include/configs/P1022DS.h

   1 /*
   2  * Copyright 2010-2012 Freescale Semiconductor, Inc.
   3  * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
   4  *          Timur Tabi <timur@freescale.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "../board/freescale/common/ics307_clk.h"
  13
  14 #define CONFIG_DISPLAY_BOARDINFO
  15
  16 #ifdef CONFIG_SDCARD
  17 #define CONFIG_SPL_MMC_MINIMAL
  18 #define CONFIG_SPL_FLUSH_IMAGE
  19 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  20 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  21 #define CONFIG_SYS_TEXT_BASE            0x11001000
  22 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
  23 #define CONFIG_SPL_PAD_TO               0x20000
  24 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
  25 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  26 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
  27 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
  28 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (128 << 10)
  29 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  30 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  31 #define CONFIG_SPL_MMC_BOOT
  32 #ifdef CONFIG_SPL_BUILD
  33 #define CONFIG_SPL_COMMON_INIT_DDR
  34 #endif
  35 #endif
  36
  37 #ifdef CONFIG_SPIFLASH
  38 #define CONFIG_SPL_SPI_SUPPORT
  39 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  40 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  41 #define CONFIG_SPL_FLUSH_IMAGE
  42 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  43 #define CONFIG_FSL_LAW          /* Use common FSL init code */
  44 #define CONFIG_SYS_TEXT_BASE            0x11001000
  45 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
  46 #define CONFIG_SPL_PAD_TO               0x20000
  47 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
  48 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  49 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
  50 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
  51 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (128 << 10)
  52 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  53 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  54 #define CONFIG_SPL_SPI_BOOT
  55 #ifdef CONFIG_SPL_BUILD
  56 #define CONFIG_SPL_COMMON_INIT_DDR
  57 #endif
  58 #endif
  59
  60 #define CONFIG_NAND_FSL_ELBC
  61 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
  62 #define CONFIG_SYS_NAND_MAX_OOBFREE     5
  63
  64 #ifdef CONFIG_NAND
  65 #ifdef CONFIG_TPL_BUILD
  66 #define CONFIG_SPL_NAND_BOOT
  67 #define CONFIG_SPL_FLUSH_IMAGE
  68 #define CONFIG_SPL_NAND_INIT
  69 #define CONFIG_SPL_COMMON_INIT_DDR
  70 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
  71 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
  72 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  73 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (832 << 10)
  74 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
  75 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
  76 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
  77 #elif defined(CONFIG_SPL_BUILD)
  78 #define CONFIG_SPL_INIT_MINIMAL
  79 #define CONFIG_SPL_FLUSH_IMAGE
  80 #define CONFIG_SPL_TEXT_BASE            0xff800000
  81 #define CONFIG_SPL_MAX_SIZE             4096
  82 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
  83 #define CONFIG_SYS_NAND_U_BOOT_DST      0xf8f80000
  84 #define CONFIG_SYS_NAND_U_BOOT_START    0xf8f80000
  85 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
  86 #endif
  87 #define CONFIG_SPL_PAD_TO               0x20000
  88 #define CONFIG_TPL_PAD_TO               0x20000
  89 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  90 #define CONFIG_SYS_TEXT_BASE            0x11001000
  91 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  92 #endif
  93
  94 /* High Level Configuration Options */
  95 #define CONFIG_BOOKE                    /* BOOKE */
  96 #define CONFIG_E500                     /* BOOKE e500 family */
  97 #define CONFIG_P1022
  98 #define CONFIG_P1022DS
  99 #define CONFIG_MP                       /* support multiple processors */
 100
 101 #ifndef CONFIG_SYS_TEXT_BASE
 102 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 103 #endif
 104
 105 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 106 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 107 #endif
 108
 109 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
 110 #define CONFIG_PCI                      /* Enable PCI/PCIE */
 111 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
 112 #define CONFIG_PCIE2                    /* PCIE controller 2 (slot 2) */
 113 #define CONFIG_PCIE3                    /* PCIE controller 3 (ULI bridge) */
 114 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 115 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
 116 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 117
 118 #define CONFIG_ENABLE_36BIT_PHYS
 119
 120 #ifdef CONFIG_PHYS_64BIT
 121 #define CONFIG_ADDR_MAP
 122 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 123 #endif
 124
 125 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 126
 127 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 128 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 129 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
 130
 131 /*
 132  * These can be toggled for performance analysis, otherwise use default.
