]> git.ipfire.org Git - thirdparty/u-boot.git/blob - include/configs/UCP1020.h
projects / thirdparty / u-boot.git / blob
? search:


5086077afb5a67bc8e1b85a1d8a6f96fbd6f3dc6
[thirdparty/u-boot.git] / include / configs / UCP1020.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3 * Copyright 2013-2019 Arcturus Networks, Inc.
4 * https://www.arcturusnetworks.com/products/ucp1020/
5 * based on include/configs/p1_p2_rdb_pc.h
6 * original copyright follows:
7 * Copyright 2009-2011 Freescale Semiconductor, Inc.
8 */
9
10 /*
11 * QorIQ uCP1020-xx boards configuration file
12 */
13 #ifndef __CONFIG_H
14 #define __CONFIG_H
15
16 /*** Arcturus FirmWare Environment */
17
18 #define MAX_SERIAL_SIZE 15
19 #define MAX_HWADDR_SIZE 17
20
21 #define MAX_FWENV_ADDR 4
22
23 #define FWENV_MMC 1
24 #define FWENV_SPI_FLASH 2
25 #define FWENV_NOR_FLASH 3
26 /*
27 #define FWENV_TYPE FWENV_MMC
28 #define FWENV_TYPE FWENV_SPI_FLASH
29 */
30 #define FWENV_TYPE FWENV_NOR_FLASH
31
32 #if (FWENV_TYPE == FWENV_MMC)
33 #ifndef CONFIG_SYS_MMC_ENV_DEV
34 #define CONFIG_SYS_MMC_ENV_DEV 1
35 #endif
36 #define FWENV_ADDR1 -1
37 #define FWENV_ADDR2 -1
38 #define FWENV_ADDR3 -1
39 #define FWENV_ADDR4 -1
40 #define EMPY_CHAR 0
41 #endif
42
43 #if (FWENV_TYPE == FWENV_SPI_FLASH)
44 #ifndef CONFIG_SF_DEFAULT_SPEED
45 #define CONFIG_SF_DEFAULT_SPEED 1000000
46 #endif
47 #ifndef CONFIG_SF_DEFAULT_MODE
48 #define CONFIG_SF_DEFAULT_MODE SPI_MODE0
49 #endif
50 #ifndef CONFIG_SF_DEFAULT_CS
51 #define CONFIG_SF_DEFAULT_CS 0
52 #endif
53 #ifndef CONFIG_SF_DEFAULT_BUS
54 #define CONFIG_SF_DEFAULT_BUS 0
55 #endif
56 #define FWENV_ADDR1 (0x200 - sizeof(smac))
57 #define FWENV_ADDR2 (0x400 - sizeof(smac))
58 #define FWENV_ADDR3 (CONFIG_ENV_SECT_SIZE + 0x200 - sizeof(smac))
59 #define FWENV_ADDR4 (CONFIG_ENV_SECT_SIZE + 0x400 - sizeof(smac))
60 #define EMPY_CHAR 0xff
61 #endif
62
63 #if (FWENV_TYPE == FWENV_NOR_FLASH)
64 #define FWENV_ADDR1 0xEC080000
65 #define FWENV_ADDR2 -1
66 #define FWENV_ADDR3 -1
67 #define FWENV_ADDR4 -1
68 #define EMPY_CHAR 0xff
69 #endif
70 /***********************************/
71
72 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
73 #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
74 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
75 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
76 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
77
78 #if defined(CONFIG_TARTGET_UCP1020T1)
79
80 #define CONFIG_UCP1020_REV_1_3
81
82 #define CONFIG_BOARDNAME "uCP1020-64EE512-0U1-XR-T1"
83
84 #define CONFIG_TSEC1
85 #define CONFIG_TSEC3
86 #define CONFIG_HAS_ETH0
87 #define CONFIG_HAS_ETH1
88 #define CONFIG_ETHADDR 00:19:D3:FF:FF:FF
89 #define CONFIG_ETH1ADDR 00:19:D3:FF:FF:FE
90 #define CONFIG_ETH2ADDR 00:19:D3:FF:FF:FD
91 #define CONFIG_IPADDR 10.80.41.229
92 #define CONFIG_SERVERIP 10.80.41.227
93 #define CONFIG_NETMASK 255.255.252.0
94 #define CONFIG_ETHPRIME "eTSEC3"
95
96 #define CONFIG_SYS_L2_SIZE (256 << 10)
97
98 #endif
99
100 #if defined(CONFIG_TARGET_UCP1020)
101
102 #define CONFIG_UCP1020
103 #define CONFIG_UCP1020_REV_1_3
104
105 #define CONFIG_BOARDNAME_LOCAL "uCP1020-64EEE512-OU1-XR"
106
107 #define CONFIG_TSEC1
108 #define CONFIG_TSEC3
109 #define CONFIG_HAS_ETH0
110 #define CONFIG_HAS_ETH1
111 #define CONFIG_HAS_ETH2
112 #define CONFIG_ETHADDR 00:06:3B:FF:FF:FF
113 #define CONFIG_ETH1ADDR 00:06:3B:FF:FF:FE
114 #define CONFIG_ETH2ADDR 00:06:3B:FF:FF:FD
115 #define CONFIG_IPADDR 192.168.1.81
116 #define CONFIG_IPADDR1 192.168.1.82
117 #define CONFIG_IPADDR2 192.168.1.83
118 #define CONFIG_SERVERIP 192.168.1.80
119 #define CONFIG_GATEWAYIP 102.168.1.1
120 #define CONFIG_NETMASK 255.255.255.0
121 #define CONFIG_ETHPRIME "eTSEC1"
122
123 #define CONFIG_SYS_L2_SIZE (256 << 10)
124
125 #endif
126
127 #ifdef CONFIG_SDCARD
