include/configs/T104xRDB.h

   1 /*
   2 + * Copyright 2014 Freescale Semiconductor, Inc.
   3 + *
   4 + * SPDX-License-Identifier:     GPL-2.0+
   5 + */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * T104x RDB board configuration file
  12  */
  13 #include <asm/config_mpc85xx.h>
  14
  15 #ifdef CONFIG_RAMBOOT_PBL
  16
  17 #ifndef CONFIG_SECURE_BOOT
  18 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  19 #else
  20 #define CONFIG_SYS_FSL_PBL_PBI \
  21                 $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
  22 #endif
  23
  24 #define CONFIG_SPL_FLUSH_IMAGE
  25 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  26 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  27 #define CONFIG_SPL_PAD_TO               0x40000
  28 #define CONFIG_SPL_MAX_SIZE             0x28000
  29 #ifdef CONFIG_SPL_BUILD
  30 #define CONFIG_SPL_SKIP_RELOCATE
  31 #define CONFIG_SPL_COMMON_INIT_DDR
  32 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  33 #endif
  34 #define RESET_VECTOR_OFFSET             0x27FFC
  35 #define BOOT_PAGE_OFFSET                0x27000
  36
  37 #ifdef CONFIG_NAND
  38 #ifdef CONFIG_SECURE_BOOT
  39 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  40 /*
  41  * HDR would be appended at end of image and copied to DDR along
  42  * with U-Boot image.
  43  */
  44 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) + \
  45                                          CONFIG_U_BOOT_HDR_SIZE)
  46 #else
  47 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  48 #endif
  49 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  50 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  51 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  52 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  53 #ifdef CONFIG_TARGET_T1040RDB
  54 #define CONFIG_SYS_FSL_PBL_RCW \
  55 $(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
  56 #endif
  57 #ifdef CONFIG_TARGET_T1042RDB_PI
  58 #define CONFIG_SYS_FSL_PBL_RCW \
  59 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
  60 #endif
  61 #ifdef CONFIG_TARGET_T1042RDB
  62 #define CONFIG_SYS_FSL_PBL_RCW \
  63 $(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
  64 #endif
  65 #ifdef CONFIG_TARGET_T1040D4RDB
  66 #define CONFIG_SYS_FSL_PBL_RCW \
  67 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
  68 #endif
  69 #ifdef CONFIG_TARGET_T1042D4RDB
  70 #define CONFIG_SYS_FSL_PBL_RCW \
  71 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
  72 #endif
  73 #define CONFIG_SPL_NAND_BOOT
  74 #endif
  75
  76 #ifdef CONFIG_SPIFLASH
  77 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  78 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  79 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  80 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  81 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  82 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  83 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  84 #ifndef CONFIG_SPL_BUILD
  85 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  86 #endif
  87 #ifdef CONFIG_TARGET_T1040RDB
  88 #define CONFIG_SYS_FSL_PBL_RCW \
  89 $(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
  90 #endif
  91 #ifdef CONFIG_TARGET_T1042RDB_PI
  92 #define CONFIG_SYS_FSL_PBL_RCW \
  93 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
  94 #endif
  95 #ifdef CONFIG_TARGET_T1042RDB
  96 #define CONFIG_SYS_FSL_PBL_RCW \
  97 $(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
  98 #endif
  99 #ifdef CONFIG_TARGET_T1040D4RDB
 100 #define CONFIG_SYS_FSL_PBL_RCW \
 101 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
 102 #endif
 103 #ifdef CONFIG_TARGET_T1042D4RDB
 104 #define CONFIG_SYS_FSL_PBL_RCW \
 105 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
 106 #endif
 107 #define CONFIG_SPL_SPI_BOOT
 108 #endif
 109
 110 #ifdef CONFIG_SDCARD
 111 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 112 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 113 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 114 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 115 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 116 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 117 #ifndef CONFIG_SPL_BUILD
 118 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 119 #endif
 120 #ifdef CONFIG_TARGET_T1040RDB
 121 #define CONFIG_SYS_FSL_PBL_RCW \
 122 $(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
 123 #endif
 124 #ifdef CONFIG_TARGET_T1042RDB_PI
 125 #define CONFIG_SYS_FSL_PBL_RCW \
 126 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
 127 #endif
 128 #ifdef CONFIG_TARGET_T1042RDB
 129 #define CONFIG_SYS_FSL_PBL_RCW \
 130 $(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
 131 #endif
 132 #ifdef CONFIG_TARGET_T1040D4RDB
 133 #define CONFIG_SYS_FSL_PBL_RCW \
 134 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
 135 #endif
 136 #ifdef CONFIG_TARGET_T1042D4RDB
 137 #define CONFIG_SYS_FSL_PBL_RCW \
 138 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 139 #endif
 140 #define CONFIG_SPL_MMC_BOOT
 141 #endif
 142
 143 #endif
 144
 145 /* High Level Configuration Options */
 146 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
 147 #define CONFIG_MP                       /* support multiple processors */
 148
 149 /* support deep sleep */
 150 #define CONFIG_DEEP_SLEEP
 151
 152 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 153 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 154 #endif
