include/configs/R360MPI.h

   1 /*
   2  * (C) Copyright 2000-2005
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35
  36 #define CONFIG_MPC823           1       /* This is a MPC823 CPU         */
  37 #define CONFIG_R360MPI          1
  38
  39 #define CONFIG_SYS_TEXT_BASE    0x40000000
  40
  41 #define CONFIG_LCD
  42 #undef  CONFIG_EDT32F10
  43 #define CONFIG_SHARP_LQ057Q3DC02
  44
  45 #define CONFIG_SPLASH_SCREEN
  46
  47 #define MPC8XX_FACT             1               /* Multiply by 1        */
  48 #define MPC8XX_XIN              50000000        /* 50 MHz in            */
  49 #define CONFIG_8xx_GCLK_FREQ    50000000 /* define if can't use get_gclk_freq */
  50
  51 #define CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
  52 #undef  CONFIG_8xx_CONS_SMC2
  53 #undef  CONFIG_8xx_CONS_NONE
  54 #define CONFIG_BAUDRATE         115200  /* console baudrate in bps      */
  55 #if 0
  56 #define CONFIG_BOOTDELAY        0       /* immediate boot               */
  57 #else
  58 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  59 #endif
  60
  61 #define CONFIG_CLOCKS_IN_MHZ    1       /* clocks passsed to Linux in MHz */
  62
  63 #define CONFIG_PREBOOT  "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
  64
  65 #undef  CONFIG_BOOTARGS
  66 #define CONFIG_BOOTCOMMAND                                                      \
  67         "bootp; "                                                               \
  68         "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "     \
  69         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "   \
  70         "bootm"
  71
  72 #undef  CONFIG_SCC1_ENET
  73 #define CONFIG_SCC2_ENET
  74
  75 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  76 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE            /* don't allow baudrate change  */
  77
  78 #define CONFIG_MISC_INIT_R              /* have misc_init_r() function  */
  79
  80 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  81
  82 #define CONFIG_CAN_DRIVER               /* CAN Driver support enabled   */
  83
  84 /*
  85  * BOOTP options
  86  */
  87 #define CONFIG_BOOTP_SUBNETMASK
  88 #define CONFIG_BOOTP_GATEWAY
  89 #define CONFIG_BOOTP_HOSTNAME
  90 #define CONFIG_BOOTP_BOOTPATH
  91 #define CONFIG_BOOTP_BOOTFILESIZE
  92
  93 #define CONFIG_MAC_PARTITION
  94 #define CONFIG_DOS_PARTITION
  95
  96 #define CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
  97
  98 #define CONFIG_HARD_I2C         1       /* To I2C with hardware support */
  99 #undef CONFIG_SORT_I2C                  /* To I2C with software support */
 100 #define CONFIG_SYS_I2C_SPEED            4700    /* I2C speed and slave address */
 101 #define CONFIG_SYS_I2C_SLAVE            0x7F
 102
 103 /*
 104  * Software (bit-bang) I2C driver configuration
 105  */
 106 #define PB_SCL                  0x00000020      /* PB 26 */
 107 #define PB_SDA                  0x00000010      /* PB 27 */
 108
 109 #define I2C_INIT                (immr->im_cpm.cp_pbdir |=  PB_SCL)
 110 #define I2C_ACTIVE              (immr->im_cpm.cp_pbdir |=  PB_SDA)
 111 #define I2C_TRISTATE            (immr->im_cpm.cp_pbdir &= ~PB_SDA)
 112 #define I2C_READ                ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
 113 #define I2C_SDA(bit)            if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
 114                                 else    immr->im_cpm.cp_pbdat &= ~PB_SDA
 115 #define I2C_SCL(bit)            if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 116                                 else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 117 #define I2C_DELAY               udelay(50)
 118
 119 #define CONFIG_SYS_I2C_LCD_ADDR 0x8     /* LCD Control */
 120 #define CONFIG_SYS_I2C_KEY_ADDR 0x9     /* Keyboard coprocessor */
 121 #define CONFIG_SYS_I2C_TEM_ADDR 0x49    /* Temperature Sensors */
 122
 123
 124 /*
 125  * Command line configuration.
