include/configs/T104xRDB.h

   1 /*
   2 + * Copyright 2014 Freescale Semiconductor, Inc.
   3 + *
   4 + * SPDX-License-Identifier:     GPL-2.0+
   5 + */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * T104x RDB board configuration file
  12  */
  13 #define CONFIG_T104xRDB
  14 #define CONFIG_PHYS_64BIT
  15
  16 #ifdef CONFIG_RAMBOOT_PBL
  17 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  18 #ifdef CONFIG_T1040RDB
  19 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg
  20 #endif
  21 #ifdef CONFIG_T1042RDB_PI
  22 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg
  23 #endif
  24
  25 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  26 #define CONFIG_SPL_ENV_SUPPORT
  27 #define CONFIG_SPL_SERIAL_SUPPORT
  28 #define CONFIG_SPL_FLUSH_IMAGE
  29 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  30 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  31 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  32 #define CONFIG_SPL_I2C_SUPPORT
  33 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  34 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  35 #define CONFIG_SYS_TEXT_BASE            0x30001000
  36 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  37 #define CONFIG_SPL_PAD_TO               0x40000
  38 #define CONFIG_SPL_MAX_SIZE             0x28000
  39 #ifdef CONFIG_SPL_BUILD
  40 #define CONFIG_SPL_SKIP_RELOCATE
  41 #define CONFIG_SPL_COMMON_INIT_DDR
  42 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  43 #define CONFIG_SYS_NO_FLASH
  44 #endif
  45 #define RESET_VECTOR_OFFSET             0x27FFC
  46 #define BOOT_PAGE_OFFSET                0x27000
  47
  48 #ifdef CONFIG_NAND
  49 #define CONFIG_SPL_NAND_SUPPORT
  50 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  51 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  52 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  53 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  54 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  55 #define CONFIG_SPL_NAND_BOOT
  56 #endif
  57
  58 #ifdef CONFIG_SPIFLASH
  59 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  60 #define CONFIG_SPL_SPI_SUPPORT
  61 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  62 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  63 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  64 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  65 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  66 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  67 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  68 #ifndef CONFIG_SPL_BUILD
  69 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  70 #endif
  71 #define CONFIG_SPL_SPI_BOOT
  72 #endif
  73
  74 #ifdef CONFIG_SDCARD
  75 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  76 #define CONFIG_SPL_MMC_SUPPORT
  77 #define CONFIG_SPL_MMC_MINIMAL
  78 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  79 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
  80 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
  81 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  82 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  83 #ifndef CONFIG_SPL_BUILD
  84 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  85 #endif
  86 #define CONFIG_SPL_MMC_BOOT
  87 #endif
  88
  89 #endif
  90
  91 /* High Level Configuration Options */
  92 #define CONFIG_BOOKE
  93 #define CONFIG_E500                     /* BOOKE e500 family */
  94 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  95 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  96 #define CONFIG_MP                       /* support multiple processors */
  97
  98 /* support deep sleep */
  99 #define CONFIG_DEEP_SLEEP
 100 #define CONFIG_SILENT_CONSOLE
 101
 102 #ifndef CONFIG_SYS_TEXT_BASE
 103 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 104 #endif
 105
 106 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 107 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 108 #endif
 109
 110 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 111 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
 112 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
 113 #define CONFIG_PCI                      /* Enable PCI/PCIE */
 114 #define CONFIG_PCI_INDIRECT_BRIDGE
 115 #define CONFIG_PCIE1                    /* PCIE controler 1 */
 116 #define CONFIG_PCIE2                    /* PCIE controler 2 */
 117 #define CONFIG_PCIE3                    /* PCIE controler 3 */
 118 #define CONFIG_PCIE4                    /* PCIE controler 4 */
 119
 120 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 121 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 122
 123 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 124
 125 #define CONFIG_ENV_OVERWRITE
 126
 127 #ifndef CONFIG_SYS_NO_FLASH
 128 #define CONFIG_FLASH_CFI_DRIVER
 129 #define CONFIG_SYS_FLASH_CFI
 130 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 131 #endif
 132
 133 #if defined(CONFIG_SPIFLASH)
 134 #define CONFIG_SYS_EXTRA_ENV_RELOC
 135 #define CONFIG_ENV_IS_IN_SPI_FLASH
 136 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 137 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 138 #define CONFIG_ENV_SECT_SIZE            0x10000
 139 #elif defined(CONFIG_SDCARD)
 140 #define CONFIG_SYS_EXTRA_ENV_RELOC
 141 #define CONFIG_ENV_IS_IN_MMC
 142 #define CONFIG_SYS_MMC_ENV_DEV          0
 143 #define CONFIG_ENV_SIZE                 0x2000
 144 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 145 #elif defined(CONFIG_NAND)
 146 #define CONFIG_SYS_EXTRA_ENV_RELOC
 147 #define CONFIG_ENV_IS_IN_NAND
 148 #define CONFIG_ENV_SIZE                 0x2000
 149 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 150 #else
 151 #define CONFIG_ENV_IS_IN_FLASH
 152 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 153 #define CONFIG_ENV_SIZE         0x2000
 154 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 155 #endif
 156
 157 #define CONFIG_SYS_CLK_FREQ     100000000
 158 #define CONFIG_DDR_CLK_FREQ     66666666
 159
 160 /*
 161  * These can be toggled for performance analysis, otherwise use default.
