include/configs/bfin_adi_common.h

   1 /*
   2  * U-Boot - Common settings for Analog Devices boards
   3  */
   4
   5 #ifndef __CONFIG_BFIN_ADI_COMMON_H__
   6 #define __CONFIG_BFIN_ADI_COMMON_H__
   7
   8 /*
   9  * Command Settings
  10  */
  11 #ifndef _CONFIG_CMD_DEFAULT_H
  12 # include <config_cmd_default.h>
  13 # if ADI_CMDS_NETWORK
  14 #  define CONFIG_CMD_DHCP
  15 #  define CONFIG_BOOTP_SUBNETMASK
  16 #  define CONFIG_BOOTP_GATEWAY
  17 #  define CONFIG_BOOTP_DNS
  18 #  define CONFIG_BOOTP_NTPSERVER
  19 #  define CONFIG_BOOTP_RANDOM_DELAY
  20 #  define CONFIG_KEEP_SERVERADDR
  21 #  define CONFIG_CMD_DNS
  22 #  define CONFIG_CMD_PING
  23 #  ifdef CONFIG_BFIN_MAC
  24 #   define CONFIG_CMD_MII
  25 #  endif
  26 # else
  27 #  undef CONFIG_CMD_BOOTD
  28 #  undef CONFIG_CMD_NET
  29 #  undef CONFIG_CMD_NFS
  30 # endif
  31 # ifdef CONFIG_LIBATA
  32 #  define CONFIG_CMD_FAT
  33 #  define CONFIG_CMD_SATA
  34 #  define CONFIG_DOS_PARTITION
  35 # endif
  36 # ifdef CONFIG_MMC
  37 #  define CONFIG_CMD_FAT
  38 #  define CONFIG_CMD_MMC
  39 #  define CONFIG_DOS_PARTITION
  40 # endif
  41 # ifdef CONFIG_USB
  42 #  define CONFIG_CMD_EXT2
  43 #  define CONFIG_CMD_FAT
  44 #  define CONFIG_CMD_USB
  45 #  define CONFIG_CMD_USB_STORAGE
  46 #  define CONFIG_DOS_PARTITION
  47 # endif
  48 # if defined(CONFIG_NAND_PLAT) || defined(CONFIG_DRIVER_NAND_BFIN)
  49 #  define CONFIG_CMD_NAND
  50 # endif
  51 # ifdef CONFIG_POST
  52 #  define CONFIG_CMD_DIAG
  53 # endif
  54 # ifdef CONFIG_RTC_BFIN
  55 #  define CONFIG_CMD_DATE
  56 #  if ADI_CMDS_NETWORK
  57 #   define CONFIG_CMD_SNTP
  58 #  endif
  59 # endif
  60 # ifdef CONFIG_SPI
  61 #  define CONFIG_CMD_EEPROM
  62 # endif
  63 # if defined(CONFIG_BFIN_SPI) || defined(CONFIG_SOFT_SPI)
  64 #  define CONFIG_CMD_SPI
  65 # endif
  66 # ifdef CONFIG_SPI_FLASH
  67 #  define CONFIG_CMD_SF
  68 # endif
  69 # if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
  70 #  define CONFIG_CMD_I2C
  71 # endif
  72 # ifdef CONFIG_SYS_NO_FLASH
  73 #  undef CONFIG_CMD_FLASH
  74 #  undef CONFIG_CMD_IMLS
  75 # else
  76 #  define CONFIG_CMD_JFFS2
  77 # endif
  78 # ifdef CONFIG_CMD_JFFS2
  79 #  define CONFIG_JFFS2_SUMMARY
  80 # endif
  81 # define CONFIG_CMD_BOOTLDR
  82 # define CONFIG_CMD_CACHE
  83 # define CONFIG_CMD_CPLBINFO
  84 # define CONFIG_CMD_ELF
  85 # define CONFIG_ELF_SIMPLE_LOAD
  86 # define CONFIG_CMD_GPIO
  87 # define CONFIG_CMD_KGDB
  88 # define CONFIG_CMD_REGINFO
  89 # define CONFIG_CMD_STRINGS
  90 # if defined(__ADSPBF51x__) || defined(__ADSPBF52x__) || defined(__ADSPBF54x__)
  91 #  define CONFIG_CMD_OTP
  92 #  define CONFIG_CMD_SPIBOOTLDR
  93 # endif
  94 #endif
  95
  96 /*
  97  * Console Settings
  98  */
  99 #define CONFIG_SYS_LONGHELP     1
 100 #define CONFIG_CMDLINE_EDITING  1
 101 #define CONFIG_AUTO_COMPLETE    1
