include/configs/T4240RDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T4240 RDB board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_T4240RDB
  14 #define CONFIG_DISPLAY_BOARDINFO
  15
  16 #define CONFIG_FSL_SATA_V2
  17 #define CONFIG_PCIE4
  18
  19 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  20
  21 #ifdef CONFIG_RAMBOOT_PBL
  22 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
  23 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg
  24 #ifndef CONFIG_SDCARD
  25 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  26 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  27 #else
  28 #define CONFIG_SPL_FLUSH_IMAGE
  29 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  30 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  31 #define CONFIG_SYS_TEXT_BASE            0x00201000
  32 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  33 #define CONFIG_SPL_PAD_TO               0x40000
  34 #define CONFIG_SPL_MAX_SIZE             0x28000
  35 #define RESET_VECTOR_OFFSET             0x27FFC
  36 #define BOOT_PAGE_OFFSET                0x27000
  37
  38 #ifdef  CONFIG_SDCARD
  39 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  40 #define CONFIG_SPL_MMC_MINIMAL
  41 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  42 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  43 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  44 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  45 #ifndef CONFIG_SPL_BUILD
  46 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  47 #endif
  48 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  49 #define CONFIG_SPL_MMC_BOOT
  50 #endif
  51
  52 #ifdef CONFIG_SPL_BUILD
  53 #define CONFIG_SPL_SKIP_RELOCATE
  54 #define CONFIG_SPL_COMMON_INIT_DDR
  55 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  56 #define CONFIG_SYS_NO_FLASH
  57 #endif
  58
  59 #endif
  60 #endif /* CONFIG_RAMBOOT_PBL */
  61
  62 #define CONFIG_DDR_ECC
  63
  64 #define CONFIG_CMD_REGINFO
  65
  66 /* High Level Configuration Options */
  67 #define CONFIG_BOOKE
  68 #define CONFIG_E500                     /* BOOKE e500 family */
  69 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  70 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  71 #define CONFIG_MP                       /* support multiple processors */
  72
  73 #ifndef CONFIG_SYS_TEXT_BASE
  74 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  75 #endif
  76
  77 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  78 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  79 #endif
  80
  81 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  82 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  83 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  84 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  85 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  86 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  87 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  88 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  89 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  90 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  91
  92 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  93
  94 #define CONFIG_ENV_OVERWRITE
  95
  96 /*
  97  * These can be toggled for performance analysis, otherwise use default.
  98  */
  99 #define CONFIG_SYS_CACHE_STASHING
 100 #define CONFIG_BTB                      /* toggle branch predition */
 101 #ifdef CONFIG_DDR_ECC
 102 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 103 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 104 #endif
 105
 106 #define CONFIG_ENABLE_36BIT_PHYS
 107
 108 #define CONFIG_ADDR_MAP
 109 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 110
 111 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 112 #define CONFIG_SYS_MEMTEST_END          0x00400000
 113 #define CONFIG_SYS_ALT_MEMTEST
 114 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 115
 116 /*
 117  *  Config the L3 Cache as L3 SRAM
 118  */
 119 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 120 #define CONFIG_SYS_L3_SIZE              (512 << 10)
 121 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 122 #ifdef CONFIG_RAMBOOT_PBL
 123 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 124 #endif
 125 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 126 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 127 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 128 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 129
 130 #define CONFIG_SYS_DCSRBAR              0xf0000000
 131 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 132
 133 /*
 134  * DDR Setup
 135  */
 136 #define CONFIG_VERY_BIG_RAM
 137 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 138 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 139
 140 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 141 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 142 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 143 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 144
 145 #define CONFIG_DDR_SPD
 146 #define CONFIG_SYS_FSL_DDR3
 147
 148 /*
 149  * IFC Definitions
 150  */
 151 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 152 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 153
 154 #ifdef CONFIG_SPL_BUILD
 155 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 156 #else
 157 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 158 #endif
 159
 160 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 161 #define CONFIG_MISC_INIT_R
 162
 163 #define CONFIG_HWCONFIG
 164
 165 /* define to use L1 as initial stack */
 166 #define CONFIG_L1_INIT_RAM
 167 #define CONFIG_SYS_INIT_RAM_LOCK
 168 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 169 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 170 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 171 /* The assembler doesn't like typecast */