128 #define CONFIG_RAMBOOT_SDCARD
129 #define CONFIG_SYS_RAMBOOT
130 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
131 #endif
132
133 #ifdef CONFIG_SPIFLASH
134 #define CONFIG_RAMBOOT_SPIFLASH
135 #define CONFIG_SYS_RAMBOOT
136 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
137 #endif
138
139 #define CONFIG_SYS_TEXT_BASE_NOR 0xeff80000
140
141 #ifndef CONFIG_RESET_VECTOR_ADDRESS
142 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
143 #endif
144
145 #ifndef CONFIG_SYS_MONITOR_BASE
146 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
147 #endif
148
149 #define CONFIG_ENV_OVERWRITE
150
151 #define CONFIG_SYS_SATA_MAX_DEVICE 2
152 #define CONFIG_LBA48
153
154 #define CONFIG_SYS_CLK_FREQ 66666666
155 #define CONFIG_DDR_CLK_FREQ 66666666
156
157 #define CONFIG_HWCONFIG
158
159 /*
160 * These can be toggled for performance analysis, otherwise use default.
161 */
162 #define CONFIG_L2_CACHE
163 #define CONFIG_BTB
164
165 #define CONFIG_ENABLE_36BIT_PHYS
166
167 #define CONFIG_SYS_CCSRBAR 0xffe00000
168 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
169
170 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
171 SPL code*/
172 #ifdef CONFIG_SPL_BUILD
173 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
174 #endif
175
176 /* DDR Setup */
177 #define CONFIG_DDR_ECC_ENABLE
178 #ifndef CONFIG_DDR_ECC_ENABLE
179 #define CONFIG_SYS_DDR_RAW_TIMING
180 #define CONFIG_DDR_SPD
181 #endif
182 #define CONFIG_SYS_SPD_BUS_NUM 1
183
184 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_512M
185 #define CONFIG_CHIP_SELECTS_PER_CTRL 1
186 #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
187 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
188 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
189
190 #define CONFIG_DIMM_SLOTS_PER_CTLR 1
191
192 /* Default settings for DDR3 */
193 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
194 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
195 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
196 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f
197 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302
198 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000
199
200 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
201 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
202 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
203 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
204
205 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
206 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608
207 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000
208 #define CONFIG_SYS_DDR_RCW_1 0x00000000
209 #define CONFIG_SYS_DDR_RCW_2 0x00000000
210 #ifdef CONFIG_DDR_ECC_ENABLE
211 #define CONFIG_SYS_DDR_CONTROL 0xE70C0000 /* Type = DDR3 & ECC */
212 #else
213 #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */
214 #endif
215 #define CONFIG_SYS_DDR_CONTROL_2 0x04401050
216 #define CONFIG_SYS_DDR_TIMING_4 0x00220001
217 #define CONFIG_SYS_DDR_TIMING_5 0x03402400
218
219 #define CONFIG_SYS_DDR_TIMING_3 0x00020000
220 #define CONFIG_SYS_DDR_TIMING_0 0x00330004
221 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846
222 #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF
223 #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000
224 #define CONFIG_SYS_DDR_MODE_1 0x40461520
225 #define CONFIG_SYS_DDR_MODE_2 0x8000c000
226 #define CONFIG_SYS_DDR_INTERVAL 0x0C300000
227
228 #undef CONFIG_CLOCKS_IN_MHZ
229
230 /*
231 * Memory map
232 *
233 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable
234 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1G non-cacheable(PCIe * 2)
235 * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1
236 * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 256K cacheable
237 * (early boot only)