 155
 156 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 157 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
 158 #define CONFIG_PCI_INDIRECT_BRIDGE
 159 #define CONFIG_PCIE1                    /* PCIE controller 1 */
 160 #define CONFIG_PCIE2                    /* PCIE controller 2 */
 161 #define CONFIG_PCIE3                    /* PCIE controller 3 */
 162 #define CONFIG_PCIE4                    /* PCIE controller 4 */
 163
 164 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 165 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 166
 167 #define CONFIG_ENV_OVERWRITE
 168
 169 #ifdef CONFIG_MTD_NOR_FLASH
 170 #define CONFIG_FLASH_CFI_DRIVER
 171 #define CONFIG_SYS_FLASH_CFI
 172 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 173 #endif
 174
 175 #if defined(CONFIG_SPIFLASH)
 176 #define CONFIG_SYS_EXTRA_ENV_RELOC
 177 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 178 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 179 #define CONFIG_ENV_SECT_SIZE            0x10000
 180 #elif defined(CONFIG_SDCARD)
 181 #define CONFIG_SYS_EXTRA_ENV_RELOC
 182 #define CONFIG_SYS_MMC_ENV_DEV          0
 183 #define CONFIG_ENV_SIZE                 0x2000
 184 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 185 #elif defined(CONFIG_NAND)
 186 #ifdef CONFIG_SECURE_BOOT
 187 #define CONFIG_RAMBOOT_NAND
 188 #define CONFIG_BOOTSCRIPT_COPY_RAM
 189 #endif
 190 #define CONFIG_SYS_EXTRA_ENV_RELOC
 191 #define CONFIG_ENV_SIZE                 0x2000
 192 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 193 #else
 194 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 195 #define CONFIG_ENV_SIZE         0x2000
 196 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 197 #endif
 198
 199 #define CONFIG_SYS_CLK_FREQ     100000000
 200 #define CONFIG_DDR_CLK_FREQ     66666666
 201
 202 /*
 203  * These can be toggled for performance analysis, otherwise use default.
 204  */
 205 #define CONFIG_SYS_CACHE_STASHING
 206 #define CONFIG_BACKSIDE_L2_CACHE
 207 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 208 #define CONFIG_BTB                      /* toggle branch predition */
 209 #define CONFIG_DDR_ECC
 210 #ifdef CONFIG_DDR_ECC
 211 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 212 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 213 #endif
 214
 215 #define CONFIG_ENABLE_36BIT_PHYS
 216
 217 #define CONFIG_ADDR_MAP
 218 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 219
 220 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 221 #define CONFIG_SYS_MEMTEST_END          0x00400000
 222
 223 /*
 224  *  Config the L3 Cache as L3 SRAM
 225  */
 226 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 227 /*
 228  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
 229  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
 230  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
 231  */
 232 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
 233 #define CONFIG_SYS_L3_SIZE              256 << 10
 234 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 235 #ifdef CONFIG_RAMBOOT_PBL
 236 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 237 #endif
 238 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 239 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 240 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 241 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 242
 243 #define CONFIG_SYS_DCSRBAR              0xf0000000
 244 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 245
 246 /*
 247  * DDR Setup
 248  */
 249 #define CONFIG_VERY_BIG_RAM
 250 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 251 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 252
 253 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 254 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 255
 256 #define CONFIG_DDR_SPD
 257
 258 #define CONFIG_SYS_SPD_BUS_NUM  0
 259 #define SPD_EEPROM_ADDRESS      0x51
 260
 261 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 262
 263 /*
 264  * IFC Definitions
 265  */
 266 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 267 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 268
 269 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 270 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 271                                 CSPR_PORT_SIZE_16 | \
 272                                 CSPR_MSEL_NOR | \
 273                                 CSPR_V)
 274 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 275
 276 /*
 277  * TDM Definition
 278  */
 279 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 280
 281 /* NOR Flash Timing Params */
 282 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 283 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 284                                 FTIM0_NOR_TEADC(0x5) | \
 285                                 FTIM0_NOR_TEAHC(0x5))
 286 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 287                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 288                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 289 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 290                                 FTIM2_NOR_TCH(0x4) | \
 291                                 FTIM2_NOR_TWPH(0x0E) | \
 292                                 FTIM2_NOR_TWP(0x1c))
 293 #define CONFIG_SYS_NOR_FTIM3    0x0
 294
 295 #define CONFIG_SYS_FLASH_QUIET_TEST
 296 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 297
