include/configs/am3517_evm.h

   1 /*
   2  * am3517_evm.h - Default configuration for AM3517 EVM board.
   3  *
   4  * Author: Vaibhav Hiremath <hvaibhav@ti.com>
   5  *
   6  * Based on omap3_evm_config.h
   7  *
   8  * Copyright (C) 2010 Texas Instruments Incorporated
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or
  13  * (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23  */
  24
  25 #ifndef __CONFIG_H
  26 #define __CONFIG_H
  27
  28 /*
  29  * High Level Configuration Options
  30  */
  31 #define CONFIG_OMAP             1       /* in a TI OMAP core */
  32 #define CONFIG_OMAP34XX         1       /* which is a 34XX */
  33 #define CONFIG_OMAP3_AM3517EVM  1       /* working with AM3517EVM */
  34
  35 #define CONFIG_EMIF4    /* The chip has EMIF4 controller */
  36
  37 #include <asm/arch/cpu.h>               /* get chip and board defs */
  38 #include <asm/arch/omap3.h>
  39
  40 /*
  41  * Display CPU and Board information
  42  */
  43 #define CONFIG_DISPLAY_CPUINFO          1
  44 #define CONFIG_DISPLAY_BOARDINFO        1
  45
  46 /* Clock Defines */
  47 #define V_OSCK                  26000000        /* Clock output from T2 */
  48 #define V_SCLK                  (V_OSCK >> 1)
  49
  50 #define CONFIG_MISC_INIT_R
  51
  52 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs */
  53 #define CONFIG_SETUP_MEMORY_TAGS        1
  54 #define CONFIG_INITRD_TAG               1
  55 #define CONFIG_REVISION_TAG             1
  56
  57 /*
  58  * Size of malloc() pool
  59  */
  60 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB sector */
  61 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (128 << 10))
  62 /*
  63  * DDR related
  64  */
  65 #define CONFIG_SYS_CS0_SIZE             (256 * 1024 * 1024)
  66
  67 /*
  68  * Hardware drivers
  69  */
  70
  71 /*
  72  * NS16550 Configuration
  73  */
  74 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  75
  76 #define CONFIG_SYS_NS16550
  77 #define CONFIG_SYS_NS16550_SERIAL
  78 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  79 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  80
  81 /*
  82  * select serial console configuration
  83  */
  84 #define CONFIG_CONS_INDEX               3
  85 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  86 #define CONFIG_SERIAL3                  3       /* UART3 on AM3517 EVM */
  87
  88 /* allow to overwrite serial and ethaddr */
  89 #define CONFIG_ENV_OVERWRITE
  90 #define CONFIG_BAUDRATE                 115200
  91 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  92                                         115200}
  93 #define CONFIG_MMC                      1
  94 #define CONFIG_GENERIC_MMC              1
  95 #define CONFIG_OMAP_HSMMC               1
  96 #define CONFIG_DOS_PARTITION            1
  97
  98 /*
  99  * USB configuration
 100  * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
 101  * Enable CONFIG_MUSB_UDC for Device functionalities.
 102  */
 103 #define CONFIG_USB_AM35X                1
 104 #define CONFIG_MUSB_HCD                 1
 105
 106 #ifdef CONFIG_USB_AM35X
 107
 108 #ifdef CONFIG_MUSB_HCD
 109 #define CONFIG_CMD_USB
 110
 111 #define CONFIG_USB_STORAGE
 112 #define CONGIG_CMD_STORAGE
 113 #define CONFIG_CMD_FAT
 114
 115 #ifdef CONFIG_USB_KEYBOARD
 116 #define CONFIG_SYS_USB_EVENT_POLL
 117 #define CONFIG_PREBOOT "usb start"
 118 #endif /* CONFIG_USB_KEYBOARD */
 119
 120 #endif /* CONFIG_MUSB_HCD */
 121
 122 #ifdef CONFIG_MUSB_UDC
 123 /* USB device configuration */
 124 #define CONFIG_USB_DEVICE               1
 125 #define CONFIG_USB_TTY                  1
 126 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
 127 /* Change these to suit your needs */
 128 #define CONFIG_USBD_VENDORID            0x0451
 129 #define CONFIG_USBD_PRODUCTID           0x5678
 130 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
 131 #define CONFIG_USBD_PRODUCT_NAME        "AM3517EVM"
 132 #endif /* CONFIG_MUSB_UDC */
 133
 134 #endif /* CONFIG_USB_AM35X */
 135
 136 /* commands to include */
 137 #include <config_cmd_default.h>
 138
 139 #define CONFIG_CMD_EXT2         /* EXT2 Support                 */
 140 #define CONFIG_CMD_FAT          /* FAT support                  */
 141 #define CONFIG_CMD_JFFS2        /* JFFS2 Support                */
 142
 143 #define CONFIG_CMD_I2C          /* I2C serial bus support       */
 144 #define CONFIG_CMD_MMC          /* MMC support                  */
 145 #define CONFIG_CMD_NAND         /* NAND support                 */
 146 #define CONFIG_CMD_DHCP
