include/configs/QS860T.h

   1 /*
   2  * (C) Copyright 2003
   3  * MuLogic B.V.
   4  *
   5  * (C) Copyright 2002
   6  * Simple Network Magic Corporation
   7  *
   8  * (C) Copyright 2000
   9  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  10  *
  11  * See file CREDITS for list of people who contributed to this
  12  * project.
  13  *
  14  * This program is free software; you can redistribute it and/or
  15  * modify it under the terms of the GNU General Public License as
  16  * published by the Free Software Foundation; either version 2 of
  17  * the License, or (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, write to the Free Software
  26  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  27  * MA 02111-1307 USA
  28  */
  29
  30 /*
  31  * board/config.h - configuration options, board specific
  32  */
  33
  34 #ifndef __CONFIG_H
  35 #define __CONFIG_H
  36
  37 /* various debug settings */
  38 #undef CONFIG_SYS_DEVICE_NULLDEV                /* null device */
  39 #undef CONFIG_SILENT_CONSOLE            /* silent console */
  40 #undef CONFIG_SYS_CONSOLE_INFO_QUIET            /* silent console ? */
  41 #undef DEBUG_FLASH                      /* debug flash code */
  42 #undef FLASH_DEBUG                      /* debug fash code */
  43 #undef DEBUG_ENV                        /* debug environment code */
  44
  45 #define CONFIG_SYS_DIRECT_FLASH_TFTP    1       /* allow direct tftp to flash */
  46 #define CONFIG_ENV_OVERWRITE    1       /* allow overwrite MAC address */
  47
  48
  49 /*
  50  * High Level Configuration Options
  51  * (easy to change)
  52  */
  53
  54 #define CONFIG_MPC860           1       /* This is a MPC860 CPU */
  55 #define CONFIG_QS860T           1       /* ...on a QS860T module */
  56
  57 #define CONFIG_FEC_ENET         1       /* FEC 10/100BaseT ethernet */
  58 #define CONFIG_MII
  59 #define FEC_INTERRUPT           SIU_LEVEL1
  60 #undef CONFIG_SCC1_ENET                 /* SCC1 10BaseT ethernet */
  61 #define CONFIG_SYS_DISCOVER_PHY
  62
  63 #undef CONFIG_8xx_CONS_SMC1
  64 #define CONFIG_8xx_CONS_SMC2    1       /* Console is on SMC */
  65 #undef CONFIG_8xx_CONS_NONE
  66
  67 #define CONFIG_BAUDRATE         38400   /* console baudrate = 38.4kbps */
  68
  69 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds */
  70
  71 /* Pass clocks to Linux 2.4.18 in Hz */
  72 #undef CONFIG_CLOCKS_IN_MHZ             /* clocks passsed to Linux in MHz */
  73
  74 #define CONFIG_PREBOOT          "echo;" \
  75         "echo 'Type \\\"run flash_nfs\\\" to mount root filesystem over NFS';" \
  76         "echo"
  77
  78 #undef CONFIG_BOOTARGS
  79 /* TODO compare against CADM860 */
  80 #define CONFIG_BOOTCOMMAND      "bootp; " \
  81         "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
  82         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
  83         "bootm"
  84
  85 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
  86 #undef CONFIG_SYS_LOADS_BAUD_CHANGE             /* don't allow baudrate change */
  87
  88 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
  89
  90 #undef CONFIG_STATUS_LED                /* Status LED disabled */
  91
  92 #undef CONFIG_CAN_DRIVER                /* CAN Driver support disabled */
  93
  94 /*
  95  * BOOTP options
  96  */
  97 #define CONFIG_BOOTP_SUBNETMASK
  98 #define CONFIG_BOOTP_GATEWAY
  99 #define CONFIG_BOOTP_HOSTNAME
 100 #define CONFIG_BOOTP_BOOTPATH
 101 #define CONFIG_BOOTP_BOOTFILESIZE
 102
 103
 104 #define CONFIG_MAC_PARTITION
 105 #define CONFIG_DOS_PARTITION
 106
 107 #define CONFIG_RTC_MPC8xx       /* use internal RTC of MPC8xx */
 108
 109
 110 /*
 111  * Command line configuration.