 298 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 299 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 300 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 301 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 302
 303 #define CONFIG_SYS_FLASH_EMPTY_INFO
 304 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 305
 306 /* CPLD on IFC */
 307 #define CPLD_LBMAP_MASK                 0x3F
 308 #define CPLD_BANK_SEL_MASK              0x07
 309 #define CPLD_BANK_OVERRIDE              0x40
 310 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 311 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 312 #define CPLD_LBMAP_RESET                0xFF
 313 #define CPLD_LBMAP_SHIFT                0x03
 314
 315 #if defined(CONFIG_TARGET_T1042RDB_PI)
 316 #define CPLD_DIU_SEL_DFP                0x80
 317 #elif defined(CONFIG_TARGET_T1042D4RDB)
 318 #define CPLD_DIU_SEL_DFP                0xc0
 319 #endif
 320
 321 #if defined(CONFIG_TARGET_T1040D4RDB)
 322 #define CPLD_INT_MASK_ALL               0xFF
 323 #define CPLD_INT_MASK_THERM             0x80
 324 #define CPLD_INT_MASK_DVI_DFP           0x40
 325 #define CPLD_INT_MASK_QSGMII1           0x20
 326 #define CPLD_INT_MASK_QSGMII2           0x10
 327 #define CPLD_INT_MASK_SGMI1             0x08
 328 #define CPLD_INT_MASK_SGMI2             0x04
 329 #define CPLD_INT_MASK_TDMR1             0x02
 330 #define CPLD_INT_MASK_TDMR2             0x01
 331 #endif
 332
 333 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 334 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 335 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 336 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 337                                 | CSPR_PORT_SIZE_8 \
 338                                 | CSPR_MSEL_GPCM \
 339                                 | CSPR_V)
 340 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 341 #define CONFIG_SYS_CSOR2        0x0
 342 /* CPLD Timing parameters for IFC CS2 */
 343 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 344                                         FTIM0_GPCM_TEADC(0x0e) | \
 345                                         FTIM0_GPCM_TEAHC(0x0e))
 346 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 347                                         FTIM1_GPCM_TRAD(0x1f))
 348 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 349                                         FTIM2_GPCM_TCH(0x8) | \
 350                                         FTIM2_GPCM_TWP(0x1f))
 351 #define CONFIG_SYS_CS2_FTIM3            0x0
 352
 353 /* NAND Flash on IFC */
 354 #define CONFIG_NAND_FSL_IFC
 355 #define CONFIG_SYS_NAND_BASE            0xff800000
 356 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 357
 358 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 359 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 360                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 361                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 362                                 | CSPR_V)
 363 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 364
 365 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 366                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 367                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 368                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 369                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 370                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 371                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 372
 373 #define CONFIG_SYS_NAND_ONFI_DETECTION
 374
 375 /* ONFI NAND Flash mode0 Timing Params */
 376 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 377                                         FTIM0_NAND_TWP(0x18)   | \
 378                                         FTIM0_NAND_TWCHT(0x07) | \
 379                                         FTIM0_NAND_TWH(0x0a))
 380 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 381                                         FTIM1_NAND_TWBE(0x39)  | \
 382                                         FTIM1_NAND_TRR(0x0e)   | \
 383                                         FTIM1_NAND_TRP(0x18))
 384 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 385                                         FTIM2_NAND_TREH(0x0a) | \
 386                                         FTIM2_NAND_TWHRE(0x1e))
 387 #define CONFIG_SYS_NAND_FTIM3           0x0
 388
 389 #define CONFIG_SYS_NAND_DDR_LAW         11
 390 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 391 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 392
 393 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 394
 395 #if defined(CONFIG_NAND)
 396 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 397 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 398 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 399 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 400 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 401 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 402 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 403 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 404 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 405 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 406 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 407 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 408 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 409 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 410 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 411 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 412 #else
