include/configs/T1040QDS.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 /*
  27  * T1040 QDS board configuration file
  28  */
  29 #define CONFIG_T1040QDS
  30 #define CONFIG_PHYS_64BIT
  31
  32 #ifdef CONFIG_RAMBOOT_PBL
  33 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  34 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  35 #endif
  36
  37 /* High Level Configuration Options */
  38 #define CONFIG_BOOKE
  39 #define CONFIG_E500                     /* BOOKE e500 family */
  40 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  41 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  42 #define CONFIG_MPC85xx                  /* MPC85xx/PQ3 platform */
  43 #define CONFIG_MP                       /* support multiple processors */
  44
  45 #ifndef CONFIG_SYS_TEXT_BASE
  46 #define CONFIG_SYS_TEXT_BASE    0xeff80000
  47 #endif
  48
  49 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  50 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  51 #endif
  52
  53 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  54 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  55 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  56 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  57 #define CONFIG_PCI_INDIRECT_BRIDGE
  58 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  59 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  60 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  61 #define CONFIG_PCIE4                    /* PCIE controler 4 */
  62
  63 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  64 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  65
  66 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  67
  68 #define CONFIG_ENV_OVERWRITE
  69
  70 #ifdef CONFIG_SYS_NO_FLASH
  71 #define CONFIG_ENV_IS_NOWHERE
  72 #else
  73 #define CONFIG_FLASH_CFI_DRIVER
  74 #define CONFIG_SYS_FLASH_CFI
  75 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  76 #endif
  77
  78 #ifndef CONFIG_SYS_NO_FLASH
  79 #if defined(CONFIG_SPIFLASH)
  80 #define CONFIG_SYS_EXTRA_ENV_RELOC
  81 #define CONFIG_ENV_IS_IN_SPI_FLASH
  82 #define CONFIG_ENV_SPI_BUS              0
  83 #define CONFIG_ENV_SPI_CS               0
  84 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  85 #define CONFIG_ENV_SPI_MODE             0
  86 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  87 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  88 #define CONFIG_ENV_SECT_SIZE            0x10000
  89 #elif defined(CONFIG_SDCARD)
  90 #define CONFIG_SYS_EXTRA_ENV_RELOC
  91 #define CONFIG_ENV_IS_IN_MMC
  92 #define CONFIG_SYS_MMC_ENV_DEV          0
  93 #define CONFIG_ENV_SIZE                 0x2000
  94 #define CONFIG_ENV_OFFSET               (512 * 1105)
  95 #elif defined(CONFIG_NAND)
  96 #define CONFIG_SYS_EXTRA_ENV_RELOC
  97 #define CONFIG_ENV_IS_IN_NAND
  98 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
  99 #define CONFIG_ENV_OFFSET               (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 100 #else
 101 #define CONFIG_ENV_IS_IN_FLASH
 102 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 103 #define CONFIG_ENV_SIZE         0x2000
 104 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 105 #endif
 106 #else /* CONFIG_SYS_NO_FLASH */
 107 #define CONFIG_ENV_SIZE                0x2000
 108 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 109 #endif
 110
 111 #ifndef __ASSEMBLY__
 112 unsigned long get_board_sys_clk(void);
 113 unsigned long get_board_ddr_clk(void);
 114 #endif
 115
 116 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 117 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 118
 119 /*
 120  * These can be toggled for performance analysis, otherwise use default.
