include/configs/PCI405.h

   1 /*
   2  * (C) Copyright 2001
   3  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35
  36 #define CONFIG_405GP            1       /* This is a PPC405 CPU         */
  37 #define CONFIG_4xx              1       /* ...member of PPC4xx family   */
  38 #define CONFIG_PCI405           1       /* ...on a PCI405 board         */
  39
  40 #define CONFIG_BOARD_PRE_INIT   1       /* call board_pre_init()        */
  41 #define CONFIG_MISC_INIT_R      1       /* call misc_init_r() on init   */
  42
  43 #define CONFIG_SYS_CLK_FREQ     25000000 /* external frequency to pll   */
  44
  45 #define CONFIG_BAUDRATE         115200
  46 #define CONFIG_BOOTDELAY        3       /* autoboot after 3 seconds     */
  47
  48 #if 0
  49 #define CONFIG_PREBOOT                                                          \
  50         "crc32 f0207004 ffc 0;"                                                 \
  51         "if cmp 0 f0207000 1;"                                                  \
  52         "then;echo Old CRC is correct;crc32 f0207004 ff4 f0207000;"             \
  53         "else;echo Old CRC is bad;fi"
  54 #endif
  55
  56 #undef  CONFIG_BOOTARGS
  57 #if 1
  58 #define CONFIG_BOOTCOMMAND                                                      \
  59         "bootm fffc0000"
  60 #else
  61 #define CONFIG_BOOTCOMMAND                                                      \
  62         "mw.l 0 ffffffff; mw.l 4 ffffffff;"                                     \
  63         "while cmp 0 4 1; do echo Waiting for Host...;done;"                    \
  64         "bootm 400000"
  65 #endif
  66
  67 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  68 #define CFG_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
  69
  70 #define CONFIG_MII              1       /* MII PHY management           */
  71 #define CONFIG_PHY_ADDR         0       /* PHY address                  */
  72
  73 #define CONFIG_RTC_M48T35A      1               /* ST Electronics M48 timekeeper */
  74
  75 #define CONFIG_COMMANDS       ( CONFIG_CMD_DFL  | \
  76                                 CFG_CMD_PCI     | \
  77                                 CFG_CMD_IRQ     | \
  78                                 CFG_CMD_ELF     | \
  79                                 CFG_CMD_DATE    | \
  80                                 CFG_CMD_I2C     | \
  81                                 CFG_CMD_BSP     | \
  82                                 CFG_CMD_EEPROM  )
  83
  84 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
  85 #include <cmd_confdefs.h>
  86
  87 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  88
  89 #define CONFIG_SDRAM_BANK0      1       /* init onboard SDRAM bank 0    */
  90
  91 #define CONFIG_PRAM             2048    /* reserve 2 MB "protected RAM" */
  92
  93 /*
  94  * Miscellaneous configurable options
  95  */
  96 #define CFG_LONGHELP                    /* undef to save memory         */
  97 #define CFG_PROMPT      "=> "           /* Monitor Command Prompt       */
  98
  99 #define CFG_HUSH_PARSER                 /* use "hush" command parser    */
 100 #ifdef  CFG_HUSH_PARSER
 101 #define CFG_PROMPT_HUSH_PS2     "> "
 102 #endif
 103
 104 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 105 #define CFG_CBSIZE      1024            /* Console I/O Buffer Size      */
 106 #else
 107 #define CFG_CBSIZE      256             /* Console I/O Buffer Size      */
 108 #endif
 109 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 110 #define CFG_MAXARGS     16              /* max number of command args   */
 111 #define CFG_BARGSIZE    CFG_CBSIZE      /* Boot Argument Buffer Size    */
 112
 113 #define CFG_DEVICE_NULLDEV      1       /* include nulldev device       */
 114
 115 #define CFG_CONSOLE_INFO_QUIET  1       /* don't print console @ startup*/
 116
 117 #define CFG_MEMTEST_START       0x0400000       /* memtest works on     */
 118 #define CFG_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 119
 120 #undef  CFG_EXT_SERIAL_CLOCK           /* no external serial clock used */
