include/configs/apalis_imx6.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2013-2015 Toradex, Inc.
   4  *
   5  * Configuration settings for the Toradex Apalis iMX6
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 #undef CONFIG_DISPLAY_BOARDINFO
  14
  15 #define CONFIG_MACH_TYPE                4886
  16
  17 #include <asm/arch/imx-regs.h>
  18 #include <asm/mach-imx/gpio.h>
  19
  20 #ifdef CONFIG_SPL
  21 #include "imx6_spl.h"
  22 #endif
  23
  24 #define CONFIG_CMDLINE_TAG
  25 #define CONFIG_SETUP_MEMORY_TAGS
  26 #define CONFIG_INITRD_TAG
  27 #define CONFIG_REVISION_TAG
  28 #define CONFIG_SERIAL_TAG
  29
  30 /* Size of malloc() pool */
  31 #define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
  32
  33 #define CONFIG_MISC_INIT_R
  34
  35 #define CONFIG_MXC_UART
  36 #define CONFIG_MXC_UART_BASE            UART1_BASE
  37
  38 /* I2C Configs */
  39 #define CONFIG_SYS_I2C
  40 #define CONFIG_SYS_I2C_MXC
  41 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  42 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  43 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  44 #define CONFIG_SYS_I2C_SPEED            100000
  45
  46 /* OCOTP Configs */
  47 #ifdef CONFIG_CMD_FUSE
  48 #define CONFIG_MXC_OCOTP
  49 #endif
  50
  51 /* MMC Configs */
  52 #define CONFIG_FSL_USDHC
  53 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  54 #define CONFIG_SYS_FSL_USDHC_NUM        3
  55
  56 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  57
  58 /*
  59  * SATA Configs
  60  */
  61 #ifdef CONFIG_CMD_SATA
  62 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  63 #define CONFIG_DWC_AHSATA_PORT_ID       0
  64 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  65 #define CONFIG_LBA48
  66 #endif
  67
  68 /* Network */
  69 #define CONFIG_FEC_MXC
  70 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  71 #define CONFIG_FEC_XCV_TYPE             RGMII
  72 #define CONFIG_ETHPRIME                 "FEC"
  73 #define CONFIG_FEC_MXC_PHYADDR          6
  74 #define CONFIG_IP_DEFRAG
  75 #define CONFIG_TFTP_BLOCKSIZE           4096
  76 #define CONFIG_TFTP_TSIZE
  77
  78 /* USB Configs */
  79 /* Host */
  80 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
  81 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
  82 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  83 #define CONFIG_MXC_USB_FLAGS            0
  84 /* Client */
  85 #define CONFIG_USBD_HS
  86
  87 #define CONFIG_USB_GADGET_MASS_STORAGE
  88 /* USB DFU */
  89 #define CONFIG_DFU_MMC
  90
  91 /* Miscellaneous commands */
  92
  93 /* Framebuffer and LCD */
  94 #define CONFIG_VIDEO_IPUV3
  95 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  96 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  97 #define CONFIG_VIDEO_BMP_RLE8
  98 #define CONFIG_SPLASH_SCREEN
  99 #define CONFIG_SPLASH_SCREEN_ALIGN
 100 #define CONFIG_BMP_16BPP
 101 #define CONFIG_VIDEO_LOGO
 102 #define CONFIG_VIDEO_BMP_LOGO
 103 #define CONFIG_CONSOLE_MUX
 104 #define CONFIG_IMX_HDMI
 105 #define CONFIG_IMX_VIDEO_SKIP
 106
 107 /* allow to overwrite serial and ethaddr */
 108 #define CONFIG_ENV_OVERWRITE
 109
 110 /* Command definition */
 111 #undef CONFIG_CMD_LOADB
 112 #undef CONFIG_CMD_LOADS
 113 #undef CONFIG_CMD_NFS
 114 #undef CONFIG_CMD_FLASH
 115
 116 #undef CONFIG_IPADDR
 117 #define CONFIG_IPADDR                   192.168.10.2
 118 #define CONFIG_NETMASK                  255.255.255.0
 119 #undef CONFIG_SERVERIP
 120 #define CONFIG_SERVERIP                 192.168.10.1
 121
 122 #define CONFIG_LOADADDR                 0x12000000
 123
 124 #ifdef CONFIG_CMD_SATA
 125 #define CONFIG_DRIVE_SATA "sata "
 126 #else
 127 #define CONFIG_DRIVE_SATA
 128 #endif
 129
 130 #ifdef CONFIG_CMD_MMC
 131 #define CONFIG_DRIVE_MMC "mmc "
 132 #else
 133 #define CONFIG_DRIVE_MMC
 134 #endif
 135
 136 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 137
 138 #define DFU_ALT_EMMC_INFO \
 139         "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
 140         "boot part 0 1;" \
 141         "rootfs part 0 2;" \
 142         "uImage fat 0 1;" \
 143         "imx6q-colibri-eval-v3.dtb fat 0 1;" \
 144         "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
 145
 146 #define EMMC_BOOTCMD \
 147         "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
 148                 "rootwait\0" \
 149         "emmcboot=run setup; " \
 150                 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 151                 "${vidargs}; echo Booting from internal eMMC chip...; " \
 152                 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
 153                 "${boot_file} && run fdt_fixup && " \
 154                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 155         "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
 156                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 157
 158 #define MEM_LAYOUT_ENV_SETTINGS \
 159         "bootm_size=0x20000000\0" \
 160         "fdt_addr_r=0x12000000\0" \
 161         "fdt_high=0xffffffff\0" \
 162         "initrd_high=0xffffffff\0" \
 163         "kernel_addr_r=0x11000000\0" \
 164         "ramdisk_addr_r=0x12100000\0"
 165
 166 #define NFS_BOOTCMD \
 167         "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 168         "nfsboot=run setup; " \