 126  */
 127 #include <config_cmd_default.h>
 128
 129 #define CONFIG_CMD_BMP
 130 #define CONFIG_CMD_BSP
 131 #define CONFIG_CMD_DATE
 132 #define CONFIG_CMD_DHCP
 133 #define CONFIG_CMD_I2C
 134 #define CONFIG_CMD_IDE
 135 #define CONFIG_CMD_JFFS2
 136 #define CONFIG_CMD_NFS
 137 #define CONFIG_CMD_PCMCIA
 138 #define CONFIG_CMD_SNTP
 139
 140
 141 /*
 142  * Miscellaneous configurable options
 143  */
 144 #define CONFIG_SYS_DEVICE_NULLDEV       1       /* we need the null device      */
 145 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1       /* must set console from env    */
 146
 147 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 148 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt       */
 149 #if defined(CONFIG_CMD_KGDB)
 150 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
 151 #else
 152 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size      */
 153 #endif
 154 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 155 #define CONFIG_SYS_MAXARGS      16              /* max number of command args   */
 156 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 157
 158 #define CONFIG_SYS_MEMTEST_START        0x0400000       /* memtest works on     */
 159 #define CONFIG_SYS_MEMTEST_END          0x0C00000       /* 4 ... 12 MB in DRAM  */
 160
 161 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 162
 163 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1 ms ticks */
 164
 165 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 166
 167 /*
 168  * JFFS2 partitions
 169  */
 170 /* No command line, one static partition
 171  * use all the space starting at offset 3MB*/
 172 #undef CONFIG_CMD_MTDPARTS
 173 #define CONFIG_JFFS2_DEV                "nor0"
 174 #define CONFIG_JFFS2_PART_SIZE          0xFFFFFFFF
 175 #define CONFIG_JFFS2_PART_OFFSET        0x00300000
 176
 177 /* mtdparts command line support */
 178 /*
 179 #define CONFIG_CMD_MTDPARTS
 180 #define MTDIDS_DEFAULT          "nor0=r360-0"
 181 #define MTDPARTS_DEFAULT        "mtdparts=r360-0:-@3m(user)"
 182 */
 183
 184 /*
 185  * Low Level Configuration Settings
 186  * (address mappings, register initial values, etc.)
 187  * You should know what you are doing if you make changes here.
 188  */
 189 /*-----------------------------------------------------------------------
 190  * Internal Memory Mapped Register
 191  */
 192 #define CONFIG_SYS_IMMR         0xFF000000
 193
 194 /*-----------------------------------------------------------------------
 195  * Definitions for initial stack pointer and data area (in DPRAM)
 196  */
 197 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 198 #define CONFIG_SYS_INIT_RAM_SIZE        0x2F00  /* Size of used area in DPRAM   */
 199 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 200 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 201
 202 /*-----------------------------------------------------------------------
 203  * Start addresses for the final memory configuration
 204  * (Set up by the startup code)
 205  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 206  */
 207 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 208 #define CONFIG_SYS_FLASH_BASE           0x40000000
 209 #if defined(DEBUG)
 210 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor   */
 211 #else
 212 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)     /* Reserve 192 kB for Monitor   */
 213 #endif
 214 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 215 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
 216
 217 /*
 218  * For booting Linux, the board info and command line data
 219  * have to be in the first 8 MB of memory, since this is
 220  * the maximum mapped by the Linux kernel during initialization.
 221  */
 222 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 223
 224 /*-----------------------------------------------------------------------
 225  * FLASH organization
 226  */
 227 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
 228 #define CONFIG_SYS_MAX_FLASH_SECT       128     /* max number of sectors on one chip    */
 229
 230 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 231 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
 232
 233 #define CONFIG_ENV_IS_IN_FLASH  1
 234 #define CONFIG_ENV_OFFSET               0x40000 /* Offset of Environment                */
 235 #define CONFIG_ENV_SECT_SIZE    0x20000 /* Total Size of Environment sector     */
 236 #define CONFIG_ENV_SIZE         0x4000  /* Used Size of Environment sector      */
 237 #define CONFIG_SYS_USE_PPCENV                   /* Environment embedded in sect .ppcenv */
 238
 239 /*-----------------------------------------------------------------------
 240  * Cache Configuration
 241  */
 242 #define CONFIG_SYS_CACHELINE_SIZE       16      /* For all MPC8xx CPUs                  */
 243 #if defined(CONFIG_CMD_KGDB)
 244 #define CONFIG_SYS_CACHELINE_SHIFT      4       /* log base 2 of the above value        */
 245 #endif
 246
 247 /*-----------------------------------------------------------------------
 248  * SYPCR - System Protection Control                            11-9
 249  * SYPCR can only be written once after reset!
