]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/UCP1020.h
projects / people / ms / u-boot.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'master' of git://git.denx.de/u-boot-video
[people/ms/u-boot.git] / include / configs / UCP1020.h
1 /*
2 * Copyright 2013-2015 Arcturus Networks, Inc.
3 * http://www.arcturusnetworks.com/products/ucp1020/
4 * based on include/configs/p1_p2_rdb_pc.h
5 * original copyright follows:
6 * Copyright 2009-2011 Freescale Semiconductor, Inc.
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11 /*
12 * QorIQ uCP1020-xx boards configuration file
13 */
14 #ifndef __CONFIG_H
15 #define __CONFIG_H
16
17 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
18 #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
19 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
20 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
21 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
22 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
23
24 #if defined(CONFIG_TARTGET_UCP1020T1)
25
26 #define CONFIG_UCP1020_REV_1_3
27
28 #define CONFIG_BOARDNAME "uCP1020-64EE512-0U1-XR-T1"
29
30 #define CONFIG_TSEC_ENET
31 #define CONFIG_TSEC1
32 #define CONFIG_TSEC3
33 #define CONFIG_HAS_ETH0
34 #define CONFIG_HAS_ETH1
35 #define CONFIG_ETHADDR 00:19:D3:FF:FF:FF
36 #define CONFIG_ETH1ADDR 00:19:D3:FF:FF:FE
37 #define CONFIG_ETH2ADDR 00:19:D3:FF:FF:FD
38 #define CONFIG_IPADDR 10.80.41.229
39 #define CONFIG_SERVERIP 10.80.41.227
40 #define CONFIG_NETMASK 255.255.252.0
41 #define CONFIG_ETHPRIME "eTSEC3"
42
43 #ifndef CONFIG_SPI_FLASH
44 #endif
45 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
46
47 #define CONFIG_SYS_L2_SIZE (256 << 10)
48
49 #define CONFIG_LAST_STAGE_INIT
50
51 #endif
52
53 #if defined(CONFIG_TARGET_UCP1020)
54
55 #define CONFIG_UCP1020
56 #define CONFIG_UCP1020_REV_1_3
57
58 #define CONFIG_BOARDNAME_LOCAL "uCP1020-64EEE512-OU1-XR"
59
60 #define CONFIG_TSEC_ENET
61 #define CONFIG_TSEC1
62 #define CONFIG_TSEC2
63 #define CONFIG_TSEC3
64 #define CONFIG_HAS_ETH0
65 #define CONFIG_HAS_ETH1
66 #define CONFIG_HAS_ETH2
67 #define CONFIG_ETHADDR 00:06:3B:FF:FF:FF
68 #define CONFIG_ETH1ADDR 00:06:3B:FF:FF:FE
69 #define CONFIG_ETH2ADDR 00:06:3B:FF:FF:FD
70 #define CONFIG_IPADDR 192.168.1.81
71 #define CONFIG_IPADDR1 192.168.1.82
72 #define CONFIG_IPADDR2 192.168.1.83
73 #define CONFIG_SERVERIP 192.168.1.80
74 #define CONFIG_GATEWAYIP 102.168.1.1
75 #define CONFIG_NETMASK 255.255.255.0
76 #define CONFIG_ETHPRIME "eTSEC1"
77
78 #ifndef CONFIG_SPI_FLASH
79 #endif
80 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
81
82 #define CONFIG_SYS_L2_SIZE (256 << 10)
83
84 #define CONFIG_LAST_STAGE_INIT
85
86 #endif
87
88 #ifdef CONFIG_SDCARD
89 #define CONFIG_RAMBOOT_SDCARD
90 #define CONFIG_SYS_RAMBOOT
91 #define CONFIG_SYS_EXTRA_ENV_RELOC
92 #define CONFIG_SYS_TEXT_BASE 0x11000000
93 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
94 #endif
95
96 #ifdef CONFIG_SPIFLASH
97 #define CONFIG_RAMBOOT_SPIFLASH
98 #define CONFIG_SYS_RAMBOOT
99 #define CONFIG_SYS_EXTRA_ENV_RELOC
100 #define CONFIG_SYS_TEXT_BASE 0x11000000
101 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
102 #endif
103
104 #ifndef CONFIG_SYS_TEXT_BASE
105 #define CONFIG_SYS_TEXT_BASE 0xeff80000
106 #endif
107 #define CONFIG_SYS_TEXT_BASE_NOR 0xeff80000
108
109 #ifndef CONFIG_RESET_VECTOR_ADDRESS
110 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
111 #endif
112
113 #ifndef CONFIG_SYS_MONITOR_BASE
114 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
115 #endif
116
117 #define CONFIG_MP
118
119 #define CONFIG_ENV_OVERWRITE
120
121 #define CONFIG_CMD_SATA
122 #define CONFIG_SATA_SIL
123 #define CONFIG_SYS_SATA_MAX_DEVICE 2
124 #define CONFIG_LIBATA
125 #define CONFIG_LBA48
126
127 #define CONFIG_SYS_CLK_FREQ 66666666
128 #define CONFIG_DDR_CLK_FREQ 66666666
129
130 #define CONFIG_HWCONFIG
131
132 /*
133 * These can be toggled for performance analysis, otherwise use default.
