include/configs/apalis_imx6.h

   1 /*
   2  * Copyright 2013-2015 Toradex, Inc.
   3  *
   4  * Configuration settings for the Toradex Apalis iMX6
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #undef CONFIG_DISPLAY_BOARDINFO
  15 #define CONFIG_DISPLAY_BOARDINFO_LATE   /* Calls show_board_info() */
  16
  17 #define CONFIG_MACH_TYPE                4886
  18
  19 #define CONFIG_SYS_GENERIC_BOARD
  20
  21 #include <asm/arch/imx-regs.h>
  22 #include <asm/mach-imx/gpio.h>
  23
  24 #ifdef CONFIG_SPL
  25 #include "imx6_spl.h"
  26 #define CONFIG_SPL_PAD_TO               0x11000 /* 4k IVT/DCD, 64k SPL */
  27 #endif
  28
  29 #define CONFIG_CMDLINE_TAG
  30 #define CONFIG_SETUP_MEMORY_TAGS
  31 #define CONFIG_INITRD_TAG
  32 #define CONFIG_REVISION_TAG
  33 #define CONFIG_SERIAL_TAG
  34
  35 /* Size of malloc() pool */
  36 #define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
  37
  38 #define CONFIG_MISC_INIT_R
  39
  40 #define CONFIG_MXC_UART
  41 #define CONFIG_MXC_UART_BASE            UART1_BASE
  42
  43 /* Make the HW version stuff available in U-Boot env */
  44 #define CONFIG_VERSION_VARIABLE         /* ver environment variable */
  45 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  46 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  47
  48 /* I2C Configs */
  49 #define CONFIG_SYS_I2C
  50 #define CONFIG_SYS_I2C_MXC
  51 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  52 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  53 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  54 #define CONFIG_SYS_I2C_SPEED            100000
  55
  56 /* OCOTP Configs */
  57 #ifdef CONFIG_CMD_FUSE
  58 #define CONFIG_MXC_OCOTP
  59 #endif
  60
  61 /* MMC Configs */
  62 #define CONFIG_FSL_ESDHC
  63 #define CONFIG_FSL_USDHC
  64 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  65 #define CONFIG_SYS_FSL_USDHC_NUM        3
  66
  67 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  68 #define CONFIG_BOUNCE_BUFFER
  69
  70 /*
  71  * SATA Configs
  72  */
  73 #ifdef CONFIG_CMD_SATA
  74 #define CONFIG_DWC_AHSATA
  75 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  76 #define CONFIG_DWC_AHSATA_PORT_ID       0
  77 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  78 #define CONFIG_LBA48
  79 #define CONFIG_LIBATA
  80 #endif
  81
  82 /* Network */
  83 #define CONFIG_FEC_MXC
  84 #define CONFIG_MII
  85 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  86 #define CONFIG_FEC_XCV_TYPE             RGMII
  87 #define CONFIG_ETHPRIME                 "FEC"
  88 #define CONFIG_FEC_MXC_PHYADDR          6
  89 #define CONFIG_IP_DEFRAG
  90 #define CONFIG_TFTP_BLOCKSIZE           4096
  91 #define CONFIG_TFTP_TSIZE
  92
  93 /* USB Configs */
  94 /* Host */
  95 #define CONFIG_USB_HOST_ETHER
  96 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
  97 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
  98 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  99 #define CONFIG_MXC_USB_FLAGS            0
 100 #define CONFIG_USB_KEYBOARD
 101 #ifdef CONFIG_USB_KEYBOARD
 102 #define CONFIG_SYS_USB_EVENT_POLL
 103 #endif /* CONFIG_USB_KEYBOARD */
 104 /* Client */
 105 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 106 #define CONFIG_USBD_HS
 107
 108 #define CONFIG_USB_GADGET_MASS_STORAGE
 109 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 110 #define CONFIG_G_DNL_MANUFACTURER       "Toradex"
 111 /* USB DFU */
 112 #define CONFIG_DFU_MMC
 113
 114 /* Miscellaneous commands */
 115 #define CONFIG_MXC_GPIO
 116
 117 /* Framebuffer and LCD */
 118 #define CONFIG_VIDEO_IPUV3
 119 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 120 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 121 #define CONFIG_VIDEO_BMP_RLE8
 122 #define CONFIG_SPLASH_SCREEN
 123 #define CONFIG_SPLASH_SCREEN_ALIGN
 124 #define CONFIG_BMP_16BPP
 125 #define CONFIG_VIDEO_LOGO
 126 #define CONFIG_VIDEO_BMP_LOGO
 127 #define CONFIG_IPUV3_CLK                260000000
 128 #define CONFIG_CONSOLE_MUX
 129 #define CONFIG_IMX_HDMI
 130 #define CONFIG_IMX_VIDEO_SKIP
 131
 132 /* allow to overwrite serial and ethaddr */
 133 #define CONFIG_ENV_OVERWRITE
 134 #define CONFIG_CONS_INDEX               1
 135
 136 /* Command definition */
 137 #undef CONFIG_CMD_LOADB
 138 #undef CONFIG_CMD_LOADS
 139 #undef CONFIG_CMD_NFS
 140 #undef CONFIG_CMD_FLASH
 141
 142 #undef CONFIG_IPADDR
 143 #define CONFIG_IPADDR                   192.168.10.2
 144 #define CONFIG_NETMASK                  255.255.255.0
 145 #undef CONFIG_SERVERIP
 146 #define CONFIG_SERVERIP                 192.168.10.1
 147
 148 #define CONFIG_LOADADDR                 0x12000000
 149 #define CONFIG_SYS_TEXT_BASE            0x17800000
 150
 151 #ifdef CONFIG_CMD_SATA
 152 #define CONFIG_DRIVE_SATA "sata "
 153 #else
 154 #define CONFIG_DRIVE_SATA
 155 #endif
 156
 157 #ifdef CONFIG_CMD_MMC
 158 #define CONFIG_DRIVE_MMC "mmc "
 159 #else
 160 #define CONFIG_DRIVE_MMC
 161 #endif
 162
 163 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 164
 165 #define DFU_ALT_EMMC_INFO \
 166         "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
 167         "boot part 0 1;" \
 168         "rootfs part 0 2;" \
 169         "uImage fat 0 1;" \
 170         "imx6q-colibri-eval-v3.dtb fat 0 1;" \
 171         "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
 172
 173 #define EMMC_BOOTCMD \
 174         "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
 175                 "rootwait\0" \
 176         "emmcboot=run setup; " \
 177                 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 178                 "${vidargs}; echo Booting from internal eMMC chip...; " \
 179                 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
 180                 "${boot_file} && run fdt_fixup && " \
 181                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 182         "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
 183                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 184
