include/configs/apalis_imx6.h

   1 /*
   2  * Copyright 2013-2015 Toradex, Inc.
   3  *
   4  * Configuration settings for the Toradex Apalis iMX6
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #undef CONFIG_DISPLAY_BOARDINFO
  15
  16 #define CONFIG_MACH_TYPE                4886
  17
  18 #define CONFIG_SYS_GENERIC_BOARD
  19
  20 #include <asm/arch/imx-regs.h>
  21 #include <asm/mach-imx/gpio.h>
  22
  23 #ifdef CONFIG_SPL
  24 #include "imx6_spl.h"
  25 #endif
  26
  27 #define CONFIG_CMDLINE_TAG
  28 #define CONFIG_SETUP_MEMORY_TAGS
  29 #define CONFIG_INITRD_TAG
  30 #define CONFIG_REVISION_TAG
  31 #define CONFIG_SERIAL_TAG
  32
  33 /* Size of malloc() pool */
  34 #define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
  35
  36 #define CONFIG_MISC_INIT_R
  37
  38 #define CONFIG_MXC_UART
  39 #define CONFIG_MXC_UART_BASE            UART1_BASE
  40
  41 /* Make the HW version stuff available in U-Boot env */
  42 #define CONFIG_VERSION_VARIABLE         /* ver environment variable */
  43 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  44
  45 /* I2C Configs */
  46 #define CONFIG_SYS_I2C
  47 #define CONFIG_SYS_I2C_MXC
  48 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  49 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  50 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  51 #define CONFIG_SYS_I2C_SPEED            100000
  52
  53 /* OCOTP Configs */
  54 #ifdef CONFIG_CMD_FUSE
  55 #define CONFIG_MXC_OCOTP
  56 #endif
  57
  58 /* MMC Configs */
  59 #define CONFIG_FSL_USDHC
  60 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  61 #define CONFIG_SYS_FSL_USDHC_NUM        3
  62
  63 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  64 #define CONFIG_BOUNCE_BUFFER
  65
  66 /*
  67  * SATA Configs
  68  */
  69 #ifdef CONFIG_CMD_SATA
  70 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  71 #define CONFIG_DWC_AHSATA_PORT_ID       0
  72 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  73 #define CONFIG_LBA48
  74 #endif
  75
  76 /* Network */
  77 #define CONFIG_FEC_MXC
  78 #define CONFIG_MII
  79 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  80 #define CONFIG_FEC_XCV_TYPE             RGMII
  81 #define CONFIG_ETHPRIME                 "FEC"
  82 #define CONFIG_FEC_MXC_PHYADDR          6
  83 #define CONFIG_IP_DEFRAG
  84 #define CONFIG_TFTP_BLOCKSIZE           4096
  85 #define CONFIG_TFTP_TSIZE
  86
  87 /* USB Configs */
  88 /* Host */
  89 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
  90 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
  91 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  92 #define CONFIG_MXC_USB_FLAGS            0
  93 /* Client */
  94 #define CONFIG_USBD_HS
  95
  96 #define CONFIG_USB_GADGET_MASS_STORAGE
  97 /* USB DFU */
  98 #define CONFIG_DFU_MMC
  99
 100 /* Miscellaneous commands */
 101
 102 /* Framebuffer and LCD */
 103 #define CONFIG_VIDEO_IPUV3
 104 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 105 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 106 #define CONFIG_VIDEO_BMP_RLE8
 107 #define CONFIG_SPLASH_SCREEN
 108 #define CONFIG_SPLASH_SCREEN_ALIGN
 109 #define CONFIG_BMP_16BPP
 110 #define CONFIG_VIDEO_LOGO
 111 #define CONFIG_VIDEO_BMP_LOGO
 112 #define CONFIG_CONSOLE_MUX
 113 #define CONFIG_IMX_HDMI
 114 #define CONFIG_IMX_VIDEO_SKIP
 115
 116 /* allow to overwrite serial and ethaddr */
 117 #define CONFIG_ENV_OVERWRITE
 118
 119 /* Command definition */
 120 #undef CONFIG_CMD_LOADB
 121 #undef CONFIG_CMD_LOADS
 122 #undef CONFIG_CMD_NFS
 123 #undef CONFIG_CMD_FLASH
 124
 125 #undef CONFIG_IPADDR
 126 #define CONFIG_IPADDR                   192.168.10.2
 127 #define CONFIG_NETMASK                  255.255.255.0
 128 #undef CONFIG_SERVERIP
 129 #define CONFIG_SERVERIP                 192.168.10.1
 130
 131 #define CONFIG_LOADADDR                 0x12000000
 132
 133 #ifdef CONFIG_CMD_SATA
 134 #define CONFIG_DRIVE_SATA "sata "
 135 #else
 136 #define CONFIG_DRIVE_SATA
 137 #endif
 138
 139 #ifdef CONFIG_CMD_MMC
 140 #define CONFIG_DRIVE_MMC "mmc "
 141 #else
 142 #define CONFIG_DRIVE_MMC
 143 #endif
 144
 145 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 146
 147 #define DFU_ALT_EMMC_INFO \
 148         "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
 149         "boot part 0 1;" \
 150         "rootfs part 0 2;" \
 151         "uImage fat 0 1;" \
 152         "imx6q-colibri-eval-v3.dtb fat 0 1;" \
 153         "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
 154
 155 #define EMMC_BOOTCMD \
 156         "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
 157                 "rootwait\0" \
 158         "emmcboot=run setup; " \
 159                 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 160                 "${vidargs}; echo Booting from internal eMMC chip...; " \
 161                 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
 162                 "${boot_file} && run fdt_fixup && " \
 163                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 164         "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
 165                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 166
 167 #define MEM_LAYOUT_ENV_SETTINGS \
 168         "bootm_size=0x20000000\0" \
 169         "fdt_addr_r=0x12000000\0" \
 170         "fdt_high=0xffffffff\0" \
 171         "initrd_high=0xffffffff\0" \
 172         "kernel_addr_r=0x11000000\0" \
 173         "ramdisk_addr_r=0x12100000\0"