 133  */
 134 #define CONFIG_L2_CACHE
 135 #define CONFIG_BTB
 136
 137 #define CONFIG_SYS_MEMTEST_START        0x00000000
 138 #define CONFIG_SYS_MEMTEST_END          0x7fffffff
 139
 140 #define CONFIG_SYS_CCSRBAR              0xffe00000
 141 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 142
 143 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
 144        SPL code*/
 145 #ifdef CONFIG_SPL_BUILD
 146 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 147 #endif
 148
 149 /* DDR Setup */
 150 #define CONFIG_DDR_SPD
 151 #define CONFIG_VERY_BIG_RAM
 152 #define CONFIG_SYS_FSL_DDR3
 153
 154 #ifdef CONFIG_DDR_ECC
 155 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 156 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 157 #endif
 158
 159 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 160 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 161
 162 #define CONFIG_NUM_DDR_CONTROLLERS      1
 163 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 164 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 165
 166 /* I2C addresses of SPD EEPROMs */
 167 #define CONFIG_SYS_SPD_BUS_NUM          1
 168 #define SPD_EEPROM_ADDRESS              0x51    /* CTLR 0 DIMM 0 */
 169
 170 /* These are used when DDR doesn't use SPD.  */
 171 #define CONFIG_SYS_SDRAM_SIZE           2048
 172 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_2G
 173 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
 174 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014202
 175 #define CONFIG_SYS_DDR_CS1_BNDS         0x0040007F
 176 #define CONFIG_SYS_DDR_CS1_CONFIG       0x80014202
 177 #define CONFIG_SYS_DDR_TIMING_3         0x00010000
 178 #define CONFIG_SYS_DDR_TIMING_0         0x40110104
 179 #define CONFIG_SYS_DDR_TIMING_1         0x5c5bd746
 180 #define CONFIG_SYS_DDR_TIMING_2         0x0fa8d4ca
 181 #define CONFIG_SYS_DDR_MODE_1           0x00441221
 182 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 183 #define CONFIG_SYS_DDR_INTERVAL         0x0a280100
 184 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 185 #define CONFIG_SYS_DDR_CLK_CTRL         0x02800000
 186 #define CONFIG_SYS_DDR_CONTROL          0xc7000008
 187 #define CONFIG_SYS_DDR_CONTROL_2        0x24401041
 188 #define CONFIG_SYS_DDR_TIMING_4         0x00220001
 189 #define CONFIG_SYS_DDR_TIMING_5         0x02401400
 190 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 191 #define CONFIG_SYS_DDR_WRLVL_CONTROL    0x8675f608
 192
 193 /*
 194  * Memory map
 195  *
 196  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 197  * 0x8000_0000  0xdfff_ffff     PCI Express Mem         1.5G non-cacheable
 198  * 0xffc0_0000  0xffc2_ffff     PCI IO range            192K non-cacheable
 199  *
 200  * Localbus cacheable (TBD)
 201  * 0xXXXX_XXXX  0xXXXX_XXXX     SRAM                    YZ M Cacheable
 202  *
 203  * Localbus non-cacheable
 204  * 0xe000_0000  0xe80f_ffff     Promjet/free            128M non-cacheable
 205  * 0xe800_0000  0xefff_ffff     FLASH                   128M non-cacheable
 206  * 0xff80_0000  0xff80_7fff     NAND                    32K non-cacheable
 207  * 0xffdf_0000  0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
 208  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 209  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 210  */
 211
 212 /*
 213  * Local Bus Definitions
 214  */
 215 #define CONFIG_SYS_FLASH_BASE           0xe8000000 /* start of FLASH 128M */
 216 #ifdef CONFIG_PHYS_64BIT
 217 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe8000000ull
 218 #else
 219 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 220 #endif
 221
 222 #define CONFIG_FLASH_BR_PRELIM  \
 223         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 224 #define CONFIG_FLASH_OR_PRELIM  (OR_AM_128MB | 0xff7)
 225
 226 #ifdef CONFIG_NAND
 227 #define CONFIG_SYS_BR1_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 228 #define CONFIG_SYS_OR1_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 229 #else
 230 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 231 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 232 #endif
 233
 234 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 235 #define CONFIG_SYS_FLASH_QUIET_TEST
 236 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 237
 238 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 239 #define CONFIG_SYS_MAX_FLASH_SECT       1024
 240
 241 #ifndef CONFIG_SYS_MONITOR_BASE
 242 #ifdef CONFIG_SPL_BUILD
 243 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 244 #else
 245 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 246 #endif
 247 #endif
 248
 249 #define CONFIG_FLASH_CFI_DRIVER
 250 #define CONFIG_SYS_FLASH_CFI
 251 #define CONFIG_SYS_FLASH_EMPTY_INFO
 252
 253 /* Nand Flash */
 254 #if defined(CONFIG_NAND_FSL_ELBC)
 255 #define CONFIG_SYS_NAND_BASE            0xff800000
 256 #ifdef CONFIG_PHYS_64BIT
 257 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 258 #else
 259 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 260 #endif
 261
 262 #define CONFIG_SYS_NAND_BASE_LIST       {CONFIG_SYS_NAND_BASE}
 263 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 264 #define CONFIG_CMD_NAND                 1
 265 #define CONFIG_SYS_NAND_BLOCK_SIZE      (256 * 1024)
 266 #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE
 267
 268 /* NAND flash config */