238 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable
239 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable
240 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
241 */
242
243 /*
244 * Local Bus Definitions
245 */
246 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */
247 #define CONFIG_SYS_FLASH_BASE 0xec000000
248
249 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
250
251 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
252 | BR_PS_16 | BR_V)
253
254 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7
255
256 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
257 #define CONFIG_SYS_FLASH_QUIET_TEST
258 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
259
260 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
261
262 #undef CONFIG_SYS_FLASH_CHECKSUM
263 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
264 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
265
266 #define CONFIG_SYS_FLASH_EMPTY_INFO
267
268 #define CONFIG_SYS_INIT_RAM_LOCK
269 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
270 /* Initial L1 address */
271 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR
272 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
273 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
274 /* Size of used area in RAM */
275 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
276
277 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
278 GENERATED_GBL_DATA_SIZE)
279 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
280
281 #define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Mon */
282 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */
283
284 #define CONFIG_SYS_PMC_BASE 0xff980000
285 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE
286 #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
287 BR_PS_8 | BR_V)
288 #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
289 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
290 OR_GPCM_EAD)
291
292 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
293 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
294 #ifdef CONFIG_NAND_FSL_ELBC
295 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
296 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
297 #endif
298
299 /* Serial Port - controlled on board with jumper J8
300 * open - index 2
301 * shorted - index 1
302 */
303 #undef CONFIG_SERIAL_SOFTWARE_FIFO
304 #define CONFIG_SYS_NS16550_SERIAL
305 #define CONFIG_SYS_NS16550_REG_SIZE 1
306 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
307 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
308 #define CONFIG_NS16550_MIN_FUNCTIONS
309 #endif
310
311 #define CONFIG_SYS_BAUDRATE_TABLE \
312 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
313
314 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
315 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
316
317 /* I2C */
318 #define CONFIG_SYS_I2C
319 #define CONFIG_SYS_I2C_FSL
320 #define CONFIG_SYS_FSL_I2C_SPEED 400000
321 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
322 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
323 #define CONFIG_SYS_FSL_I2C2_SPEED 400000
324 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
325 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
326 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} }
327 #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */
328
329 #define CONFIG_RTC_DS1337
330 #define CONFIG_RTC_DS1337_NOOSC
331 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
332 #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18
333 #define CONFIG_SYS_I2C_NCT72_ADDR 0x4C
334 #define CONFIG_SYS_I2C_IDT6V49205B 0x69
335
336 #if defined(CONFIG_PCI)
337 /*
338 * General PCI
339 * Memory space is mapped 1-1, but I/O space must start from 0.
