT
 122 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 123 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 124 #define CONFIG_SPL_COMMON_INIT_DDR
 125 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
 126 #define CONFIG_SPL_TEXT_BASE            0xD0001000
 127 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 128 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (576 << 10)
 129 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
 130 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
 131 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
 132 #elif defined(CONFIG_SPL_BUILD)
 133 #define CONFIG_SPL_INIT_MINIMAL
 134 #define CONFIG_SPL_SERIAL_SUPPORT
 135 #define CONFIG_SPL_NAND_SUPPORT
 136 #define CONFIG_SPL_NAND_MINIMAL
 137 #define CONFIG_SPL_FLUSH_IMAGE
 138 #define CONFIG_SPL_TEXT_BASE            0xff800000
 139 #define CONFIG_SPL_MAX_SIZE             8192
 140 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
 141 #define CONFIG_SYS_NAND_U_BOOT_DST      0xD0000000
 142 #define CONFIG_SYS_NAND_U_BOOT_START    0xD0000000
 143 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
 144 #endif
 145 #define CONFIG_SPL_PAD_TO       0x20000
 146 #define CONFIG_TPL_PAD_TO       0x20000
 147 #define CONFIG_SPL_TARGET       "u-boot-with-spl.bin"
 148 #define CONFIG_SYS_TEXT_BASE    0x11001000
 149 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 150 #endif
 151 #endif
 152
 153 #ifdef CONFIG_NAND_SECBOOT      /* NAND Boot */
 154 #define CONFIG_RAMBOOT_NAND
 155 #define CONFIG_SYS_TEXT_BASE            0x11000000
 156 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
 157 #endif
 158
 159 #ifndef CONFIG_SYS_TEXT_BASE
 160 #define CONFIG_SYS_TEXT_BASE            0xeff40000
 161 #endif
 162
 163 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 164 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 165 #endif
 166
 167 #ifdef CONFIG_SPL_BUILD
 168 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 169 #else
 170 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 171 #endif
 172
 173 /* High Level Configuration Options */
 174 #define CONFIG_BOOKE                    /* BOOKE */
 175 #define CONFIG_E500                     /* BOOKE e500 family */
 176 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
 177 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
 178
 179 #define CONFIG_PCI                      /* Enable PCI/PCIE */
 180 #if defined(CONFIG_PCI)
 181 #define CONFIG_PCIE1                    /* PCIE controler 1 (slot 1) */
 182 #define CONFIG_PCIE2                    /* PCIE controler 2 (slot 2) */
 183 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 184 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 185 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
 186 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 187
 188 #define CONFIG_CMD_NET
 189 #define CONFIG_CMD_PCI
 190
 191 #define CONFIG_E1000                    /*  E1000 pci Ethernet card*/
 192
 193 /*
 194  * PCI Windows
 195  * Memory space is mapped 1-1, but I/O space must start from 0.
 196  */
 197 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 198 #define CONFIG_SYS_PCIE1_NAME           "mini PCIe Slot"
 199 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 200 #ifdef CONFIG_PHYS_64BIT
 201 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 202 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 203 #else
 204 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 205 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 206 #endif
 207 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 208 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 209 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 210 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 211 #ifdef CONFIG_PHYS_64BIT
 212 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
 213 #else
 214 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 215 #endif
 216
 217 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 218 #if defined(CONFIG_P1010RDB_PA)
 219 #define CONFIG_SYS_PCIE2_NAME           "PCIe Slot"
 220 #elif defined(CONFIG_P1010RDB_PB)
 221 #define CONFIG_SYS_PCIE2_NAME           "mini PCIe Slot"
 222 #endif
 223 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 224 #ifdef CONFIG_PHYS_64BIT
 225 #define CONFIG_SYS_PCIE2_MEM_BUS        0xc0000000
 226 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 227 #else
 228 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 229 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 230 #endif
 231 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 232 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 233 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 234 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 235 #ifdef CONFIG_PHYS_64BIT
 236 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 237 #else
 238 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 239 #endif
 240
 241 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 242
 243 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 244 #define CONFIG_DOS_PARTITION
 245 #endif
 246
 247 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 248 #define CONFIG_TSEC_ENET
 249 #define CONFIG_ENV_OVERWRITE
 250
 251 #define CONFIG_DDR_CLK_FREQ     66666666 /* DDRCLK on P1010 RDB */
 252 #define CONFIG_SYS_CLK_FREQ     66666666 /* SYSCLK for P1010 RDB */
 253
 254 #define CONFIG_MISC_INIT_R
 255 #define CONFIG_HWCONFIG
 256 /*
 257  * These can be toggled for performance analysis, otherwise use default.