 121  */
 122 #define CONFIG_SYS_CACHE_STASHING
 123 #define CONFIG_BACKSIDE_L2_CACHE
 124 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 125 #define CONFIG_BTB                      /* toggle branch predition */
 126 #define CONFIG_DDR_ECC
 127 #ifdef CONFIG_DDR_ECC
 128 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 129 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 130 #endif
 131
 132 #define CONFIG_ENABLE_36BIT_PHYS
 133
 134 #define CONFIG_ADDR_MAP
 135 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 136
 137 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 138 #define CONFIG_SYS_MEMTEST_END          0x00400000
 139 #define CONFIG_SYS_ALT_MEMTEST
 140 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 141
 142 /*
 143  *  Config the L3 Cache as L3 SRAM
 144  */
 145 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 146
 147 #define CONFIG_SYS_DCSRBAR              0xf0000000
 148 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 149
 150 /* EEPROM */
 151 #define CONFIG_ID_EEPROM
 152 #define CONFIG_SYS_I2C_EEPROM_NXID
 153 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 154 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 155 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 156 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 157 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 158
 159 /*
 160  * DDR Setup
 161  */
 162 #define CONFIG_VERY_BIG_RAM
 163 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 164 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 165
 166 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 167 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 168 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 169
 170 #define CONFIG_DDR_SPD
 171 #define CONFIG_FSL_DDR3
 172 #define CONFIG_FSL_DDR_INTERACTIVE
 173
 174 #define CONFIG_SYS_SPD_BUS_NUM  0
 175 #define SPD_EEPROM_ADDRESS      0x51
 176
 177 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 178
 179 /*
 180  * IFC Definitions
 181  */
 182 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 183 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 184
 185 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 186 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 187                                 + 0x8000000) | \
 188                                 CSPR_PORT_SIZE_16 | \
 189                                 CSPR_MSEL_NOR | \
 190                                 CSPR_V)
 191 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 192 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 193                                 CSPR_PORT_SIZE_16 | \
 194                                 CSPR_MSEL_NOR | \
 195                                 CSPR_V)
 196 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 197 /* NOR Flash Timing Params */
 198 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 199 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 200                                 FTIM0_NOR_TEADC(0x5) | \
 201                                 FTIM0_NOR_TEAHC(0x5))
 202 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 203                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 204                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 205 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 206                                 FTIM2_NOR_TCH(0x4) | \
 207                                 FTIM2_NOR_TWPH(0x0E) | \
 208                                 FTIM2_NOR_TWP(0x1c))
 209 #define CONFIG_SYS_NOR_FTIM3    0x0
 210
 211 #define CONFIG_SYS_FLASH_QUIET_TEST
 212 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 213
 214 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 215 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 216 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 217 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 218
 219 #define CONFIG_SYS_FLASH_EMPTY_INFO
 220 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 221                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 222 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 223 #define QIXIS_BASE              0xffdf0000
 224 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 225 #define QIXIS_LBMAP_SWITCH              0x06
 226 #define QIXIS_LBMAP_MASK                0x0f
 227 #define QIXIS_LBMAP_SHIFT               0
 228 #define QIXIS_LBMAP_DFLTBANK            0x00
 229 #define QIXIS_LBMAP_ALTBANK             0x04
 230 #define QIXIS_RST_CTL_RESET             0x31
 231 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 232 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 233 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 234
 235 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 236 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 237                                 | CSPR_PORT_SIZE_8 \
 238                                 | CSPR_MSEL_GPCM \
 239                                 | CSPR_V)
 240 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 241 #define CONFIG_SYS_CSOR3        0x0
 242 /* QIXIS Timing parameters for IFC CS3 */
 243 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 244                                         FTIM0_GPCM_TEADC(0x0e) | \
 245                                         FTIM0_GPCM_TEAHC(0x0e))
 246 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 247                                         FTIM1_GPCM_TRAD(0x3f))
 248 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 249                                         FTIM2_GPCM_TCH(0x0) | \
 250                                         FTIM2_GPCM_TWP(0x1f))
 251 #define CONFIG_SYS_CS3_FTIM3            0x0
 252
 253 #define CONFIG_NAND_FSL_IFC
 254 #define CONFIG_SYS_NAND_BASE            0xff800000
 255 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 256
 257 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 258 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 259                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 260                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 261                                 | CSPR_V)
 262 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 263
 264 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 265                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 266                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 267                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 268                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 269                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 270                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 271
 272 #define CONFIG_SYS_NAND_ONFI_DETECTION
 273
 274 /* ONFI NAND Flash mode0 Timing Params */
 275 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 276                                         FTIM0_NAND_TWP(0x18)   | \
 277                                         FTIM0_NAND_TWCHT(0x07) | \
 278                                         FTIM0_NAND_TWH(0x0a))
 279 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 280                                         FTIM1_NAND_TWBE(0x39)  | \