 121 #define CFG_IGNORE_405_UART_ERRATA_59   /* ignore ppc405gp errata #59   */
 122 #define CFG_BASE_BAUD       691200
 123
 124 /* The following table includes the supported baudrates */
 125 #define CFG_BAUDRATE_TABLE      \
 126         { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 127          57600, 115200, 230400, 460800, 921600 }
 128
 129 #define CFG_LOAD_ADDR   0x100000        /* default load address */
 130 #define CFG_EXTBDINFO   1               /* To use extended board_into (bd_t) */
 131
 132 #define CFG_HZ          1000            /* decrementer freq: 1 ms ticks */
 133
 134 #undef CONFIG_ZERO_BOOTDELAY_CHECK      /* check for keypress on bootdelay==0 */
 135
 136 /*-----------------------------------------------------------------------
 137  * PCI stuff
 138  *-----------------------------------------------------------------------
 139  */
 140 #define PCI_HOST_ADAPTER 0              /* configure as pci adapter     */
 141 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 142 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 143
 144 #define CONFIG_PCI                      /* include pci support          */
 145 #define CONFIG_PCI_HOST PCI_HOST_ADAPTER /* select pci host function    */
 146 #undef  CONFIG_PCI_PNP                  /* no pci plug-and-play         */
 147                                         /* resource configuration       */
 148
 149 #define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */
 150
 151 #define CFG_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
 152 #define CFG_PCI_SUBSYS_DEVICEID 0x0407  /* PCI Device ID: PCI-405       */
 153 #define CFG_PCI_CLASSCODE       0x0280  /* PCI Class Code: Network/Other*/
 154 #define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
 155 #define CFG_PCI_PTM1MS  0xff000001      /* 16MB, enable hard-wired to 1 */
 156 #define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
 157
 158 #if 0 /* test-only */
 159 #define CFG_PCI_PTM2LA  0xffc00000      /* point to flash               */
 160 #define CFG_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
 161 #define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 162 #else
 163 #define CFG_PCI_PTM2LA  0xef600000      /* point to internal regs       */
 164 #define CFG_PCI_PTM2MS  0xffe00001      /* 2MB, enable                  */
 165 #define CFG_PCI_PTM2PCI 0x00000000      /* Host: use this pci address   */
 166 #endif
 167
 168 /*-----------------------------------------------------------------------
 169  * Start addresses for the final memory configuration
 170  * (Set up by the startup code)
 171  * Please note that CFG_SDRAM_BASE _must_ start at 0
 172  */
 173 #define CFG_SDRAM_BASE          0x00000000
 174 #define CFG_FLASH_BASE          0xFFFD0000
 175 #define CFG_MONITOR_BASE        CFG_FLASH_BASE
 176 #define CFG_MONITOR_LEN         (192 * 1024)    /* Reserve 196 kB for Monitor   */
 177 #define CFG_MALLOC_LEN          (128 * 1024)    /* Reserve 128 kB for malloc()  */
 178
 179 /*
 180  * For booting Linux, the board info and command line data
 181  * have to be in the first 8 MB of memory, since this is
 182  * the maximum mapped by the Linux kernel during initialization.
 183  */
 184 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 185 /*-----------------------------------------------------------------------
 186  * FLASH organization
 187  */
 188 #define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks           */
 189 #define CFG_MAX_FLASH_SECT      256     /* max number of sectors on one chip    */
 190
 191 #define CFG_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)      */
 192 #define CFG_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)      */
 193
 194 #define CFG_FLASH_WORD_SIZE     unsigned short  /* flash word size (width)      */
 195 #define CFG_FLASH_ADDR0         0x5555  /* 1st address for flash config cycles  */
 196 #define CFG_FLASH_ADDR1         0x2AAA  /* 2nd address for flash config cycles  */
 197 /*
 198  * The following defines are added for buggy IOP480 byte interface.