 250  *-----------------------------------------------------------------------
 251  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 252  */
 253 #if defined(CONFIG_WATCHDOG)
 254 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 255                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 256 #else
 257 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 258 #endif
 259
 260 /*-----------------------------------------------------------------------
 261  * SIUMCR - SIU Module Configuration                            11-6
 262  *-----------------------------------------------------------------------
 263  * PCMCIA config., multi-function pin tri-state
 264  */
 265 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 266
 267 /*-----------------------------------------------------------------------
 268  * TBSCR - Time Base Status and Control                         11-26
 269  *-----------------------------------------------------------------------
 270  * Clear Reference Interrupt Status, Timebase freezing enabled
 271  */
 272 #define CONFIG_SYS_TBSCR        (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
 273
 274 /*-----------------------------------------------------------------------
 275  * RTCSC - Real-Time Clock Status and Control Register          11-27
 276  *-----------------------------------------------------------------------
 277  */
 278 #define CONFIG_SYS_RTCSC        (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 279
 280 /*-----------------------------------------------------------------------
 281  * PISCR - Periodic Interrupt Status and Control                11-31
 282  *-----------------------------------------------------------------------
 283  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 284  */
 285 #define CONFIG_SYS_PISCR        (PISCR_PS | PISCR_PITF)
 286
 287 /*-----------------------------------------------------------------------
 288  * PLPRCR - PLL, Low-Power, and Reset Control Register          15-30
 289  *-----------------------------------------------------------------------
 290  * Reset PLL lock status sticky bit, timer expired status bit and timer
 291  * interrupt status bit
 292  *
 293  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
 294  */
 295 #ifdef  CONFIG_80MHz    /* for 80 MHz, we use a 16 MHz clock * 5 */
 296 #define CONFIG_SYS_PLPRCR                                                       \
 297                 ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
 298 #else                   /* up to 50 MHz we use a 1:1 clock */
 299 #define CONFIG_SYS_PLPRCR       (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 300 #endif  /* CONFIG_80MHz */
 301
 302 /*-----------------------------------------------------------------------
 303  * SCCR - System Clock and reset Control Register               15-27
 304  *-----------------------------------------------------------------------
 305  * Set clock output, timebase and RTC source and divider,
 306  * power management and some other internal clocks
 307  */
 308 #define SCCR_MASK       SCCR_EBDF11
 309 #define CONFIG_SYS_SCCR (SCCR_TBS     | \
 310                          SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 311                          SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 312                          SCCR_DFALCD00)
 313
 314 /*-----------------------------------------------------------------------
 315  * PCMCIA stuff
 316  *-----------------------------------------------------------------------
 317  *
 318  */
 319 #define CONFIG_SYS_PCMCIA_MEM_ADDR      (0xE0000000)
 320 #define CONFIG_SYS_PCMCIA_MEM_SIZE      ( 64 << 20 )
 321 #define CONFIG_SYS_PCMCIA_DMA_ADDR      (0xE4000000)
 322 #define CONFIG_SYS_PCMCIA_DMA_SIZE      ( 64 << 20 )
 323 #define CONFIG_SYS_PCMCIA_ATTRB_ADDR    (0xE8000000)
 324 #define CONFIG_SYS_PCMCIA_ATTRB_SIZE    ( 64 << 20 )
 325 #define CONFIG_SYS_PCMCIA_IO_ADDR       (0xEC000000)
 326 #define CONFIG_SYS_PCMCIA_IO_SIZE       ( 64 << 20 )
 327
 328 /*-----------------------------------------------------------------------
 329  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 330  *-----------------------------------------------------------------------
 331  */
 332
 333 #if 1
 334 #define CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 335
 336 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 337 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 338 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 339
 340 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 341 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
 342
 343 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 344
 345 #define CONFIG_SYS_ATA_BASE_ADDR        CONFIG_SYS_PCMCIA_MEM_ADDR
 346
 347 /* Offset for data I/O                  */
 348 #define CONFIG_SYS_ATA_DATA_OFFSET      (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 349
 350 /* Offset for normal register accesses  */
 351 #define CONFIG_SYS_ATA_REG_OFFSET       (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 352
 353 /* Offset for alternate registers       */
 354 #define CONFIG_SYS_ATA_ALT_OFFSET       0x0100
 355 #endif
 356