 169                 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
 170                 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 171                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
 172                 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
 173         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
 174                 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 175
 176 #define SD_BOOTCMD                                              \
 177         "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
 178                 "rootwait\0" \
 179         "sdboot=run setup; " \
 180                 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 181                 "${vidargs}; echo Booting from SD card; " \
 182                 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
 183                 "${boot_file} && run fdt_fixup && " \
 184                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 185         "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
 186                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 187
 188 #define USB_BOOTCMD \
 189         "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
 190                 "rootwait\0" \
 191         "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
 192                 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 193                 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
 194                 "${boot_file} && run fdt_fixup && " \
 195                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 196         "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
 197                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 198
 199 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
 200 #define FDT_FILE "imx6q-apalis-eval.dtb"
 201 #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
 202 #else
 203 #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
 204 #endif
 205 #define CONFIG_EXTRA_ENV_SETTINGS \
 206         "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
 207                 "run nfsboot ; echo ; echo nfsboot failed ; " \
 208                 "usb start ;" \
 209                 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 210         "boot_file=uImage\0" \
 211         "console=ttymxc0\0" \
 212         "defargs=enable_wait_mode=off vmalloc=400M\0" \
 213         "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 214         EMMC_BOOTCMD \
 215         "fdt_file=" FDT_FILE "\0" \
 216         "fdt_fixup=;\0" \
 217         MEM_LAYOUT_ENV_SETTINGS \
 218         NFS_BOOTCMD \
 219         SD_BOOTCMD \
 220         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 221                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 222                 "flash_eth.img && source ${loadaddr}\0" \
 223         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 224                 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 225                 "source ${loadaddr}\0" \
 226         "setup=setenv setupargs fec_mac=${ethaddr} " \
 227                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
 228                 "console=${console},${baudrate}n8\0 " \
 229         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 230         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 231                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 232                 "source ${loadaddr}\0" \
 233         "splashpos=m,m\0" \
 234         "vidargs=mxc_hdmi.only_cea=1 " \
 235                 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
 236                 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
 237                 "fbmem=32M\0 "
 238
 239 /* Miscellaneous configurable options */
 240 #undef CONFIG_SYS_CBSIZE
 241 #define CONFIG_SYS_CBSIZE               1024
 242 #undef CONFIG_SYS_MAXARGS
 243 #define CONFIG_SYS_MAXARGS              48
 244
 245 #define CONFIG_SYS_MEMTEST_START        0x10000000
 246 #define CONFIG_SYS_MEMTEST_END          0x10010000
 247 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 248
 249 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 250
 251 /* Physical Memory Map */
 252 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 253
 254 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 255 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 256 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 257
 258 #define CONFIG_SYS_INIT_SP_OFFSET \
 259         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 260 #define CONFIG_SYS_INIT_SP_ADDR \
 261         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 262
 263 /* environment organization */
 264
 265 #define CONFIG_ENV_SIZE                 (8 * 1024)
 266
 267 #if defined(CONFIG_ENV_IS_IN_MMC)
 268 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 269 #define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 270                                          CONFIG_TDX_CFG_BLOCK_OFFSET)
 271 #define CONFIG_SYS_MMC_ENV_DEV          0
 272 #define CONFIG_SYS_MMC_ENV_PART         1
 273 #endif
 274
 275 #define CONFIG_OF_SYSTEM_SETUP
 276
 277 #define CONFIG_CMD_TIME
 278
 279 #endif  /* __CONFIG_H */