134 */
135 #define CONFIG_L2_CACHE
136 #define CONFIG_BTB
137
138 #define CONFIG_ENABLE_36BIT_PHYS
139
140 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
141 #define CONFIG_SYS_MEMTEST_END 0x1fffffff
142 #define CONFIG_PANIC_HANG /* do not reset board on panic */
143
144 #define CONFIG_SYS_CCSRBAR 0xffe00000
145 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
146
147 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
148 SPL code*/
149 #ifdef CONFIG_SPL_BUILD
150 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
151 #endif
152
153 /* DDR Setup */
154 #define CONFIG_DDR_ECC_ENABLE
155 #ifndef CONFIG_DDR_ECC_ENABLE
156 #define CONFIG_SYS_DDR_RAW_TIMING
157 #define CONFIG_DDR_SPD
158 #endif
159 #define CONFIG_SYS_SPD_BUS_NUM 1
160 #undef CONFIG_FSL_DDR_INTERACTIVE
161
162 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_512M
163 #define CONFIG_CHIP_SELECTS_PER_CTRL 1
164 #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
165 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
166 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
167
168 #define CONFIG_DIMM_SLOTS_PER_CTLR 1
169
170 /* Default settings for DDR3 */
171 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
172 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
173 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
174 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f
175 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302
176 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000
177
178 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
179 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
180 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
181 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
182
183 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
184 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608
185 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000
186 #define CONFIG_SYS_DDR_RCW_1 0x00000000
187 #define CONFIG_SYS_DDR_RCW_2 0x00000000
188 #ifdef CONFIG_DDR_ECC_ENABLE
189 #define CONFIG_SYS_DDR_CONTROL 0xE70C0000 /* Type = DDR3 & ECC */
190 #else
191 #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */
192 #endif
193 #define CONFIG_SYS_DDR_CONTROL_2 0x04401050
194 #define CONFIG_SYS_DDR_TIMING_4 0x00220001
195 #define CONFIG_SYS_DDR_TIMING_5 0x03402400
196
197 #define CONFIG_SYS_DDR_TIMING_3 0x00020000
198 #define CONFIG_SYS_DDR_TIMING_0 0x00330004
199 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846
200 #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF
201 #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000
202 #define CONFIG_SYS_DDR_MODE_1 0x40461520
203 #define CONFIG_SYS_DDR_MODE_2 0x8000c000
204 #define CONFIG_SYS_DDR_INTERVAL 0x0C300000
205
206 #undef CONFIG_CLOCKS_IN_MHZ
207
208 /*
209 * Memory map
210 *
211 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable
212 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1G non-cacheable(PCIe * 2)
213 * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1
214 * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 256K cacheable
215 * (early boot only)
216 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable
217 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable
218 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
219 */
220
221 /*
222 * Local Bus Definitions
223 */
224 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */
225 #define CONFIG_SYS_FLASH_BASE 0xec000000
226
227 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
228
229 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
230 | BR_PS_16 | BR_V)
231
232 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7
233
234 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
235 #define CONFIG_SYS_FLASH_QUIET_TEST
236 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
237
238 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
239
240 #undef CONFIG_SYS_FLASH_CHECKSUM
241 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
242 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
243
244 #define CONFIG_FLASH_CFI_DRIVER
245 #define CONFIG_SYS_FLASH_CFI
246 #define CONFIG_SYS_FLASH_EMPTY_INFO
247 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
248
249 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
250
251 #define CONFIG_SYS_INIT_RAM_LOCK
252 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
253 /* Initial L1 address */
254 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR
255 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
256 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
257 /* Size of used area in RAM */
258 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
259
260 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
261 GENERATED_GBL_DATA_SIZE)
262 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
263
264 #define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Mon */
265 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */
266
267 #define CONFIG_SYS_PMC_BASE 0xff980000
268 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE
269 #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
270 BR_PS_8 | BR_V)
271 #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
272 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
273 OR_GPCM_EAD)
274