 162  */
 163 #define CONFIG_SYS_CACHE_STASHING
 164 #define CONFIG_BACKSIDE_L2_CACHE
 165 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 166 #define CONFIG_BTB                      /* toggle branch predition */
 167 #define CONFIG_DDR_ECC
 168 #ifdef CONFIG_DDR_ECC
 169 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 170 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 171 #endif
 172
 173 #define CONFIG_ENABLE_36BIT_PHYS
 174
 175 #define CONFIG_ADDR_MAP
 176 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 177
 178 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 179 #define CONFIG_SYS_MEMTEST_END          0x00400000
 180 #define CONFIG_SYS_ALT_MEMTEST
 181 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 182
 183 /*
 184  *  Config the L3 Cache as L3 SRAM
 185  */
 186 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 187 #define CONFIG_SYS_L3_SIZE              256 << 10
 188 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 189 #ifdef CONFIG_RAMBOOT_PBL
 190 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 191 #endif
 192 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 193 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 194 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 195 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 196
 197 #define CONFIG_SYS_DCSRBAR              0xf0000000
 198 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 199
 200 /*
 201  * DDR Setup
 202  */
 203 #define CONFIG_VERY_BIG_RAM
 204 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 205 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 206
 207 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 208 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 209 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 210
 211 #define CONFIG_DDR_SPD
 212 #define CONFIG_SYS_DDR_RAW_TIMING
 213 #define CONFIG_SYS_FSL_DDR3
 214
 215 #define CONFIG_SYS_SPD_BUS_NUM  0
 216 #define SPD_EEPROM_ADDRESS      0x51
 217
 218 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 219
 220 /*
 221  * IFC Definitions
 222  */
 223 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 224 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 225
 226 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 227 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 228                                 CSPR_PORT_SIZE_16 | \
 229                                 CSPR_MSEL_NOR | \
 230                                 CSPR_V)
 231 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 232
 233 /*
 234  * TDM Definition
 235  */
 236 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 237
 238 /* NOR Flash Timing Params */
 239 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 240 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 241                                 FTIM0_NOR_TEADC(0x5) | \
 242                                 FTIM0_NOR_TEAHC(0x5))
 243 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 244                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 245                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 246 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 247                                 FTIM2_NOR_TCH(0x4) | \
 248                                 FTIM2_NOR_TWPH(0x0E) | \
 249                                 FTIM2_NOR_TWP(0x1c))
 250 #define CONFIG_SYS_NOR_FTIM3    0x0
 251
 252 #define CONFIG_SYS_FLASH_QUIET_TEST
 253 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 254
 255 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 256 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 257 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 258 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 259
 260 #define CONFIG_SYS_FLASH_EMPTY_INFO
 261 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 262
 263 /* CPLD on IFC */
 264 #define CPLD_LBMAP_MASK                 0x3F
 265 #define CPLD_BANK_SEL_MASK              0x07
 266 #define CPLD_BANK_OVERRIDE              0x40
 267 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 268 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 269 #define CPLD_LBMAP_RESET                0xFF
 270 #define CPLD_LBMAP_SHIFT                0x03
 271 #ifdef CONFIG_T1042RDB_PI
 272 #define CPLD_DIU_SEL_DFP                0x80
 273 #endif
 274
 275 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 276 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 277 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 278 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 279                                 | CSPR_PORT_SIZE_8 \
 280                                 | CSPR_MSEL_GPCM \
 281                                 | CSPR_V)
 282 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 283 #define CONFIG_SYS_CSOR2        0x0
 284 /* CPLD Timing parameters for IFC CS2 */
 285 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 286                                         FTIM0_GPCM_TEADC(0x0e) | \
 287                                         FTIM0_GPCM_TEAHC(0x0e))
 288 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 289                                         FTIM1_GPCM_TRAD(0x1f))
 290 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 291                                         FTIM2_GPCM_TCH(0x8) | \
 292                                         FTIM2_GPCM_TWP(0x1f))
 293 #define CONFIG_SYS_CS2_FTIM3            0x0
 294
 295 /* NAND Flash on IFC */
 296 #define CONFIG_NAND_FSL_IFC
 297 #define CONFIG_SYS_NAND_BASE            0xff800000
 298 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 299
 300 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 301 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 302                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 303                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 304                                 | CSPR_V)
 305 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 306
 307 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 308                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 309                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 310                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 311                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 312                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 313                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 314
