include/configs/SM850.h

   1 /*
   2  * (C) Copyright 2000-2008
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 #undef TQM8xxL_80MHz    /*      1       / * define for 80 MHz CPU only  */
  32
  33 /*
  34  * High Level Configuration Options
  35  * (easy to change)
  36  */
  37
  38 #define CONFIG_MPC850           1       /* This is a MPC850 CPU         */
  39 #define CONFIG_SM850            1       /*...on a MPC850 Service Module */
  40
  41 #define CONFIG_SYS_TEXT_BASE    0x40000000
  42
  43 #define CONFIG_8xx_CONS_SMC2    1       /* Console is on SMC2           */
  44 #define CONFIG_SYS_SMC_RXBUFLEN 128
  45 #define CONFIG_SYS_MAXIDLE      10
  46 #define CONFIG_BAUDRATE         115200
  47 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  48
  49 #define CONFIG_CLOCKS_IN_MHZ    1       /* clocks passsed to Linux in MHz */
  50
  51 #define CONFIG_BOARD_TYPES      1       /* support board types          */
  52
  53 #undef  CONFIG_BOOTARGS
  54 #define CONFIG_BOOTCOMMAND                                                      \
  55         "bootp; "                                                               \
  56         "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "     \
  57         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "   \
  58         "bootm"
  59
  60 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  61 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE            /* don't allow baudrate change  */
  62
  63 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  64
  65 #undef  CONFIG_STATUS_LED               /* Status LED not enabled       */
  66
  67 #undef  CONFIG_CAN_DRIVER               /* CAN Driver support disabled  */
  68
  69 /*
  70  * BOOTP options
  71  */
  72 #define CONFIG_BOOTP_SUBNETMASK
  73 #define CONFIG_BOOTP_GATEWAY
  74 #define CONFIG_BOOTP_HOSTNAME
  75 #define CONFIG_BOOTP_BOOTPATH
  76 #define CONFIG_BOOTP_BOOTFILESIZE
  77
  78
  79 #define CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
  80
  81
  82 /*
  83  * Command line configuration.
  84  */
  85 #include <config_cmd_default.h>
  86
  87 #define CONFIG_CMD_DHCP
  88 #define CONFIG_CMD_DATE
  89
  90
  91 /*
  92  * Miscellaneous configurable options
  93  */
  94 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
  95 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt       */
  96 #if defined(CONFIG_CMD_KGDB) && defined(KGDB_DEBUG)
  97 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
  98 #else
  99 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size      */
 100 #endif
 101 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 102 #define CONFIG_SYS_MAXARGS      16              /* max number of command args   */
 103 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 104
 105 #define CONFIG_SYS_MEMTEST_START        0x0400000       /* memtest works on     */
 106 #define CONFIG_SYS_MEMTEST_END          0x0C00000       /* 4 ... 12 MB in DRAM  */
 107
 108 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 109
 110 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1 ms ticks */
 111
 112 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 113
 114 /*
 115  * Low Level Configuration Settings
 116  * (address mappings, register initial values, etc.)
 117  * You should know what you are doing if you make changes here.
 118  */
 119 /*-----------------------------------------------------------------------
 120  * Internal Memory Mapped Register
 121  */
 122 #define CONFIG_SYS_IMMR         0xFFF00000
 123
 124 /*-----------------------------------------------------------------------
 125  * Definitions for initial stack pointer and data area (in DPRAM)
 126  */
 127 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 128 #define CONFIG_SYS_INIT_RAM_SIZE        0x2F00  /* Size of used area in DPRAM   */
 129 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 130 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 131
 132 /*-----------------------------------------------------------------------
 133  * Start addresses for the final memory configuration
 134  * (Set up by the startup code)
 135  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 136  */
 137 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 138 #define CONFIG_SYS_FLASH_BASE           0x40000000
 139 #if defined(DEBUG)
 140 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor   */
 141 #else
 142 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)     /* Reserve 192 kB for Monitor   */
 143 #endif
 144 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 145 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
 146
 147 /*
 148  * For booting Linux, the board info and command line data
 149  * have to be in the first 8 MB of memory, since this is
 150  * the maximum mapped by the Linux kernel during initialization.