 174
 175 #define NFS_BOOTCMD \
 176         "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 177         "nfsboot=run setup; " \
 178                 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
 179                 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 180                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
 181                 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
 182         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
 183                 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 184
 185 #define SD_BOOTCMD                                              \
 186         "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
 187                 "rootwait\0" \
 188         "sdboot=run setup; " \
 189                 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 190                 "${vidargs}; echo Booting from SD card; " \
 191                 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
 192                 "${boot_file} && run fdt_fixup && " \
 193                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 194         "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
 195                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 196
 197 #define USB_BOOTCMD \
 198         "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
 199                 "rootwait\0" \
 200         "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
 201                 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 202                 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
 203                 "${boot_file} && run fdt_fixup && " \
 204                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 205         "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
 206                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 207
 208 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
 209 #define FDT_FILE "imx6q-apalis-eval.dtb"
 210 #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
 211 #else
 212 #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
 213 #endif
 214 #define CONFIG_EXTRA_ENV_SETTINGS \
 215         "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
 216                 "run nfsboot ; echo ; echo nfsboot failed ; " \
 217                 "usb start ;" \
 218                 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 219         "boot_file=uImage\0" \
 220         "console=ttymxc0\0" \
 221         "defargs=enable_wait_mode=off vmalloc=400M\0" \
 222         "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 223         EMMC_BOOTCMD \
 224         "fdt_file=" FDT_FILE "\0" \
 225         "fdt_fixup=;\0" \
 226         MEM_LAYOUT_ENV_SETTINGS \
 227         NFS_BOOTCMD \
 228         SD_BOOTCMD \
 229         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 230                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 231                 "flash_eth.img && source ${loadaddr}\0" \
 232         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 233                 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 234                 "source ${loadaddr}\0" \
 235         "setup=setenv setupargs fec_mac=${ethaddr} " \
 236                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
 237                 "console=${console},${baudrate}n8\0 " \
 238         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 239         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 240                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 241                 "source ${loadaddr}\0" \
 242         "splashpos=m,m\0" \
 243         "vidargs=mxc_hdmi.only_cea=1 " \
 244                 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
 245                 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
 246                 "fbmem=32M\0 "
 247
 248 /* Miscellaneous configurable options */
 249 #undef CONFIG_SYS_CBSIZE
 250 #define CONFIG_SYS_CBSIZE               1024
 251 #undef CONFIG_SYS_MAXARGS
 252 #define CONFIG_SYS_MAXARGS              48
 253
 254 #define CONFIG_SYS_MEMTEST_START        0x10000000
 255 #define CONFIG_SYS_MEMTEST_END          0x10010000
 256 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 257
 258 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 259
 260 /* Physical Memory Map */
 261 #define CONFIG_NR_DRAM_BANKS            1
 262 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 263
 264 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 265 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 266 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 267
 268 #define CONFIG_SYS_INIT_SP_OFFSET \
 269         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 270 #define CONFIG_SYS_INIT_SP_ADDR \
 271         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 272
 273 /* environment organization */
 274
 275 #define CONFIG_ENV_SIZE                 (8 * 1024)
 276
 277 #if defined(CONFIG_ENV_IS_IN_MMC)
 278 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 279 #define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 280                                          CONFIG_TDX_CFG_BLOCK_OFFSET)
 281 #define CONFIG_SYS_MMC_ENV_DEV          0
 282 #define CONFIG_SYS_MMC_ENV_PART         1
 283 #endif
 284
 285 #define CONFIG_OF_SYSTEM_SETUP
 286
 287 #define CONFIG_CMD_TIME
 288
 289 #endif  /* __CONFIG_H */