275 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
276 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
277 #ifdef CONFIG_NAND_FSL_ELBC
278 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
279 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
280 #endif
281
282 /* Serial Port - controlled on board with jumper J8
283 * open - index 2
284 * shorted - index 1
285 */
286 #define CONFIG_CONS_INDEX 1
287 #undef CONFIG_SERIAL_SOFTWARE_FIFO
288 #define CONFIG_SYS_NS16550_SERIAL
289 #define CONFIG_SYS_NS16550_REG_SIZE 1
290 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
291 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
292 #define CONFIG_NS16550_MIN_FUNCTIONS
293 #endif
294
295 #define CONFIG_SYS_BAUDRATE_TABLE \
296 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
297
298 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
299 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
300
301 /* I2C */
302 #define CONFIG_SYS_I2C
303 #define CONFIG_SYS_I2C_FSL
304 #define CONFIG_SYS_FSL_I2C_SPEED 400000
305 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
306 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
307 #define CONFIG_SYS_FSL_I2C2_SPEED 400000
308 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
309 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
310 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} }
311 #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */
312
313 #define CONFIG_RTC_DS1337
314 #define CONFIG_RTC_DS1337_NOOSC
315 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
316 #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18
317 #define CONFIG_SYS_I2C_NCT72_ADDR 0x4C
318 #define CONFIG_SYS_I2C_IDT6V49205B 0x69
319
320 /*
321 * eSPI - Enhanced SPI
322 */
323 #define CONFIG_HARD_SPI
324
325 #define CONFIG_SF_DEFAULT_SPEED 10000000
326 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
327
328 #if defined(CONFIG_PCI)
329 /*
330 * General PCI
331 * Memory space is mapped 1-1, but I/O space must start from 0.
332 */
333
334 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
335 #define CONFIG_SYS_PCIE2_NAME "PCIe SLOT CON9"
336 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
337 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
338 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
339 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
340 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
341 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
342 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
343 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
344
345 /* controller 1, Slot 2, tgtid 1, Base address a000 */
346 #define CONFIG_SYS_PCIE1_NAME "PCIe SLOT CON10"
347 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
348 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
349 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
350 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
351 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
352 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
353 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000
354 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
355
356 #define CONFIG_CMD_PCI
357
358 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
359 #endif /* CONFIG_PCI */
360
361 /*
362 * Environment
363 */
364 #ifdef CONFIG_ENV_FIT_UCBOOT
365
366 #define CONFIG_ENV_IS_IN_FLASH
367 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x20000)
368 #define CONFIG_ENV_SIZE 0x20000
369 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
370
371 #else
372
373 #define CONFIG_ENV_SPI_BUS 0
374 #define CONFIG_ENV_SPI_CS 0
375 #define CONFIG_ENV_SPI_MAX_HZ 10000000
376 #define CONFIG_ENV_SPI_MODE 0
377
378 #ifdef CONFIG_RAMBOOT_SPIFLASH
379
380 #define CONFIG_ENV_IS_IN_SPI_FLASH
381 #define CONFIG_ENV_SIZE 0x3000 /* 12KB */
382 #define CONFIG_ENV_OFFSET 0x2000 /* 8KB */
383 #define CONFIG_ENV_SECT_SIZE 0x1000
384
385 #if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT)
386 /* Address and size of Redundant Environment Sector */
387 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
388 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
389 #endif
390
391 #elif defined(CONFIG_RAMBOOT_SDCARD)
392 #define CONFIG_ENV_IS_IN_MMC
393 #define CONFIG_FSL_FIXED_MMC_LOCATION
394 #define CONFIG_ENV_SIZE 0x2000
395 #define CONFIG_SYS_MMC_ENV_DEV 0
396
397 #elif defined(CONFIG_SYS_RAMBOOT)
398 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
399 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
400 #define CONFIG_ENV_SIZE 0x2000
401
402 #else
403 #define CONFIG_ENV_IS_IN_FLASH
404 #define CONFIG_ENV_BASE (CONFIG_SYS_FLASH_BASE)
405 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
406 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
407 #define CONFIG_ENV_ADDR (CONFIG_ENV_BASE + 0xC0000)
408 #if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT)
409 /* Address and size of Redundant Environment Sector */
410 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
411 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
412 #endif
413
414 #endif
415
416 #endif /* CONFIG_ENV_FIT_UCBOOT */
417
418 #define CONFIG_LOADS_ECHO /* echo on for serial download */
419 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
420
421 /*
422 * Command line configuration.