 413 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 414 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 415 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 416 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 417 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 418 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 419 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 420 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 421 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 422 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 423 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 424 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 425 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 426 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 427 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 428 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 429 #endif
 430
 431 #ifdef CONFIG_SPL_BUILD
 432 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 433 #else
 434 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 435 #endif
 436
 437 #if defined(CONFIG_RAMBOOT_PBL)
 438 #define CONFIG_SYS_RAMBOOT
 439 #endif
 440
 441 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044
 442 #if defined(CONFIG_NAND)
 443 #define CONFIG_A008044_WORKAROUND
 444 #endif
 445 #endif
 446
 447 #define CONFIG_MISC_INIT_R
 448
 449 #define CONFIG_HWCONFIG
 450
 451 /* define to use L1 as initial stack */
 452 #define CONFIG_L1_INIT_RAM
 453 #define CONFIG_SYS_INIT_RAM_LOCK
 454 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 455 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 456 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 457 /* The assembler doesn't like typecast */
 458 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 459         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 460           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 461 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 462
 463 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 464                                         GENERATED_GBL_DATA_SIZE)
 465 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 466
 467 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 468 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 469
 470 /* Serial Port - controlled on board with jumper J8
 471  * open - index 2
 472  * shorted - index 1
 473  */
 474 #define CONFIG_SYS_NS16550_SERIAL
 475 #define CONFIG_SYS_NS16550_REG_SIZE     1
 476 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 477
 478 #define CONFIG_SYS_BAUDRATE_TABLE       \
 479         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 480
 481 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 482 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 483 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 484 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 485
 486 #if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB)
 487 /* Video */
 488 #define CONFIG_FSL_DIU_FB
 489
 490 #ifdef CONFIG_FSL_DIU_FB
 491 #define CONFIG_FSL_DIU_CH7301
 492 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 493 #define CONFIG_VIDEO_LOGO
 494 #define CONFIG_VIDEO_BMP_LOGO
 495 #endif
 496 #endif
 497
 498 /* I2C */
 499 #define CONFIG_SYS_I2C
 500 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 501 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 502 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 503 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 504 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 505 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 506 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 507 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 508 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 509 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 510 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 511 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 512 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 513
 514 /* I2C bus multiplexer */
 515 #define I2C_MUX_PCA_ADDR                0x70
 516 #define I2C_MUX_CH_DEFAULT      0x8
 517
 518 #if defined(CONFIG_TARGET_T1042RDB_PI)  || \
 519         defined(CONFIG_TARGET_T1040D4RDB)       || \
 520         defined(CONFIG_TARGET_T1042D4RDB)
 521 /* LDI/DVI Encoder for display */
 522 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 523 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 524
 525 /*
 526  * RTC configuration
 527  */
 528 #define RTC
 529 #define CONFIG_RTC_DS1337               1
 530 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 531
 532 /*DVI encoder*/
 533 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 534 #endif
 535
 536 /*
 537  * eSPI - Enhanced SPI
 538  */
 539 #define CONFIG_SPI_FLASH_BAR
 540 #define CONFIG_SF_DEFAULT_SPEED         10000000
 541 #define CONFIG_SF_DEFAULT_MODE          0
 542 #define CONFIG_ENV_SPI_BUS              0
 543 #define CONFIG_ENV_SPI_CS               0
 544 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 545 #define CONFIG_ENV_SPI_MODE             0
 546
 547 /*
 548  * General PCI
 549  * Memory space is mapped 1-1, but I/O space must start from 0.