 269 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 270                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 271                                | BR_PS_8               /* Port Size = 8 bit */ \
 272                                | BR_MS_FCM             /* MSEL = FCM */ \
 273                                | BR_V)                 /* valid */
 274 #define CONFIG_SYS_NAND_OR_PRELIM  (OR_AM_32KB         /* length 256K */ \
 275                                | OR_FCM_PGS            /* Large Page*/ \
 276                                | OR_FCM_CSCT \
 277                                | OR_FCM_CST \
 278                                | OR_FCM_CHT \
 279                                | OR_FCM_SCY_1 \
 280                                | OR_FCM_TRLX \
 281                                | OR_FCM_EHTR)
 282 #ifdef CONFIG_NAND
 283 #define CONFIG_SYS_BR0_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 284 #define CONFIG_SYS_OR0_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 285 #else
 286 #define CONFIG_SYS_BR1_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 287 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 288 #endif
 289
 290 #endif /* CONFIG_NAND_FSL_ELBC */
 291
 292 #define CONFIG_BOARD_EARLY_INIT_F
 293 #define CONFIG_BOARD_EARLY_INIT_R
 294 #define CONFIG_MISC_INIT_R
 295 #define CONFIG_HWCONFIG
 296
 297 #define CONFIG_FSL_NGPIXIS
 298 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 299 #ifdef CONFIG_PHYS_64BIT
 300 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 301 #else
 302 #define PIXIS_BASE_PHYS         PIXIS_BASE
 303 #endif
 304
 305 #define CONFIG_SYS_BR2_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 306 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_32KB | 0x6ff7)
 307
 308 #define PIXIS_LBMAP_SWITCH      7
 309 #define PIXIS_LBMAP_MASK        0xF0
 310 #define PIXIS_LBMAP_ALTBANK     0x20
 311 #define PIXIS_SPD               0x07
 312 #define PIXIS_SPD_SYSCLK_MASK   0x07
 313 #define PIXIS_ELBC_SPI_MASK     0xc0
 314 #define PIXIS_SPI               0x80
 315
 316 #define CONFIG_SYS_INIT_RAM_LOCK
 317 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* Initial L1 address */
 318 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000 /* Size of used area in RAM */
 319
 320 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 321         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 322 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 323
 324 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 325 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 326
 327 /*
 328  * Config the L2 Cache as L2 SRAM
 329 */
 330 #if defined(CONFIG_SPL_BUILD)
 331 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 332 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
 333 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 334 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 335 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 336 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 337 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
 338 #define CONFIG_SPL_RELOC_STACK_SIZE     (32 << 10)
 339 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
 340 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (108 << 10)
 341 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 342 #elif defined(CONFIG_NAND)
 343 #ifdef CONFIG_TPL_BUILD
 344 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 345 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 346 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 347 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 348 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 349 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 350 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 351 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 352 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 353 #else
 354 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 355 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 356 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 357 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 358 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x2000)
 359 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 360 #endif
 361 #endif
 362 #endif
 363
 364 /*
 365  * Serial Port
 366  */
 367 #define CONFIG_CONS_INDEX               1
 368 #define CONFIG_SYS_NS16550_SERIAL
 369 #define CONFIG_SYS_NS16550_REG_SIZE     1
 370 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 371 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 372 #define CONFIG_NS16550_MIN_FUNCTIONS
 373 #endif
 374
 375 #define CONFIG_SYS_BAUDRATE_TABLE       \
 376         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 377
 378 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 379 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 380
 381 /* Video */
 382
 383 #ifdef CONFIG_FSL_DIU_FB
 384 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x10000)
 385 #define CONFIG_VIDEO
 386 #define CONFIG_CMD_BMP
 387 #define CONFIG_CFB_CONSOLE
 388 #define CONFIG_VIDEO_SW_CURSOR
 389 #define CONFIG_VGA_AS_SINGLE_DEVICE
 390 #define CONFIG_VIDEO_LOGO
 391 #define CONFIG_VIDEO_BMP_LOGO
 392 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 393 /*
 394  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 395  * disable empty flash sector detection, which is I/O-intensive.