423 */
424 #define CONFIG_CMD_REGINFO
425
426 /*
427 * USB
428 */
429 #define CONFIG_HAS_FSL_DR_USB
430
431 #if defined(CONFIG_HAS_FSL_DR_USB)
432 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
433
434 #ifdef CONFIG_USB_EHCI_HCD
435 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
436 #define CONFIG_USB_EHCI_FSL
437 #endif
438 #endif
439
440 #undef CONFIG_WATCHDOG /* watchdog disabled */
441
442 #ifdef CONFIG_MMC
443 #define CONFIG_FSL_ESDHC
444 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
445 #define CONFIG_MMC_SPI
446 #define CONFIG_CMD_MMC_SPI
447 #endif
448
449 /* Misc Extra Settings */
450 #undef CONFIG_WATCHDOG /* watchdog disabled */
451
452 /*
453 * Miscellaneous configurable options
454 */
455 #define CONFIG_SYS_LONGHELP /* undef to save memory */
456 #define CONFIG_CMDLINE_EDITING /* Command-line editing */
457 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
458 #if defined(CONFIG_CMD_KGDB)
459 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
460 #else
461 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
462 #endif
463 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
464 /* Print Buffer Size */
465 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
466 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
467 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */
468
469 /*
470 * For booting Linux, the board info and command line data
471 * have to be in the first 64 MB of memory, since this is
472 * the maximum mapped by the Linux kernel during initialization.
473 */
474 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/
475 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
476
477 #if defined(CONFIG_CMD_KGDB)
478 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
479 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
480 #endif
481
482 /*
483 * Environment Configuration
484 */
485
486 #if defined(CONFIG_TSEC_ENET)
487
488 #if defined(CONFIG_UCP1020_REV_1_2)
489 #define CONFIG_PHY_MICREL_KSZ9021
490 #elif defined(CONFIG_UCP1020_REV_1_3)
491 #define CONFIG_PHY_MICREL_KSZ9031
492 #else
493 #error "UCP1020 module revision is not defined !!!"
494 #endif
495
496 #define CONFIG_BOOTP_SERVERIP
497
498 #define CONFIG_MII /* MII PHY management */
499 #define CONFIG_TSEC1_NAME "eTSEC1"
500 #define CONFIG_TSEC2_NAME "eTSEC2"
501 #define CONFIG_TSEC3_NAME "eTSEC3"
502
503 #define TSEC1_PHY_ADDR 4
504 #define TSEC2_PHY_ADDR 0
505 #define TSEC2_PHY_ADDR_SGMII 0x00
506 #define TSEC3_PHY_ADDR 6
507
508 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
509 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
510 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
511
512 #define TSEC1_PHYIDX 0
513 #define TSEC2_PHYIDX 0
514 #define TSEC3_PHYIDX 0
515
516 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
517
518 #endif
519
520 #define CONFIG_HOSTNAME UCP1020
521 #define CONFIG_ROOTPATH "/opt/nfsroot"
522 #define CONFIG_BOOTFILE "uImage"
523 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
524
525 /* default location for tftp and bootm */
526 #define CONFIG_LOADADDR 1000000
527
528 #define CONFIG_BOOTARGS /* the boot command will set bootargs */
529
530 #if defined(CONFIG_DONGLE)
531
532 #define CONFIG_EXTRA_ENV_SETTINGS \
533 "bootcmd=run prog_spi_mbrbootcramfs\0" \
534 "bootfile=uImage\0" \
535 "consoledev=ttyS0\0" \
536 "cramfsfile=image.cramfs\0" \
537 "dtbaddr=0x00c00000\0" \
538 "dtbfile=image.dtb\0" \
539 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
540 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
541 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
542 "fileaddr=0x01000000\0" \
543 "filesize=0x00080000\0" \
544 "flashmbr=sf probe 0; " \
545 "tftp $loadaddr $mbr; " \
546 "sf erase $mbr_offset +$filesize; " \
547 "sf write $loadaddr $mbr_offset $filesize\0" \