340 */
341
342 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
343 #define CONFIG_SYS_PCIE2_NAME "PCIe SLOT CON9"
344 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
345 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
346 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
347 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
348 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
349 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
350 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
351 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
352
353 /* controller 1, Slot 2, tgtid 1, Base address a000 */
354 #define CONFIG_SYS_PCIE1_NAME "PCIe SLOT CON10"
355 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
356 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
357 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
358 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
359 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
360 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
361 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000
362 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
363
364 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
365 #endif /* CONFIG_PCI */
366
367 /*
368 * Environment
369 */
370 #if !defined(CONFIG_ENV_FIT_UCBOOT) && defined(CONFIG_RAMBOOT_SDCARD)
371 #define CONFIG_FSL_FIXED_MMC_LOCATION
372 #define CONFIG_SYS_MMC_ENV_DEV 0
373 #endif
374
375 #define CONFIG_LOADS_ECHO /* echo on for serial download */
376 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
377
378 /*
379 * USB
380 */
381 #define CONFIG_HAS_FSL_DR_USB
382
383 #if defined(CONFIG_HAS_FSL_DR_USB)
384 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
385
386 #ifdef CONFIG_USB_EHCI_HCD
387 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
388 #define CONFIG_USB_EHCI_FSL
389 #endif
390 #endif
391
392 #undef CONFIG_WATCHDOG /* watchdog disabled */
393
394 #ifdef CONFIG_MMC
395 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
396 #endif
397
398 /* Misc Extra Settings */
399 #undef CONFIG_WATCHDOG /* watchdog disabled */
400
401 /*
402 * Miscellaneous configurable options
403 */
404 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
405 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */
406
407 /*
408 * For booting Linux, the board info and command line data
409 * have to be in the first 64 MB of memory, since this is
410 * the maximum mapped by the Linux kernel during initialization.
411 */
412 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/
413 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
414
415 #if defined(CONFIG_CMD_KGDB)
416 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
417 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
418 #endif
419
420 /*
421 * Environment Configuration
422 */
423
424 #if defined(CONFIG_TSEC_ENET)
425
426 #if defined(CONFIG_UCP1020_REV_1_2) || defined(CONFIG_UCP1020_REV_1_3)
427 #else
428 #error "UCP1020 module revision is not defined !!!"
429 #endif
430
431 #define CONFIG_BOOTP_SERVERIP
432
433 #define CONFIG_TSEC1_NAME "eTSEC1"
434 #define CONFIG_TSEC2_NAME "eTSEC2"
435 #define CONFIG_TSEC3_NAME "eTSEC3"
436
437 #define TSEC1_PHY_ADDR 4
438 #define TSEC2_PHY_ADDR 0
439 #define TSEC2_PHY_ADDR_SGMII 0x00
440 #define TSEC3_PHY_ADDR 6
441
442 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
443 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
444 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
445
446 #define TSEC1_PHYIDX 0
447 #define TSEC2_PHYIDX 0
448 #define TSEC3_PHYIDX 0
449
450 #endif
451
452 #define CONFIG_HOSTNAME "UCP1020"
453 #define CONFIG_ROOTPATH "/opt/nfsroot"
454 #define CONFIG_BOOTFILE "uImage"
455 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
456
457 /* default location for tftp and bootm */
458 #define CONFIG_LOADADDR 1000000
459
460 #if defined(CONFIG_DONGLE)
461
462 #define CONFIG_EXTRA_ENV_SETTINGS \
463 "bootcmd=run prog_spi_mbrbootcramfs\0" \