 315 #define CONFIG_SYS_NAND_ONFI_DETECTION
 316
 317 /* ONFI NAND Flash mode0 Timing Params */
 318 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 319                                         FTIM0_NAND_TWP(0x18)   | \
 320                                         FTIM0_NAND_TWCHT(0x07) | \
 321                                         FTIM0_NAND_TWH(0x0a))
 322 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 323                                         FTIM1_NAND_TWBE(0x39)  | \
 324                                         FTIM1_NAND_TRR(0x0e)   | \
 325                                         FTIM1_NAND_TRP(0x18))
 326 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 327                                         FTIM2_NAND_TREH(0x0a) | \
 328                                         FTIM2_NAND_TWHRE(0x1e))
 329 #define CONFIG_SYS_NAND_FTIM3           0x0
 330
 331 #define CONFIG_SYS_NAND_DDR_LAW         11
 332 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 333 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 334 #define CONFIG_MTD_NAND_VERIFY_WRITE
 335 #define CONFIG_CMD_NAND
 336
 337 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 338
 339 #if defined(CONFIG_NAND)
 340 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 341 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 342 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 343 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 344 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 345 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 346 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 347 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 348 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 349 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 350 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 351 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 352 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 353 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 354 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 355 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 356 #else
 357 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 358 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 359 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 360 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 361 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 362 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 363 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 364 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 365 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 366 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 367 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 368 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 369 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 370 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 371 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 372 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 373 #endif
 374
 375 #ifdef CONFIG_SPL_BUILD
 376 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 377 #else
 378 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 379 #endif
 380
 381 #if defined(CONFIG_RAMBOOT_PBL)
 382 #define CONFIG_SYS_RAMBOOT
 383 #endif
 384
 385 #define CONFIG_BOARD_EARLY_INIT_R
 386 #define CONFIG_MISC_INIT_R
 387
 388 #define CONFIG_HWCONFIG
 389
 390 /* define to use L1 as initial stack */
 391 #define CONFIG_L1_INIT_RAM
 392 #define CONFIG_SYS_INIT_RAM_LOCK
 393 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 394 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 395 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 396 /* The assembler doesn't like typecast */
 397 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 398         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 399           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 400 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 401
 402 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 403                                         GENERATED_GBL_DATA_SIZE)
 404 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 405
 406 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 407 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 408
 409 /* Serial Port - controlled on board with jumper J8
 410  * open - index 2
 411  * shorted - index 1
 412  */
 413 #define CONFIG_CONS_INDEX       1
 414 #define CONFIG_SYS_NS16550
 415 #define CONFIG_SYS_NS16550_SERIAL
 416 #define CONFIG_SYS_NS16550_REG_SIZE     1
 417 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 418
 419 #define CONFIG_SYS_BAUDRATE_TABLE       \
 420         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 421
 422 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 423 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 424 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 425 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 426 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
 427 #ifndef CONFIG_SPL_BUILD
 428 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 429 #endif
 430
 431 /* Use the HUSH parser */
 432 #define CONFIG_SYS_HUSH_PARSER
 433 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 434
 435 #ifdef CONFIG_T1042RDB_PI
 436 /* Video */
 437 #define CONFIG_FSL_DIU_FB
 438
 439 #ifdef CONFIG_FSL_DIU_FB
 440 #define CONFIG_FSL_DIU_CH7301
 441 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 442 #define CONFIG_VIDEO
 443 #define CONFIG_CMD_BMP
 444 #define CONFIG_CFB_CONSOLE
 445 #define CONFIG_CFB_CONSOLE_ANSI
 446 #define CONFIG_VIDEO_SW_CURSOR
 447 #define CONFIG_VGA_AS_SINGLE_DEVICE
 448 #define CONFIG_VIDEO_LOGO
 449 #define CONFIG_VIDEO_BMP_LOGO
 450 #endif
 451 #endif
 452
 453 /* pass open firmware flat tree */
 454 #define CONFIG_OF_LIBFDT
 455 #define CONFIG_OF_BOARD_SETUP
 456 #define CONFIG_OF_STDOUT_VIA_ALIAS
 457
 458 /* new uImage format support */
 459 #define CONFIG_FIT
 460 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 461
 462 /* I2C */
 463 #define CONFIG_SYS_I2C