 151  */
 152 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 153
 154 /*-----------------------------------------------------------------------
 155  * FLASH organization
 156  */
 157 /* use CFI flash driver */
 158 #define CONFIG_SYS_FLASH_CFI            1       /* Flash is CFI conformant */
 159 #define CONFIG_FLASH_CFI_DRIVER 1       /* Use the common driver */
 160 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE+flash_info[0].size }
 161 #define CONFIG_SYS_FLASH_EMPTY_INFO
 162 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
 163 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks           */
 164 #define CONFIG_SYS_MAX_FLASH_SECT       71      /* max number of sectors on one chip */
 165
 166 #define CONFIG_ENV_IS_IN_FLASH  1
 167 #define CONFIG_ENV_OFFSET       0x8000  /*   Offset   of Environment Sector     */
 168 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector     */
 169
 170 #define CONFIG_MISC_INIT_R              /* Make sure to remap flashes correctly */
 171
 172 /*-----------------------------------------------------------------------
 173  * Hardware Information Block
 174  */
 175 #define CONFIG_SYS_HWINFO_OFFSET        0x0003FFC0      /* offset of HW Info block */
 176 #define CONFIG_SYS_HWINFO_SIZE          0x00000040      /* size   of HW Info block */
 177 #define CONFIG_SYS_HWINFO_MAGIC 0x54514D38      /* 'TQM8' */
 178
 179 /*-----------------------------------------------------------------------
 180  * Cache Configuration
 181  */
 182 #define CONFIG_SYS_CACHELINE_SIZE       16      /* For all MPC8xx CPUs                  */
 183 #if defined(CONFIG_CMD_KGDB)
 184 #define CONFIG_SYS_CACHELINE_SHIFT      4       /* log base 2 of the above value        */
 185 #endif
 186
 187 /*-----------------------------------------------------------------------
 188  * SYPCR - System Protection Control                            11-9
 189  * SYPCR can only be written once after reset!
 190  *-----------------------------------------------------------------------
 191  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 192  */
 193 #if defined(CONFIG_WATCHDOG)
 194 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 195                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 196 #else
 197 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 198 #endif
 199
 200 /*-----------------------------------------------------------------------
 201  * SIUMCR - SIU Module Configuration                            11-6
 202  *-----------------------------------------------------------------------
 203  * PCMCIA config., multi-function pin tri-state
 204  */
 205 #ifndef CONFIG_CAN_DRIVER
 206 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 207 #else   /* we must activate GPL5 in the SIUMCR for CAN */
 208 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 209 #endif  /* CONFIG_CAN_DRIVER */
 210
 211 /*-----------------------------------------------------------------------
 212  * TBSCR - Time Base Status and Control                         11-26
 213  *-----------------------------------------------------------------------
 214  * Clear Reference Interrupt Status, Timebase freezing enabled
 215  */
 216 #define CONFIG_SYS_TBSCR        (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 217
 218 /*-----------------------------------------------------------------------
 219  * RTCSC - Real-Time Clock Status and Control Register          11-27
 220  *-----------------------------------------------------------------------
 221  */
 222 #define CONFIG_SYS_RTCSC        (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 223
 224 /*-----------------------------------------------------------------------
 225  * PISCR - Periodic Interrupt Status and Control                11-31
 226  *-----------------------------------------------------------------------
 227  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 228  */
 229 #define CONFIG_SYS_PISCR        (PISCR_PS | PISCR_PITF)
 230
 231 /*-----------------------------------------------------------------------
 232  * PLPRCR - PLL, Low-Power, and Reset Control Register          15-30
 233  *-----------------------------------------------------------------------
 234  * Reset PLL lock status sticky bit, timer expired status bit and timer
 235  * interrupt status bit
 236  *
 237  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
 238  */
 239 #ifdef TQM8xxL_80MHz    /* for 80 MHz, we use a 16 MHz clock * 5 */
 240 #define CONFIG_SYS_PLPRCR                                                       \
 241                 ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
 242 #else
 243 #define CONFIG_SYS_PLPRCR       (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 244 #endif  /* TQM8xxL_80MHz */
 245
 246 /*-----------------------------------------------------------------------
 247  * SCCR - System Clock and reset Control Register               15-27
 248  *-----------------------------------------------------------------------
 249  * Set clock output, timebase and RTC source and divider,
 250  * power management and some other internal clocks
 251  */
 252 #define SCCR_MASK       SCCR_EBDF11
 253 #ifdef TQM8xxL_80MHz    /* for 80 MHz, we use a 16 MHz clock * 5 */
 254 #define CONFIG_SYS_SCCR (/* SCCR_TBS  | */ \
 255                          SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 256                          SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 257                          SCCR_DFALCD00)