464 "bootfile=uImage\0" \
465 "consoledev=ttyS0\0" \
466 "cramfsfile=image.cramfs\0" \
467 "dtbaddr=0x00c00000\0" \
468 "dtbfile=image.dtb\0" \
469 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
470 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
471 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
472 "fileaddr=0x01000000\0" \
473 "filesize=0x00080000\0" \
474 "flashmbr=sf probe 0; " \
475 "tftp $loadaddr $mbr; " \
476 "sf erase $mbr_offset +$filesize; " \
477 "sf write $loadaddr $mbr_offset $filesize\0" \
478 "flashrecovery=tftp $recoveryaddr $cramfsfile; " \
479 "protect off $nor_recoveryaddr +$filesize; " \
480 "erase $nor_recoveryaddr +$filesize; " \
481 "cp.b $recoveryaddr $nor_recoveryaddr $filesize; " \
482 "protect on $nor_recoveryaddr +$filesize\0 " \
483 "flashuboot=tftp $ubootaddr $ubootfile; " \
484 "protect off $nor_ubootaddr +$filesize; " \
485 "erase $nor_ubootaddr +$filesize; " \
486 "cp.b $ubootaddr $nor_ubootaddr $filesize; " \
487 "protect on $nor_ubootaddr +$filesize\0 " \
488 "flashworking=tftp $workingaddr $cramfsfile; " \
489 "protect off $nor_workingaddr +$filesize; " \
490 "erase $nor_workingaddr +$filesize; " \
491 "cp.b $workingaddr $nor_workingaddr $filesize; " \
492 "protect on $nor_workingaddr +$filesize\0 " \
493 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
494 "kerneladdr=0x01100000\0" \
495 "kernelfile=uImage\0" \
496 "loadaddr=0x01000000\0" \
497 "mbr=uCP1020d.mbr\0" \
498 "mbr_offset=0x00000000\0" \
499 "mmbr=uCP1020Quiet.mbr\0" \
500 "mmcpart=0:2\0" \
501 "mmc__mbrd=fatload mmc $mmcpart $loadaddr $mbr; " \
502 "mmc erase 1 1; " \
503 "mmc write $loadaddr 1 1\0" \
504 "mmc__uboot=fatload mmc $mmcpart $loadaddr $ubootfile; " \
505 "mmc erase 0x40 0x400; " \
506 "mmc write $loadaddr 0x40 0x400\0" \
507 "netdev=eth0\0" \
508 "nor_recoveryaddr=0xEC0A0000\0" \
509 "nor_ubootaddr=0xEFF80000\0" \
510 "nor_workingaddr=0xECFA0000\0" \
511 "norbootrecovery=setenv bootargs $recoverybootargs" \
512 " console=$consoledev,$baudrate $othbootargs; " \
513 "run norloadrecovery; " \
514 "bootm $kerneladdr - $dtbaddr\0" \
515 "norbootworking=setenv bootargs $workingbootargs" \
516 " console=$consoledev,$baudrate $othbootargs; " \
517 "run norloadworking; " \
518 "bootm $kerneladdr - $dtbaddr\0" \
519 "norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; " \
520 "setenv cramfsaddr $nor_recoveryaddr; " \
521 "cramfsload $dtbaddr $dtbfile; " \
522 "cramfsload $kerneladdr $kernelfile\0" \
523 "norloadworking=mw.l $kerneladdr 0x0 0x00a00000; " \
524 "setenv cramfsaddr $nor_workingaddr; " \
525 "cramfsload $dtbaddr $dtbfile; " \
526 "cramfsload $kerneladdr $kernelfile\0" \
527 "prog_spi_mbr=run spi__mbr\0" \
528 "prog_spi_mbrboot=run spi__mbr; run spi__boot1; run spi__boot2\0" \
529 "prog_spi_mbrbootcramfs=run spi__mbr; run spi__boot1; run spi__boot2; " \
530 "run spi__cramfs\0" \
531 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
532 " console=$consoledev,$baudrate $othbootargs; " \
533 "tftp $rootfsaddr $rootfsfile; " \
534 "tftp $loadaddr $kernelfile; " \
535 "tftp $dtbaddr $dtbfile; " \
536 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
537 "ramdisk_size=120000\0" \
538 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
539 "recoveryaddr=0x02F00000\0" \
540 "recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0" \
541 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
542 "mw.l 0xffe0f008 0x00400000\0" \
543 "rootfsaddr=0x02F00000\0" \
544 "rootfsfile=rootfs.ext2.gz.uboot\0" \
545 "rootpath=/opt/nfsroot\0" \
546 "spi__boot1=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
547 "protect off 0xeC000000 +$filesize; " \
548 "erase 0xEC000000 +$filesize; " \
549 "cp.b $loadaddr 0xEC000000 $filesize; " \
550 "cmp.b $loadaddr 0xEC000000 $filesize; " \
551 "protect on 0xeC000000 +$filesize\0" \
552 "spi__boot2=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
553 "protect off 0xeFF80000 +$filesize; " \