 258  */
 259 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 260 #define CONFIG_BTB                      /* toggle branch predition */
 261
 262 #define CONFIG_ADDR_STREAMING           /* toggle addr streaming */
 263
 264 #define CONFIG_ENABLE_36BIT_PHYS
 265
 266 #ifdef CONFIG_PHYS_64BIT
 267 #define CONFIG_ADDR_MAP                 1
 268 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 269 #endif
 270
 271 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 272 #define CONFIG_SYS_MEMTEST_END          0x1fffffff
 273 #define CONFIG_PANIC_HANG               /* do not reset board on panic */
 274
 275 /* DDR Setup */
 276 #define CONFIG_SYS_FSL_DDR3
 277 #define CONFIG_SYS_DDR_RAW_TIMING
 278 #define CONFIG_DDR_SPD
 279 #define CONFIG_SYS_SPD_BUS_NUM          1
 280 #define SPD_EEPROM_ADDRESS              0x52
 281
 282 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 283
 284 #ifndef __ASSEMBLY__
 285 extern unsigned long get_sdram_size(void);
 286 #endif
 287 #define CONFIG_SYS_SDRAM_SIZE           get_sdram_size() /* DDR size */
 288 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 289 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 290
 291 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 292 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 293
 294 /* DDR3 Controller Settings */
 295 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 296 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 297 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 298 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 299 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 300 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 301 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 302 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 303 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 304 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 305 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 306 #define CONFIG_SYS_DDR_CONTROL          0xc70c0008      /* Type = DDR3  */
 307 #define CONFIG_SYS_DDR_CONTROL_2        0x24401000
 308 #define CONFIG_SYS_DDR_TIMING_4         0x00000001
 309 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 310
 311 #define CONFIG_SYS_DDR_TIMING_3_800     0x00030000
 312 #define CONFIG_SYS_DDR_TIMING_0_800     0x00110104
 313 #define CONFIG_SYS_DDR_TIMING_1_800     0x6f6b8644
 314 #define CONFIG_SYS_DDR_TIMING_2_800     0x0FA888CF
 315 #define CONFIG_SYS_DDR_CLK_CTRL_800     0x03000000
 316 #define CONFIG_SYS_DDR_MODE_1_800       0x00441420
 317 #define CONFIG_SYS_DDR_MODE_2_800       0x00000000
 318 #define CONFIG_SYS_DDR_INTERVAL_800     0x0C300100
 319 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
 320
 321 /* settings for DDR3 at 667MT/s */
 322 #define CONFIG_SYS_DDR_TIMING_3_667             0x00010000
 323 #define CONFIG_SYS_DDR_TIMING_0_667             0x00110004
 324 #define CONFIG_SYS_DDR_TIMING_1_667             0x5d59e544
 325 #define CONFIG_SYS_DDR_TIMING_2_667             0x0FA890CD
 326 #define CONFIG_SYS_DDR_CLK_CTRL_667             0x03000000
 327 #define CONFIG_SYS_DDR_MODE_1_667               0x00441210
 328 #define CONFIG_SYS_DDR_MODE_2_667               0x00000000
 329 #define CONFIG_SYS_DDR_INTERVAL_667             0x0a280000
 330 #define CONFIG_SYS_DDR_WRLVL_CONTROL_667        0x8675F608
 331
 332 #define CONFIG_SYS_CCSRBAR                      0xffe00000
 333 #define CONFIG_SYS_CCSRBAR_PHYS_LOW             CONFIG_SYS_CCSRBAR
 334
 335 /* Don't relocate CCSRBAR while in NAND_SPL */
 336 #ifdef CONFIG_SPL_BUILD
 337 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 338 #endif
 339
 340 /*
 341  * Memory map
 342  *
 343  * 0x0000_0000  0x3fff_ffff     DDR                     1G cacheable
 344  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1.5G non-cacheable
 345  * 0xffc0_0000  0xffc3_ffff     PCI IO range            256k non-cacheable
 346  *
 347  * Localbus non-cacheable
 348  * 0xff80_0000  0xff8f_ffff     NAND Flash              1M non-cacheable
 349  * 0xffb0_0000  0xffbf_ffff     Board CPLD              1M non-cacheable
 350  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 351  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 352  */
 353
 354 /*
 355  * IFC Definitions
 356  */
 357 /* NOR Flash on IFC */
 358 #ifdef CONFIG_SPL_BUILD
 359 #define CONFIG_SYS_NO_FLASH
 360 #endif
 361
 362 #define CONFIG_SYS_FLASH_BASE           0xee000000
 363 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* 32M */
 364
 365 #ifdef CONFIG_PHYS_64BIT
 366 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 367 #else
 368 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 369 #endif
 370
