include/configs/P2020COME.h

   1 /*
   2  * Copyright 2009-2010,2012 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 /* The P2020COME board is only booted via the Freescale On-Chip ROM */
  27 #define CONFIG_SYS_RAMBOOT
  28 #define CONFIG_SYS_EXTRA_ENV_RELOC
  29
  30 #define CONFIG_SYS_TEXT_BASE            0xf8f80000
  31 #define CONFIG_RESET_VECTOR_ADDRESS     0xf8fffffc
  32
  33 #ifdef CONFIG_SDCARD
  34 #define CONFIG_RAMBOOT_SDCARD           1
  35 #endif
  36
  37 #ifdef CONFIG_SPIFLASH
  38 #define CONFIG_RAMBOOT_SPIFLASH         1
  39 #endif
  40
  41 #ifndef CONFIG_SYS_MONITOR_BASE
  42 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  43 #endif
  44
  45 /* High Level Configuration Options */
  46 #define CONFIG_BOOKE            1       /* BOOKE */
  47 #define CONFIG_E500             1       /* BOOKE e500 family */
  48 #define CONFIG_MPC85xx          1       /* MPC8540/60/55/41/48/P1020/P2020,etc*/
  49 #define CONFIG_P2020            1
  50 #define CONFIG_P2020COME        1
  51 #define CONFIG_FSL_ELBC         1       /* Enable eLBC Support */
  52 #define CONFIG_MP
  53
  54 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  55 #if defined(CONFIG_PCI)
  56 #define CONFIG_PCIE1            1       /* PCIE controller 1 (slot 1) */
  57 #define CONFIG_PCIE2            1       /* PCIE controller 2 (slot 2) */
  58 #define CONFIG_PCIE3            1       /* PCIE controller 3 (slot 3) */
  59
  60 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  61 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  62 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  63 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  64 #endif /* #if defined(CONFIG_PCI) */
  65 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  66 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  67 #define CONFIG_ENV_OVERWRITE
  68
  69 #if defined(CONFIG_PCI)
  70 #define CONFIG_E1000            1       /* E1000 pci Ethernet card */
  71 #endif
  72
  73 #ifndef __ASSEMBLY__
  74 extern unsigned long get_board_ddr_clk(unsigned long dummy);
  75 extern unsigned long get_board_sys_clk(unsigned long dummy);
  76 #endif
  77
  78 /*
  79  * For P2020COME DDRCLK and SYSCLK are from the same oscillator
  80  * For DA phase the SYSCLK is 66MHz
  81  * For EA phase the SYSCLK is 100MHz
  82  */
  83 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk(0)
  84 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
  85
  86 #define CONFIG_HWCONFIG
  87
  88 /*
  89  * These can be toggled for performance analysis, otherwise use default.
  90  */
  91 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  92 #define CONFIG_BTB                      /* toggle branch prediction */
  93
  94 #define CONFIG_ADDR_STREAMING           /* toggle addr streaming */
  95
  96 #define CONFIG_ENABLE_36BIT_PHYS        1
  97
  98 #ifdef CONFIG_PHYS_64BIT
  99 #define CONFIG_ADDR_MAP                 1
 100 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 101 #endif
 102
 103 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest works on */
 104 #define CONFIG_SYS_MEMTEST_END          0x1fffffff
 105 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 106
 107  /*
 108   * Config the L2 Cache as L2 SRAM
 109   */
 110 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 111 #ifdef CONFIG_PHYS_64BIT
 112 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    0xff8f80000ull
 113 #else
 114 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 115 #endif
 116 #define CONFIG_SYS_L2_SIZE              (512 << 10)
 117 #define CONFIG_SYS_INIT_L2_END          (CONFIG_SYS_INIT_L2_ADDR \
 118                                         + CONFIG_SYS_L2_SIZE)
 119
 120 #define CONFIG_SYS_CCSRBAR              0xffe00000
 121 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 122
 123 /* DDR Setup */
 124 #define CONFIG_FSL_DDR3
 125 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
 126 #define CONFIG_DDR_SPD
 127
 128 #define CONFIG_DDR_ECC
 129 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 130 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 131
 132 #define CONFIG_SYS_SDRAM_SIZE           2048ULL /* DDR size on P2020COME */
 133 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 134 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 135
 136 #define CONFIG_NUM_DDR_CONTROLLERS      1
 137 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 138 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 139
 140 #define CONFIG_SYS_DDR_ERR_INT_EN       0x0000000d
 141 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 142 #define CONFIG_SYS_DDR_SBE              0x00ff0000
