include/configs/T4240QDS.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T4240 QDS board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_FSL_SATA_V2
  14 #define CONFIG_PCIE4
  15
  16 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  17
  18 #ifdef CONFIG_RAMBOOT_PBL
  19 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t4qds/t4_pbi.cfg
  20 #if !defined(CONFIG_NAND) && !defined(CONFIG_SDCARD)
  21 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  22 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  23 #else
  24 #define CONFIG_SPL_FLUSH_IMAGE
  25 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  26 #define CONFIG_SYS_TEXT_BASE            0x00201000
  27 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  28 #define CONFIG_SPL_PAD_TO               0x40000
  29 #define CONFIG_SPL_MAX_SIZE             0x28000
  30 #define RESET_VECTOR_OFFSET             0x27FFC
  31 #define BOOT_PAGE_OFFSET                0x27000
  32
  33 #ifdef  CONFIG_NAND
  34 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  35 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  36 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  37 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  38 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  39 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_nand_rcw.cfg
  40 #define CONFIG_SPL_NAND_BOOT
  41 #endif
  42
  43 #ifdef  CONFIG_SDCARD
  44 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  45 #define CONFIG_SPL_MMC_MINIMAL
  46 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  47 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  48 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  49 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  50 #ifndef CONFIG_SPL_BUILD
  51 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  52 #endif
  53 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  54 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_sd_rcw.cfg
  55 #define CONFIG_SPL_MMC_BOOT
  56 #endif
  57
  58 #ifdef CONFIG_SPL_BUILD
  59 #define CONFIG_SPL_SKIP_RELOCATE
  60 #define CONFIG_SPL_COMMON_INIT_DDR
  61 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  62 #endif
  63
  64 #endif
  65 #endif /* CONFIG_RAMBOOT_PBL */
  66
  67 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  68 /* Set 1M boot space */
  69 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  70 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  71                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  72 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  73 #endif
  74
  75 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  76 #define CONFIG_DDR_ECC
  77
  78 #include "t4qds.h"
  79
  80 #ifndef CONFIG_MTD_NOR_FLASH
  81 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
  82 #define CONFIG_ENV_IS_NOWHERE
  83 #endif
  84 #else
  85 #define CONFIG_FLASH_CFI_DRIVER
  86 #define CONFIG_SYS_FLASH_CFI
  87 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  88 #endif
  89
  90 #if defined(CONFIG_SPIFLASH)
  91 #define CONFIG_SYS_EXTRA_ENV_RELOC
  92 #define CONFIG_ENV_IS_IN_SPI_FLASH
  93 #define CONFIG_ENV_SPI_BUS              0
  94 #define CONFIG_ENV_SPI_CS               0
  95 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  96 #define CONFIG_ENV_SPI_MODE             0
  97 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  98 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  99 #define CONFIG_ENV_SECT_SIZE            0x10000
 100 #elif defined(CONFIG_SDCARD)
 101 #define CONFIG_SYS_EXTRA_ENV_RELOC
 102 #define CONFIG_ENV_IS_IN_MMC
 103 #define CONFIG_SYS_MMC_ENV_DEV          0
 104 #define CONFIG_ENV_SIZE                 0x2000
 105 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 106 #elif defined(CONFIG_NAND)
 107 #define CONFIG_SYS_EXTRA_ENV_RELOC
 108 #define CONFIG_ENV_IS_IN_NAND
 109 #define CONFIG_ENV_SIZE                 0x2000
 110 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 111 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 112 #define CONFIG_ENV_IS_IN_REMOTE
 113 #define CONFIG_ENV_ADDR         0xffe20000
 114 #define CONFIG_ENV_SIZE         0x2000
 115 #elif defined(CONFIG_ENV_IS_NOWHERE)
 116 #define CONFIG_ENV_SIZE         0x2000
 117 #else
 118 #define CONFIG_ENV_IS_IN_FLASH
 119 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 120 #define CONFIG_ENV_SIZE         0x2000
 121 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 122 #endif
 123
 124 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 125 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 126
 127 #ifndef __ASSEMBLY__
 128 unsigned long get_board_sys_clk(void);
 129 unsigned long get_board_ddr_clk(void);
 130 #endif
 131
 132 /* EEPROM */
 133 #define CONFIG_ID_EEPROM
 134 #define CONFIG_SYS_I2C_EEPROM_NXID
 135 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 136 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 137 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 138
 139 /*
 140  * DDR Setup
 141  */
 142 #define CONFIG_SYS_SPD_BUS_NUM  0
 143 #define SPD_EEPROM_ADDRESS1     0x51
 144 #define SPD_EEPROM_ADDRESS2     0x52
 145 #define SPD_EEPROM_ADDRESS3     0x53
 146 #define SPD_EEPROM_ADDRESS4     0x54
 147 #define SPD_EEPROM_ADDRESS5     0x55
 148 #define SPD_EEPROM_ADDRESS6     0x56
 149 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 150 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 151
 152 /*
 153  * IFC Definitions
 154  */
 155 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 156 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 157                                 + 0x8000000) | \
 158                                 CSPR_PORT_SIZE_16 | \
 159                                 CSPR_MSEL_NOR | \
 160                                 CSPR_V)
 161 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 162 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 163                                 CSPR_PORT_SIZE_16 | \
 164                                 CSPR_MSEL_NOR | \
 165                                 CSPR_V)
 166 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 167 /* NOR Flash Timing Params */
 168 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 169
 170 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 171                                 FTIM0_NOR_TEADC(0x5) | \
 172                                 FTIM0_NOR_TEAHC(0x5))
 173 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 174                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 175                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 176 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 177                                 FTIM2_NOR_TCH(0x4) | \
 178                                 FTIM2_NOR_TWPH(0x0E) | \
 179                                 FTIM2_NOR_TWP(0x1c))
 180 #define CONFIG_SYS_NOR_FTIM3    0x0
 181
 182 #define CONFIG_SYS_FLASH_QUIET_TEST
 183 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 184
 185 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 186 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 187 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 188 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 189
 190 #define CONFIG_SYS_FLASH_EMPTY_INFO
 191 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 192                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 193