 550  */
 551
 552 #ifdef CONFIG_PCI
 553 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 554 #ifdef CONFIG_PCIE1
 555 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 556 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 557 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 558 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 559 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 560 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 561 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 562 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 563 #endif
 564
 565 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 566 #ifdef CONFIG_PCIE2
 567 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 568 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 569 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 570 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 571 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 572 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 573 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 574 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 575 #endif
 576
 577 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 578 #ifdef CONFIG_PCIE3
 579 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 580 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 581 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 582 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 583 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 584 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 585 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 586 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 587 #endif
 588
 589 /* controller 4, Base address 203000 */
 590 #ifdef CONFIG_PCIE4
 591 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 592 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 593 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 594 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 595 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 596 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 597 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 598 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 599 #endif
 600
 601 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 602 #endif  /* CONFIG_PCI */
 603
 604 /* SATA */
 605 #define CONFIG_FSL_SATA_V2
 606 #ifdef CONFIG_FSL_SATA_V2
 607 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 608 #define CONFIG_SATA1
 609 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 610 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 611
 612 #define CONFIG_LBA48
 613 #endif
 614
 615 /*
 616 * USB
 617 */
 618 #define CONFIG_HAS_FSL_DR_USB
 619
 620 #ifdef CONFIG_HAS_FSL_DR_USB
 621 #ifdef CONFIG_USB_EHCI_HCD
 622 #define CONFIG_USB_EHCI_FSL
 623 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 624 #define CONFIG_EHCI_DESC_BIG_ENDIAN
 625 #endif
 626 #endif
 627
 628 #ifdef CONFIG_MMC
 629 #define CONFIG_FSL_ESDHC
 630 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 631 #endif
 632
 633 /* Qman/Bman */
 634 #ifndef CONFIG_NOBQFMAN
 635 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 636 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 637 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 638 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 639 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 640 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 641 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 642 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 643 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 644                                         CONFIG_SYS_BMAN_CENA_SIZE)
 645 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 646 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 647 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 648 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 649 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 650 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 651 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 652 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 653 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 654 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 655 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 656                                         CONFIG_SYS_QMAN_CENA_SIZE)
 657 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 658 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 659
 660 #define CONFIG_SYS_DPAA_FMAN
 661 #define CONFIG_SYS_DPAA_PME
 662
 663 #define CONFIG_QE
 664 #define CONFIG_U_QE
 665
 666 /* Default address of microcode for the Linux Fman driver */
 667 #if defined(CONFIG_SPIFLASH)
 668 /*
 669  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 670  * env, so we got 0x110000.
 671  */
 672 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 673 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 674 #elif defined(CONFIG_SDCARD)
 675 /*
 676  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 677  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 678  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 679  */
 680 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 681 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 682 #elif defined(CONFIG_NAND)
 683 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 684 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 685 #else
 686 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 687 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 688 #endif
 689
 690 #if defined(CONFIG_SPIFLASH)
 691 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 692 #elif defined(CONFIG_SDCARD)
 693 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 694 #elif defined(CONFIG_NAND)
 695 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 696 #else
 697 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 698 #endif
 699
 700 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 701 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 702 #endif /* CONFIG_NOBQFMAN */
 703
 704 #ifdef CONFIG_SYS_DPAA_FMAN
 705 #define CONFIG_FMAN_ENET
 706 #define CONFIG_PHY_VITESSE
 707 #define CONFIG_PHY_REALTEK
 708 #endif
 709
 710 #ifdef CONFIG_FMAN_ENET
 711 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB)
 712 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 713 #elif defined(CONFIG_TARGET_T1040D4RDB)
 714 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 715 #elif defined(CONFIG_TARGET_T1042D4RDB)
 716 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 717 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 718 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 719 #endif
 720
 721 #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
 722 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 723 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 724 #else
 725 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 726 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 727 #endif
 728
 729 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 730 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 731 #define CONFIG_VSC9953
 732 #ifdef CONFIG_TARGET_T1040RDB
 733 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 734 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 735 #else
 736 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 737 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 738 #endif
 739 #endif
 740
 741 #define CONFIG_MII              /* MII PHY management */
 742 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 743 #endif
 744
 745 /*
 746  * Environment
 747  */
 748 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 749 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 750
 751 /*
 752  * Miscellaneous configurable options
 753  */
 754 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 755
 756 /*
 757  * For booting Linux, the board info and command line data
 758  * have to be in the first 64 MB of memory, since this is
 759  * the maximum mapped by the Linux kernel during initialization.