 464 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 465 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 466 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 467 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 468 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 469 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 470 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 471 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 472 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 473 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 474 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 475 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 476 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 477
 478 /* I2C bus multiplexer */
 479 #define I2C_MUX_PCA_ADDR                0x70
 480 #ifdef CONFIG_T1040RDB
 481 #define I2C_MUX_CH_DEFAULT      0x8
 482 #endif
 483
 484 #ifdef CONFIG_T1042RDB_PI
 485 /* LDI/DVI Encoder for display */
 486 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 487 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 488
 489 /*
 490  * RTC configuration
 491  */
 492 #define RTC
 493 #define CONFIG_RTC_DS1337               1
 494 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 495
 496 /*DVI encoder*/
 497 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 498 #endif
 499
 500 /*
 501  * eSPI - Enhanced SPI
 502  */
 503 #define CONFIG_FSL_ESPI
 504 #define CONFIG_SPI_FLASH
 505 #define CONFIG_SPI_FLASH_STMICRO
 506 #define CONFIG_CMD_SF
 507 #define CONFIG_SF_DEFAULT_SPEED         10000000
 508 #define CONFIG_SF_DEFAULT_MODE          0
 509 #define CONFIG_ENV_SPI_BUS              0
 510 #define CONFIG_ENV_SPI_CS               0
 511 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 512 #define CONFIG_ENV_SPI_MODE             0
 513
 514 /*
 515  * General PCI
 516  * Memory space is mapped 1-1, but I/O space must start from 0.
 517  */
 518
 519 #ifdef CONFIG_PCI
 520 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 521 #ifdef CONFIG_PCIE1
 522 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 523 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 524 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 525 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 526 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 527 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 528 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 529 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 530 #endif
 531
 532 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 533 #ifdef CONFIG_PCIE2
 534 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 535 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 536 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 537 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 538 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 539 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 540 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 541 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 542 #endif
 543
 544 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 545 #ifdef CONFIG_PCIE3
 546 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 547 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 548 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 549 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 550 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 551 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 552 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 553 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 554 #endif
 555
 556 /* controller 4, Base address 203000 */
 557 #ifdef CONFIG_PCIE4
 558 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 559 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 560 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 561 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 562 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 563 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 564 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 565 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 566 #endif
 567
 568 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 569 #define CONFIG_E1000
 570
 571 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 572 #define CONFIG_DOS_PARTITION
 573 #endif  /* CONFIG_PCI */
 574
 575 /* SATA */
 576 #define CONFIG_FSL_SATA_V2
 577 #ifdef CONFIG_FSL_SATA_V2
 578 #define CONFIG_LIBATA
 579 #define CONFIG_FSL_SATA
 580
 581 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 582 #define CONFIG_SATA1
 583 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 584 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 585
 586 #define CONFIG_LBA48
 587 #define CONFIG_CMD_SATA
 588 #define CONFIG_DOS_PARTITION
 589 #define CONFIG_CMD_EXT2
 590 #endif
 591
 592 /*
 593 * USB
 594 */
 595 #define CONFIG_HAS_FSL_DR_USB
 596
 597 #ifdef CONFIG_HAS_FSL_DR_USB
 598 #define CONFIG_USB_EHCI
 599
 600 #ifdef CONFIG_USB_EHCI
 601 #define CONFIG_CMD_USB
 602 #define CONFIG_USB_STORAGE
 603 #define CONFIG_USB_EHCI_FSL
 604 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 605 #define CONFIG_CMD_EXT2
 606 #endif
 607 #endif
 608
 609 #define CONFIG_MMC
 610
 611 #ifdef CONFIG_MMC
 612 #define CONFIG_FSL_ESDHC
 613 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 614 #define CONFIG_CMD_MMC
 615 #define CONFIG_GENERIC_MMC
 616 #define CONFIG_CMD_EXT2
 617 #define CONFIG_CMD_FAT
 618 #define CONFIG_DOS_PARTITION
 619 #endif
 620
 621 /* Qman/Bman */
 622 #ifndef CONFIG_NOBQFMAN
 623 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 624 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 625 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 626 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 627 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 628 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 629 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 630 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 631 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 632
 633 #define CONFIG_SYS_DPAA_FMAN
 634 #define CONFIG_SYS_DPAA_PME
 635
 636 #ifdef CONFIG_T1040RDB
 637 #define CONFIG_QE
 638 #define CONFIG_U_QE
 639 #endif
 640
 641 /* Default address of microcode for the Linux Fman driver */
 642 #if defined(CONFIG_SPIFLASH)
 643 /*
 644  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 645  * env, so we got 0x110000.