 143
 144 #define CONFIG_SYS_SPD_BUS_NUM          1
 145 #define SPD_EEPROM_ADDRESS              0x53
 146
 147 /*
 148  * Memory map
 149  *
 150  * 0x0000_0000  0x7fff_ffff     DDR3                    2G Cacheable
 151  * 0x8000_0000  0x9fff_ffff     PCI Express 3 Mem       1G non-cacheable
 152  * 0xa000_0000  0xbfff_ffff     PCI Express 2 Mem       1G non-cacheable
 153  * 0xc000_0000  0xdfff_ffff     PCI Express 1 Mem       1G non-cacheable
 154  * 0xffc1_0000  0xffc1_ffff     PCI Express 3 IO        64K non-cacheable
 155  * 0xffc2_0000  0xffc2_ffff     PCI Express 2 IO        64K non-cacheable
 156  * 0xffc3_0000  0xffc3_ffff     PCI Express 1 IO        64K non-cacheable
 157  *
 158  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 159  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 160  */
 161
 162 /*
 163  * Local Bus Definitions
 164  */
 165
 166 /* There is no NOR Flash on P2020COME */
 167 #define CONFIG_SYS_NO_FLASH
 168
 169 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 170 #define CONFIG_HWCONFIG
 171
 172 #define CONFIG_SYS_INIT_RAM_LOCK        1
 173 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* stack in RAM */
 174 #ifdef CONFIG_PHYS_64BIT
 175 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 176 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       CONFIG_SYS_INIT_RAM_ADDR
 177 /* the assembler doesn't like typecast */
 178 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 179         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 180           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 181 #else
 182 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 183 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 184 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 185 #endif
 186 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 187
 188 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
 189                                                 - GENERATED_GBL_DATA_SIZE)
 190 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 191
 192 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)
 193 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
 194
 195 /* Serial Port - controlled on board with jumper J8
 196  * open - index 2
 197  * shorted - index 1
 198  */
 199 #define CONFIG_CONS_INDEX               1
 200 #define CONFIG_SYS_NS16550
 201 #define CONFIG_SYS_NS16550_SERIAL
 202 #define CONFIG_SYS_NS16550_REG_SIZE     1
 203 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 204
 205 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 206
 207 #define CONFIG_SYS_BAUDRATE_TABLE   \
 208         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 209
 210 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 211 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 212
 213 /* Use the HUSH parser */
 214 #define CONFIG_SYS_HUSH_PARSER
 215
 216 /*
 217  * Pass open firmware flat tree
 218  */
 219 #define CONFIG_OF_LIBFDT                1
 220 #define CONFIG_OF_BOARD_SETUP           1
 221 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 222
 223 /* new uImage format support */
 224 #define CONFIG_FIT                      1
 225 #define CONFIG_FIT_VERBOSE              1
 226
 227 /* I2C */
 228 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 229 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 230 #define CONFIG_I2C_MULTI_BUS
 231 #define CONFIG_I2C_CMD_TREE
 232 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address*/
 233 #define CONFIG_SYS_I2C_SLAVE            0x7F
 234 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 235 #define CONFIG_SYS_I2C_OFFSET           0x3000
 236 #define CONFIG_SYS_I2C2_OFFSET          0x3100
 237
 238 /*
 239  * I2C2 EEPROM
 240  */
 241 #define CONFIG_ID_EEPROM
 242 #ifdef CONFIG_ID_EEPROM
 243 #define CONFIG_SYS_I2C_EEPROM_NXID
 244 #endif
 245 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 246 #define CONFIG_SYS_I2C_EEPROM_ADDR2     0x18
 247 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 248 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 249 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10 /* and takes up to 10 msec */
 250
 251 /*
 252  * eSPI - Enhanced SPI
 253  */
 254 #define CONFIG_FSL_ESPI
 255 #define CONFIG_SPI_FLASH
 256 #define CONFIG_SPI_FLASH_STMICRO
 257 #define CONFIG_CMD_SF
 258 #define CONFIG_SF_DEFAULT_SPEED         10000000
 259 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 260
 261 /*
 262  * General PCI
 263  * Memory space is mapped 1-1, but I/O space must start from 0.