 194 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 195 #define QIXIS_BASE                      0xffdf0000
 196 #define QIXIS_LBMAP_SWITCH              6
 197 #define QIXIS_LBMAP_MASK                0x0f
 198 #define QIXIS_LBMAP_SHIFT               0
 199 #define QIXIS_LBMAP_DFLTBANK            0x00
 200 #define QIXIS_LBMAP_ALTBANK             0x04
 201 #define QIXIS_RST_CTL_RESET             0x83
 202 #define QIXIS_RST_FORCE_MEM             0x1
 203 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 204 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 205 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 206 #define QIXIS_BRDCFG5                   0x55
 207 #define QIXIS_MUX_SDHC                  2
 208 #define QIXIS_MUX_SDHC_WIDTH8           1
 209 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 210
 211 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 212 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 213                                 | CSPR_PORT_SIZE_8 \
 214                                 | CSPR_MSEL_GPCM \
 215                                 | CSPR_V)
 216 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 217 #define CONFIG_SYS_CSOR3        0x0
 218 /* QIXIS Timing parameters for IFC CS3 */
 219 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 220                                         FTIM0_GPCM_TEADC(0x0e) | \
 221                                         FTIM0_GPCM_TEAHC(0x0e))
 222 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 223                                         FTIM1_GPCM_TRAD(0x3f))
 224 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 225                                         FTIM2_GPCM_TCH(0x8) | \
 226                                         FTIM2_GPCM_TWP(0x1f))
 227 #define CONFIG_SYS_CS3_FTIM3            0x0
 228
 229 /* NAND Flash on IFC */
 230 #define CONFIG_NAND_FSL_IFC
 231 #define CONFIG_SYS_NAND_BASE            0xff800000
 232 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 233
 234 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 235 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 236                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 237                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 238                                 | CSPR_V)
 239 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 240
 241 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 242                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 243                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 244                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 245                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 246                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 247                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 248
 249 #define CONFIG_SYS_NAND_ONFI_DETECTION
 250
 251 /* ONFI NAND Flash mode0 Timing Params */
 252 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 253                                         FTIM0_NAND_TWP(0x18)   | \
 254                                         FTIM0_NAND_TWCHT(0x07) | \
 255                                         FTIM0_NAND_TWH(0x0a))
 256 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 257                                         FTIM1_NAND_TWBE(0x39)  | \
 258                                         FTIM1_NAND_TRR(0x0e)   | \
 259                                         FTIM1_NAND_TRP(0x18))
 260 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 261                                         FTIM2_NAND_TREH(0x0a) | \
 262                                         FTIM2_NAND_TWHRE(0x1e))
 263 #define CONFIG_SYS_NAND_FTIM3           0x0
 264
 265 #define CONFIG_SYS_NAND_DDR_LAW         11
 266
 267 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 268 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 269 #define CONFIG_CMD_NAND
 270
 271 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 272 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 273 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 274
 275 #if defined(CONFIG_NAND)
 276 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 277 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 278 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 279 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 280 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 281 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 282 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 283 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 284 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 285 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 286 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 287 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 288 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 289 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 290 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 291 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 292 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 293 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 294 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 295 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 296 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 297 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 298 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 299 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 300 #else
 301 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 302 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 303 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 304 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 305 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 306 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 307 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 308 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 309 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 310 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 311 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 312 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 313 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 314 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 315 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 316 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 317 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 318 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 319 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 320 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 321 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 322 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 323 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 324 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 325 #endif
 326
 327 #if defined(CONFIG_RAMBOOT_PBL)
 328 #define CONFIG_SYS_RAMBOOT
 329 #endif
 330
 331 /* I2C */
 332 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 333 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 334 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 335 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 336
 337 #define I2C_MUX_CH_DEFAULT      0x8
 338 #define I2C_MUX_CH_VOL_MONITOR  0xa
 339 #define I2C_MUX_CH_VSC3316_FS   0xc