 371 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 372                                 CSPR_PORT_SIZE_16 | \
 373                                 CSPR_MSEL_NOR | \
 374                                 CSPR_V)
 375 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(32*1024*1024)
 376 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(7)
 377 /* NOR Flash Timing Params */
 378 #define CONFIG_SYS_NOR_FTIM0    FTIM0_NOR_TACSE(0x4) | \
 379                                 FTIM0_NOR_TEADC(0x5) | \
 380                                 FTIM0_NOR_TEAHC(0x5)
 381 #define CONFIG_SYS_NOR_FTIM1    FTIM1_NOR_TACO(0x1e) | \
 382                                 FTIM1_NOR_TRAD_NOR(0x0f)
 383 #define CONFIG_SYS_NOR_FTIM2    FTIM2_NOR_TCS(0x4) | \
 384                                 FTIM2_NOR_TCH(0x4) | \
 385                                 FTIM2_NOR_TWP(0x1c)
 386 #define CONFIG_SYS_NOR_FTIM3    0x0
 387
 388 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 389 #define CONFIG_SYS_FLASH_QUIET_TEST
 390 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 391 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 392
 393 #undef CONFIG_SYS_FLASH_CHECKSUM
 394 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 395 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 396
 397 /* CFI for NOR Flash */
 398 #define CONFIG_FLASH_CFI_DRIVER
 399 #define CONFIG_SYS_FLASH_CFI
 400 #define CONFIG_SYS_FLASH_EMPTY_INFO
 401 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 402
 403 /* NAND Flash on IFC */
 404 #define CONFIG_SYS_NAND_BASE            0xff800000
 405 #ifdef CONFIG_PHYS_64BIT
 406 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 407 #else
 408 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 409 #endif
 410
 411 #define CONFIG_MTD_DEVICE
 412 #define CONFIG_MTD_PARTITION
 413 #define CONFIG_CMD_MTDPARTS
 414 #define MTDIDS_DEFAULT                  "nand0=ff800000.flash"
 415 #define MTDPARTS_DEFAULT                \
 416         "mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
 417
 418 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 419                                 | CSPR_PORT_SIZE_8      \
 420                                 | CSPR_MSEL_NAND        \
 421                                 | CSPR_V)
 422 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 423
 424 #if defined(CONFIG_P1010RDB_PA)
 425 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 426                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 427                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 428                                 | CSOR_NAND_RAL_2       /* RAL = 2 Bytes */ \
 429                                 | CSOR_NAND_PGS_512     /* Page Size = 512b */ \
 430                                 | CSOR_NAND_SPRZ_16     /* Spare size = 16 */ \
 431                                 | CSOR_NAND_PB(32))     /* 32 Pages Per Block */
 432 #define CONFIG_SYS_NAND_BLOCK_SIZE      (16 * 1024)
 433
 434 #elif defined(CONFIG_P1010RDB_PB)
 435 #define CONFIG_SYS_NAND_ONFI_DETECTION
 436 #define CONFIG_SYS_NAND_CSOR   (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 437                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 438                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 439                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 440                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 441                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 442                                 | CSOR_NAND_PB(128))  /*Pages Per Block = 128 */
 443 #define CONFIG_SYS_NAND_BLOCK_SIZE     (512 * 1024)
 444 #endif
 445
 446 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 447 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 448 #define CONFIG_MTD_NAND_VERIFY_WRITE
 449 #define CONFIG_CMD_NAND
 450
 451 #if defined(CONFIG_P1010RDB_PA)
 452 /* NAND Flash Timing Params */
 453 #define CONFIG_SYS_NAND_FTIM0           FTIM0_NAND_TCCST(0x01) | \
 454                                         FTIM0_NAND_TWP(0x0C)   | \
 455                                         FTIM0_NAND_TWCHT(0x04) | \
 456                                         FTIM0_NAND_TWH(0x05)
 457 #define CONFIG_SYS_NAND_FTIM1           FTIM1_NAND_TADLE(0x1d) | \
 458                                         FTIM1_NAND_TWBE(0x1d)  | \
 459                                         FTIM1_NAND_TRR(0x07)   | \
 460                                         FTIM1_NAND_TRP(0x0c)
 461 #define CONFIG_SYS_NAND_FTIM2           FTIM2_NAND_TRAD(0x0c) | \
 462                                         FTIM2_NAND_TREH(0x05) | \
 463                                         FTIM2_NAND_TWHRE(0x0f)