 357 /*-----------------------------------------------------------------------
 358  *
 359  *-----------------------------------------------------------------------
 360  *
 361  */
 362 #define CONFIG_SYS_DER  0
 363
 364 /*
 365  * Init Memory Controller:
 366  *
 367  * BR0/1 and OR0/1 (FLASH)
 368  */
 369
 370 #define FLASH_BASE0_PRELIM      0x40000000      /* FLASH bank #0        */
 371
 372 /* used to re-map FLASH both when starting from SRAM or FLASH:
 373  * restrict access enough to keep SRAM working (if any)
 374  * but not too much to meddle with FLASH accesses
 375  */
 376 #define CONFIG_SYS_REMAP_OR_AM          0x80000000      /* OR addr mask */
 377 #define CONFIG_SYS_PRELIM_OR_AM 0xFF000000      /* OR addr mask */
 378
 379 /*
 380  * FLASH timing:
 381  */
 382 #define CONFIG_SYS_OR_TIMING_FLASH      (OR_ACS_DIV1 | OR_SCY_7_CLK | OR_BI)
 383
 384 #define CONFIG_SYS_OR0_REMAP    (CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
 385 #define CONFIG_SYS_OR0_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 386 #define CONFIG_SYS_BR0_PRELIM   ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 387
 388
 389 /*
 390  * BR2 and OR2 (SDRAM)
 391  *
 392  */
 393 #define SDRAM_BASE2_PRELIM      0x00000000      /* SDRAM bank #0        */
 394 #define SDRAM_MAX_SIZE          0x04000000      /* max 64 MB per bank   */
 395
 396 #define CONFIG_SYS_PRELIM_OR2_AM        0xF8000000      /* OR addr mask */
 397
 398 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)      */
 399 #define CONFIG_SYS_OR_TIMING_SDRAM      (OR_ACS_DIV1  | OR_CSNT_SAM | \
 400                                  OR_SCY_0_CLK | OR_G5LS)
 401
 402 #define CONFIG_SYS_OR2_PRELIM   (CONFIG_SYS_PRELIM_OR2_AM | CONFIG_SYS_OR_TIMING_SDRAM )
 403 #define CONFIG_SYS_BR2_PRELIM   ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 404
 405 /*
 406  * BR3 and OR3 (CAN Controller)
 407  */
 408 #ifdef CONFIG_CAN_DRIVER
 409 #define CONFIG_SYS_CAN_BASE             0xC0000000      /* CAN base address   */
 410 #define CONFIG_SYS_CAN_OR_AM            0xFFFF8000      /* 32 kB address mask */
 411 #define CONFIG_SYS_OR3_CAN              (CONFIG_SYS_CAN_OR_AM | OR_G5LA |OR_BI)
 412 #define CONFIG_SYS_BR3_CAN              ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 413                                  BR_PS_8 | BR_MS_UPMB | BR_V)
 414 #endif  /* CONFIG_CAN_DRIVER */
 415
 416
 417 /*
 418  * Memory Periodic Timer Prescaler
 419  *
 420  * The Divider for PTA (refresh timer) configuration is based on an
 421  * example SDRAM configuration (64 MBit, one bank). The adjustment to
 422  * the number of chip selects (NCS) and the actually needed refresh
 423  * rate is done by setting MPTPR.
 424  *
 425  * PTA is calculated from
 426  *      PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
 427  *
 428  *      gclk      CPU clock (not bus clock!)
 429  *      Trefresh  Refresh cycle * 4 (four word bursts used)
 430  *
 431  * 4096  Rows from SDRAM example configuration
 432  * 1000  factor s -> ms
 433  *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
 434  *    4  Number of refresh cycles per period
 435  *   64  Refresh cycle in ms per number of rows
 436  * --------------------------------------------
 437  * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
 438  *
 439  * 50 MHz => 50.000.000 / Divider =  98
 440  * 66 Mhz => 66.000.000 / Divider = 129
 441  * 80 Mhz => 80.000.000 / Divider = 156
 442  */
 443 #if   defined(CONFIG_80MHz)
 444 #define CONFIG_SYS_MAMR_PTA             156
 445 #elif defined(CONFIG_66MHz)
 446 #define CONFIG_SYS_MAMR_PTA             129
 447 #else           /*   50 MHz */
 448 #define CONFIG_SYS_MAMR_PTA              98
 449 #endif  /*CONFIG_??MHz */
 450
 451 /*
 452  * For 16 MBit, refresh rates could be 31.3 us
 453  * (= 64 ms / 2K = 125 / quad bursts).
 454  * For a simpler initialization, 15.6 us is used instead.
 455  *
 456  * #define CONFIG_SYS_MPTPR_2BK_2K      MPTPR_PTP_DIV32         for 2 banks
 457  * #define CONFIG_SYS_MPTPR_1BK_2K      MPTPR_PTP_DIV64         for 1 bank
 458  */
 459 #define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16         /* setting for 2 banks  */
 460 #define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32         /* setting for 1 bank   */
 461
 462 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit         */
 463 #define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8          /* setting for 2 banks  */
 464 #define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16         /* setting for 1 bank   */
 465
 466 /*
 467  * MAMR settings for SDRAM
 468  */
 469
 470 /* 8 column SDRAM */
 471 #define CONFIG_SYS_MAMR_8COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 472                          MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |   \
 473                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 474 /* 9 column SDRAM */
 475 #define CONFIG_SYS_MAMR_9COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 476                          MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
 477                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 478
 479 #endif  /* __CONFIG_H */