 340 #define I2C_MUX_CH_VSC3316_BS   0xd
 341
 342 /* Voltage monitor on channel 2*/
 343 #define I2C_VOL_MONITOR_ADDR            0x40
 344 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 345 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 346 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 347
 348 /* VSC Crossbar switches */
 349 #define CONFIG_VSC_CROSSBAR
 350 #define VSC3316_FSM_TX_ADDR     0x70
 351 #define VSC3316_FSM_RX_ADDR     0x71
 352
 353 /*
 354  * RapidIO
 355  */
 356
 357 /*
 358  * for slave u-boot IMAGE instored in master memory space,
 359  * PHYS must be aligned based on the SIZE
 360  */
 361 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 362 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 363 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 364 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 365 /*
 366  * for slave UCODE and ENV instored in master memory space,
 367  * PHYS must be aligned based on the SIZE
 368  */
 369 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 370 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 371 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 372
 373 /* slave core release by master*/
 374 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 375 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 376
 377 /*
 378  * SRIO_PCIE_BOOT - SLAVE
 379  */
 380 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 381 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 382 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 383                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 384 #endif
 385 /*
 386  * eSPI - Enhanced SPI
 387  */
 388 #define CONFIG_SF_DEFAULT_SPEED         10000000
 389 #define CONFIG_SF_DEFAULT_MODE          0
 390
 391 /* Qman/Bman */
 392 #ifndef CONFIG_NOBQFMAN
 393 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 394 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 395 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 396 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 397 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 398 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 399 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 400 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 401 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 402 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 403                                         CONFIG_SYS_BMAN_CENA_SIZE)
 404 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 405 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 406 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 407 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 408 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 409 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 410 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 411 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 412 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 413 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 414 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 415                                         CONFIG_SYS_QMAN_CENA_SIZE)
 416 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 417 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 418
 419 #define CONFIG_SYS_DPAA_FMAN
 420 #define CONFIG_SYS_DPAA_PME
 421 #define CONFIG_SYS_PMAN
 422 #define CONFIG_SYS_DPAA_DCE
 423 #define CONFIG_SYS_DPAA_RMAN
 424 #define CONFIG_SYS_INTERLAKEN
 425
 426 /* Default address of microcode for the Linux Fman driver */
 427 #if defined(CONFIG_SPIFLASH)
 428 /*
 429  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 430  * env, so we got 0x110000.
 431  */
 432 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 433 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 434 #elif defined(CONFIG_SDCARD)
 435 /*
 436  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 437  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 438  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 439  */
 440 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 441 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 442 #elif defined(CONFIG_NAND)
 443 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 444 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 445 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 446 /*
 447  * Slave has no ucode locally, it can fetch this from remote. When implementing
 448  * in two corenet boards, slave's ucode could be stored in master's memory
 449  * space, the address can be mapped from slave TLB->slave LAW->
 450  * slave SRIO or PCIE outbound window->master inbound window->
 451  * master LAW->the ucode address in master's memory space.
 452  */
 453 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 454 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 455 #else
 456 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 457 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 458 #endif
 459 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 460 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 461 #endif /* CONFIG_NOBQFMAN */
 462
 463 #ifdef CONFIG_SYS_DPAA_FMAN
 464 #define CONFIG_FMAN_ENET
 465 #define CONFIG_PHYLIB_10G
 466 #define CONFIG_PHY_VITESSE
 467 #define CONFIG_PHY_TERANETICS
 468 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 469 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 470 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 471 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 472 #define FM1_10GEC1_PHY_ADDR     0x0
 473 #define FM1_10GEC2_PHY_ADDR     0x1
 474 #define FM2_10GEC1_PHY_ADDR     0x2
 475 #define FM2_10GEC2_PHY_ADDR     0x3
 476 #endif
 477
 478 /* SATA */
 479 #ifdef CONFIG_FSL_SATA_V2
 480 #define CONFIG_LIBATA
 481 #define CONFIG_FSL_SATA
 482
 483 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 484 #define CONFIG_SATA1
 485 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 486 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 487 #define CONFIG_SATA2
 488 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 489 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 490
 491 #define CONFIG_LBA48
 492 #define CONFIG_CMD_SATA
 493 #endif
 494
 495 #ifdef CONFIG_FMAN_ENET
 496 #define CONFIG_MII              /* MII PHY management */
 497 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 498 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 499 #endif
 500
 501 /*
 502 * USB
 503 */
 504 #define CONFIG_USB_EHCI_FSL
 505 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 506 #define CONFIG_HAS_FSL_DR_USB
 507
 508 #ifdef CONFIG_MMC
 509 #define CONFIG_FSL_ESDHC
 510 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 511 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 512 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 513 #define CONFIG_ESDHC_DETECT_QUIRK \
 514         (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \
 515         IS_SVR_REV(get_svr(), 1, 0))
 516 #define CONFIG_ESDHC_DETECT_8_BIT_QUIRK \
 517         (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC_WIDTH8))
 518 #endif
 519
 520
 521 #define __USB_PHY_TYPE  utmi
 522
 523 /*
 524  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 525  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 526  * interleaving. It can be cacheline, page, bank, superbank.