 464 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 465
 466 #elif defined(CONFIG_P1010RDB_PB)
 467 /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
 468 /* ONFI NAND Flash mode0 Timing Params */
 469 #define CONFIG_SYS_NAND_FTIM0  (FTIM0_NAND_TCCST(0x07)| \
 470                                         FTIM0_NAND_TWP(0x18)   | \
 471                                         FTIM0_NAND_TWCHT(0x07) | \
 472                                         FTIM0_NAND_TWH(0x0a))
 473 #define CONFIG_SYS_NAND_FTIM1  (FTIM1_NAND_TADLE(0x32)| \
 474                                         FTIM1_NAND_TWBE(0x39)  | \
 475                                         FTIM1_NAND_TRR(0x0e)   | \
 476                                         FTIM1_NAND_TRP(0x18))
 477 #define CONFIG_SYS_NAND_FTIM2  (FTIM2_NAND_TRAD(0x0f) | \
 478                                         FTIM2_NAND_TREH(0x0a)  | \
 479                                         FTIM2_NAND_TWHRE(0x1e))
 480 #define CONFIG_SYS_NAND_FTIM3   0x0
 481 #endif
 482
 483 #define CONFIG_SYS_NAND_DDR_LAW         11
 484
 485 /* Set up IFC registers for boot location NOR/NAND */
 486 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 487 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 488 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 489 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 490 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 491 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 492 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 493 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 494 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 495 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 496 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 497 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 498 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 499 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 500 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 501 #else
 502 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 503 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 504 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 505 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 506 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 507 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 508 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 509 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 510 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 511 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 512 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 513 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 514 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 515 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 516 #endif
 517
 518 /* CPLD on IFC */
 519 #define CONFIG_SYS_CPLD_BASE            0xffb00000
 520
 521 #ifdef CONFIG_PHYS_64BIT
 522 #define CONFIG_SYS_CPLD_BASE_PHYS       0xfffb00000ull
 523 #else
 524 #define CONFIG_SYS_CPLD_BASE_PHYS       CONFIG_SYS_CPLD_BASE
 525 #endif
 526
 527 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 528                                 | CSPR_PORT_SIZE_8 \
 529                                 | CSPR_MSEL_GPCM \
 530                                 | CSPR_V)
 531 #define CONFIG_SYS_AMASK3               IFC_AMASK(64*1024)
 532 #define CONFIG_SYS_CSOR3                0x0
 533 /* CPLD Timing parameters for IFC CS3 */
 534 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 535                                         FTIM0_GPCM_TEADC(0x0e) | \
 536                                         FTIM0_GPCM_TEAHC(0x0e))
 537 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 538                                         FTIM1_GPCM_TRAD(0x1f))
 539 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 540                                         FTIM2_GPCM_TCH(0x8) | \
 541                                         FTIM2_GPCM_TWP(0x1f))
 542 #define CONFIG_SYS_CS3_FTIM3            0x0
 543
 544 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
 545         defined(CONFIG_RAMBOOT_NAND)
 546 #define CONFIG_SYS_RAMBOOT
 547 #define CONFIG_SYS_EXTRA_ENV_RELOC
 548 #else
 549 #undef CONFIG_SYS_RAMBOOT
 550 #endif
 551
 552 #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
 553 #if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT)
 554 #define CONFIG_A003399_NOR_WORKAROUND
 555 #endif
 556 #endif
 557
 558 #define CONFIG_BOARD_EARLY_INIT_F       /* Call board_pre_init */
 559 #define CONFIG_BOARD_EARLY_INIT_R
 560
 561 #define CONFIG_SYS_INIT_RAM_LOCK
 562 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 563 #define CONFIG_SYS_INIT_RAM_END         0x00004000 /* End of used area in RAM */