 258 #else                   /* up to 50 MHz we use a 1:1 clock */
 259 #define CONFIG_SYS_SCCR (SCCR_TBS     | \
 260                          SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 261                          SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 262                          SCCR_DFALCD00)
 263 #endif  /* TQM8xxL_80MHz */
 264
 265 /*-----------------------------------------------------------------------
 266  * PCMCIA stuff
 267  *-----------------------------------------------------------------------
 268  *
 269  */
 270 #define CONFIG_SYS_PCMCIA_MEM_ADDR      (0xE0000000)
 271 #define CONFIG_SYS_PCMCIA_MEM_SIZE      ( 64 << 20 )
 272 #define CONFIG_SYS_PCMCIA_DMA_ADDR      (0xE4000000)
 273 #define CONFIG_SYS_PCMCIA_DMA_SIZE      ( 64 << 20 )
 274 #define CONFIG_SYS_PCMCIA_ATTRB_ADDR    (0xE8000000)
 275 #define CONFIG_SYS_PCMCIA_ATTRB_SIZE    ( 64 << 20 )
 276 #define CONFIG_SYS_PCMCIA_IO_ADDR       (0xEC000000)
 277 #define CONFIG_SYS_PCMCIA_IO_SIZE       ( 64 << 20 )
 278
 279 /*-----------------------------------------------------------------------
 280  *
 281  *-----------------------------------------------------------------------
 282  *
 283  */
 284 #define CONFIG_SYS_DER  0
 285
 286 /*
 287  * Init Memory Controller:
 288  *
 289  * BR0/1 and OR0/1 (FLASH)
 290  */
 291
 292 #define FLASH_BASE0_PRELIM      0x40000000      /* FLASH bank #0        */
 293 #define FLASH_BASE1_PRELIM      0x60000000      /* FLASH bank #0        */
 294
 295 /* used to re-map FLASH both when starting from SRAM or FLASH:
 296  * restrict access enough to keep SRAM working (if any)
 297  * but not too much to meddle with FLASH accesses
 298  */
 299 #define CONFIG_SYS_REMAP_OR_AM          0x80000000      /* OR addr mask */
 300 #define CONFIG_SYS_PRELIM_OR_AM 0xE0000000      /* OR addr mask */
 301
 302 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1        */
 303 #define CONFIG_SYS_OR_TIMING_FLASH      (OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
 304                                  OR_SCY_5_CLK | OR_EHTR)
 305
 306 #define CONFIG_SYS_OR0_REMAP    (CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
 307 #define CONFIG_SYS_OR0_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 308 #define CONFIG_SYS_BR0_PRELIM   ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 309
 310 #define CONFIG_SYS_OR1_REMAP    CONFIG_SYS_OR0_REMAP
 311 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 312 #define CONFIG_SYS_BR1_PRELIM   ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 313
 314 /*
 315  * BR2/3 and OR2/3 (SDRAM)
 316  *
 317  */
 318 #define SDRAM_BASE2_PRELIM      0x00000000      /* SDRAM bank #0        */
 319 #define SDRAM_BASE3_PRELIM      0x20000000      /* SDRAM bank #1        */
 320 #define SDRAM_MAX_SIZE          0x04000000      /* max 64 MB per bank   */
 321
 322 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)      */
 323 #define CONFIG_SYS_OR_TIMING_SDRAM      0x00000A00
 324
 325 #define CONFIG_SYS_OR2_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
 326 #define CONFIG_SYS_BR2_PRELIM   ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 327
 328 #ifndef CONFIG_CAN_DRIVER
 329 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 330 #define CONFIG_SYS_BR3_PRELIM   ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 331 #else   /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
 332 #define CONFIG_SYS_CAN_BASE             0xC0000000      /* CAN mapped at 0xC0000000     */
 333 #define CONFIG_SYS_CAN_OR_AM            0xFFFF8000      /* 32 kB address mask           */
 334 #define CONFIG_SYS_OR3_CAN              (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
 335 #define CONFIG_SYS_BR3_CAN              ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 336                                         BR_PS_8 | BR_MS_UPMB | BR_V )
 337 #endif  /* CONFIG_CAN_DRIVER */
 338
 339 /*
 340  * Memory Periodic Timer Prescaler
 341  */
 342
 343 /* periodic timer for refresh */
 344 #define CONFIG_SYS_MAMR_PTA     97              /* start with divider for 100 MHz       */
 345
 346 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit     */
 347 #define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16         /* setting for 2 banks  */
 348 #define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32         /* setting for 1 bank   */
 349
 350 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit         */
 351 #define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8          /* setting for 2 banks  */
 352 #define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16         /* setting for 1 bank   */
 353
 354 /*
 355  * MAMR settings for SDRAM
 356  */
 357
 358 /* 8 column SDRAM */
 359 #define CONFIG_SYS_MAMR_8COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 360                          MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |   \
 361                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 362 /* 9 column SDRAM */
 363 #define CONFIG_SYS_MAMR_9COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 364                          MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
 365                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 366
 367 /* pass open firmware flat tree */
 368 #define CONFIG_OF_LIBFDT        1
 369 #define CONFIG_OF_BOARD_SETUP   1
 370 #define CONFIG_HWCONFIG         1
 371
 372 #endif  /* __CONFIG_H */