 264  */
 265 #if defined(CONFIG_PCI)
 266
 267 /* controller 3, Slot 3, tgtid 3, Base address 8000 */
 268 #define CONFIG_SYS_PCIE3_MEM_VIRT       0x80000000
 269 #define CONFIG_SYS_PCIE3_MEM_BUS        0x80000000
 270 #define CONFIG_SYS_PCIE3_MEM_PHYS       0x80000000
 271 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000  /* 512M */
 272 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc10000
 273 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 274 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc10000
 275 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000  /* 64k */
 276
 277 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 278 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 279 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 280 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 281 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000  /* 512M */
 282 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc20000
 283 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 284 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc20000
 285 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000  /* 64k */
 286
 287 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 288 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xc0000000
 289 #define CONFIG_SYS_PCIE1_MEM_BUS        0xc0000000
 290 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc0000000
 291 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000  /* 512M */
 292 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc30000
 293 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 294 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc30000
 295 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000  /* 64k */
 296
 297 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 298
 299 #undef CONFIG_EEPRO100
 300 #undef CONFIG_TULIP
 301 #undef CONFIG_RTL8139
 302
 303 #ifdef CONFIG_RTL8139
 304 /* This macro is used by RTL8139 but not defined in PPC architecture */
 305 #define KSEG1ADDR(x)            (x)
 306 #define _IO_BASE                0x00000000
 307 #endif
 308
 309 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 310 #define CONFIG_DOS_PARTITION
 311
 312 #endif  /* CONFIG_PCI */
 313
 314 #if defined(CONFIG_TSEC_ENET)
 315 #define CONFIG_MII              1       /* MII PHY management */
 316 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 317 #define CONFIG_TSEC1            1
 318 #define CONFIG_TSEC1_NAME       "eTSEC1"
 319 #define CONFIG_TSEC2            1
 320 #define CONFIG_TSEC2_NAME       "eTSEC2"
 321 #define CONFIG_TSEC3            1
 322 #define CONFIG_TSEC3_NAME       "eTSEC3"
 323
 324 #define TSEC1_PHY_ADDR          0
 325 #define TSEC2_PHY_ADDR          2
 326 #define TSEC3_PHY_ADDR          1
 327
 328 #undef CONFIG_VSC7385_ENET
 329
 330 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 331 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 332 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 333
 334 #define TSEC1_PHYIDX            0
 335 #define TSEC2_PHYIDX            0
 336 #define TSEC3_PHYIDX            0
 337
 338 #define CONFIG_ETHPRIME         "eTSEC1"
 339
 340 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 341
 342 #endif  /* CONFIG_TSEC_ENET */
 343
 344 /*
 345  * Environment
 346  */
 347 #if defined(CONFIG_RAMBOOT_SDCARD)
 348         #define CONFIG_ENV_IS_IN_MMC    1
 349         #define CONFIG_FSL_FIXED_MMC_LOCATION
 350         #define CONFIG_ENV_SIZE         0x2000
 351         #define CONFIG_SYS_MMC_ENV_DEV  0
 352 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 353         #define CONFIG_ENV_IS_IN_SPI_FLASH
 354         #define CONFIG_ENV_SPI_BUS      0
 355         #define CONFIG_ENV_SPI_CS       0
 356         #define CONFIG_ENV_SPI_MAX_HZ   10000000
 357         #define CONFIG_ENV_SPI_MODE     0
 358         #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 359         #define CONFIG_ENV_SECT_SIZE    0x10000
 360         #define CONFIG_ENV_SIZE         0x2000
 361 #endif
 362
 363 #define CONFIG_LOADS_ECHO               1
 364 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1
 365
 366 /*
 367  * Command line configuration.