 102 #define CONFIG_LOADS_ECHO       1
 103 #define CONFIG_JTAG_CONSOLE
 104 #define CONFIG_SILENT_CONSOLE
 105 #ifndef CONFIG_BAUDRATE
 106 # define CONFIG_BAUDRATE        57600
 107 #endif
 108
 109 /*
 110  * Debug Settings
 111  */
 112 #define CONFIG_ENV_OVERWRITE    1
 113 #define CONFIG_DEBUG_DUMP       1
 114 #define CONFIG_KALLSYMS         1
 115 #define CONFIG_PANIC_HANG       1
 116
 117 /*
 118  * Env Settings
 119  */
 120 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
 121 # define CONFIG_BOOTDELAY       -1
 122 #else
 123 # define CONFIG_BOOTDELAY       5
 124 #endif
 125 #ifndef CONFIG_BOOTCOMMAND
 126 # define CONFIG_BOOTCOMMAND     "run ramboot"
 127 #endif
 128 #ifdef CONFIG_VIDEO
 129 # define CONFIG_BOOTARGS_VIDEO "console=tty0 "
 130 #else
 131 # define CONFIG_BOOTARGS_VIDEO ""
 132 #endif
 133 #ifndef CONFIG_BOOTARGS_ROOT
 134 # define CONFIG_BOOTARGS_ROOT "/dev/mtdblock0 rw"
 135 #endif
 136 #ifndef FLASHBOOT_ENV_SETTINGS
 137 # define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20100000\0"
 138 #endif
 139 #define CONFIG_BOOTARGS \
 140         "root=" CONFIG_BOOTARGS_ROOT " " \
 141         "clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \
 142         "earlyprintk=" \
 143                 "serial," \
 144                 "uart" MK_STR(CONFIG_UART_CONSOLE) "," \
 145                 MK_STR(CONFIG_BAUDRATE) " " \
 146         CONFIG_BOOTARGS_VIDEO \
 147         "console=ttyBF" MK_STR(CONFIG_UART_CONSOLE) "," MK_STR(CONFIG_BAUDRATE)
 148 #if defined(CONFIG_CMD_NAND)
 149 # define NAND_ENV_SETTINGS \
 150         "nandargs=set bootargs " CONFIG_BOOTARGS "\0" \
 151         "nandboot=" \
 152                 "nand read $(loadaddr) 0x20000 0x100000;" \
 153                 "run nandargs;" \
 154                 "bootm" \
 155                 "\0"
 156 #else
 157 # define NAND_ENV_SETTINGS
 158 #endif
 159 #if defined(CONFIG_CMD_NET)
 160 # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 161 #  define UBOOT_ENV_FILE "u-boot.bin"
 162 # else
 163 #  define UBOOT_ENV_FILE "u-boot.ldr"
 164 # endif
 165 # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
 166 #  ifdef CONFIG_SPI
 167 #   define UBOOT_ENV_UPDATE \
 168                 "eeprom write $(loadaddr) 0x0 $(filesize)"
 169 #  else
 170 #   define UBOOT_ENV_UPDATE \
 171                 "sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
 172                 "sf erase 0 0x40000;" \
 173                 "sf write $(loadaddr) 0 $(filesize)"
 174 #  endif
 175 # elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
 176 #  define UBOOT_ENV_UPDATE \
 177                 "nand unlock 0 0x40000;" \
 178                 "nand erase 0 0x40000;" \
 179                 "nand write $(loadaddr) 0 0x40000"
 180 # else
 181 #  define UBOOT_ENV_UPDATE \
 182                 "protect off 0x20000000 +$(filesize);" \