548 "flashrecovery=tftp $recoveryaddr $cramfsfile; " \
549 "protect off $nor_recoveryaddr +$filesize; " \
550 "erase $nor_recoveryaddr +$filesize; " \
551 "cp.b $recoveryaddr $nor_recoveryaddr $filesize; " \
552 "protect on $nor_recoveryaddr +$filesize\0 " \
553 "flashuboot=tftp $ubootaddr $ubootfile; " \
554 "protect off $nor_ubootaddr +$filesize; " \
555 "erase $nor_ubootaddr +$filesize; " \
556 "cp.b $ubootaddr $nor_ubootaddr $filesize; " \
557 "protect on $nor_ubootaddr +$filesize\0 " \
558 "flashworking=tftp $workingaddr $cramfsfile; " \
559 "protect off $nor_workingaddr +$filesize; " \
560 "erase $nor_workingaddr +$filesize; " \
561 "cp.b $workingaddr $nor_workingaddr $filesize; " \
562 "protect on $nor_workingaddr +$filesize\0 " \
563 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
564 "kerneladdr=0x01100000\0" \
565 "kernelfile=uImage\0" \
566 "loadaddr=0x01000000\0" \
567 "mbr=uCP1020d.mbr\0" \
568 "mbr_offset=0x00000000\0" \
569 "mmbr=uCP1020Quiet.mbr\0" \
570 "mmcpart=0:2\0" \
571 "mmc__mbrd=fatload mmc $mmcpart $loadaddr $mbr; " \
572 "mmc erase 1 1; " \
573 "mmc write $loadaddr 1 1\0" \
574 "mmc__uboot=fatload mmc $mmcpart $loadaddr $ubootfile; " \
575 "mmc erase 0x40 0x400; " \
576 "mmc write $loadaddr 0x40 0x400\0" \
577 "netdev=eth0\0" \
578 "nor_recoveryaddr=0xEC0A0000\0" \
579 "nor_ubootaddr=0xEFF80000\0" \
580 "nor_workingaddr=0xECFA0000\0" \
581 "norbootrecovery=setenv bootargs $recoverybootargs" \
582 " console=$consoledev,$baudrate $othbootargs; " \
583 "run norloadrecovery; " \
584 "bootm $kerneladdr - $dtbaddr\0" \
585 "norbootworking=setenv bootargs $workingbootargs" \
586 " console=$consoledev,$baudrate $othbootargs; " \
587 "run norloadworking; " \
588 "bootm $kerneladdr - $dtbaddr\0" \
589 "norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; " \
590 "setenv cramfsaddr $nor_recoveryaddr; " \
591 "cramfsload $dtbaddr $dtbfile; " \
592 "cramfsload $kerneladdr $kernelfile\0" \
593 "norloadworking=mw.l $kerneladdr 0x0 0x00a00000; " \
594 "setenv cramfsaddr $nor_workingaddr; " \
595 "cramfsload $dtbaddr $dtbfile; " \
596 "cramfsload $kerneladdr $kernelfile\0" \
597 "prog_spi_mbr=run spi__mbr\0" \
598 "prog_spi_mbrboot=run spi__mbr; run spi__boot1; run spi__boot2\0" \
599 "prog_spi_mbrbootcramfs=run spi__mbr; run spi__boot1; run spi__boot2; " \
600 "run spi__cramfs\0" \
601 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
602 " console=$consoledev,$baudrate $othbootargs; " \
603 "tftp $rootfsaddr $rootfsfile; " \
604 "tftp $loadaddr $kernelfile; " \
605 "tftp $dtbaddr $dtbfile; " \
606 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
607 "ramdisk_size=120000\0" \
608 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
609 "recoveryaddr=0x02F00000\0" \
610 "recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0" \
611 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
612 "mw.l 0xffe0f008 0x00400000\0" \
613 "rootfsaddr=0x02F00000\0" \
614 "rootfsfile=rootfs.ext2.gz.uboot\0" \
615 "rootpath=/opt/nfsroot\0" \
616 "spi__boot1=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
617 "protect off 0xeC000000 +$filesize; " \
618 "erase 0xEC000000 +$filesize; " \
619 "cp.b $loadaddr 0xEC000000 $filesize; " \
620 "cmp.b $loadaddr 0xEC000000 $filesize; " \
621 "protect on 0xeC000000 +$filesize\0" \
622 "spi__boot2=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
623 "protect off 0xeFF80000 +$filesize; " \
624 "erase 0xEFF80000 +$filesize; " \
625 "cp.b $loadaddr 0xEFF80000 $filesize; " \
626 "cmp.b $loadaddr 0xEFF80000 $filesize; " \
627 "protect on 0xeFF80000 +$filesize\0" \
628 "spi__bootd=fatload mmc $mmcpart $loadaddr $ubootd; " \
629 "sf probe 0; sf erase 0x8000 +$filesize; " \
630 "sf write $loadaddr 0x8000 $filesize\0" \
631 "spi__cramfs=fatload mmc $mmcpart $loadaddr image.cramfs; " \
632 "protect off 0xec0a0000 +$filesize; " \