 112  */
 113 #include <config_cmd_default.h>
 114
 115 #define CONFIG_CMD_REGINFO
 116 #define CONFIG_CMD_IMMAP
 117 #define CONFIG_CMD_ASKENV
 118 #define CONFIG_CMD_NET
 119 #define CONFIG_CMD_DHCP
 120 #define CONFIG_CMD_DATE
 121
 122
 123 /* TODO */
 124 #if 0
 125 /* Look at these */
 126 CONFIG_IPADDR
 127 CONFIG_SERVERIP
 128 CONFIG_I2C
 129 CONFIG_SPI
 130 #endif
 131
 132 /*
 133  * Environment variable storage is in NVRAM
 134  */
 135 #define CONFIG_ENV_IS_IN_NVRAM  1
 136 #define CONFIG_ENV_SIZE         0x00001000      /* We use only the last 4K for PPCBoot */
 137 #define CONFIG_ENV_ADDR         0xD100E000
 138
 139 /*
 140  * Miscellaneous configurable options
 141  */
 142 #define CONFIG_SYS_LONGHELP                             /* undef to save memory */
 143 #define CONFIG_SYS_PROMPT               "=> "           /* Monitor Command Prompt */
 144
 145 #define CONFIG_SYS_HUSH_PARSER          1               /* use "hush" command parser */
 146 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 147
 148 #if defined(CONFIG_CMD_KGDB)
 149 #define CONFIG_SYS_CBSIZE               1024            /* Console I/O Buffer Size */
 150 #else
 151 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size */
 152 #endif
 153 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 154 #define CONFIG_SYS_MAXARGS              16              /* max number of command args */
 155 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 156
 157 /* TODO - size? */
 158 #define CONFIG_SYS_MEMTEST_START        0x0400000       /* memtest works */
 159 #define CONFIG_SYS_MEMTEST_END          0x0C00000       /* 4 ... 12 MB in DRAM */
 160
 161 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 162
 163 #define CONFIG_SYS_HZ                   1000            /* decrementer freq: 1 ms ticks */
 164
 165 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 166
 167 /*-----------------------------------------------------------------------
 168  * Low Level Configuration Settings
 169  * (address mappings, register initial values, etc.)
 170  * You should know what you are doing if you make changes here.
 171  */
 172 /*-----------------------------------------------------------------------
 173  * Internal Memory Mapped Register
 174  */
 175 #define CONFIG_SYS_IMMR         0xF0000000
 176
 177 /*-----------------------------------------------------------------------
 178  * Definitions for initial stack pointer and data area (in DPRAM)
 179  */
 180 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 181 #define CONFIG_SYS_INIT_RAM_END 0x2F00          /* End of used area in DPRAM */
 182 #define CONFIG_SYS_GBL_DATA_SIZE        64              /* size in bytes reserved for initial data */
 183 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 184 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 185
 186 /*-----------------------------------------------------------------------
 187  * Start addresses for the final memory configuration
 188  * (Set up by the startup code)
 189  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 190  */
 191 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 192 #define CONFIG_SYS_FLASH_BASE           0xFFF00000
 193
 194 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)     /* Reserve 192 kB for Monitor */
 195 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 196 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc() */
 197
 198 /*
 199  * For booting Linux, the board info and command line data
 200  * have to be in the first 8 MB of memory, since this is
 201  * the maximum mapped by the Linux kernel during initialization.
 202  */
 203 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 204
 205 /* TODO flash parameters */
 206 /*-----------------------------------------------------------------------
 207  * FLASH organization for Intel Strataflash
 208  */
 209 #define CONFIG_SYS_FLASH_16BIT          1               /* 16-bit wide flash memory */
 210 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* max number of memory banks */
 211 #define CONFIG_SYS_MAX_FLASH_SECT       64              /* max number of sectors on one chip */
 212
 213 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000          /* Timeout for Flash Erase (in ms) */
 214 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Timeout for Flash Write (in ms) */
 215
 216 #undef  CONFIG_ENV_IS_IN_FLASH
 217
 218 /*-----------------------------------------------------------------------
 219  * Cache Configuration
 220  */
 221 #define CONFIG_SYS_CACHELINE_SIZE       16              /* For all MPC8xx CPUs */
 222 #if defined(CONFIG_CMD_KGDB)
 223 #define CONFIG_SYS_CACHELINE_SHIFT      4               /* log base 2 of the above value */
 224 #endif
 225
 226 /*-----------------------------------------------------------------------
 227  * SYPCR - System Protection Control 11-9
 228  * SYPCR can only be written once after reset!