 281                                         FTIM1_NAND_TRR(0x0e)   | \
 282                                         FTIM1_NAND_TRP(0x18))
 283 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 284                                         FTIM2_NAND_TREH(0x0a) | \
 285                                         FTIM2_NAND_TWHRE(0x1e))
 286 #define CONFIG_SYS_NAND_FTIM3           0x0
 287
 288 #define CONFIG_SYS_NAND_DDR_LAW         11
 289 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 290 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 291 #define CONFIG_MTD_NAND_VERIFY_WRITE
 292 #define CONFIG_CMD_NAND
 293
 294 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 295
 296 #if defined(CONFIG_NAND)
 297 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 298 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 299 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 300 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 301 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 302 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 303 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 304 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 305 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 306 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 307 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 308 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 309 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 310 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 311 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 312 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 313 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 314 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 315 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 316 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 317 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 318 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 319 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 320 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 321 #else
 322 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 323 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 324 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 325 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 326 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 327 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 328 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 329 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 330 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 331 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 332 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 333 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 334 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 335 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 336 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 337 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 338 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 339 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 340 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 341 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 342 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 343 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 344 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 345 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 346 #endif
 347
 348 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 349
 350 #if defined(CONFIG_RAMBOOT_PBL)
 351 #define CONFIG_SYS_RAMBOOT
 352 #endif
 353
 354 #define CONFIG_BOARD_EARLY_INIT_R
 355 #define CONFIG_MISC_INIT_R
 356
 357 #define CONFIG_HWCONFIG
 358
 359 /* define to use L1 as initial stack */
 360 #define CONFIG_L1_INIT_RAM
 361 #define CONFIG_SYS_INIT_RAM_LOCK
 362 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 363 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 364 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 365 /* The assembler doesn't like typecast */
 366 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 367         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 368           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 369 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 370
 371 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 372                                         GENERATED_GBL_DATA_SIZE)
 373 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 374
 375 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 376 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 377
 378 /* Serial Port - controlled on board with jumper J8
 379  * open - index 2
 380  * shorted - index 1
 381  */
 382 #define CONFIG_CONS_INDEX       1
 383 #define CONFIG_SYS_NS16550
 384 #define CONFIG_SYS_NS16550_SERIAL
 385 #define CONFIG_SYS_NS16550_REG_SIZE     1
 386 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 387
 388 #define CONFIG_SYS_BAUDRATE_TABLE       \
 389         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 390
 391 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 392 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 393 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 394 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 395 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
 396 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 397
 398 /* Use the HUSH parser */
 399 #define CONFIG_SYS_HUSH_PARSER
 400 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 401
 402 /* pass open firmware flat tree */
 403 #define CONFIG_OF_LIBFDT
 404 #define CONFIG_OF_BOARD_SETUP
 405 #define CONFIG_OF_STDOUT_VIA_ALIAS
 406
 407 /* new uImage format support */
 408 #define CONFIG_FIT
 409 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 410
 411 /* I2C */
 412 #define CONFIG_SYS_I2C
 413 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 414 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 415 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 416 #define CONFIG_SYS_FSL_I2C2_SPEED       400000  /* I2C speed in Hz */
 417 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 418 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 419 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
 420
 421 #define I2C_MUX_PCA_ADDR                0x77
 422 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 423
 424
 425 /* I2C bus multiplexer */
 426 #define I2C_MUX_CH_DEFAULT      0x8
 427
 428 /*
 429  * RTC configuration
 430  */
 431 #define RTC
 432 #define CONFIG_RTC_DS3231               1
 433 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 434
 435 /*
 436  * eSPI - Enhanced SPI
 437  */
 438 #define CONFIG_FSL_ESPI
 439 #define CONFIG_SPI_FLASH
 440 #define CONFIG_SPI_FLASH_STMICRO
 441 #define CONFIG_SPI_FLASH_SST
 442 #define CONFIG_SPI_FLASH_EON
 443 #define CONFIG_CMD_SF
 444 #define CONFIG_SF_DEFAULT_SPEED         10000000
 445 #define CONFIG_SF_DEFAULT_MODE          0
 446
 447 /*
 448  * General PCI
 449  * Memory space is mapped 1-1, but I/O space must start from 0.