554 "erase 0xEFF80000 +$filesize; " \
555 "cp.b $loadaddr 0xEFF80000 $filesize; " \
556 "cmp.b $loadaddr 0xEFF80000 $filesize; " \
557 "protect on 0xeFF80000 +$filesize\0" \
558 "spi__bootd=fatload mmc $mmcpart $loadaddr $ubootd; " \
559 "sf probe 0; sf erase 0x8000 +$filesize; " \
560 "sf write $loadaddr 0x8000 $filesize\0" \
561 "spi__cramfs=fatload mmc $mmcpart $loadaddr image.cramfs; " \
562 "protect off 0xec0a0000 +$filesize; " \
563 "erase 0xeC0A0000 +$filesize; " \
564 "cp.b $loadaddr 0xeC0A0000 $filesize; " \
565 "protect on 0xec0a0000 +$filesize\0" \
566 "spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; " \
567 "sf probe 1; sf erase 0 +$filesize; " \
568 "sf write $loadaddr 0 $filesize\0" \
569 "spi__mbrd=fatload mmc $mmcpart $loadaddr $mbr; " \
570 "sf probe 0; sf erase 0 +$filesize; " \
571 "sf write $loadaddr 0 $filesize\0" \
572 "tftpflash=tftpboot $loadaddr $uboot; " \
573 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
574 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
575 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
576 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
577 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
578 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
579 "ubootaddr=0x01000000\0" \
580 "ubootfile=u-boot.bin\0" \
581 "ubootd=u-boot4dongle.bin\0" \
582 "upgrade=run flashworking\0" \
583 "usb_phy_type=ulpi\0 " \
584 "workingaddr=0x02F00000\0" \
585 "workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
586
587 #else
588
589 #if defined(CONFIG_UCP1020T1)
590
591 #define CONFIG_EXTRA_ENV_SETTINGS \
592 "bootcmd=run releasefpga; run norbootworking || run norbootrecovery\0" \
593 "bootfile=uImage\0" \
594 "consoledev=ttyS0\0" \
595 "cramfsfile=image.cramfs\0" \
596 "dtbaddr=0x00c00000\0" \
597 "dtbfile=image.dtb\0" \
598 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
599 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
600 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
601 "fileaddr=0x01000000\0" \
602 "filesize=0x00080000\0" \
603 "flashmbr=sf probe 0; " \
604 "tftp $loadaddr $mbr; " \
605 "sf erase $mbr_offset +$filesize; " \
606 "sf write $loadaddr $mbr_offset $filesize\0" \
607 "flashrecovery=tftp $recoveryaddr $cramfsfile; " \
608 "protect off $nor_recoveryaddr +$filesize; " \
609 "erase $nor_recoveryaddr +$filesize; " \
610 "cp.b $recoveryaddr $nor_recoveryaddr $filesize; " \
611 "protect on $nor_recoveryaddr +$filesize\0 " \
612 "flashuboot=tftp $ubootaddr $ubootfile; " \
613 "protect off $nor_ubootaddr +$filesize; " \
614 "erase $nor_ubootaddr +$filesize; " \
615 "cp.b $ubootaddr $nor_ubootaddr $filesize; " \
616 "protect on $nor_ubootaddr +$filesize\0 " \
617 "flashworking=tftp $workingaddr $cramfsfile; " \
618 "protect off $nor_workingaddr +$filesize; " \
619 "erase $nor_workingaddr +$filesize; " \
620 "cp.b $workingaddr $nor_workingaddr $filesize; " \
621 "protect on $nor_workingaddr +$filesize\0 " \
622 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
623 "kerneladdr=0x01100000\0" \
624 "kernelfile=uImage\0" \
625 "loadaddr=0x01000000\0" \
626 "mbr=uCP1020.mbr\0" \
627 "mbr_offset=0x00000000\0" \
628 "netdev=eth0\0" \
629 "nor_recoveryaddr=0xEC0A0000\0" \
630 "nor_ubootaddr=0xEFF80000\0" \
631 "nor_workingaddr=0xECFA0000\0" \
632 "norbootrecovery=setenv bootargs $recoverybootargs" \
633 " console=$consoledev,$baudrate $othbootargs; " \
634 "run norloadrecovery; " \
635 "bootm $kerneladdr - $dtbaddr\0" \
636 "norbootworking=setenv bootargs $workingbootargs" \
637 " console=$consoledev,$baudrate $othbootargs; " \
638 "run norloadworking; " \
639 "bootm $kerneladdr - $dtbaddr\0" \
640 "norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; " \
641 "setenv cramfsaddr $nor_recoveryaddr; " \
642 "cramfsload $dtbaddr $dtbfile; " \
643 "cramfsload $kerneladdr $kernelfile\0" \
644 "norloadworking=mw.l $kerneladdr 0x0 0x00a00000; " \
645 "setenv cramfsaddr $nor_workingaddr; " \
646 "cramfsload $dtbaddr $dtbfile; " \