 147 #undef CONFIG_CMD_PING
 148
 149 #undef CONFIG_CMD_FLASH         /* flinfo, erase, protect       */
 150 #undef CONFIG_CMD_FPGA          /* FPGA configuration Support   */
 151 #undef CONFIG_CMD_IMI           /* iminfo                       */
 152 #undef CONFIG_CMD_IMLS          /* List all found images        */
 153
 154 #define CONFIG_SYS_NO_FLASH
 155 #define CONFIG_HARD_I2C                 1
 156 #define CONFIG_SYS_I2C_SPEED            100000
 157 #define CONFIG_SYS_I2C_SLAVE            1
 158 #define CONFIG_SYS_I2C_BUS              0
 159 #define CONFIG_SYS_I2C_BUS_SELECT       1
 160 #define CONFIG_DRIVER_OMAP34XX_I2C      1
 161
 162 #undef CONFIG_CMD_NET
 163 #undef CONFIG_CMD_NFS
 164 /*
 165  * Board NAND Info.
 166  */
 167 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 168                                                         /* to access nand */
 169 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 170                                                         /* to access */
 171                                                         /* nand at CS0 */
 172
 173 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of */
 174                                                         /* NAND devices */
 175 #define CONFIG_JFFS2_NAND
 176 /* nand device jffs2 lives on */
 177 #define CONFIG_JFFS2_DEV                "nand0"
 178 /* start of jffs2 partition */
 179 #define CONFIG_JFFS2_PART_OFFSET        0x680000
 180 #define CONFIG_JFFS2_PART_SIZE          0xf980000       /* sz of jffs2 part */
 181
 182 /* Environment information */
 183 #define CONFIG_BOOTDELAY        10
 184
 185 #define CONFIG_BOOTFILE         "uImage"
 186
 187 #define CONFIG_EXTRA_ENV_SETTINGS \
 188         "loadaddr=0x82000000\0" \
 189         "console=ttyO2,115200n8\0" \
 190         "mmcdev=0\0" \
 191         "mmcargs=setenv bootargs console=${console} " \
 192                 "root=/dev/mmcblk0p2 rw rootwait\0" \
 193         "nandargs=setenv bootargs console=${console} " \
 194                 "root=/dev/mtdblock4 rw " \
 195                 "rootfstype=jffs2\0" \
 196         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 197         "bootscript=echo Running bootscript from mmc ...; " \
 198                 "source ${loadaddr}\0" \
 199         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 200         "mmcboot=echo Booting from mmc ...; " \
 201                 "run mmcargs; " \
 202                 "bootm ${loadaddr}\0" \
 203         "nandboot=echo Booting from nand ...; " \
 204                 "run nandargs; " \
 205                 "nand read ${loadaddr} 280000 400000; " \
 206                 "bootm ${loadaddr}\0" \
 207
 208 #define CONFIG_BOOTCOMMAND \
 209         "mmc dev ${mmcdev}; if mmc rescan; then " \
 210                 "if run loadbootscript; then " \
 211                         "run bootscript; " \
 212                 "else " \
 213                         "if run loaduimage; then " \
 214                                 "run mmcboot; " \
 215                         "else run nandboot; " \
 216                         "fi; " \
 217                 "fi; " \
 218         "else run nandboot; fi"
 219
 220 #define CONFIG_AUTO_COMPLETE    1
 221 /*
 222  * Miscellaneous configurable options
 223  */
 224 #define V_PROMPT                        "AM3517_EVM # "
 225
 226 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 227 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 228 #define CONFIG_SYS_PROMPT               V_PROMPT
 229 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 230 /* Print Buffer Size */
 231 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 232                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 233 #define CONFIG_SYS_MAXARGS              32      /* max number of command */
 234                                                 /* args */
 235 /* Boot Argument Buffer Size */
 236 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 237 /* memtest works on */
 238 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 239 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 240                                         0x01F00000) /* 31MB */
 241
 242 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0) /* default load */
 243                                                                 /* address */
 244
 245 /*
 246  * AM3517 has 12 GP timers, they can be driven by the system clock
 247  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 248  * This rate is divided by a local divisor.