 172 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 173         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 174           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 175 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 176
 177 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 178                                         GENERATED_GBL_DATA_SIZE)
 179 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 180
 181 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 182 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 183
 184 /* Serial Port - controlled on board with jumper J8
 185  * open - index 2
 186  * shorted - index 1
 187  */
 188 #define CONFIG_CONS_INDEX       1
 189 #define CONFIG_SYS_NS16550_SERIAL
 190 #define CONFIG_SYS_NS16550_REG_SIZE     1
 191 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 192
 193 #define CONFIG_SYS_BAUDRATE_TABLE       \
 194         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 195
 196 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 197 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 198 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 199 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 200
 201 /* I2C */
 202 #define CONFIG_SYS_I2C
 203 #define CONFIG_SYS_I2C_FSL
 204 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 205 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 206 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 207 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 208
 209 /*
 210  * General PCI
 211  * Memory space is mapped 1-1, but I/O space must start from 0.
 212  */
 213
 214 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 215 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 216 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 217 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 218 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 219 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 220 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 221 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 222 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 223
 224 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 225 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 226 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 227 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 228 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 229 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 230 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 231 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 232 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 233
 234 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 235 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 236 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 237 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 238 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 239 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 240 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 241 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 242 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 243
 244 /* controller 4, Base address 203000 */
 245 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 246 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 247 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 248 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 249 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 250 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 251
 252 #ifdef CONFIG_PCI
 253 #define CONFIG_PCI_INDIRECT_BRIDGE
 254 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 255
 256 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 257 #define CONFIG_DOS_PARTITION
 258 #endif  /* CONFIG_PCI */
 259
 260 /* SATA */
 261 #ifdef CONFIG_FSL_SATA_V2
 262 #define CONFIG_LIBATA
 263 #define CONFIG_FSL_SATA
 264
 265 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 266 #define CONFIG_SATA1
 267 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 268 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 269 #define CONFIG_SATA2
 270 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 271 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 272
 273 #define CONFIG_LBA48
 274 #define CONFIG_CMD_SATA
 275 #define CONFIG_DOS_PARTITION
 276 #endif
 277
 278 #ifdef CONFIG_FMAN_ENET
 279 #define CONFIG_MII              /* MII PHY management */
 280 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 281 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 282 #endif
 283
 284 /*
 285  * Environment
 286  */
 287 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 288 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 289
 290 /*
 291  * Command line configuration.
 292  */
 293 #define CONFIG_CMD_ERRATA
 294 #define CONFIG_CMD_IRQ
 295
 296 #ifdef CONFIG_PCI
 297 #define CONFIG_CMD_PCI
 298 #endif
 299
 300 /*
 301  * Miscellaneous configurable options
 302  */
 303 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 304 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 305 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 306 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 307 #ifdef CONFIG_CMD_KGDB
 308 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 309 #else
 310 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 311 #endif
 312 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 313 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 314 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 315
 316 /*
 317  * For booting Linux, the board info and command line data
 318  * have to be in the first 64 MB of memory, since this is
 319  * the maximum mapped by the Linux kernel during initialization.