 527  * See doc/README.fsl-ddr for details.
 528  */
 529 #ifdef CONFIG_ARCH_T4240
 530 #define CTRL_INTLV_PREFERED 3way_4KB
 531 #else
 532 #define CTRL_INTLV_PREFERED cacheline
 533 #endif
 534
 535 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 536         "hwconfig=fsl_ddr:"                                     \
 537         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 538         "bank_intlv=auto;"                                      \
 539         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 540         "netdev=eth0\0"                                         \
 541         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 542         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
 543         "tftpflash=tftpboot $loadaddr $uboot && "               \
 544         "protect off $ubootaddr +$filesize && "                 \
 545         "erase $ubootaddr +$filesize && "                       \
 546         "cp.b $loadaddr $ubootaddr $filesize && "               \
 547         "protect on $ubootaddr +$filesize && "                  \
 548         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 549         "consoledev=ttyS0\0"                                    \
 550         "ramdiskaddr=2000000\0"                                 \
 551         "ramdiskfile=t4240qds/ramdisk.uboot\0"                  \
 552         "fdtaddr=1e00000\0"                                     \
 553         "fdtfile=t4240qds/t4240qds.dtb\0"                               \
 554         "bdev=sda3\0"
 555
 556 #define CONFIG_HVBOOT                           \
 557         "setenv bootargs config-addr=0x60000000; "      \
 558         "bootm 0x01000000 - 0x00f00000"
 559
 560 #define CONFIG_ALU                              \
 561         "setenv bootargs root=/dev/$bdev rw "           \
 562         "console=$consoledev,$baudrate $othbootargs;"   \
 563         "cpu 1 release 0x01000000 - - -;"               \
 564         "cpu 2 release 0x01000000 - - -;"               \
 565         "cpu 3 release 0x01000000 - - -;"               \
 566         "cpu 4 release 0x01000000 - - -;"               \
 567         "cpu 5 release 0x01000000 - - -;"               \
 568         "cpu 6 release 0x01000000 - - -;"               \
 569         "cpu 7 release 0x01000000 - - -;"               \
 570         "go 0x01000000"
 571
 572 #define CONFIG_LINUX                            \
 573         "setenv bootargs root=/dev/ram rw "             \
 574         "console=$consoledev,$baudrate $othbootargs;"   \
 575         "setenv ramdiskaddr 0x02000000;"                \
 576         "setenv fdtaddr 0x00c00000;"                    \
 577         "setenv loadaddr 0x1000000;"                    \
 578         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 579
 580 #define CONFIG_HDBOOT                                   \
 581         "setenv bootargs root=/dev/$bdev rw "           \
 582         "console=$consoledev,$baudrate $othbootargs;"   \
 583         "tftp $loadaddr $bootfile;"                     \
 584         "tftp $fdtaddr $fdtfile;"                       \
 585         "bootm $loadaddr - $fdtaddr"
 586
 587 #define CONFIG_NFSBOOTCOMMAND                   \
 588         "setenv bootargs root=/dev/nfs rw "     \
 589         "nfsroot=$serverip:$rootpath "          \
 590         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 591         "console=$consoledev,$baudrate $othbootargs;"   \
 592         "tftp $loadaddr $bootfile;"             \
 593         "tftp $fdtaddr $fdtfile;"               \
 594         "bootm $loadaddr - $fdtaddr"
 595
 596 #define CONFIG_RAMBOOTCOMMAND                           \
 597         "setenv bootargs root=/dev/ram rw "             \
 598         "console=$consoledev,$baudrate $othbootargs;"   \
 599         "tftp $ramdiskaddr $ramdiskfile;"               \
 600         "tftp $loadaddr $bootfile;"                     \
 601         "tftp $fdtaddr $fdtfile;"                       \
 602         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 603
 604 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 605
 606 #include <asm/fsl_secure_boot.h>
 607
 608 #endif  /* __CONFIG_H */