 249  */
 250 #define CONFIG_SYS_TIMERBASE            OMAP34XX_GPT2
 251 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 252 #define CONFIG_SYS_HZ                   1000
 253
 254 /*-----------------------------------------------------------------------
 255  * Physical Memory Map
 256  */
 257 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
 258 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 259 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
 260
 261 /*-----------------------------------------------------------------------
 262  * FLASH and environment organization
 263  */
 264
 265 /* **** PISMO SUPPORT *** */
 266
 267 /* Configure the PISMO */
 268 #define PISMO1_NAND_SIZE                GPMC_SIZE_128M
 269 #define PISMO1_ONEN_SIZE                GPMC_SIZE_128M
 270
 271 #define CONFIG_SYS_MAX_FLASH_SECT       520     /* max number of sectors */
 272                                                 /* on one chip */
 273 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of flash banks */
 274 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 275
 276 #if defined(CONFIG_CMD_NAND)
 277 #define CONFIG_SYS_FLASH_BASE           PISMO1_NAND_BASE
 278 #endif
 279
 280 /* Monitor at start of flash */
 281 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 282
 283 #define CONFIG_NAND_OMAP_GPMC
 284 #define GPMC_NAND_ECC_LP_x16_LAYOUT     1
 285 #define CONFIG_ENV_IS_IN_NAND           1
 286 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 287
 288 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 289 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 290 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 291
 292 /*-----------------------------------------------------------------------
 293  * CFI FLASH driver setup
 294  */
 295 /* timeout values are in ticks */
 296 #define CONFIG_SYS_FLASH_ERASE_TOUT     (100 * CONFIG_SYS_HZ)
 297 #define CONFIG_SYS_FLASH_WRITE_TOUT     (100 * CONFIG_SYS_HZ)
 298
 299 /* Flash banks JFFS2 should use */
 300 #define CONFIG_SYS_MAX_MTD_BANKS        (CONFIG_SYS_MAX_FLASH_BANKS + \
 301                                         CONFIG_SYS_MAX_NAND_DEVICE)
 302 #define CONFIG_SYS_JFFS2_MEM_NAND
 303 /* use flash_info[2] */
 304 #define CONFIG_SYS_JFFS2_FIRST_BANK     CONFIG_SYS_MAX_FLASH_BANKS
 305 #define CONFIG_SYS_JFFS2_NUM_BANKS      1
 306
 307 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 308 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 309 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 310 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 311                                          CONFIG_SYS_INIT_RAM_SIZE - \
 312                                          GENERATED_GBL_DATA_SIZE)
 313
 314 /* Defines for SPL */
 315 #define CONFIG_SPL
 316 #define CONFIG_SPL_FRAMEWORK
 317 #define CONFIG_SPL_BOARD_INIT
 318 #define CONFIG_SPL_NAND_SIMPLE
 319 #define CONFIG_SPL_TEXT_BASE            0x40200800
 320 #define CONFIG_SPL_MAX_SIZE             (54 * 1024)     /* 8 KB for stack */
 321 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 322
 323 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
 324 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 325
 326 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 327 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
 328 #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
 329 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
 330
 331 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 332 #define CONFIG_SPL_LIBDISK_SUPPORT
 333 #define CONFIG_SPL_I2C_SUPPORT
 334 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 335 #define CONFIG_SPL_MMC_SUPPORT
 336 #define CONFIG_SPL_FAT_SUPPORT
 337 #define CONFIG_SPL_SERIAL_SUPPORT
 338 #define CONFIG_SPL_NAND_SUPPORT
 339 #define CONFIG_SPL_NAND_BASE
 340 #define CONFIG_SPL_NAND_DRIVERS
 341 #define CONFIG_SPL_NAND_ECC
 342 #define CONFIG_SPL_POWER_SUPPORT
 343 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/omap-common/u-boot-spl.lds"
 344
 345 /* NAND boot config */
 346 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 347 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 348 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 349 #define CONFIG_SYS_NAND_OOBSIZE         64
 350 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 351 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 352 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
 353                                                 10, 11, 12, 13}
 354 #define CONFIG_SYS_NAND_ECCSIZE         512
 355 #define CONFIG_SYS_NAND_ECCBYTES        3
 356 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 357 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 358
 359 /*
 360  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
 361  * 64 bytes before this address should be set aside for u-boot.img's
 362  * header. That is 0x800FFFC0--0x80100000 should not be used for any
 363  * other needs.
 364  */
 365 #define CONFIG_SYS_TEXT_BASE            0x80100000
 366 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 367 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 368
 369 #endif /* __CONFIG_H */