 320  */
 321 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 322 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 323
 324 #ifdef CONFIG_CMD_KGDB
 325 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 326 #endif
 327
 328 /*
 329  * Environment Configuration
 330  */
 331 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 332 #define CONFIG_BOOTFILE         "uImage"
 333 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 334
 335 /* default location for tftp and bootm */
 336 #define CONFIG_LOADADDR         1000000
 337
 338 #define CONFIG_BAUDRATE 115200
 339
 340 #define CONFIG_HVBOOT                                   \
 341         "setenv bootargs config-addr=0x60000000; "      \
 342         "bootm 0x01000000 - 0x00f00000"
 343
 344 #ifdef CONFIG_SYS_NO_FLASH
 345 #ifndef CONFIG_RAMBOOT_PBL
 346 #define CONFIG_ENV_IS_NOWHERE
 347 #endif
 348 #else
 349 #define CONFIG_FLASH_CFI_DRIVER
 350 #define CONFIG_SYS_FLASH_CFI
 351 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 352 #endif
 353
 354 #if defined(CONFIG_SPIFLASH)
 355 #define CONFIG_SYS_EXTRA_ENV_RELOC
 356 #define CONFIG_ENV_IS_IN_SPI_FLASH
 357 #define CONFIG_ENV_SPI_BUS              0
 358 #define CONFIG_ENV_SPI_CS               0
 359 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 360 #define CONFIG_ENV_SPI_MODE             0
 361 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 362 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 363 #define CONFIG_ENV_SECT_SIZE            0x10000
 364 #elif defined(CONFIG_SDCARD)
 365 #define CONFIG_SYS_EXTRA_ENV_RELOC
 366 #define CONFIG_ENV_IS_IN_MMC
 367 #define CONFIG_SYS_MMC_ENV_DEV          0
 368 #define CONFIG_ENV_SIZE                 0x2000
 369 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 370 #elif defined(CONFIG_NAND)
 371 #define CONFIG_SYS_EXTRA_ENV_RELOC
 372 #define CONFIG_ENV_IS_IN_NAND
 373 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 374 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 375 #elif defined(CONFIG_ENV_IS_NOWHERE)
 376 #define CONFIG_ENV_SIZE         0x2000
 377 #else
 378 #define CONFIG_ENV_IS_IN_FLASH
 379 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 380 #define CONFIG_ENV_SIZE         0x2000
 381 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 382 #endif
 383
 384 #define CONFIG_SYS_CLK_FREQ     66666666
 385 #define CONFIG_DDR_CLK_FREQ     133333333
 386
 387 #ifndef __ASSEMBLY__
 388 unsigned long get_board_sys_clk(void);
 389 unsigned long get_board_ddr_clk(void);
 390 #endif
 391
 392 /*
 393  * DDR Setup
 394  */
 395 #define CONFIG_SYS_SPD_BUS_NUM  0
 396 #define SPD_EEPROM_ADDRESS1     0x52
 397 #define SPD_EEPROM_ADDRESS2     0x54
 398 #define SPD_EEPROM_ADDRESS3     0x56
 399 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 400 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 401
 402 /*
 403  * IFC Definitions
 404  */
 405 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 406 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 407                                 + 0x8000000) | \
 408                                 CSPR_PORT_SIZE_16 | \
 409                                 CSPR_MSEL_NOR | \
 410                                 CSPR_V)
 411 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 412 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 413                                 CSPR_PORT_SIZE_16 | \
 414                                 CSPR_MSEL_NOR | \
 415                                 CSPR_V)
 416 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 417 /* NOR Flash Timing Params */
 418 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 419
 420 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 421                                 FTIM0_NOR_TEADC(0x5) | \
 422                                 FTIM0_NOR_TEAHC(0x5))
 423 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 424                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 425                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 426 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 427                                 FTIM2_NOR_TCH(0x4) | \
 428                                 FTIM2_NOR_TWPH(0x0E) | \
 429                                 FTIM2_NOR_TWP(0x1c))
 430 #define CONFIG_SYS_NOR_FTIM3    0x0
 431
 432 #define CONFIG_SYS_FLASH_QUIET_TEST
 433 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 434
 435 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 436 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 437 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 438 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 439
 440 #define CONFIG_SYS_FLASH_EMPTY_INFO
 441 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 442                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 443
 444 /* NAND Flash on IFC */
 445 #define CONFIG_NAND_FSL_IFC
 446 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 447 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 448 #define CONFIG_SYS_NAND_BASE            0xff800000
 449 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 450
 451 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 452 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 453                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 454                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 455                                 | CSPR_V)
 456 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 457
 458 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 459                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 460                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 461                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 462                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 463                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 464                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 465