 646  */
 647 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 648 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 649 #elif defined(CONFIG_SDCARD)
 650 /*
 651  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 652  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 653  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 654  */
 655 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 656 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 657 #elif defined(CONFIG_NAND)
 658 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 659 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 660 #else
 661 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 662 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 663 #endif
 664
 665 #ifdef CONFIG_T1040RDB
 666 #if defined(CONFIG_SPIFLASH)
 667 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 668 #elif defined(CONFIG_SDCARD)
 669 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 670 #elif defined(CONFIG_NAND)
 671 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 672 #else
 673 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 674 #endif
 675 #endif
 676
 677
 678 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 679 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 680 #endif /* CONFIG_NOBQFMAN */
 681
 682 #ifdef CONFIG_SYS_DPAA_FMAN
 683 #define CONFIG_FMAN_ENET
 684 #define CONFIG_PHY_VITESSE
 685 #define CONFIG_PHY_REALTEK
 686 #endif
 687
 688 #ifdef CONFIG_FMAN_ENET
 689 #ifdef CONFIG_T1040RDB
 690 #define CONFIG_SYS_SGMII1_PHY_ADDR              0x03
 691 #endif
 692 #define CONFIG_SYS_RGMII1_PHY_ADDR              0x01
 693 #define CONFIG_SYS_RGMII2_PHY_ADDR              0x02
 694
 695 #define CONFIG_MII              /* MII PHY management */
 696 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 697 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 698 #endif
 699
 700 /*
 701  * Environment
 702  */
 703 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 704 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 705
 706 /*
 707  * Command line configuration.
 708  */
 709 #include <config_cmd_default.h>
 710
 711 #ifdef CONFIG_T1042RDB_PI
 712 #define CONFIG_CMD_DATE
 713 #endif
 714 #define CONFIG_CMD_DHCP
 715 #define CONFIG_CMD_ELF
 716 #define CONFIG_CMD_ERRATA
 717 #define CONFIG_CMD_GREPENV
 718 #define CONFIG_CMD_IRQ
 719 #define CONFIG_CMD_I2C
 720 #define CONFIG_CMD_MII
 721 #define CONFIG_CMD_PING
 722 #define CONFIG_CMD_REGINFO
 723 #define CONFIG_CMD_SETEXPR
 724
 725 #ifdef CONFIG_PCI
 726 #define CONFIG_CMD_PCI
 727 #define CONFIG_CMD_NET
 728 #endif
 729
 730 /*
 731  * Miscellaneous configurable options
 732  */
 733 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 734 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 735 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 736 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 737 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 738 #ifdef CONFIG_CMD_KGDB
 739 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 740 #else
 741 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 742 #endif
 743 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 744 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 745 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 746
 747 /*
 748  * For booting Linux, the board info and command line data
 749  * have to be in the first 64 MB of memory, since this is
 750  * the maximum mapped by the Linux kernel during initialization.