 185 #define MEM_LAYOUT_ENV_SETTINGS \
 186         "bootm_size=0x20000000\0" \
 187         "fdt_addr_r=0x12000000\0" \
 188         "fdt_high=0xffffffff\0" \
 189         "initrd_high=0xffffffff\0" \
 190         "kernel_addr_r=0x11000000\0" \
 191         "ramdisk_addr_r=0x12100000\0"
 192
 193 #define NFS_BOOTCMD \
 194         "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 195         "nfsboot=run setup; " \
 196                 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
 197                 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 198                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
 199                 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
 200         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
 201                 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 202
 203 #define SD_BOOTCMD                                              \
 204         "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
 205                 "rootwait\0" \
 206         "sdboot=run setup; " \
 207                 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 208                 "${vidargs}; echo Booting from SD card; " \
 209                 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
 210                 "${boot_file} && run fdt_fixup && " \
 211                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 212         "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
 213                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 214
 215 #define USB_BOOTCMD \
 216         "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
 217                 "rootwait\0" \
 218         "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
 219                 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 220                 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
 221                 "${boot_file} && run fdt_fixup && " \
 222                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 223         "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
 224                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 225
 226 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
 227 #define FDT_FILE "imx6q-apalis-eval.dtb"
 228 #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
 229 #else
 230 #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
 231 #endif
 232 #define CONFIG_EXTRA_ENV_SETTINGS \
 233         "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
 234                 "run nfsboot ; echo ; echo nfsboot failed ; " \
 235                 "usb start ;" \
 236                 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 237         "boot_file=uImage\0" \
 238         "console=ttymxc0\0" \
 239         "defargs=enable_wait_mode=off vmalloc=400M\0" \
 240         "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 241         EMMC_BOOTCMD \
 242         "fdt_file=" FDT_FILE "\0" \
 243         "fdt_fixup=;\0" \
 244         MEM_LAYOUT_ENV_SETTINGS \
 245         NFS_BOOTCMD \
 246         SD_BOOTCMD \
 247         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 248                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 249                 "flash_eth.img && source ${loadaddr}\0" \
 250         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 251                 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 252                 "source ${loadaddr}\0" \
 253         "setup=setenv setupargs fec_mac=${ethaddr} " \
 254                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
 255                 "console=${console},${baudrate}n8\0 " \
 256         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 257         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 258                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 259                 "source ${loadaddr}\0" \
 260         "splashpos=m,m\0" \
 261         "vidargs=mxc_hdmi.only_cea=1 " \
 262                 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
 263                 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
 264                 "fbmem=32M\0 "
 265
 266 /* Miscellaneous configurable options */
 267 #define CONFIG_SYS_LONGHELP
 268 #define CONFIG_AUTO_COMPLETE
 269 #undef CONFIG_SYS_CBSIZE
 270 #define CONFIG_SYS_CBSIZE               1024
 271 #undef CONFIG_SYS_MAXARGS
 272 #define CONFIG_SYS_MAXARGS              48
 273
 274 #define CONFIG_SYS_ALT_MEMTEST
 275 #define CONFIG_SYS_MEMTEST_START        0x10000000
 276 #define CONFIG_SYS_MEMTEST_END          0x10010000
 277 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 278
 279 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 280
 281 #define CONFIG_CMDLINE_EDITING
 282
 283 /* Physical Memory Map */
 284 #define CONFIG_NR_DRAM_BANKS            1
 285 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 286
 287 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 288 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 289 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 290
 291 #define CONFIG_SYS_INIT_SP_OFFSET \
 292         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 293 #define CONFIG_SYS_INIT_SP_ADDR \
 294         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 295
 296 /* environment organization */
 297
 298 #define CONFIG_ENV_SIZE                 (8 * 1024)
 299
 300 #if defined(CONFIG_ENV_IS_IN_MMC)
 301 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 302 #define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 303                                          CONFIG_TDX_CFG_BLOCK_OFFSET)
 304 #define CONFIG_SYS_MMC_ENV_DEV          0
 305 #define CONFIG_SYS_MMC_ENV_PART         1
 306 #endif
 307
 308 #define CONFIG_OF_SYSTEM_SETUP
 309
 310 #define CONFIG_CMD_TIME
 311
 312 #define CONFIG_SUPPORT_RAW_INITRD
 313
 314 #endif  /* __CONFIG_H */