 229  *-----------------------------------------------------------------------
 230  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 231  */
 232 #if defined(CONFIG_WATCHDOG)
 233 #define CONFIG_SYS_SYPCR        (0xFFFFFF88 | SYPCR_SWE | SYPCR_SWRI)
 234 #else
 235 #define CONFIG_SYS_SYPCR        0xFFFFFF88
 236 #endif
 237
 238 /*-----------------------------------------------------------------------
 239  * SIUMCR - SIU Module Configuration 11-6
 240  *-----------------------------------------------------------------------
 241  */
 242 #define CONFIG_SYS_SIUMCR       0x00620000
 243
 244 /*-----------------------------------------------------------------------
 245  * TBSCR - Time Base Status and Control 11-26
 246  *-----------------------------------------------------------------------
 247  */
 248 #define CONFIG_SYS_TBSCR        0x00C3
 249
 250 /*-----------------------------------------------------------------------
 251  * RTCSC - Real-Time Clock Status and Control Register 11-27
 252  *-----------------------------------------------------------------------
 253  */
 254 #define CONFIG_SYS_RTCSC        (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 255
 256 /*-----------------------------------------------------------------------
 257  * PISCR - Periodic Interrupt Status and Control 11-31
 258  *-----------------------------------------------------------------------
 259  */
 260 #define CONFIG_SYS_PISCR        0x0082
 261
 262 /*-----------------------------------------------------------------------
 263  * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
 264  *-----------------------------------------------------------------------
 265  */
 266 #define CONFIG_SYS_PLPRCR       0x0090D000
 267
 268 /*-----------------------------------------------------------------------
 269  * SCCR - System Clock and reset Control Register               15-27
 270  *-----------------------------------------------------------------------
 271  */
 272 #define SCCR_MASK       SCCR_EBDF11
 273 #define CONFIG_SYS_SCCR 0x02000000
 274
 275
 276 /*-----------------------------------------------------------------------
 277  * Debug Enable Register
 278  * 0x73E67C0F - All interrupts handled by BDM
 279  * 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM
 280  *-----------------------------------------------------------------------
 281 #define CONFIG_SYS_DER                  0x73E67C0F
 282 */
 283 #define CONFIG_SYS_DER                  0x0082400F
 284
 285
 286 /*-----------------------------------------------------------------------
 287  * Memory Controller Initialization Constants
 288  *-----------------------------------------------------------------------
 289  */
 290
 291 /*
 292  * BR0 and OR0 (AMD 512K Socketed FLASH)
 293  * Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation)
 294  */
 295 #define CONFIG_SYS_PRELIM_OR_AM
 296 #define CONFIG_SYS_OR_TIMING_FLASH
 297
 298 #define FLASH_BASE0_PRELIM      0xFFF00001
 299 #define CONFIG_SYS_OR0_PRELIM           0xFFF80D42
 300 #define CONFIG_SYS_BR0_PRELIM           0xFFF00401
 301
 302
 303 /*
 304  * BR1 and OR1 (Intel 8M StrataFLASH)
 305  * Base address = 0xD000_0000 - 0xD07F_FFFF
 306  */
 307
 308 #define FLASH_BASE1_PRELIM      0xD0000000
 309 #define CONFIG_SYS_OR1_PRELIM           0xFF800D42
 310 #define CONFIG_SYS_BR1_PRELIM           0xD0000801
 311 /* #define CONFIG_SYS_OR1               0xFF800D42 */
 312 /* #define CONFIG_SYS_BR1               0xD0000801 */
 313
 314
 315 /*