 466 #define CONFIG_SYS_NAND_ONFI_DETECTION
 467
 468 /* ONFI NAND Flash mode0 Timing Params */
 469 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 470                                         FTIM0_NAND_TWP(0x18)   | \
 471                                         FTIM0_NAND_TWCHT(0x07) | \
 472                                         FTIM0_NAND_TWH(0x0a))
 473 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 474                                         FTIM1_NAND_TWBE(0x39)  | \
 475                                         FTIM1_NAND_TRR(0x0e)   | \
 476                                         FTIM1_NAND_TRP(0x18))
 477 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 478                                         FTIM2_NAND_TREH(0x0a) | \
 479                                         FTIM2_NAND_TWHRE(0x1e))
 480 #define CONFIG_SYS_NAND_FTIM3           0x0
 481
 482 #define CONFIG_SYS_NAND_DDR_LAW         11
 483 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 484 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 485 #define CONFIG_CMD_NAND
 486
 487 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 488
 489 #if defined(CONFIG_NAND)
 490 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 491 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 492 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 493 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 494 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 495 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 496 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 497 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 498 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 499 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 500 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 501 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 502 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 503 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 504 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 505 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 506 #else
 507 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 508 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 509 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 510 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 511 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 512 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 513 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 514 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 515 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 516 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 517 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 518 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 519 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 520 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 521 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 522 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 523 #endif
 524 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 525 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 526 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 527 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 528 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 529 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 530 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 531 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 532
 533 /* CPLD on IFC */
 534 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 535 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 536 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 537 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 538                                 | CSPR_PORT_SIZE_8 \
 539                                 | CSPR_MSEL_GPCM \
 540                                 | CSPR_V)
 541
 542 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 543 #define CONFIG_SYS_CSOR3        0x0
 544
 545 /* CPLD Timing parameters for IFC CS3 */
 546 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 547                                         FTIM0_GPCM_TEADC(0x0e) | \
 548                                         FTIM0_GPCM_TEAHC(0x0e))
 549 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 550                                         FTIM1_GPCM_TRAD(0x1f))
 551 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 552                                         FTIM2_GPCM_TCH(0x8) | \
 553                                         FTIM2_GPCM_TWP(0x1f))
 554 #define CONFIG_SYS_CS3_FTIM3            0x0
 555
 556 #if defined(CONFIG_RAMBOOT_PBL)
 557 #define CONFIG_SYS_RAMBOOT
 558 #endif
 559
 560 /* I2C */
 561 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 562 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 563 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 564 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 565
 566 #define I2C_MUX_CH_DEFAULT      0x8
 567 #define I2C_MUX_CH_VOL_MONITOR  0xa
 568 #define I2C_MUX_CH_VSC3316_FS   0xc
 569 #define I2C_MUX_CH_VSC3316_BS   0xd
 570
 571 /* Voltage monitor on channel 2*/
 572 #define I2C_VOL_MONITOR_ADDR            0x40
 573 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 574 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 575 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 576
 577 #define CONFIG_VID_FLS_ENV              "t4240rdb_vdd_mv"
 578 #ifndef CONFIG_SPL_BUILD
 579 #define CONFIG_VID
 580 #endif
 581 #define CONFIG_VOL_MONITOR_IR36021_SET
 582 #define CONFIG_VOL_MONITOR_IR36021_READ
 583 /* The lowest and highest voltage allowed for T4240RDB */
