include/configs/bf561-ezkit.h

   1 /*
   2  * U-boot - Configuration file for BF561 EZKIT board
   3  */
   4
   5 #ifndef __CONFIG_BF561_EZKIT_H__
   6 #define __CONFIG_BF561_EZKIT_H__
   7
   8 #include <asm/config-pre.h>
   9
  10
  11 /*
  12  * Processor Settings
  13  */
  14 #define CONFIG_BFIN_CPU             bf561-0.3
  15 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
  16
  17
  18 /*
  19  * Clock Settings
  20  *      CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
  21  *      SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
  22  */
  23 /* CONFIG_CLKIN_HZ is any value in Hz                                   */
  24 #define CONFIG_CLKIN_HZ                 30000000
  25 /* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN             */
  26 /*                                                1 = CLKIN / 2         */
  27 #define CONFIG_CLKIN_HALF               0
  28 /* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass     */
  29 /*                                                1 = bypass PLL        */
  30 #define CONFIG_PLL_BYPASS               0
  31 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL              */
  32 /* Values can range from 0-63 (where 0 means 64)                        */
  33 #define CONFIG_VCO_MULT                 20
  34 /* CCLK_DIV controls the core clock divider                             */
  35 /* Values can be 1, 2, 4, or 8 ONLY                                     */
  36 #define CONFIG_CCLK_DIV                 1
  37 /* SCLK_DIV controls the system clock divider                           */
  38 /* Values can range from 1-15                                           */
  39 #define CONFIG_SCLK_DIV                 6
  40
  41
  42 /*
  43  * Memory Settings
  44  */
  45 #define CONFIG_MEM_ADD_WDTH     9
  46 #define CONFIG_MEM_SIZE         64
  47
  48 #define CONFIG_EBIU_SDRRC_VAL   0x306
  49 #define CONFIG_EBIU_SDGCTL_VAL  0x91114d
  50
  51 #define CONFIG_EBIU_AMGCTL_VAL  0x3F
  52 #define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
  53 #define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
  54
  55 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024)
  56 #define CONFIG_SYS_MALLOC_LEN   (128 * 1024)
  57
  58
  59 /*
  60  * Network Settings
  61  */
  62 #define ADI_CMDS_NETWORK        1
  63 #define CONFIG_SMC91111 1
  64 #define CONFIG_SMC91111_BASE    0x2C010300
  65 #define CONFIG_SMC_USE_32_BIT   1
  66 #define CONFIG_HOSTNAME         bf561-ezkit
  67 /* Uncomment next line to use fixed MAC address */
  68 /* #define CONFIG_ETHADDR       02:80:ad:20:31:e8 */
  69
  70
  71 /*
  72  * Flash Settings
  73  */
  74 #define CONFIG_SYS_FLASH_CFI
  75 #define CONFIG_FLASH_CFI_DRIVER
  76 #define CONFIG_SYS_FLASH_CFI_AMD_RESET
  77 #define CONFIG_SYS_FLASH_BASE           0x20000000
  78 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  79 #define CONFIG_SYS_MAX_FLASH_SECT       135
  80 /* The BF561-EZKIT uses a top boot flash */
  81 #define CONFIG_ENV_IS_IN_FLASH  1
  82 #define CONFIG_ENV_OFFSET       (0x800000 - CONFIG_ENV_SECT_SIZE)
  83 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
  84 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
  85 #define CONFIG_ENV_SECT_SIZE    0x2000
  86
  87
  88 /*
  89  * I2C Settings
  90  */
  91 #define CONFIG_SOFT_I2C
  92 #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
  93 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
  94
  95
  96 /*
  97  * Misc Settings
  98  */
  99 #define CONFIG_UART_CONSOLE     0
 100
 101 /*
 102  * Run core 1 from L1 SRAM start address when init uboot on core 0
 103  */
 104 /* #define CONFIG_CORE1_RUN     1 */
 105
 106
 107 /*
 108  * Pull in common ADI header for remaining command/environment setup
 109  */
 110 #include <configs/bfin_adi_common.h>
 111
 112 #endif