647 "cramfsload $kerneladdr $kernelfile\0" \
648 "othbootargs=quiet\0" \
649 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
650 " console=$consoledev,$baudrate $othbootargs; " \
651 "tftp $rootfsaddr $rootfsfile; " \
652 "tftp $loadaddr $kernelfile; " \
653 "tftp $dtbaddr $dtbfile; " \
654 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
655 "ramdisk_size=120000\0" \
656 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
657 "recoveryaddr=0x02F00000\0" \
658 "recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0" \
659 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
660 "mw.l 0xffe0f008 0x00400000\0" \
661 "rootfsaddr=0x02F00000\0" \
662 "rootfsfile=rootfs.ext2.gz.uboot\0" \
663 "rootpath=/opt/nfsroot\0" \
664 "silent=1\0" \
665 "tftpflash=tftpboot $loadaddr $uboot; " \
666 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
667 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
668 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
669 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
670 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
671 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
672 "ubootaddr=0x01000000\0" \
673 "ubootfile=u-boot.bin\0" \
674 "upgrade=run flashworking\0" \
675 "workingaddr=0x02F00000\0" \
676 "workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
677
678 #else /* For Arcturus Modules */
679
680 #define CONFIG_EXTRA_ENV_SETTINGS \
681 "bootcmd=run norkernel\0" \
682 "bootfile=uImage\0" \
683 "consoledev=ttyS0\0" \
684 "dtbaddr=0x00c00000\0" \
685 "dtbfile=image.dtb\0" \
686 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
687 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
688 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
689 "fileaddr=0x01000000\0" \
690 "filesize=0x00080000\0" \
691 "flashmbr=sf probe 0; " \
692 "tftp $loadaddr $mbr; " \
693 "sf erase $mbr_offset +$filesize; " \
694 "sf write $loadaddr $mbr_offset $filesize\0" \
695 "flashuboot=tftp $loadaddr $ubootfile; " \
696 "protect off $nor_ubootaddr0 +$filesize; " \
697 "erase $nor_ubootaddr0 +$filesize; " \
698 "cp.b $loadaddr $nor_ubootaddr0 $filesize; " \
699 "protect on $nor_ubootaddr0 +$filesize; " \
700 "protect off $nor_ubootaddr1 +$filesize; " \
701 "erase $nor_ubootaddr1 +$filesize; " \
702 "cp.b $loadaddr $nor_ubootaddr1 $filesize; " \
703 "protect on $nor_ubootaddr1 +$filesize\0 " \
704 "format0=protect off $part0base +$part0size; " \
705 "erase $part0base +$part0size\0" \
706 "format1=protect off $part1base +$part1size; " \
707 "erase $part1base +$part1size\0" \
708 "format2=protect off $part2base +$part2size; " \
709 "erase $part2base +$part2size\0" \
710 "format3=protect off $part3base +$part3size; " \
711 "erase $part3base +$part3size\0" \
712 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
713 "kerneladdr=0x01100000\0" \
714 "kernelargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0" \
715 "kernelfile=uImage\0" \
716 "loadaddr=0x01000000\0" \
717 "mbr=uCP1020.mbr\0" \
718 "mbr_offset=0x00000000\0" \
719 "netdev=eth0\0" \
720 "nor_ubootaddr0=0xEC000000\0" \
721 "nor_ubootaddr1=0xEFF80000\0" \
722 "norkernel=setenv bootargs $kernelargs console=$consoledev,$baudrate; " \
723 "run norkernelload; " \
724 "bootm $kerneladdr - $dtbaddr\0" \
725 "norkernelload=mw.l $kerneladdr 0x0 0x00a00000; " \
726 "setenv cramfsaddr $part0base; " \
727 "cramfsload $dtbaddr $dtbfile; " \
728 "cramfsload $kerneladdr $kernelfile\0" \
729 "part0base=0xEC100000\0" \
730 "part0size=0x00700000\0" \
731 "part1base=0xEC800000\0" \
732 "part1size=0x02000000\0" \
733 "part2base=0xEE800000\0" \
734 "part2size=0x00800000\0" \
735 "part3base=0xEF000000\0" \
736 "part3size=0x00F80000\0" \
737 "partENVbase=0xEC080000\0" \
738 "partENVsize=0x00080000\0" \
739 "program0=tftp part0-000000.bin; " \
740 "protect off $part0base +$filesize; " \
741 "erase $part0base +$filesize; " \
742 "cp.b $loadaddr $part0base $filesize; " \
743 "echo Verifying...; " \