 584 #define VDD_MV_MIN                      819
 585 #define VDD_MV_MAX                      1212
 586
 587 /*
 588  * eSPI - Enhanced SPI
 589  */
 590 #define CONFIG_SF_DEFAULT_SPEED         10000000
 591 #define CONFIG_SF_DEFAULT_MODE          0
 592
 593 /* Qman/Bman */
 594 #ifndef CONFIG_NOBQFMAN
 595 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 596 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 597 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 598 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 599 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 600 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 601 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 602 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 603 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 604 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 605                                         CONFIG_SYS_BMAN_CENA_SIZE)
 606 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 607 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 608 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 609 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 610 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 611 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 612 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 613 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 614 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 615 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 616 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 617                                         CONFIG_SYS_QMAN_CENA_SIZE)
 618 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 619 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 620
 621 #define CONFIG_SYS_DPAA_FMAN
 622 #define CONFIG_SYS_DPAA_PME
 623 #define CONFIG_SYS_PMAN
 624 #define CONFIG_SYS_DPAA_DCE
 625 #define CONFIG_SYS_DPAA_RMAN
 626 #define CONFIG_SYS_INTERLAKEN
 627
 628 /* Default address of microcode for the Linux Fman driver */
 629 #if defined(CONFIG_SPIFLASH)
 630 /*
 631  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 632  * env, so we got 0x110000.
 633  */
 634 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 635 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 636 #elif defined(CONFIG_SDCARD)
 637 /*
 638  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 639  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 640  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 641  */
 642 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 643 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 644 #elif defined(CONFIG_NAND)
 645 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 646 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 647 #else
 648 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 649 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 650 #endif
 651 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 652 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 653 #endif /* CONFIG_NOBQFMAN */
 654
 655 #ifdef CONFIG_SYS_DPAA_FMAN
 656 #define CONFIG_FMAN_ENET
 657 #define CONFIG_PHYLIB_10G
 658 #define CONFIG_PHY_VITESSE
 659 #define CONFIG_PHY_CORTINA
 660 #define CONFIG_SYS_CORTINA_FW_IN_NOR
 661 #define CONFIG_CORTINA_FW_ADDR          0xefe00000
 662 #define CONFIG_CORTINA_FW_LENGTH        0x40000
 663 #define CONFIG_PHY_TERANETICS
 664 #define SGMII_PHY_ADDR1 0x0
 665 #define SGMII_PHY_ADDR2 0x1
 666 #define SGMII_PHY_ADDR3 0x2
 667 #define SGMII_PHY_ADDR4 0x3
 668 #define SGMII_PHY_ADDR5 0x4
 669 #define SGMII_PHY_ADDR6 0x5
 670 #define SGMII_PHY_ADDR7 0x6
 671 #define SGMII_PHY_ADDR8 0x7
 672 #define FM1_10GEC1_PHY_ADDR     0x10
 673 #define FM1_10GEC2_PHY_ADDR     0x11
 674 #define FM2_10GEC1_PHY_ADDR     0x12
 675 #define FM2_10GEC2_PHY_ADDR     0x13
 676 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 677 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 678 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 679 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 680 #endif
 681
 682 /* SATA */
 683 #ifdef CONFIG_FSL_SATA_V2
 684 #define CONFIG_LIBATA
 685 #define CONFIG_FSL_SATA
 686
 687 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 688 #define CONFIG_SATA1
 689 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 690 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 691 #define CONFIG_SATA2
 692 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 693 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 694
 695 #define CONFIG_LBA48
 696 #define CONFIG_CMD_SATA
 697 #define CONFIG_DOS_PARTITION
 698 #endif
 699
 700 #ifdef CONFIG_FMAN_ENET
 701 #define CONFIG_MII              /* MII PHY management */
 702 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 703 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 704 #endif
 705
 706 /*
 707 * USB
 708 */
 709 #define CONFIG_USB_EHCI
 710 #define CONFIG_USB_EHCI_FSL
 711 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 712 #define CONFIG_HAS_FSL_DR_USB
 713
 714 #define CONFIG_MMC
 715
 716 #ifdef CONFIG_MMC
 717 #define CONFIG_FSL_ESDHC
 718 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 719 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 720 #define CONFIG_GENERIC_MMC
 721 #define CONFIG_DOS_PARTITION
 722 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 723 #endif
 724
 725 /* Hash command with SHA acceleration supported in hardware */
 726 #ifdef CONFIG_FSL_CAAM
 727 #define CONFIG_CMD_HASH
 728 #define CONFIG_SHA_HW_ACCEL
 729 #endif
 730
 731
 732 #define __USB_PHY_TYPE  utmi
 733
 734 /*
 735  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 736  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 737  * interleaving. It can be cacheline, page, bank, superbank.