 396  */
 397 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 398 #endif
 399
 400 #ifndef CONFIG_FSL_DIU_FB
 401 #endif
 402
 403 #ifdef CONFIG_ATI
 404 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE1_IO_VIRT
 405 #define CONFIG_VIDEO
 406 #define CONFIG_BIOSEMU
 407 #define CONFIG_VIDEO_SW_CURSOR
 408 #define CONFIG_ATI_RADEON_FB
 409 #define CONFIG_VIDEO_LOGO
 410 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 411 #define CONFIG_CFB_CONSOLE
 412 #define CONFIG_VGA_AS_SINGLE_DEVICE
 413 #endif
 414
 415 /* I2C */
 416 #define CONFIG_SYS_I2C
 417 #define CONFIG_SYS_I2C_FSL
 418 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 419 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 420 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 421 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 422 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 423 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 424 #define CONFIG_SYS_I2C_NOPROBES         {{0, 0x29}}
 425
 426 /*
 427  * I2C2 EEPROM
 428  */
 429 #define CONFIG_ID_EEPROM
 430 #define CONFIG_SYS_I2C_EEPROM_NXID
 431 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 432 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 433 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 434
 435 /*
 436  * eSPI - Enhanced SPI
 437  */
 438
 439 #define CONFIG_HARD_SPI
 440
 441 #define CONFIG_SF_DEFAULT_SPEED         10000000
 442 #define CONFIG_SF_DEFAULT_MODE          0
 443
 444 /*
 445  * General PCI
 446  * Memory space is mapped 1-1, but I/O space must start from 0.
 447  */
 448
 449 /* controller 1, Slot 2, tgtid 1, Base address a000 */
 450 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xc0000000
 451 #ifdef CONFIG_PHYS_64BIT
 452 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 453 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc40000000ull
 454 #else
 455 #define CONFIG_SYS_PCIE1_MEM_BUS        0xc0000000
 456 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc0000000
 457 #endif
 458 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 459 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc20000
 460 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 461 #ifdef CONFIG_PHYS_64BIT
 462 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc20000ull
 463 #else
 464 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc20000
 465 #endif
 466 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 467
 468 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
 469 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 470 #ifdef CONFIG_PHYS_64BIT
 471 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 472 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 473 #else
 474 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 475 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 476 #endif
 477 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 478 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 479 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 480 #ifdef CONFIG_PHYS_64BIT
 481 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 482 #else
 483 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 484 #endif
 485 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 486
 487 /* controller 3, Slot 1, tgtid 3, Base address b000 */
 488 #define CONFIG_SYS_PCIE3_MEM_VIRT       0x80000000
 489 #ifdef CONFIG_PHYS_64BIT
 490 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 491 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc00000000ull
 492 #else
 493 #define CONFIG_SYS_PCIE3_MEM_BUS        0x80000000
 494 #define CONFIG_SYS_PCIE3_MEM_PHYS       0x80000000
 495 #endif
 496 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 497 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc00000
 498 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 499 #ifdef CONFIG_PHYS_64BIT
 500 #define CONFIG_SYS_PCIE3_IO_PHYS        0xfffc00000ull
 501 #else
 502 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc00000
 503 #endif
 504 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 505
 506 #ifdef CONFIG_PCI
 507 #define CONFIG_PCI_INDIRECT_BRIDGE