 199  * All other boards should use the standard values (CPCI405 etc.)
 200  */
 201 #define CFG_FLASH_READ0         0x0000  /* 0 is standard                        */
 202 #define CFG_FLASH_READ1         0x0001  /* 1 is standard                        */
 203 #define CFG_FLASH_READ2         0x0002  /* 2 is standard                        */
 204
 205 #define CFG_FLASH_EMPTY_INFO            /* print 'E' for empty sector on flinfo */
 206
 207 #if 0 /* Use NVRAM for environment variables */
 208 /*-----------------------------------------------------------------------
 209  * NVRAM organization
 210  */
 211 #define CFG_ENV_IS_IN_NVRAM     1       /* use NVRAM for environment vars       */
 212 #define CFG_ENV_SIZE            0x0ff8          /* Size of Environment vars     */
 213 #define CFG_ENV_ADDR            \
 214         (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-(CFG_ENV_SIZE+8))   /* Env  */
 215
 216 #else /* Use EEPROM for environment variables */
 217
 218 #define CFG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
 219 #define CFG_ENV_OFFSET          0x000   /* environment starts at the beginning of the EEPROM */
 220 #define CFG_ENV_SIZE            0x400   /* 1024 bytes may be used for env vars*/
 221                                    /* total size of a CAT24WC08 is 1024 bytes */
 222 #endif
 223
 224 #define CFG_NVRAM_BASE_ADDR     0xf0200000              /* NVRAM base address   */
 225 #define CFG_NVRAM_SIZE          (32*1024)               /* NVRAM size           */
 226
 227 /*-----------------------------------------------------------------------
 228  * I2C EEPROM (CAT24WC16) for environment
 229  */
 230 #define CONFIG_HARD_I2C                 /* I2c with hardware support */
 231 #define CFG_I2C_SPEED           400000  /* I2C speed and slave address */
 232 #define CFG_I2C_SLAVE           0x7F
 233
 234 #define CFG_I2C_EEPROM_ADDR     0x50    /* EEPROM CAT28WC08             */
 235 #define CFG_I2C_EEPROM_ADDR_LEN 1       /* Bytes of address             */
 236 /* mask of address bits that overflow into the "EEPROM chip address"    */
 237 #define CFG_I2C_EEPROM_ADDR_OVERFLOW    0x07
 238 #define CFG_EEPROM_PAGE_WRITE_BITS 4    /* The Catalyst CAT24WC08 has   */
 239                                         /* 16 byte page write mode using*/
 240                                         /* last 4 bits of the address   */
 241 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS  10   /* and takes up to 10 msec */
 242 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 243
 244 /*-----------------------------------------------------------------------
 245  * Cache Configuration
 246  */
 247 #define CFG_DCACHE_SIZE         8192    /* For IBM 405 CPUs                     */
 248 #define CFG_CACHELINE_SIZE      32      /* ...                  */
 249 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 250 #define CFG_CACHELINE_SHIFT     5       /* log base 2 of the above value        */
 251 #endif
 252
 253 /*
 254  * Init Memory Controller:
 255  *
 256  * BR0/1 and OR0/1 (FLASH)
 257  */
 258
 259 #define FLASH_BASE0_PRELIM      0xFFE00000      /* FLASH bank #0        */
 260
 261 /*-----------------------------------------------------------------------
 262  * External Bus Controller (EBC) Setup
 263  */
 264
 265 /* Memory Bank 0 (Flash Bank 0) initialization                                  */
 266 #define CFG_EBC_PB0AP           0x92015480
 267 #define CFG_EBC_PB0CR           0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 268