633 "erase 0xeC0A0000 +$filesize; " \
634 "cp.b $loadaddr 0xeC0A0000 $filesize; " \
635 "protect on 0xec0a0000 +$filesize\0" \
636 "spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; " \
637 "sf probe 1; sf erase 0 +$filesize; " \
638 "sf write $loadaddr 0 $filesize\0" \
639 "spi__mbrd=fatload mmc $mmcpart $loadaddr $mbr; " \
640 "sf probe 0; sf erase 0 +$filesize; " \
641 "sf write $loadaddr 0 $filesize\0" \
642 "tftpflash=tftpboot $loadaddr $uboot; " \
643 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
644 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
645 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
646 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
647 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
648 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
649 "ubootaddr=0x01000000\0" \
650 "ubootfile=u-boot.bin\0" \
651 "ubootd=u-boot4dongle.bin\0" \
652 "upgrade=run flashworking\0" \
653 "usb_phy_type=ulpi\0 " \
654 "workingaddr=0x02F00000\0" \
655 "workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
656
657 #else
658
659 #if defined(CONFIG_UCP1020T1)
660
661 #define CONFIG_EXTRA_ENV_SETTINGS \
662 "bootcmd=run releasefpga; run norbootworking || run norbootrecovery\0" \
663 "bootfile=uImage\0" \
664 "consoledev=ttyS0\0" \
665 "cramfsfile=image.cramfs\0" \
666 "dtbaddr=0x00c00000\0" \
667 "dtbfile=image.dtb\0" \
668 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
669 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
670 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
671 "fileaddr=0x01000000\0" \
672 "filesize=0x00080000\0" \
673 "flashmbr=sf probe 0; " \
674 "tftp $loadaddr $mbr; " \
675 "sf erase $mbr_offset +$filesize; " \
676 "sf write $loadaddr $mbr_offset $filesize\0" \
677 "flashrecovery=tftp $recoveryaddr $cramfsfile; " \
678 "protect off $nor_recoveryaddr +$filesize; " \
679 "erase $nor_recoveryaddr +$filesize; " \
680 "cp.b $recoveryaddr $nor_recoveryaddr $filesize; " \
681 "protect on $nor_recoveryaddr +$filesize\0 " \
682 "flashuboot=tftp $ubootaddr $ubootfile; " \
683 "protect off $nor_ubootaddr +$filesize; " \
684 "erase $nor_ubootaddr +$filesize; " \
685 "cp.b $ubootaddr $nor_ubootaddr $filesize; " \
686 "protect on $nor_ubootaddr +$filesize\0 " \
687 "flashworking=tftp $workingaddr $cramfsfile; " \
688 "protect off $nor_workingaddr +$filesize; " \
689 "erase $nor_workingaddr +$filesize; " \
690 "cp.b $workingaddr $nor_workingaddr $filesize; " \
691 "protect on $nor_workingaddr +$filesize\0 " \
692 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
693 "kerneladdr=0x01100000\0" \
694 "kernelfile=uImage\0" \
695 "loadaddr=0x01000000\0" \
696 "mbr=uCP1020.mbr\0" \
697 "mbr_offset=0x00000000\0" \
698 "netdev=eth0\0" \
699 "nor_recoveryaddr=0xEC0A0000\0" \
700 "nor_ubootaddr=0xEFF80000\0" \
701 "nor_workingaddr=0xECFA0000\0" \
702 "norbootrecovery=setenv bootargs $recoverybootargs" \
703 " console=$consoledev,$baudrate $othbootargs; " \
704 "run norloadrecovery; " \
705 "bootm $kerneladdr - $dtbaddr\0" \
706 "norbootworking=setenv bootargs $workingbootargs" \
707 " console=$consoledev,$baudrate $othbootargs; " \
708 "run norloadworking; " \
709 "bootm $kerneladdr - $dtbaddr\0" \
710 "norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; " \
711 "setenv cramfsaddr $nor_recoveryaddr; " \
712 "cramfsload $dtbaddr $dtbfile; " \
713 "cramfsload $kerneladdr $kernelfile\0" \
714 "norloadworking=mw.l $kerneladdr 0x0 0x00a00000; " \
715 "setenv cramfsaddr $nor_workingaddr; " \
716 "cramfsload $dtbaddr $dtbfile; " \
717 "cramfsload $kerneladdr $kernelfile\0" \
718 "othbootargs=quiet\0" \
719 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
720 " console=$consoledev,$baudrate $othbootargs; " \
721 "tftp $rootfsaddr $rootfsfile; " \
722 "tftp $loadaddr $kernelfile; " \