 564
 565 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END \
 566                                                 - GENERATED_GBL_DATA_SIZE)
 567 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 568
 569 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 570 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 571
 572 /*
 573  * Config the L2 Cache as L2 SRAM
 574  */
 575 #if defined(CONFIG_SPL_BUILD)
 576 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 577 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 578 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 579 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 580 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 581 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 582 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 583 #define CONFIG_SPL_RELOC_STACK_SIZE     (16 << 10)
 584 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
 585 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (128 << 10)
 586 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024)
 587 #elif defined(CONFIG_NAND)
 588 #ifdef CONFIG_TPL_BUILD
 589 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 590 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 591 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 592 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 593 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 594 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 595 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 596 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 597 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 598 #else
 599 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 600 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 601 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 602 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 603 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x3000)
 604 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 605 #endif
 606 #endif
 607 #endif
 608
 609 /* Serial Port */
 610 #define CONFIG_CONS_INDEX       1
 611 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 612 #define CONFIG_SYS_NS16550
 613 #define CONFIG_SYS_NS16550_SERIAL
 614 #define CONFIG_SYS_NS16550_REG_SIZE     1
 615 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 616 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 617 #define CONFIG_NS16550_MIN_FUNCTIONS
 618 #endif
 619
 620 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 621
 622 #define CONFIG_SYS_BAUDRATE_TABLE       \
 623         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 624
 625 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 626 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 627
 628 /* Use the HUSH parser */
 629 #define CONFIG_SYS_HUSH_PARSER
 630
 631 /*
 632  * Pass open firmware flat tree
 633  */
 634 #define CONFIG_OF_LIBFDT
 635 #define CONFIG_OF_BOARD_SETUP
 636 #define CONFIG_OF_STDOUT_VIA_ALIAS
 637
 638 /* new uImage format support */
 639 #define CONFIG_FIT
 640 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 641
 642 /* I2C */
 643 #define CONFIG_SYS_I2C
 644 #define CONFIG_SYS_I2C_FSL
 645 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 646 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 647 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 648 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 649 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 650 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 651 #define I2C_PCA9557_ADDR1               0x18
 652 #define I2C_PCA9557_ADDR2               0x19
 653 #define I2C_PCA9557_BUS_NUM             0
 654
 655 /* I2C EEPROM */
 656 #if defined(CONFIG_P1010RDB_PB)
 657 #define CONFIG_ID_EEPROM
 658 #ifdef CONFIG_ID_EEPROM
 659 #define CONFIG_SYS_I2C_EEPROM_NXID
 660 #endif
 661 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 662 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 663 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 664 #define MAX_NUM_PORTS                   9 /* for 128Bytes EEPROM */
 665 #endif
 666 /* enable read and write access to EEPROM */
 667 #define CONFIG_CMD_EEPROM
 668 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 669 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 670 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 671 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 672
 673 /* RTC */
 674 #define CONFIG_RTC_PT7C4338
 675 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 676
 677 #define CONFIG_CMD_I2C
 678
 679 /*