 751  */
 752 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 753 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 754
 755 #ifdef CONFIG_CMD_KGDB
 756 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 757 #endif
 758
 759 /*
 760  * Dynamic MTD Partition support with mtdparts
 761  */
 762 #ifndef CONFIG_SYS_NO_FLASH
 763 #define CONFIG_MTD_DEVICE
 764 #define CONFIG_MTD_PARTITIONS
 765 #define CONFIG_CMD_MTDPARTS
 766 #define CONFIG_FLASH_CFI_MTD
 767 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 768                         "spi0=spife110000.0"
 769 #define MTDPARTS_DEFAULT        "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 770                                 "128k(dtb),96m(fs),-(user);"\
 771                                 "fff800000.flash:2m(uboot),9m(kernel),"\
 772                                 "128k(dtb),96m(fs),-(user);spife110000.0:" \
 773                                 "2m(uboot),9m(kernel),128k(dtb),-(user)"
 774 #endif
 775
 776 /*
 777  * Environment Configuration
 778  */
 779 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 780 #define CONFIG_BOOTFILE         "uImage"
 781 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 782
 783 /* default location for tftp and bootm */
 784 #define CONFIG_LOADADDR         1000000
 785
 786 #define CONFIG_BOOTDELAY        10      /*-1 disables auto-boot*/
 787
 788 #define CONFIG_BAUDRATE 115200
 789
 790 #define __USB_PHY_TYPE  utmi
 791
 792 #ifdef CONFIG_T1040RDB
 793 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 794 #define RAMDISKFILE     "t1040rdb/ramdisk.uboot"
 795 #elif CONFIG_T1042RDB_PI
 796 #define FDTFILE         "t1040rdb_pi/t1040rdb_pi.dtb"
 797 #define RAMDISKFILE     "t1040rdb_pi/ramdisk.uboot"
 798 #endif
 799
 800 #ifdef CONFIG_FSL_DIU_FB
 801 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 802 #else
 803 #define DIU_ENVIRONMENT
 804 #endif
 805
 806 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 807         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 808         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 809         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 810         "netdev=eth0\0"                                         \
 811         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 812         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 813         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 814         "tftpflash=tftpboot $loadaddr $uboot && "               \
 815         "protect off $ubootaddr +$filesize && "                 \
 816         "erase $ubootaddr +$filesize && "                       \
 817         "cp.b $loadaddr $ubootaddr $filesize && "               \
 818         "protect on $ubootaddr +$filesize && "                  \
 819         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 820         "consoledev=ttyS0\0"                                    \
 821         "ramdiskaddr=2000000\0"                                 \
 822         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 823         "fdtaddr=c00000\0"                                      \
 824         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 825         "bdev=sda3\0"
 826
 827 #define CONFIG_LINUX                       \
 828         "setenv bootargs root=/dev/ram rw "            \
 829         "console=$consoledev,$baudrate $othbootargs;"  \
 830         "setenv ramdiskaddr 0x02000000;"               \
 831         "setenv fdtaddr 0x00c00000;"                   \
 832         "setenv loadaddr 0x1000000;"                   \
 833         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 834
 835 #define CONFIG_HDBOOT                                   \
 836         "setenv bootargs root=/dev/$bdev rw "           \
 837         "console=$consoledev,$baudrate $othbootargs;"   \
 838         "tftp $loadaddr $bootfile;"                     \
 839         "tftp $fdtaddr $fdtfile;"                       \
 840         "bootm $loadaddr - $fdtaddr"
 841
 842 #define CONFIG_NFSBOOTCOMMAND                   \
 843         "setenv bootargs root=/dev/nfs rw "     \
 844         "nfsroot=$serverip:$rootpath "          \
 845         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 846         "console=$consoledev,$baudrate $othbootargs;"   \
 847         "tftp $loadaddr $bootfile;"             \
 848         "tftp $fdtaddr $fdtfile;"               \
 849         "bootm $loadaddr - $fdtaddr"
 850
 851 #define CONFIG_RAMBOOTCOMMAND                           \
 852         "setenv bootargs root=/dev/ram rw "             \
 853         "console=$consoledev,$baudrate $othbootargs;"   \
 854         "tftp $ramdiskaddr $ramdiskfile;"               \
 855         "tftp $loadaddr $bootfile;"                     \
 856         "tftp $fdtaddr $fdtfile;"                       \
 857         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 858
 859 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 860
 861 #ifdef CONFIG_SECURE_BOOT
 862 #include <asm/fsl_secure_boot.h>
 863 #endif
 864
 865 #endif  /* __CONFIG_H */