include/configs/at91-sama5_common.h

   1 /*
   2  * Common part of configuration settings for the AT91 SAMA5 board.
   3  *
   4  * Copyright (C) 2015 Atmel Corporation
   5  *                    Josh Wu <josh.wu@atmel.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __AT91_SAMA5_COMMON_H
  11 #define __AT91_SAMA5_COMMON_H
  12
  13 #include <asm/hardware.h>
  14
  15 #define CONFIG_SYS_CACHELINE_SIZE       32
  16
  17 #define CONFIG_SYS_TEXT_BASE            0x26f00000
  18
  19 /* ARM asynchronous clock */
  20 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
  21 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
  22
  23 #define CONFIG_ARCH_CPU_INIT
  24
  25 #ifndef CONFIG_SPL_BUILD
  26 #define CONFIG_SKIP_LOWLEVEL_INIT
  27 #endif
  28
  29 #define CONFIG_BOARD_EARLY_INIT_F
  30 #define CONFIG_DISPLAY_CPUINFO
  31
  32 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  33 #define CONFIG_CMD_BOOTZ
  34 #define CONFIG_OF_LIBFDT                /* Device Tree support */
  35
  36
  37 /* general purpose I/O */
  38 #define CONFIG_AT91_GPIO
  39
  40 #define CONFIG_BOOTDELAY                3
  41
  42 /*
  43  * BOOTP options
  44  */
  45 #define CONFIG_BOOTP_BOOTFILESIZE
  46 #define CONFIG_BOOTP_BOOTPATH
  47 #define CONFIG_BOOTP_GATEWAY
  48 #define CONFIG_BOOTP_HOSTNAME
  49
  50 /*
  51  * Command line configuration.
  52  */
  53 #define CONFIG_CMD_PING
  54 #define CONFIG_CMD_DHCP
  55
  56 #ifdef CONFIG_SYS_USE_MMC
  57
  58 #ifdef CONFIG_ENV_IS_IN_MMC
  59 /* Use raw reserved sectors to save environment */
  60 #define CONFIG_ENV_OFFSET               0x2000
  61 #define CONFIG_ENV_SIZE                 0x1000
  62 #define CONFIG_SYS_MMC_ENV_DEV          0
  63 #else
  64 /* u-boot env in sd/mmc card */
  65 #define CONFIG_ENV_IS_IN_FAT
  66 #define CONFIG_FAT_WRITE
  67 #define FAT_ENV_INTERFACE       "mmc"
  68 #define FAT_ENV_DEVICE_AND_PART "0"
  69 #define FAT_ENV_FILE            "uboot.env"
  70 #define CONFIG_ENV_SIZE         0x4000
  71 #endif
  72
  73 #define CONFIG_BOOTCOMMAND      "if test ! -n ${dtb_name}; then "       \
  74                                     "setenv dtb_name at91-${board_name}.dtb; " \
  75                                 "fi; "                                  \
  76                                 "fatload mmc 0:1 0x21000000 ${dtb_name}; " \
  77                                 "fatload mmc 0:1 0x22000000 zImage; "   \
  78                                 "bootz 0x22000000 - 0x21000000"
  79 #define CONFIG_BOOTARGS                                                 \
  80         "console=ttyS0,115200 earlyprintk "                             \
  81         "root=/dev/mmcblk0p2 rw rootwait"
  82 #else
  83 #define CONFIG_BOOTARGS                                                 \
  84         "console=ttyS0,115200 earlyprintk "                             \
  85         "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
  86         "256K(env),256k(env_redundent),256k(spare),"                    \
  87         "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
  88         "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
  89
  90 #ifdef CONFIG_SYS_USE_NANDFLASH
  91 /* u-boot env in nand flash */
  92 #define CONFIG_ENV_IS_IN_NAND
  93 #define CONFIG_ENV_OFFSET               0xc0000
  94 #define CONFIG_ENV_OFFSET_REDUND        0x100000
  95 #define CONFIG_ENV_SIZE                 0x20000
  96 #define CONFIG_BOOTCOMMAND              "nand read 0x21000000 0x180000 0x80000;"        \
  97                                         "nand read 0x22000000 0x200000 0x600000;"       \
  98                                         "bootz 0x22000000 - 0x21000000"
  99 #elif CONFIG_SYS_USE_SERIALFLASH
 100 /* u-boot env in serial flash, by default is bus 0 and cs 0 */
 101 #define CONFIG_ENV_IS_IN_SPI_FLASH
 102 #define CONFIG_ENV_OFFSET               0x6000
 103 #define CONFIG_ENV_SIZE                 0x2000
 104 #define CONFIG_ENV_SECT_SIZE            0x1000
 105 #define CONFIG_BOOTCOMMAND              "sf probe 0; "                          \
 106                                         "sf read 0x21000000 0x60000 0xc000; "   \
 107                                         "sf read 0x22000000 0x6c000 0x394000; " \
 108                                         "bootz 0x22000000 - 0x21000000"
 109 #endif
 110
 111 #endif
 112
 113 #define CONFIG_BAUDRATE                 115200
 114
 115 #define CONFIG_SYS_CBSIZE               256
 116 #define CONFIG_SYS_MAXARGS              16
 117 #define CONFIG_SYS_LONGHELP
 118 #define CONFIG_CMDLINE_EDITING
 119 #define CONFIG_AUTO_COMPLETE
 120 #define CONFIG_SYS_HUSH_PARSER
 121
 122 /* Size of malloc() pool */
 123 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 124
 125 #endif