 450  */
 451
 452 #ifdef CONFIG_PCI
 453 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 454 #ifdef CONFIG_PCIE1
 455 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 456 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 457 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 458 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 459 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 460 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 461 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 462 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 463 #endif
 464
 465 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 466 #ifdef CONFIG_PCIE2
 467 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 468 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 469 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 470 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 471 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 472 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 473 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 474 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 475 #endif
 476
 477 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 478 #ifdef CONFIG_PCIE3
 479 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 480 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 481 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 482 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 483 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 484 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 485 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 486 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 487 #endif
 488
 489 /* controller 4, Base address 203000 */
 490 #ifdef CONFIG_PCIE4
 491 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 492 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 493 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 494 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 495 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 496 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 497 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 498 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 499 #endif
 500
 501 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 502 #define CONFIG_E1000
 503
 504 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 505 #define CONFIG_DOS_PARTITION
 506 #endif  /* CONFIG_PCI */
 507
 508 /* SATA */
 509 #define CONFIG_FSL_SATA_V2
 510 #ifdef CONFIG_FSL_SATA_V2
 511 #define CONFIG_LIBATA
 512 #define CONFIG_FSL_SATA
 513
 514 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 515 #define CONFIG_SATA1
 516 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 517 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 518 #define CONFIG_SATA2
 519 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 520 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 521
 522 #define CONFIG_LBA48
 523 #define CONFIG_CMD_SATA
 524 #define CONFIG_DOS_PARTITION
 525 #define CONFIG_CMD_EXT2
 526 #endif
 527
 528 /*
 529 * USB
 530 */
 531 #define CONFIG_HAS_FSL_DR_USB
 532
 533 #ifdef CONFIG_HAS_FSL_DR_USB
 534 #define CONFIG_USB_EHCI
 535
 536 #ifdef CONFIG_USB_EHCI
 537 #define CONFIG_CMD_USB
 538 #define CONFIG_USB_STORAGE
 539 #define CONFIG_USB_EHCI_FSL
 540 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 541 #define CONFIG_CMD_EXT2
 542 #endif
 543 #endif
 544
 545 #define CONFIG_MMC
 546
 547 #ifdef CONFIG_MMC
 548 #define CONFIG_FSL_ESDHC
 549 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 550 #define CONFIG_CMD_MMC
 551 #define CONFIG_GENERIC_MMC
 552 #define CONFIG_CMD_EXT2
 553 #define CONFIG_CMD_FAT
 554 #define CONFIG_DOS_PARTITION
 555 #endif
 556
 557 /* Qman/Bman */
 558 #ifndef CONFIG_NOBQFMAN
 559 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 560 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 561 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 562 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 563 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 564 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 565 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 566 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 567 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 568
 569 #define CONFIG_SYS_DPAA_FMAN
 570 #define CONFIG_SYS_DPAA_PME
 571
 572 /* Default address of microcode for the Linux Fman driver */
 573 #if defined(CONFIG_SPIFLASH)
 574 /*
 575  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 576  * env, so we got 0x110000.
 577  */
 578 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 579 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 580 #elif defined(CONFIG_SDCARD)
 581 /*
 582  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 583  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 584  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 585  */
 586 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 587 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1130)
 588 #elif defined(CONFIG_NAND)
 589 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 590 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
 591 #else
 592 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 593 #define CONFIG_SYS_QE_FMAN_FW_ADDR              0xEFF40000
 594 #endif
 595 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 596 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 597 #endif /* CONFIG_NOBQFMAN */
 598
 599 #ifdef CONFIG_SYS_DPAA_FMAN
 600 #define CONFIG_FMAN_ENET
 601 #define CONFIG_PHYLIB_10G
 602 #define CONFIG_PHY_VITESSE
 603 #define CONFIG_PHY_REALTEK
 604 #define CONFIG_PHY_TERANETICS
 605 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 606 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 607 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 608 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 609 #endif
 610
 611 #ifdef CONFIG_FMAN_ENET
 612 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x10
 613 #define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR  0x11
 614 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 615
 616 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 617 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 618 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 619 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 620
 621 #define CONFIG_MII              /* MII PHY management */
 622 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 623 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 624 #endif
 625
 626 /*
 627  * Environment
 628  */
 629 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 630 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 631
 632 /*
 633  * Command line configuration.