723 "tftp $dtbaddr $dtbfile; " \
724 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
725 "ramdisk_size=120000\0" \
726 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
727 "recoveryaddr=0x02F00000\0" \
728 "recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0" \
729 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
730 "mw.l 0xffe0f008 0x00400000\0" \
731 "rootfsaddr=0x02F00000\0" \
732 "rootfsfile=rootfs.ext2.gz.uboot\0" \
733 "rootpath=/opt/nfsroot\0" \
734 "silent=1\0" \
735 "tftpflash=tftpboot $loadaddr $uboot; " \
736 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
737 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
738 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
739 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
740 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
741 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
742 "ubootaddr=0x01000000\0" \
743 "ubootfile=u-boot.bin\0" \
744 "upgrade=run flashworking\0" \
745 "workingaddr=0x02F00000\0" \
746 "workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
747
748 #else /* For Arcturus Modules */
749
750 #define CONFIG_EXTRA_ENV_SETTINGS \
751 "bootcmd=run norkernel\0" \
752 "bootfile=uImage\0" \
753 "consoledev=ttyS0\0" \
754 "dtbaddr=0x00c00000\0" \
755 "dtbfile=image.dtb\0" \
756 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
757 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
758 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
759 "fileaddr=0x01000000\0" \
760 "filesize=0x00080000\0" \
761 "flashmbr=sf probe 0; " \
762 "tftp $loadaddr $mbr; " \
763 "sf erase $mbr_offset +$filesize; " \
764 "sf write $loadaddr $mbr_offset $filesize\0" \
765 "flashuboot=tftp $loadaddr $ubootfile; " \
766 "protect off $nor_ubootaddr0 +$filesize; " \
767 "erase $nor_ubootaddr0 +$filesize; " \
768 "cp.b $loadaddr $nor_ubootaddr0 $filesize; " \
769 "protect on $nor_ubootaddr0 +$filesize; " \
770 "protect off $nor_ubootaddr1 +$filesize; " \
771 "erase $nor_ubootaddr1 +$filesize; " \
772 "cp.b $loadaddr $nor_ubootaddr1 $filesize; " \
773 "protect on $nor_ubootaddr1 +$filesize\0 " \
774 "format0=protect off $part0base +$part0size; " \
775 "erase $part0base +$part0size\0" \
776 "format1=protect off $part1base +$part1size; " \
777 "erase $part1base +$part1size\0" \
778 "format2=protect off $part2base +$part2size; " \
779 "erase $part2base +$part2size\0" \
780 "format3=protect off $part3base +$part3size; " \
781 "erase $part3base +$part3size\0" \
782 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
783 "kerneladdr=0x01100000\0" \
784 "kernelargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0" \
785 "kernelfile=uImage\0" \
786 "loadaddr=0x01000000\0" \
787 "mbr=uCP1020.mbr\0" \
788 "mbr_offset=0x00000000\0" \
789 "netdev=eth0\0" \
790 "nor_ubootaddr0=0xEC000000\0" \
791 "nor_ubootaddr1=0xEFF80000\0" \
792 "norkernel=setenv bootargs $kernelargs console=$consoledev,$baudrate; " \
793 "run norkernelload; " \
794 "bootm $kerneladdr - $dtbaddr\0" \
795 "norkernelload=mw.l $kerneladdr 0x0 0x00a00000; " \
796 "setenv cramfsaddr $part0base; " \
797 "cramfsload $dtbaddr $dtbfile; " \
798 "cramfsload $kerneladdr $kernelfile\0" \
799 "part0base=0xEC100000\0" \
800 "part0size=0x00700000\0" \
801 "part1base=0xEC800000\0" \
802 "part1size=0x02000000\0" \
803 "part2base=0xEE800000\0" \
804 "part2size=0x00800000\0" \
805 "part3base=0xEF000000\0" \
806 "part3size=0x00F80000\0" \
807 "partENVbase=0xEC080000\0" \
808 "partENVsize=0x00080000\0" \
809 "program0=tftp part0-000000.bin; " \
810 "protect off $part0base +$filesize; " \
811 "erase $part0base +$filesize; " \
812 "cp.b $loadaddr $part0base $filesize; " \
813 "echo Verifying...; " \
814 "cmp.b $loadaddr $part0base $filesize\0" \
815 "program1=tftp part1-000000.bin; " \
816 "protect off $part1base +$filesize; " \