 508 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 509 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 510 #endif
 511
 512 /* SATA */
 513 #define CONFIG_LIBATA
 514 #define CONFIG_FSL_SATA
 515 #define CONFIG_FSL_SATA_V2
 516
 517 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 518 #define CONFIG_SATA1
 519 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 520 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 521 #define CONFIG_SATA2
 522 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 523 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 524
 525 #ifdef CONFIG_FSL_SATA
 526 #define CONFIG_LBA48
 527 #define CONFIG_CMD_SATA
 528 #define CONFIG_DOS_PARTITION
 529 #endif
 530
 531 #define CONFIG_MMC
 532 #ifdef CONFIG_MMC
 533 #define CONFIG_FSL_ESDHC
 534 #define CONFIG_GENERIC_MMC
 535 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 536 #endif
 537
 538 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 539 #define CONFIG_DOS_PARTITION
 540 #endif
 541
 542 #define CONFIG_TSEC_ENET
 543 #ifdef CONFIG_TSEC_ENET
 544
 545 #define CONFIG_TSECV2
 546
 547 #define CONFIG_MII                      /* MII PHY management */
 548 #define CONFIG_TSEC1            1
 549 #define CONFIG_TSEC1_NAME       "eTSEC1"
 550 #define CONFIG_TSEC2            1
 551 #define CONFIG_TSEC2_NAME       "eTSEC2"
 552
 553 #define TSEC1_PHY_ADDR          1
 554 #define TSEC2_PHY_ADDR          2
 555
 556 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 557 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 558
 559 #define TSEC1_PHYIDX            0
 560 #define TSEC2_PHYIDX            0
 561
 562 #define CONFIG_ETHPRIME         "eTSEC1"
 563
 564 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 565 #endif
 566
 567 /*
 568  * Dynamic MTD Partition support with mtdparts
 569  */
 570 #define CONFIG_MTD_DEVICE
 571 #define CONFIG_MTD_PARTITIONS
 572 #define CONFIG_CMD_MTDPARTS
 573 #define CONFIG_FLASH_CFI_MTD
 574 #ifdef CONFIG_PHYS_64BIT
 575 #define MTDIDS_DEFAULT "nor0=fe8000000.nor"
 576 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:48m(ramdisk)," \
 577                         "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \
 578                         "512k(dtb),768k(u-boot)"
 579 #else
 580 #define MTDIDS_DEFAULT "nor0=e8000000.nor"
 581 #define MTDPARTS_DEFAULT "mtdparts=e8000000.nor:48m(ramdisk)," \
 582                         "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \
 583                         "512k(dtb),768k(u-boot)"
 584 #endif
 585
 586 /*
 587  * Environment
 588  */
 589 #ifdef CONFIG_SPIFLASH
 590 #define CONFIG_ENV_IS_IN_SPI_FLASH
 591 #define CONFIG_ENV_SPI_BUS      0
 592 #define CONFIG_ENV_SPI_CS       0
 593 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 594 #define CONFIG_ENV_SPI_MODE     0
 595 #define CONFIG_ENV_SIZE         0x2000  /* 8KB */
 596 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 597 #define CONFIG_ENV_SECT_SIZE    0x10000
 598 #elif defined(CONFIG_SDCARD)
 599 #define CONFIG_ENV_IS_IN_MMC
 600 #define CONFIG_FSL_FIXED_MMC_LOCATION
 601 #define CONFIG_ENV_SIZE         0x2000
 602 #define CONFIG_SYS_MMC_ENV_DEV  0
 603 #elif defined(CONFIG_NAND)
 604 #ifdef CONFIG_TPL_BUILD
 605 #define CONFIG_ENV_SIZE         0x2000
 606 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 607 #else
 608 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 609 #endif
 610 #define CONFIG_ENV_IS_IN_NAND
 611 #define CONFIG_ENV_OFFSET       (1024 * 1024)
 612 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 613 #elif defined(CONFIG_SYS_RAMBOOT)
 614 #define CONFIG_ENV_IS_NOWHERE   /* Store ENV in memory only */
 615 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 616 #define CONFIG_ENV_SIZE         0x2000
 617 #else
 618 #define CONFIG_ENV_IS_IN_FLASH
 619 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 620 #define CONFIG_ENV_SIZE         0x2000
 621 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 622 #endif
 623
 624 #define CONFIG_LOADS_ECHO
 625 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 626
 627 /*
 628  * Command line configuration.