 634  */
 635 #include <config_cmd_default.h>
 636
 637 #define CONFIG_CMD_DATE
 638 #define CONFIG_CMD_DHCP
 639 #define CONFIG_CMD_EEPROM
 640 #define CONFIG_CMD_ELF
 641 #define CONFIG_CMD_ERRATA
 642 #define CONFIG_CMD_GREPENV
 643 #define CONFIG_CMD_IRQ
 644 #define CONFIG_CMD_I2C
 645 #define CONFIG_CMD_MII
 646 #define CONFIG_CMD_PING
 647 #define CONFIG_CMD_REGINFO
 648 #define CONFIG_CMD_SETEXPR
 649
 650 #ifdef CONFIG_PCI
 651 #define CONFIG_CMD_PCI
 652 #define CONFIG_CMD_NET
 653 #endif
 654
 655 /*
 656  * Miscellaneous configurable options
 657  */
 658 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 659 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 660 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 661 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 662 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 663 #ifdef CONFIG_CMD_KGDB
 664 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 665 #else
 666 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 667 #endif
 668 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 669 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 670 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 671 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks*/
 672
 673 /*
 674  * For booting Linux, the board info and command line data
 675  * have to be in the first 64 MB of memory, since this is
 676  * the maximum mapped by the Linux kernel during initialization.
 677  */
 678 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 679 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 680
 681 #ifdef CONFIG_CMD_KGDB
 682 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 683 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 684 #endif
 685
 686 /*
 687  * Environment Configuration
 688  */
 689 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 690 #define CONFIG_BOOTFILE         "uImage"
 691 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 692
 693 /* default location for tftp and bootm */
 694 #define CONFIG_LOADADDR         1000000
 695
 696 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 697
 698 #define CONFIG_BAUDRATE 115200
 699
 700 #define __USB_PHY_TYPE  utmi
 701
 702 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 703         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 704         "bank_intlv=cs0_cs1;"                                   \
 705         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 706         "netdev=eth0\0"                                         \
 707         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 708         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 709         "tftpflash=tftpboot $loadaddr $uboot && "               \
 710         "protect off $ubootaddr +$filesize && "                 \
 711         "erase $ubootaddr +$filesize && "                       \
 712         "cp.b $loadaddr $ubootaddr $filesize && "               \
 713         "protect on $ubootaddr +$filesize && "                  \
 714         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 715         "consoledev=ttyS0\0"                                    \
 716         "ramdiskaddr=2000000\0"                                 \
 717         "ramdiskfile=t1040qds/ramdisk.uboot\0"                  \
 718         "fdtaddr=c00000\0"                                      \
 719         "fdtfile=t1040qds/t1040qds.dtb\0"                       \
 720         "bdev=sda3\0"                                           \
 721         "c=ffe\0"
 722
 723 #define CONFIG_LINUX                       \
 724         "setenv bootargs root=/dev/ram rw "            \
 725         "console=$consoledev,$baudrate $othbootargs;"  \
 726         "setenv ramdiskaddr 0x02000000;"               \
 727         "setenv fdtaddr 0x00c00000;"                   \
 728         "setenv loadaddr 0x1000000;"                   \
 729         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 730
 731 #define CONFIG_HDBOOT                                   \
 732         "setenv bootargs root=/dev/$bdev rw "           \
 733         "console=$consoledev,$baudrate $othbootargs;"   \
 734         "tftp $loadaddr $bootfile;"                     \
 735         "tftp $fdtaddr $fdtfile;"                       \
 736         "bootm $loadaddr - $fdtaddr"
 737
 738 #define CONFIG_NFSBOOTCOMMAND                   \
 739         "setenv bootargs root=/dev/nfs rw "     \
 740         "nfsroot=$serverip:$rootpath "          \
 741         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 742         "console=$consoledev,$baudrate $othbootargs;"   \
 743         "tftp $loadaddr $bootfile;"             \
 744         "tftp $fdtaddr $fdtfile;"               \
 745         "bootm $loadaddr - $fdtaddr"
 746
 747 #define CONFIG_RAMBOOTCOMMAND                           \
 748         "setenv bootargs root=/dev/ram rw "             \
 749         "console=$consoledev,$baudrate $othbootargs;"   \
 750         "tftp $ramdiskaddr $ramdiskfile;"               \
 751         "tftp $loadaddr $bootfile;"                     \
 752         "tftp $fdtaddr $fdtfile;"                       \
 753         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 754
 755 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 756
 757 #ifdef CONFIG_SECURE_BOOT
 758 #include <asm/fsl_secure_boot.h>
 759 #endif
 760
 761 #endif  /* __CONFIG_H */