 738  * See doc/README.fsl-ddr for details.
 739  */
 740 #ifdef CONFIG_PPC_T4240
 741 #define CTRL_INTLV_PREFERED 3way_4KB
 742 #else
 743 #define CTRL_INTLV_PREFERED cacheline
 744 #endif
 745
 746 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 747         "hwconfig=fsl_ddr:"                                     \
 748         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 749         "bank_intlv=auto;"                                      \
 750         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 751         "netdev=eth0\0"                                         \
 752         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 753         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 754         "tftpflash=tftpboot $loadaddr $uboot && "               \
 755         "protect off $ubootaddr +$filesize && "                 \
 756         "erase $ubootaddr +$filesize && "                       \
 757         "cp.b $loadaddr $ubootaddr $filesize && "               \
 758         "protect on $ubootaddr +$filesize && "                  \
 759         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 760         "consoledev=ttyS0\0"                                    \
 761         "ramdiskaddr=2000000\0"                                 \
 762         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 763         "fdtaddr=1e00000\0"                                     \
 764         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 765         "bdev=sda3\0"
 766
 767 #define CONFIG_HVBOOT                                   \
 768         "setenv bootargs config-addr=0x60000000; "      \
 769         "bootm 0x01000000 - 0x00f00000"
 770
 771 #define CONFIG_LINUX                                    \
 772         "setenv bootargs root=/dev/ram rw "             \
 773         "console=$consoledev,$baudrate $othbootargs;"   \
 774         "setenv ramdiskaddr 0x02000000;"                \
 775         "setenv fdtaddr 0x00c00000;"                    \
 776         "setenv loadaddr 0x1000000;"                    \
 777         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 778
 779 #define CONFIG_HDBOOT                                   \
 780         "setenv bootargs root=/dev/$bdev rw "           \
 781         "console=$consoledev,$baudrate $othbootargs;"   \
 782         "tftp $loadaddr $bootfile;"                     \
 783         "tftp $fdtaddr $fdtfile;"                       \
 784         "bootm $loadaddr - $fdtaddr"
 785
 786 #define CONFIG_NFSBOOTCOMMAND                   \
 787         "setenv bootargs root=/dev/nfs rw "     \
 788         "nfsroot=$serverip:$rootpath "          \
 789         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 790         "console=$consoledev,$baudrate $othbootargs;"   \
 791         "tftp $loadaddr $bootfile;"             \
 792         "tftp $fdtaddr $fdtfile;"               \
 793         "bootm $loadaddr - $fdtaddr"
 794
 795 #define CONFIG_RAMBOOTCOMMAND                           \
 796         "setenv bootargs root=/dev/ram rw "             \
 797         "console=$consoledev,$baudrate $othbootargs;"   \
 798         "tftp $ramdiskaddr $ramdiskfile;"               \
 799         "tftp $loadaddr $bootfile;"                     \
 800         "tftp $fdtaddr $fdtfile;"                       \
 801         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 802
 803 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 804
 805 #include <asm/fsl_secure_boot.h>
 806
 807 #endif  /* __CONFIG_H */