 368  */
 369 #include <config_cmd_default.h>
 370
 371 #define CONFIG_CMD_ELF
 372 #define CONFIG_CMD_I2C
 373 #define CONFIG_CMD_IRQ
 374 #define CONFIG_CMD_MII
 375 #define CONFIG_CMD_PING
 376 #define CONFIG_CMD_SETEXPR
 377 #define CONFIG_CMD_REGINFO
 378
 379 #if defined(CONFIG_PCI)
 380 #define CONFIG_CMD_NET
 381 #define CONFIG_CMD_PCI
 382 #endif
 383
 384 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 385
 386 #define CONFIG_MMC      1
 387
 388 #ifdef CONFIG_MMC
 389 #define CONFIG_BOARD_EARLY_INIT_F       1       /* Call board_pre_init */
 390 #define CONFIG_CMD_MMC
 391 #define CONFIG_DOS_PARTITION
 392 #define CONFIG_FSL_ESDHC
 393 #define CONFIG_GENERIC_MMC
 394 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 395 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 396 #endif /* CONFIG_MMC */
 397
 398 #define CONFIG_HAS_FSL_DR_USB
 399 #ifdef CONFIG_HAS_FSL_DR_USB
 400 #define CONFIG_USB_EHCI
 401
 402 #ifdef CONFIG_USB_EHCI
 403 #define CONFIG_CMD_USB
 404 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 405 #define CONFIG_USB_EHCI_FSL
 406 #define CONFIG_USB_STORAGE
 407 #endif
 408 #endif
 409
 410 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 411 #define CONFIG_CMD_EXT2
 412 #define CONFIG_CMD_FAT
 413 #define CONFIG_DOS_PARTITION
 414 #endif
 415
 416 /* Misc Extra Settings */
 417 #define CONFIG_CMD_DHCP                 1
 418
 419 #define CONFIG_CMD_DATE                 1
 420 #define CONFIG_RTC_M41T62               1
 421 #define CONFIG_SYS_RTC_BUS_NUM          1
 422 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 423
 424 /*
 425  * Miscellaneous configurable options
 426  */
 427 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 428 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 429 #define CONFIG_AUTO_COMPLETE    1               /* add autocompletion support */
 430 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 431 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 432 #if defined(CONFIG_CMD_KGDB)
 433 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 434 #else
 435 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 436 #endif
 437 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 438                                                 /* Print Buffer Size */
 439 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 440 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 441 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms tick */
 442
 443 /*
 444  * For booting Linux, the board info and command line data
 445  * have to be in the first 64 MB of memory, since this is
 446  * the maximum mapped by the Linux kernel during initialization.
 447  */
 448 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)
 449 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)
 450
 451 #if defined(CONFIG_CMD_KGDB)
 452 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 453 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 454 #endif
 455
 456 /*
 457  * Environment Configuration
 458  */
 459
 460 /* The mac addresses for all ethernet interface */
 461 #if defined(CONFIG_TSEC_ENET)
 462 #define CONFIG_HAS_ETH0
 463 #define CONFIG_HAS_ETH1
 464 #define CONFIG_HAS_ETH2
 465 #define CONFIG_HAS_ETH3
 466 #endif
 467
 468 #define CONFIG_HOSTNAME         unknown
 469 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 470 #define CONFIG_BOOTFILE         "uImage"
 471 #define CONFIG_UBOOTPATH        u-boot.bin
 472
 473 /* default location for tftp and bootm */
 474 #define CONFIG_LOADADDR         1000000
 475
 476 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 477 #undef  CONFIG_BOOTARGS                 /* the boot command will set bootargs */
 478
 479 #define CONFIG_BAUDRATE         115200
 480
 481 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 482         "hwconfig=fsl_ddr:ecc=on\0"                                     \
 483         "bootcmd=run sdboot\0"                                          \
 484         "sdboot=setenv bootargs root=/dev/mmcblk0p2 rw "                \
 485                 "rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\
 486                 "$othbootargs; mmcinfo; "                               \
 487                 "ext2load mmc 0:2 $loadaddr /boot/$bootfile; "          \
 488                 "ext2load mmc 0:2 $fdtaddr /boot/$fdtfile; "            \
 489                 "bootm $loadaddr - $fdtaddr\0"                          \
 490         "sdfatboot=setenv bootargs root=/dev/ram rw "                   \
 491                 "rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\
 492                 "$othbootargs; mmcinfo; "                               \
 493                 "fatload mmc 0:1 $loadaddr $bootfile; "                 \
 494                 "fatload mmc 0:1 $fdtaddr $fdtfile; "                   \
 495                 "fatload mmc 0:1 $ramdiskaddr $ramdiskfile; "           \
 496                 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"               \