 680  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 681  * used for SLIC
 682  */
 683 #if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT)
 684 /* eSPI - Enhanced SPI */
 685 #define CONFIG_FSL_ESPI
 686 #define CONFIG_SPI_FLASH
 687 #define CONFIG_SPI_FLASH_SPANSION
 688 #define CONFIG_CMD_SF
 689 #define CONFIG_SF_DEFAULT_SPEED         10000000
 690 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 691 #endif
 692
 693 #if defined(CONFIG_TSEC_ENET)
 694 #define CONFIG_MII                      /* MII PHY management */
 695 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 696 #define CONFIG_TSEC1    1
 697 #define CONFIG_TSEC1_NAME       "eTSEC1"
 698 #define CONFIG_TSEC2    1
 699 #define CONFIG_TSEC2_NAME       "eTSEC2"
 700 #define CONFIG_TSEC3    1
 701 #define CONFIG_TSEC3_NAME       "eTSEC3"
 702
 703 #define TSEC1_PHY_ADDR          1
 704 #define TSEC2_PHY_ADDR          0
 705 #define TSEC3_PHY_ADDR          2
 706
 707 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 708 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 709 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 710
 711 #define TSEC1_PHYIDX            0
 712 #define TSEC2_PHYIDX            0
 713 #define TSEC3_PHYIDX            0
 714
 715 #define CONFIG_ETHPRIME         "eTSEC1"
 716
 717 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 718
 719 /* TBI PHY configuration for SGMII mode */
 720 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 721                 TBICR_PHY_RESET \
 722                 | TBICR_ANEG_ENABLE \
 723                 | TBICR_FULL_DUPLEX \
 724                 | TBICR_SPEED1_SET \
 725                 )
 726
 727 #endif  /* CONFIG_TSEC_ENET */
 728
 729
 730 /* SATA */
 731 #define CONFIG_FSL_SATA
 732 #define CONFIG_FSL_SATA_V2
 733 #define CONFIG_LIBATA
 734
 735 #ifdef CONFIG_FSL_SATA
 736 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 737 #define CONFIG_SATA1
 738 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 739 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 740 #define CONFIG_SATA2
 741 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 742 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 743
 744 #define CONFIG_CMD_SATA
 745 #define CONFIG_LBA48
 746 #endif /* #ifdef CONFIG_FSL_SATA  */
 747
 748 #define CONFIG_MMC
 749 #ifdef CONFIG_MMC
 750 #define CONFIG_CMD_MMC
 751 #define CONFIG_DOS_PARTITION
 752 #define CONFIG_FSL_ESDHC
 753 #define CONFIG_GENERIC_MMC
 754 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 755 #endif
 756
 757 #define CONFIG_HAS_FSL_DR_USB
 758
 759 #if defined(CONFIG_HAS_FSL_DR_USB)
 760 #define CONFIG_USB_EHCI
 761
 762 #ifdef CONFIG_USB_EHCI
 763 #define CONFIG_CMD_USB
 764 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 765 #define CONFIG_USB_EHCI_FSL
 766 #define CONFIG_USB_STORAGE
 767 #endif
 768 #endif
 769
 770 /*
 771  * Environment
 772  */
 773 #if defined(CONFIG_SDCARD)
 774 #define CONFIG_ENV_IS_IN_MMC
 775 #define CONFIG_FSL_FIXED_MMC_LOCATION
 776 #define CONFIG_SYS_MMC_ENV_DEV          0
 777 #define CONFIG_ENV_SIZE                 0x2000
 778 #elif defined(CONFIG_SPIFLASH)
 779 #define CONFIG_ENV_IS_IN_SPI_FLASH
 780 #define CONFIG_ENV_SPI_BUS      0
 781 #define CONFIG_ENV_SPI_CS       0
 782 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 783 #define CONFIG_ENV_SPI_MODE     0
 784 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 785 #define CONFIG_ENV_SECT_SIZE    0x10000
 786 #define CONFIG_ENV_SIZE         0x2000
 787 #elif defined(CONFIG_NAND)
 788 #define CONFIG_ENV_IS_IN_NAND
 789 #ifdef CONFIG_TPL_BUILD
 790 #define CONFIG_ENV_SIZE         0x2000
 791 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 792 #else
 793 #if defined(CONFIG_P1010RDB_PA)
 794 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 795 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */
 796 #elif defined(CONFIG_P1010RDB_PB)
 797 #define CONFIG_ENV_SIZE         (16 * 1024)
 798 #define CONFIG_ENV_RANGE        (32 * CONFIG_ENV_SIZE) /* new block size 512K */
 799 #endif
 800 #endif
 801 #define CONFIG_ENV_OFFSET       (1024 * 1024)
 802 #elif defined(CONFIG_SYS_RAMBOOT)
 803 #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
 804 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE - 0x1000)
 805 #define CONFIG_ENV_SIZE                 0x2000
 806 #else
 807 #define CONFIG_ENV_IS_IN_FLASH
 808 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 809 #define CONFIG_ENV_SIZE         0x2000
 810 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 811 #endif
 812
 813 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 814 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 815
 816 /*
 817  * Command line configuration.
