include/configs/bfin_adi_common.h

   1 /*
   2  * U-Boot - Common settings for Analog Devices boards
   3  */
   4
   5 #ifndef __CONFIG_BFIN_ADI_COMMON_H__
   6 #define __CONFIG_BFIN_ADI_COMMON_H__
   7
   8 /*
   9  * Command Settings
  10  */
  11 #ifndef _CONFIG_CMD_DEFAULT_H
  12 # include <config_cmd_default.h>
  13 # if ADI_CMDS_NETWORK
  14 #  define CONFIG_CMD_DHCP
  15 #  define CONFIG_BOOTP_SUBNETMASK
  16 #  define CONFIG_BOOTP_GATEWAY
  17 #  define CONFIG_BOOTP_DNS
  18 #  define CONFIG_BOOTP_NTPSERVER
  19 #  define CONFIG_BOOTP_RANDOM_DELAY
  20 #  define CONFIG_KEEP_SERVERADDR
  21 #  define CONFIG_CMD_DNS
  22 #  define CONFIG_CMD_PING
  23 #  ifdef CONFIG_BFIN_MAC
  24 #   define CONFIG_CMD_MII
  25 #  endif
  26 # else
  27 #  undef CONFIG_CMD_BOOTD
  28 #  undef CONFIG_CMD_NET
  29 #  undef CONFIG_CMD_NFS
  30 # endif
  31 # ifdef CONFIG_LIBATA
  32 #  define CONFIG_CMD_FAT
  33 #  define CONFIG_CMD_SATA
  34 #  define CONFIG_DOS_PARTITION
  35 # endif
  36 # ifdef CONFIG_MMC
  37 #  define CONFIG_CMD_FAT
  38 #  define CONFIG_CMD_MMC
  39 #  define CONFIG_DOS_PARTITION
  40 # endif
  41 # ifdef CONFIG_USB
  42 #  define CONFIG_CMD_EXT2
  43 #  define CONFIG_CMD_FAT
  44 #  define CONFIG_CMD_USB
  45 #  define CONFIG_CMD_USB_STORAGE
  46 #  define CONFIG_DOS_PARTITION
  47 # endif
  48 # ifdef CONFIG_NAND_PLAT
  49 #  define CONFIG_CMD_NAND
  50 # endif
  51 # ifdef CONFIG_POST
  52 #  define CONFIG_CMD_DIAG
  53 # endif
  54 # ifdef CONFIG_RTC_BFIN
  55 #  define CONFIG_CMD_DATE
  56 #  if ADI_CMDS_NETWORK
  57 #   define CONFIG_CMD_SNTP
  58 #  endif
  59 # endif
  60 # ifdef CONFIG_SPI
  61 #  define CONFIG_CMD_EEPROM
  62 # endif
  63 # if defined(CONFIG_BFIN_SPI) || defined(CONFIG_SOFT_SPI)
  64 #  define CONFIG_CMD_SPI
  65 # endif
  66 # ifdef CONFIG_SPI_FLASH
  67 #  define CONFIG_CMD_SF
  68 # endif
  69 # if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
  70 #  define CONFIG_CMD_I2C
  71 # endif
  72 # ifdef CONFIG_SYS_NO_FLASH
  73 #  undef CONFIG_CMD_FLASH
  74 #  undef CONFIG_CMD_IMLS
  75 # else
  76 #  define CONFIG_CMD_JFFS2
  77 # endif
  78 # define CONFIG_CMD_BOOTLDR
  79 # define CONFIG_CMD_CACHE
  80 # define CONFIG_CMD_CPLBINFO
  81 # define CONFIG_CMD_ELF
  82 # define CONFIG_ELF_SIMPLE_LOAD
  83 # define CONFIG_CMD_REGINFO
  84 # define CONFIG_CMD_STRINGS
  85 # if defined(__ADSPBF51x__) || defined(__ADSPBF52x__) || defined(__ADSPBF54x__)
  86 #  define CONFIG_CMD_OTP
  87 #  define CONFIG_CMD_SPIBOOTLDR
  88 # endif
  89 #endif
  90 #ifdef CONFIG_CMD_NAND
  91 # define CONFIG_SYS_64BIT_VSPRINTF
  92 #endif
  93
  94 /*
  95  * Console Settings
  96  */
  97 #define CONFIG_SYS_LONGHELP     1
  98 #define CONFIG_CMDLINE_EDITING  1
  99 #define CONFIG_AUTO_COMPLETE    1
 100 #define CONFIG_LOADS_ECHO       1
 101 #define CONFIG_JTAG_CONSOLE
 102 #ifndef CONFIG_BAUDRATE
 103 # define CONFIG_BAUDRATE        57600
 104 #endif
 105
 106 /*
 107  * Debug Settings
 108  */
 109 #define CONFIG_ENV_OVERWRITE    1
 110 #define CONFIG_DEBUG_DUMP       1
 111 #define CONFIG_KALLSYMS         1
 112 #define CONFIG_PANIC_HANG       1
 113
 114 /*
 115  * Env Settings
 116  */
 117 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
 118 # define CONFIG_BOOTDELAY       -1
 119 #else
 120 # define CONFIG_BOOTDELAY       5
 121 #endif
 122 #ifndef CONFIG_BOOTCOMMAND
 123 # define CONFIG_BOOTCOMMAND     "run ramboot"
 124 #endif
 125 #ifdef CONFIG_VIDEO
 126 # define CONFIG_BOOTARGS_VIDEO "console=tty0 "
 127 #else
 128 # define CONFIG_BOOTARGS_VIDEO ""
 129 #endif
 130 #ifndef CONFIG_BOOTARGS_ROOT
 131 # define CONFIG_BOOTARGS_ROOT "/dev/mtdblock0 rw"
 132 #endif
 133 #define CONFIG_BOOTARGS \
 134         "root=" CONFIG_BOOTARGS_ROOT " " \
 135         "clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \
 136         "earlyprintk=" \
 137                 "serial," \
 138                 "uart" MK_STR(CONFIG_UART_CONSOLE) "," \
 139                 MK_STR(CONFIG_BAUDRATE) " " \
 140         CONFIG_BOOTARGS_VIDEO \
 141         "console=ttyBF0," MK_STR(CONFIG_BAUDRATE)
 142 #if defined(CONFIG_CMD_NAND)
 143 # define NAND_ENV_SETTINGS \
 144         "nandargs=set bootargs " CONFIG_BOOTARGS "\0" \
 145         "nandboot=" \
 146                 "nand read $(loadaddr) 0x20000 0x100000;" \
 147                 "run nandargs;" \
 148                 "bootm" \
 149                 "\0"
 150 #else
 151 # define NAND_ENV_SETTINGS
 152 #endif
 153 #if defined(CONFIG_CMD_NET)
 154 # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 155 #  define UBOOT_ENV_FILE "u-boot.bin"
 156 # else
 157 #  define UBOOT_ENV_FILE "u-boot.ldr"
 158 # endif
 159 # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
 160 #  ifdef CONFIG_SPI
 161 #   define UBOOT_ENV_UPDATE \
 162                 "eeprom write $(loadaddr) 0x0 $(filesize)"
 163 #  else
 164 #   define UBOOT_ENV_UPDATE \
 165                 "sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
 166                 "sf erase 0 0x40000;" \
 167                 "sf write $(loadaddr) 0 $(filesize)"
 168 #  endif
 169 # elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
 170 #  define UBOOT_ENV_UPDATE \
 171                 "nand unlock 0 0x40000;" \
 172                 "nand erase 0 0x40000;" \
 173                 "nand write $(loadaddr) 0 0x40000"
 174 # else
 175 #  define UBOOT_ENV_UPDATE \
 176                 "protect off 0x20000000 +$(filesize);" \
 177                 "erase 0x20000000 +$(filesize);" \
 178                 "cp.b $(loadaddr) 0x20000000 $(filesize)"
 179 # endif
 180 # define NETWORK_ENV_SETTINGS \
 181         "ubootfile=" UBOOT_ENV_FILE "\0" \
 182         "update=" \
 183                 "tftp $(loadaddr) $(ubootfile);" \
 184                 UBOOT_ENV_UPDATE \
 185                 "\0" \
 186         "addip=set bootargs $(bootargs) " \
 187                 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \
 188                    "$(hostname):eth0:off" \
 189                 "\0" \
 190         \
 191         "ramfile=uImage\0" \
 192         "ramargs=set bootargs " CONFIG_BOOTARGS "\0" \
 193         "ramboot=" \
 194                 "tftp $(loadaddr) $(ramfile);" \
 195                 "run ramargs;" \
 196                 "run addip;" \
 197                 "bootm" \
 198                 "\0" \
 199         \
 200         "nfsfile=vmImage\0" \
 201         "nfsargs=set bootargs " \
 202                 "root=/dev/nfs rw " \
 203                 "nfsroot=$(serverip):$(rootpath),tcp,nfsvers=3" \
 204                 "\0" \
 205         "nfsboot=" \
 206                 "tftp $(loadaddr) $(nfsfile);" \
 207                 "run nfsargs;" \
 208                 "run addip;" \
 209                 "bootm" \
 210                 "\0"
 211 #else
 212 # define NETWORK_ENV_SETTINGS
 213 #endif
 214 #define CONFIG_EXTRA_ENV_SETTINGS \
 215         NAND_ENV_SETTINGS \
 216         NETWORK_ENV_SETTINGS \
 217         "flashboot=bootm 0x20100000\0"
 218
 219 /*
 220  * Network Settings
 221  */
 222 #ifdef CONFIG_CMD_NET
 223 # define CONFIG_IPADDR          192.168.0.15
 224 # define CONFIG_NETMASK         255.255.255.0
 225 # define CONFIG_GATEWAYIP       192.168.0.1
 226 # define CONFIG_SERVERIP        192.168.0.2
 227 # define CONFIG_ROOTPATH        /romfs
 228 # ifdef CONFIG_CMD_DHCP
 229 #  ifndef CONFIG_SYS_AUTOLOAD
 230 #   define CONFIG_SYS_AUTOLOAD "no"
 231 #  endif
 232 # endif
 233 # define CONFIG_NET_RETRY_COUNT 20
 234 #endif
 235
 236 /*
 237  * Misc Settings
 238  */
 239 #define CONFIG_LZMA
 240
 241 #endif