 497         "usbboot=setenv bootargs root=/dev/sda1 rw "                    \
 498                 "rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\
 499                 "$othbootargs; "                                        \
 500                 "usb start; "                                           \
 501                 "ext2load usb 0:1 $loadaddr /boot/$bootfile; "          \
 502                 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile; "            \
 503                 "bootm $loadaddr - $fdtaddr\0"                          \
 504         "usbfatboot=setenv bootargs root=/dev/ram rw "                  \
 505                 "console=$consoledev,$baudrate $othbootargs; "          \
 506                 "usb start; "                                           \
 507                 "fatload usb 0:2 $loadaddr $bootfile; "                 \
 508                 "fatload usb 0:2 $fdtaddr $fdtfile; "                   \
 509                 "fatload usb 0:2 $ramdiskaddr $ramdiskfile; "           \
 510                 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"               \
 511         "usbext2boot=setenv bootargs root=/dev/ram rw "                 \
 512                 "console=$consoledev,$baudrate $othbootargs; "          \
 513                 "usb start; "                                           \
 514                 "ext2load usb 0:4 $loadaddr $bootfile; "                \
 515                 "ext2load usb 0:4 $fdtaddr $fdtfile; "                  \
 516                 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile; "          \
 517                 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"               \
 518         "upgradespi=sf probe 0; "                                       \
 519                 "setenv startaddr 0; "                                  \
 520                 "setenv erasesize a0000; "                              \
 521                 "tftp 1000000 $tftppath/$uboot_spi; "                   \
 522                 "sf erase $startaddr $erasesize; "                      \
 523                 "sf write 1000000 $startaddr $filesize; "               \
 524                 "sf erase 100000 120000\0"                              \
 525         "clearspienv=sf probe 0;sf erase 100000 20000\0"                \
 526         "othbootargs=ramdisk_size=700000 cache-sram-size=0x10000\0"     \
 527         "netdev=eth0\0"                                                 \
 528         "rootdelaysecond=15\0"                                          \
 529         "uboot_nor=u-boot-nor.bin\0"                                    \
 530         "uboot_spi=u-boot-p2020.spi\0"                                  \
 531         "uboot_sd=u-boot-p2020.bin\0"                                   \
 532         "consoledev=ttyS0\0"                                            \
 533         "ramdiskaddr=2000000\0"                                         \
 534         "ramdiskfile=rootfs-dev.ext2.img\0"                             \
 535         "fdtaddr=c00000\0"                                              \
 536         "fdtfile=uImage-2.6.32-p2020.dtb\0"                             \
 537         "tftppath=p2020\0"
 538
 539 #define CONFIG_HDBOOT                                                   \
 540         "setenv bootargs root=/dev/$bdev rw rootdelay=30 "              \
 541         "console=$consoledev,$baudrate $othbootargs;"                   \
 542         "usb start;"                                                    \
 543         "ext2load usb 0:1 $loadaddr /boot/$bootfile;"                   \
 544         "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"                     \
 545         "bootm $loadaddr - $fdtaddr"
 546
 547 #define CONFIG_NFSBOOTCOMMAND                                           \
 548         "setenv bootargs root=/dev/nfs rw "                             \
 549         "nfsroot=$serverip:$rootpath "                                  \
 550         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "\
 551         "console=$consoledev,$baudrate $othbootargs;"                   \
 552         "tftp $loadaddr $tftppath/$bootfile;"                           \
 553         "tftp $fdtaddr $tftppath/$fdtfile;"                             \
 554         "bootm $loadaddr - $fdtaddr"
 555
 556
 557 #define CONFIG_RAMBOOTCOMMAND                                           \
 558         "setenv bootargs root=/dev/ram rw "                             \
 559         "console=$consoledev,$baudrate $othbootargs;"                   \
 560         "tftp $ramdiskaddr $tftppath/$ramdiskfile;"                     \
 561         "tftp $loadaddr $tftppath/$bootfile;"                           \
 562         "tftp $fdtaddr $tftppath/$fdtfile;"                             \
 563         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 564
 565 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 566
 567 #endif  /* __CONFIG_H */