 316  * BR2 and OR2 (SDRAM)
 317  * Base Address = 0x00000000 - 0x00FF_FFFF (16M After relocation)
 318  * Base Address = 0x00000000 - 0x03FF_FFFF (64M After relocation)
 319  * Base Address = 0x00000000 - 0x07FF_FFFF (128M After relocation)
 320  *
 321  */
 322 #define SDRAM_BASE              0x00000000      /* SDRAM bank */
 323 #define SDRAM_PRELIM_OR_AM      0xF8000000      /* map max. 128 MB */
 324
 325 /* SDRAM timing */
 326 #define SDRAM_TIMING            0x00000A00
 327
 328 /* For boards with 16M of SDRAM */
 329 #define SDRAM_16M_MAX_SIZE      0x01000000      /* max 16MB SDRAM */
 330 #define CONFIG_SYS_16M_MBMR             0x18802114      /* Mem Periodic Timer Prescaler */
 331
 332 /* For boards with 64M of SDRAM */
 333 #define SDRAM_64M_MAX_SIZE      0x04000000      /* max 64MB SDRAM */
 334 /* TODO - determine real value */
 335 #define CONFIG_SYS_64M_MBMR             0x18802114      /* Mem Period Timer Prescaler */
 336
 337 #define CONFIG_SYS_OR2                  (SDRAM_PRELIM_OR_AM | SDRAM_TIMING)
 338 #define CONFIG_SYS_BR2                  (SDRAM_BASE | 0x000000C1)
 339
 340
 341 /*
 342  * BR3 and OR3 (NVRAM, Sipex, NAND Flash)
 343  * Base address = 0xD100_0000 - 0xD100_FFFF (64K NVRAM)
 344  * Base address = 0xD108_0000 - 0xD108_0000 (Sipex chip ctl register)
 345  * Base address = 0xD110_0000 - 0xD110_0000 (NAND ctl register)
 346  * Base address = 0xD138_0000 - 0xD138_0000 (LED ctl register)
 347  *
 348  */
 349
 350 #define CONFIG_SYS_OR3_PRELIM           0xFFC00DF6
 351 #define CONFIG_SYS_BR3_PRELIM           0xD1000401
 352 /* #define CONFIG_SYS_OR3               0xFFC00DF6 */
 353 /* #define CONFIG_SYS_BR3               0xD1000401 */
 354
 355
 356 /*
 357  * BR4 and OR4 (Unused)
 358  * Base address = 0xE000_0000 - 0xE3FF_FFFF
 359  *
 360  */
 361
 362 #define CONFIG_SYS_OR4_PRELIM           0xFF000000
 363 #define CONFIG_SYS_BR4_PRELIM           0xE0000000
 364 /* #define CONFIG_SYS_OR4               0xFF000000 */
 365 /* #define CONFIG_SYS_BR4               0xE0000000 */
 366
 367
 368 /*
 369  * BR5 and OR5 (Expansion bus)
 370  * Base address = 0xE400_0000 - 0xE7FF_FFFF
 371  *
 372  */
 373
 374 #define CONFIG_SYS_OR5_PRELIM           0xFF000000
 375 #define CONFIG_SYS_BR5_PRELIM           0xE4000000
 376 /* #define CONFIG_SYS_OR5               0xFF000000 */
 377 /* #define CONFIG_SYS_BR5               0xE4000000 */
 378
 379
 380 /*
 381  * BR6 and OR6 (Expansion bus)
 382  * Base address = 0xE800_0000 - 0xEBFF_FFFF
 383  *
 384  */
 385
 386 #define CONFIG_SYS_OR6_PRELIM           0xFF000000
 387 #define CONFIG_SYS_BR6_PRELIM           0xE8000000
 388 /* #define CONFIG_SYS_OR6               0xFF000000 */
 389 /* #define CONFIG_SYS_BR6               0xE8000000 */
 390
 391
 392 /*
 393  * BR7 and OR7 (Expansion bus)
 394  * Base address = 0xEC00_0000 - 0xEFFF_FFFF
 395  *
 396  */
 397
 398 #define CONFIG_SYS_OR7_PRELIM           0xFF000000
 399 #define CONFIG_SYS_BR7_PRELIM           0xE8000000
 400 /* #define CONFIG_SYS_OR7               0xFF000000 */
 401 /* #define CONFIG_SYS_BR7               0xE8000000 */
 402
 403
 404 /*
 405  * Internal Definitions
 406  *
 407  * Boot Flags
 408  */
 409 #define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH */
 410 #define BOOTFLAG_WARM           0x02    /* Software reboot */
 411
 412 /*
 413  * Sanity checks
 414  */
 415 #if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
 416 #error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
 417 #endif
 418
 419 #endif /* __CONFIG_H */