 269 /* Memory Bank 1 (NVRAM/RTC) initialization                                     */
 270 #define CFG_EBC_PB1AP           0x01005280  /* TWT=2,WBN=1,WBF=1,TH=1,SOR=1     */
 271 #define CFG_EBC_PB1CR           0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit  */
 272
 273 /* Memory Bank 2 (CAN0, 1) initialization                                       */
 274 #define CFG_EBC_PB2AP           0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 275 /*#define CFG_EBC_PB2AP           0x038056C0  / * BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 276 #define CFG_EBC_PB2CR           0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
 277
 278 /* Memory Bank 3 (FPGA internal) initialization                                 */
 279 #define CFG_EBC_PB3AP           0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 280 #define CFG_EBC_PB3CR           0xF041C000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=32bit */
 281 #define CFG_FPGA_BASE_ADDR      0xF0400000
 282
 283 /*-----------------------------------------------------------------------
 284  * FPGA stuff
 285  */
 286 /* FPGA internal regs */
 287 #define CFG_FPGA_MODE           0x00
 288 #define CFG_FPGA_STATUS         0x02
 289 #define CFG_FPGA_TS             0x04
 290 #define CFG_FPGA_TS_LOW         0x06
 291 #define CFG_FPGA_TS_CAP0        0x10
 292 #define CFG_FPGA_TS_CAP0_LOW    0x12
 293 #define CFG_FPGA_TS_CAP1        0x14
 294 #define CFG_FPGA_TS_CAP1_LOW    0x16
 295 #define CFG_FPGA_TS_CAP2        0x18
 296 #define CFG_FPGA_TS_CAP2_LOW    0x1a
 297 #define CFG_FPGA_TS_CAP3        0x1c
 298 #define CFG_FPGA_TS_CAP3_LOW    0x1e
 299
 300 /* FPGA Mode Reg */
 301 #define CFG_FPGA_MODE_CF_RESET  0x0001
 302 #define CFG_FPGA_MODE_TS_IRQ_ENABLE 0x0100
 303 #define CFG_FPGA_MODE_TS_IRQ_CLEAR  0x1000
 304 #define CFG_FPGA_MODE_TS_CLEAR  0x2000
 305
 306 /* FPGA Status Reg */
 307 #define CFG_FPGA_STATUS_DIP0    0x0001
 308 #define CFG_FPGA_STATUS_DIP1    0x0002
 309 #define CFG_FPGA_STATUS_DIP2    0x0004
 310 #define CFG_FPGA_STATUS_FLASH   0x0008
 311 #define CFG_FPGA_STATUS_TS_IRQ  0x1000
 312
 313 #define CFG_FPGA_SPARTAN2       1           /* using Xilinx Spartan 2 now    */
 314 #define CFG_FPGA_MAX_SIZE       32*1024     /* 32kByte is enough for XC2S15  */
 315
 316 /* FPGA program pin configuration */
 317 #define CFG_FPGA_PRG            0x04000000  /* FPGA program pin (ppc output) */
 318 #define CFG_FPGA_CLK            0x02000000  /* FPGA clk pin (ppc output)     */
 319 #define CFG_FPGA_DATA           0x01000000  /* FPGA data pin (ppc output)    */
 320 #define CFG_FPGA_INIT           0x00400000  /* FPGA init pin (ppc input)     */
 321 #define CFG_FPGA_DONE           0x00800000  /* FPGA done pin (ppc input)     */
 322
 323 /*-----------------------------------------------------------------------
 324  * Definitions for initial stack pointer and data area (in data cache)
 325  */
 326 #define CFG_INIT_DCACHE_CS      7       /* use cs # 7 for data cache memory    */
 327 #define CFG_INIT_RAM_ADDR       0x40000000  /* use data cache                  */
 328 #define CFG_INIT_RAM_END        0x2000  /* End of used area in RAM             */
 329 #define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
 330 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 331 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 332
 333 /*
 334  * Internal Definitions
 335  *
 336  * Boot Flags
 337  */
 338 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 339 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 340
 341 #endif  /* __CONFIG_H */