 818  */
 819 #include <config_cmd_default.h>
 820
 821 #define CONFIG_CMD_DATE
 822 #define CONFIG_CMD_ERRATA
 823 #define CONFIG_CMD_ELF
 824 #define CONFIG_CMD_IRQ
 825 #define CONFIG_CMD_MII
 826 #define CONFIG_CMD_PING
 827 #define CONFIG_CMD_SETEXPR
 828 #define CONFIG_CMD_REGINFO
 829
 830 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 831
 832 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
 833                  || defined(CONFIG_FSL_SATA)
 834 #define CONFIG_CMD_EXT2
 835 #define CONFIG_CMD_FAT
 836 #define CONFIG_DOS_PARTITION
 837 #endif
 838
 839 /*
 840  * Miscellaneous configurable options
 841  */
 842 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 843 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 844 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 845 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 846
 847 #if defined(CONFIG_CMD_KGDB)
 848 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 849 #else
 850 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 851 #endif
 852 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 853                                                 /* Print Buffer Size */
 854 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 855 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 856
 857 /*
 858  * Internal Definitions
 859  *
 860  * Boot Flags
 861  */
 862 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH */
 863 #define BOOTFLAG_WARM   0x02            /* Software reboot */
 864
 865 /*
 866  * For booting Linux, the board info and command line data
 867  * have to be in the first 64 MB of memory, since this is
 868  * the maximum mapped by the Linux kernel during initialization.
 869  */
 870 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 871 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 872
 873 #if defined(CONFIG_CMD_KGDB)
 874 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 875 #endif
 876
 877 /*
 878  * Environment Configuration
 879  */
 880
 881 #if defined(CONFIG_TSEC_ENET)
 882 #define CONFIG_HAS_ETH0
 883 #define CONFIG_HAS_ETH1
 884 #define CONFIG_HAS_ETH2
 885 #endif
 886
 887 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 888 #define CONFIG_BOOTFILE         "uImage"
 889 #define CONFIG_UBOOTPATH        u-boot.bin/* U-Boot image on TFTP server */
 890
 891 /* default location for tftp and bootm */
 892 #define CONFIG_LOADADDR         1000000
 893
 894 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 895 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 896
 897 #define CONFIG_BAUDRATE         115200
 898
 899 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 900         "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"      \
 901         "netdev=eth0\0"                                         \
 902         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 903         "loadaddr=1000000\0"                    \
 904         "consoledev=ttyS0\0"                            \
 905         "ramdiskaddr=2000000\0"                 \
 906         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 907         "fdtaddr=c00000\0"                              \
 908         "fdtfile=p1010rdb.dtb\0"                \
 909         "bdev=sda1\0"   \
 910         "hwconfig=usb1:dr_mode=host,phy_type=utmi\0"    \
 911         "othbootargs=ramdisk_size=600000\0" \
 912         "usbfatboot=setenv bootargs root=/dev/ram rw "  \
 913         "console=$consoledev,$baudrate $othbootargs; "  \
 914         "usb start;"                    \
 915         "fatload usb 0:2 $loadaddr $bootfile;"          \
 916         "fatload usb 0:2 $fdtaddr $fdtfile;"    \
 917         "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"    \
 918         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"               \
 919         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 920         "console=$consoledev,$baudrate $othbootargs; "  \
 921         "usb start;"                    \
 922         "ext2load usb 0:4 $loadaddr $bootfile;"         \
 923         "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 924         "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 925         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 926         CONFIG_BOOTMODE
 927
 928 #if defined(CONFIG_P1010RDB_PA)
 929 #define CONFIG_BOOTMODE \
 930         "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 931         "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
 932         "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 933         "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \
 934         "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
 935         "mw.b ffb00011 0; mw.b ffb00017 1; reset\0"
 936
 937 #elif defined(CONFIG_P1010RDB_PB)
 938 #define CONFIG_BOOTMODE \
 939         "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 940         "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \
 941         "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 942         "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \
 943         "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \
 944         "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \
 945         "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \
 946         "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \
 947         "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \
 948         "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
 949 #endif
 950
 951 #define CONFIG_RAMBOOTCOMMAND           \
 952         "setenv bootargs root=/dev/ram rw "     \
 953         "console=$consoledev,$baudrate $othbootargs; "  \
 954         "tftp $ramdiskaddr $ramdiskfile;"       \
 955         "tftp $loadaddr $bootfile;"             \
 956         "tftp $fdtaddr $fdtfile;"               \
 957         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 958
 959 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 960
 961 #include <asm/fsl_secure_boot.h>
 962
 963 #endif  /* __CONFIG_H */