 629  */
 630 #define CONFIG_CMD_ERRATA
 631 #define CONFIG_CMD_IRQ
 632 #define CONFIG_CMD_REGINFO
 633
 634 #ifdef CONFIG_PCI
 635 #define CONFIG_CMD_PCI
 636 #endif
 637
 638 /*
 639  * USB
 640  */
 641 #define CONFIG_HAS_FSL_DR_USB
 642 #ifdef CONFIG_HAS_FSL_DR_USB
 643 #define CONFIG_USB_EHCI
 644
 645 #ifdef CONFIG_USB_EHCI
 646 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 647 #define CONFIG_USB_EHCI_FSL
 648 #endif
 649 #endif
 650
 651 /*
 652  * Miscellaneous configurable options
 653  */
 654 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 655 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 656 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 657 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 658 #ifdef CONFIG_CMD_KGDB
 659 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 660 #else
 661 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 662 #endif
 663 /* Print Buffer Size */
 664 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 665 #define CONFIG_SYS_MAXARGS      16
 666 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 667
 668 /*
 669  * For booting Linux, the board info and command line data
 670  * have to be in the first 64 MB of memory, since this is
 671  * the maximum mapped by the Linux kernel during initialization.
 672  */
 673 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 674 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 675
 676 #ifdef CONFIG_CMD_KGDB
 677 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 678 #endif
 679
 680 /*
 681  * Environment Configuration
 682  */
 683
 684 #define CONFIG_HOSTNAME         p1022ds
 685 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 686 #define CONFIG_BOOTFILE         "uImage"
 687 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 688
 689 #define CONFIG_LOADADDR         1000000
 690
 691
 692 #define CONFIG_BAUDRATE 115200
 693
 694 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 695         "netdev=eth0\0"                                         \
 696         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 697         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 698         "tftpflash=tftpboot $loadaddr $uboot && "               \
 699                 "protect off $ubootaddr +$filesize && "         \
 700                 "erase $ubootaddr +$filesize && "               \
 701                 "cp.b $loadaddr $ubootaddr $filesize && "       \
 702                 "protect on $ubootaddr +$filesize && "          \
 703                 "cmp.b $loadaddr $ubootaddr $filesize\0"        \
 704         "consoledev=ttyS0\0"                                    \
 705         "ramdiskaddr=2000000\0"                                 \
 706         "ramdiskfile=rootfs.ext2.gz.uboot\0"                    \
 707         "fdtaddr=1e00000\0"                                     \
 708         "fdtfile=p1022ds.dtb\0"                                 \
 709         "bdev=sda3\0"                                           \
 710         "hwconfig=esdhc;audclk:12\0"
 711
 712 #define CONFIG_HDBOOT                                   \
 713         "setenv bootargs root=/dev/$bdev rw "           \
 714         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 715         "tftp $loadaddr $bootfile;"                     \
 716         "tftp $fdtaddr $fdtfile;"                       \
 717         "bootm $loadaddr - $fdtaddr"
 718
 719 #define CONFIG_NFSBOOTCOMMAND                                           \
 720         "setenv bootargs root=/dev/nfs rw "                             \
 721         "nfsroot=$serverip:$rootpath "                                  \
 722         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 723         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 724         "tftp $loadaddr $bootfile;"                                     \
 725         "tftp $fdtaddr $fdtfile;"                                       \
 726         "bootm $loadaddr - $fdtaddr"
 727
 728 #define CONFIG_RAMBOOTCOMMAND                                           \
 729         "setenv bootargs root=/dev/ram rw "                             \
 730         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 731         "tftp $ramdiskaddr $ramdiskfile;"                               \
 732         "tftp $loadaddr $bootfile;"                                     \
 733         "tftp $fdtaddr $fdtfile;"                                       \
 734         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 735
 736 #define CONFIG_BOOTCOMMAND              CONFIG_RAMBOOTCOMMAND
 737
 738 #endif