817 "erase $part1base +$filesize; " \
818 "cp.b $loadaddr $part1base $filesize; " \
819 "echo Verifying...; " \
820 "cmp.b $loadaddr $part1base $filesize\0" \
821 "program2=tftp part2-000000.bin; " \
822 "protect off $part2base +$filesize; " \
823 "erase $part2base +$filesize; " \
824 "cp.b $loadaddr $part2base $filesize; " \
825 "echo Verifying...; " \
826 "cmp.b $loadaddr $part2base $filesize\0" \
827 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
828 " console=$consoledev,$baudrate $othbootargs; " \
829 "tftp $rootfsaddr $rootfsfile; " \
830 "tftp $loadaddr $kernelfile; " \
831 "tftp $dtbaddr $dtbfile; " \
832 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
833 "ramdisk_size=120000\0" \
834 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
835 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
836 "mw.l 0xffe0f008 0x00400000\0" \
837 "rootfsaddr=0x02F00000\0" \
838 "rootfsfile=rootfs.ext2.gz.uboot\0" \
839 "rootpath=/opt/nfsroot\0" \
840 "spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; " \
841 "sf probe 0; sf erase 0 +$filesize; " \
842 "sf write $loadaddr 0 $filesize\0" \
843 "spi__boot=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
844 "protect off 0xeC000000 +$filesize; " \
845 "erase 0xEC000000 +$filesize; " \
846 "cp.b $loadaddr 0xEC000000 $filesize; " \
847 "cmp.b $loadaddr 0xEC000000 $filesize; " \
848 "protect on 0xeC000000 +$filesize\0" \
849 "tftpflash=tftpboot $loadaddr $uboot; " \
850 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
851 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
852 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
853 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
854 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
855 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
856 "ubootfile=u-boot.bin\0" \
857 "upgrade=run flashuboot\0" \
858 "usb_phy_type=ulpi\0 " \
859 "boot_nfs= " \
860 "setenv bootargs root=/dev/nfs rw " \
861 "nfsroot=$serverip:$rootpath " \
862 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
863 "console=$consoledev,$baudrate $othbootargs;" \
864 "tftp $loadaddr $bootfile;" \
865 "tftp $fdtaddr $fdtfile;" \
866 "bootm $loadaddr - $fdtaddr\0" \
867 "boot_hd = " \
868 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \
869 "console=$consoledev,$baudrate $othbootargs;" \
870 "usb start;" \
871 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \
872 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \
873 "bootm $loadaddr - $fdtaddr\0" \
874 "boot_usb_fat = " \
875 "setenv bootargs root=/dev/ram rw " \
876 "console=$consoledev,$baudrate $othbootargs " \
877 "ramdisk_size=$ramdisk_size;" \
878 "usb start;" \
879 "fatload usb 0:2 $loadaddr $bootfile;" \
880 "fatload usb 0:2 $fdtaddr $fdtfile;" \
881 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \
882 "bootm $loadaddr $ramdiskaddr $fdtaddr\0 " \
883 "boot_usb_ext2 = " \
884 "setenv bootargs root=/dev/ram rw " \
885 "console=$consoledev,$baudrate $othbootargs " \
886 "ramdisk_size=$ramdisk_size;" \
887 "usb start;" \
888 "ext2load usb 0:4 $loadaddr $bootfile;" \
889 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
890 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
891 "bootm $loadaddr $ramdiskaddr $fdtaddr\0 " \
892 "boot_nor = " \
893 "setenv bootargs root=/dev/$jffs2nor rw " \
894 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \
895 "bootm $norbootaddr - $norfdtaddr\0 " \
896 "boot_ram = " \
897 "setenv bootargs root=/dev/ram rw " \
898 "console=$consoledev,$baudrate $othbootargs " \
899 "ramdisk_size=$ramdisk_size;" \
900 "tftp $ramdiskaddr $ramdiskfile;" \
901 "tftp $loadaddr $bootfile;" \
902 "tftp $fdtaddr $fdtfile;" \
903 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"
904
905 #endif
906 #endif
907
908 #endif /* __CONFIG_H */
"Das U-Boot" Source Tree