744 "cmp.b $loadaddr $part0base $filesize\0" \
745 "program1=tftp part1-000000.bin; " \
746 "protect off $part1base +$filesize; " \
747 "erase $part1base +$filesize; " \
748 "cp.b $loadaddr $part1base $filesize; " \
749 "echo Verifying...; " \
750 "cmp.b $loadaddr $part1base $filesize\0" \
751 "program2=tftp part2-000000.bin; " \
752 "protect off $part2base +$filesize; " \
753 "erase $part2base +$filesize; " \
754 "cp.b $loadaddr $part2base $filesize; " \
755 "echo Verifying...; " \
756 "cmp.b $loadaddr $part2base $filesize\0" \
757 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
758 " console=$consoledev,$baudrate $othbootargs; " \
759 "tftp $rootfsaddr $rootfsfile; " \
760 "tftp $loadaddr $kernelfile; " \
761 "tftp $dtbaddr $dtbfile; " \
762 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
763 "ramdisk_size=120000\0" \
764 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
765 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
766 "mw.l 0xffe0f008 0x00400000\0" \
767 "rootfsaddr=0x02F00000\0" \
768 "rootfsfile=rootfs.ext2.gz.uboot\0" \
769 "rootpath=/opt/nfsroot\0" \
770 "spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; " \
771 "sf probe 0; sf erase 0 +$filesize; " \
772 "sf write $loadaddr 0 $filesize\0" \
773 "spi__boot=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
774 "protect off 0xeC000000 +$filesize; " \
775 "erase 0xEC000000 +$filesize; " \
776 "cp.b $loadaddr 0xEC000000 $filesize; " \
777 "cmp.b $loadaddr 0xEC000000 $filesize; " \
778 "protect on 0xeC000000 +$filesize\0" \
779 "tftpflash=tftpboot $loadaddr $uboot; " \
780 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
781 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
782 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
783 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
784 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
785 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
786 "ubootfile=u-boot.bin\0" \
787 "upgrade=run flashuboot\0" \
788 "usb_phy_type=ulpi\0 " \
789 "boot_nfs= " \
790 "setenv bootargs root=/dev/nfs rw " \
791 "nfsroot=$serverip:$rootpath " \
792 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
793 "console=$consoledev,$baudrate $othbootargs;" \
794 "tftp $loadaddr $bootfile;" \
795 "tftp $fdtaddr $fdtfile;" \
796 "bootm $loadaddr - $fdtaddr\0" \
797 "boot_hd = " \
798 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \
799 "console=$consoledev,$baudrate $othbootargs;" \
800 "usb start;" \
801 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \
802 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \
803 "bootm $loadaddr - $fdtaddr\0" \
804 "boot_usb_fat = " \
805 "setenv bootargs root=/dev/ram rw " \
806 "console=$consoledev,$baudrate $othbootargs " \
807 "ramdisk_size=$ramdisk_size;" \
808 "usb start;" \
809 "fatload usb 0:2 $loadaddr $bootfile;" \
810 "fatload usb 0:2 $fdtaddr $fdtfile;" \
811 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \
812 "bootm $loadaddr $ramdiskaddr $fdtaddr\0 " \
813 "boot_usb_ext2 = " \
814 "setenv bootargs root=/dev/ram rw " \
815 "console=$consoledev,$baudrate $othbootargs " \
816 "ramdisk_size=$ramdisk_size;" \
817 "usb start;" \
818 "ext2load usb 0:4 $loadaddr $bootfile;" \
819 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
820 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
821 "bootm $loadaddr $ramdiskaddr $fdtaddr\0 " \
822 "boot_nor = " \
823 "setenv bootargs root=/dev/$jffs2nor rw " \
824 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \
825 "bootm $norbootaddr - $norfdtaddr\0 " \
826 "boot_ram = " \
827 "setenv bootargs root=/dev/ram rw " \
828 "console=$consoledev,$baudrate $othbootargs " \
829 "ramdisk_size=$ramdisk_size;" \
830 "tftp $ramdiskaddr $ramdiskfile;" \
831 "tftp $loadaddr $bootfile;" \
832 "tftp $fdtaddr $fdtfile;" \
833 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"
834
835 #endif
836 #endif
837
838 #endif /* __CONFIG_H */
"Das U-Boot" Source Tree