 760  */
 761 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 762 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 763
 764 #ifdef CONFIG_CMD_KGDB
 765 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 766 #endif
 767
 768 /*
 769  * Dynamic MTD Partition support with mtdparts
 770  */
 771 #ifdef CONFIG_MTD_NOR_FLASH
 772 #define CONFIG_MTD_DEVICE
 773 #define CONFIG_MTD_PARTITIONS
 774 #define CONFIG_FLASH_CFI_MTD
 775 #endif
 776
 777 /*
 778  * Environment Configuration
 779  */
 780 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 781 #define CONFIG_BOOTFILE         "uImage"
 782 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 783
 784 /* default location for tftp and bootm */
 785 #define CONFIG_LOADADDR         1000000
 786
 787 #define __USB_PHY_TYPE  utmi
 788 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 789
 790 #ifdef CONFIG_TARGET_T1040RDB
 791 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 792 #elif defined(CONFIG_TARGET_T1042RDB_PI)
 793 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 794 #elif defined(CONFIG_TARGET_T1042RDB)
 795 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 796 #elif defined(CONFIG_TARGET_T1040D4RDB)
 797 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 798 #elif defined(CONFIG_TARGET_T1042D4RDB)
 799 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 800 #endif
 801
 802 #ifdef CONFIG_FSL_DIU_FB
 803 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 804 #else
 805 #define DIU_ENVIRONMENT
 806 #endif
 807
 808 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 809         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 810         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 811         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 812         "netdev=eth0\0"                                         \
 813         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 814         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 815         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 816         "tftpflash=tftpboot $loadaddr $uboot && "               \
 817         "protect off $ubootaddr +$filesize && "                 \
 818         "erase $ubootaddr +$filesize && "                       \
 819         "cp.b $loadaddr $ubootaddr $filesize && "               \
 820         "protect on $ubootaddr +$filesize && "                  \
 821         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 822         "consoledev=ttyS0\0"                                    \
 823         "ramdiskaddr=2000000\0"                                 \
 824         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 825         "fdtaddr=1e00000\0"                                     \
 826         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 827         "bdev=sda3\0"
 828
 829 #define CONFIG_LINUX                       \
 830         "setenv bootargs root=/dev/ram rw "            \
 831         "console=$consoledev,$baudrate $othbootargs;"  \
 832         "setenv ramdiskaddr 0x02000000;"               \
 833         "setenv fdtaddr 0x00c00000;"                   \
 834         "setenv loadaddr 0x1000000;"                   \
 835         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 836
 837 #define CONFIG_HDBOOT                                   \
 838         "setenv bootargs root=/dev/$bdev rw "           \
 839         "console=$consoledev,$baudrate $othbootargs;"   \
 840         "tftp $loadaddr $bootfile;"                     \
 841         "tftp $fdtaddr $fdtfile;"                       \
 842         "bootm $loadaddr - $fdtaddr"
 843
 844 #define CONFIG_NFSBOOTCOMMAND                   \
 845         "setenv bootargs root=/dev/nfs rw "     \
 846         "nfsroot=$serverip:$rootpath "          \
 847         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 848         "console=$consoledev,$baudrate $othbootargs;"   \
 849         "tftp $loadaddr $bootfile;"             \
 850         "tftp $fdtaddr $fdtfile;"               \
 851         "bootm $loadaddr - $fdtaddr"
 852
 853 #define CONFIG_RAMBOOTCOMMAND                           \
 854         "setenv bootargs root=/dev/ram rw "             \
 855         "console=$consoledev,$baudrate $othbootargs;"   \
 856         "tftp $ramdiskaddr $ramdiskfile;"               \
 857         "tftp $loadaddr $bootfile;"                     \
 858         "tftp $fdtaddr $fdtfile;"                       \
 859         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 860
 861 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 862
 863 #include <asm/fsl_secure_boot.h>
 864
 865 #endif  /* __CONFIG_H */