 183                 "erase 0x20000000 +$(filesize);" \
 184                 "cp.b $(loadaddr) 0x20000000 $(filesize)"
 185 # endif
 186 # ifdef CONFIG_NETCONSOLE
 187 #  define NETCONSOLE_ENV \
 188         "nc=" \
 189                 "set ncip ${serverip};" \
 190                 "set stdin nc;" \
 191                 "set stdout nc" \
 192                 "\0"
 193 # else
 194 #  define NETCONSOLE_ENV
 195 # endif
 196 # define NETWORK_ENV_SETTINGS \
 197         NETCONSOLE_ENV \
 198         \
 199         "ubootfile=" UBOOT_ENV_FILE "\0" \
 200         "update=" \
 201                 "tftp $(loadaddr) $(ubootfile);" \
 202                 UBOOT_ENV_UPDATE \
 203                 "\0" \
 204         "addip=set bootargs $(bootargs) " \
 205                 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \
 206                    "$(hostname):eth0:off" \
 207                 "\0" \
 208         \
 209         "ramfile=uImage\0" \
 210         "ramargs=set bootargs " CONFIG_BOOTARGS "\0" \
 211         "ramboot=" \
 212                 "tftp $(loadaddr) $(ramfile);" \
 213                 "run ramargs;" \
 214                 "run addip;" \
 215                 "bootm" \
 216                 "\0" \
 217         \
 218         "nfsfile=vmImage\0" \
 219         "nfsargs=set bootargs " \
 220                 "root=/dev/nfs rw " \
 221                 "nfsroot=$(serverip):$(rootpath),tcp,nfsvers=3" \
 222                 "\0" \
 223         "nfsboot=" \
 224                 "tftp $(loadaddr) $(nfsfile);" \
 225                 "run nfsargs;" \
 226                 "run addip;" \
 227                 "bootm" \
 228                 "\0"
 229 #else
 230 # define NETWORK_ENV_SETTINGS
 231 #endif
 232 #define CONFIG_EXTRA_ENV_SETTINGS \
 233         NAND_ENV_SETTINGS \
 234         NETWORK_ENV_SETTINGS \
 235         FLASHBOOT_ENV_SETTINGS
 236
 237 /*
 238  * Network Settings
 239  */
 240 #ifdef CONFIG_CMD_NET
 241 # define CONFIG_IPADDR          192.168.0.15
 242 # define CONFIG_NETMASK         255.255.255.0
 243 # define CONFIG_GATEWAYIP       192.168.0.1
 244 # define CONFIG_SERVERIP        192.168.0.2
 245 # define CONFIG_ROOTPATH        /romfs
 246 # ifdef CONFIG_CMD_DHCP
 247 #  ifndef CONFIG_SYS_AUTOLOAD
 248 #   define CONFIG_SYS_AUTOLOAD "no"
 249 #  endif
 250 # endif
 251 # define CONFIG_IP_DEFRAG
 252 # define CONFIG_NET_RETRY_COUNT 20
 253 #endif
 254
 255 /*
 256  * I2C Settings
 257  */
 258 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
 259 # ifndef CONFIG_SYS_I2C_SPEED
 260 #  define CONFIG_SYS_I2C_SPEED 50000
 261 # endif
 262 # ifndef CONFIG_SYS_I2C_SLAVE
 263 #  define CONFIG_SYS_I2C_SLAVE 0
 264 # endif
 265 #endif
 266
 267 /*
 268  * Misc Settings
 269  */
 270 #define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */
 271 #define CONFIG_LZMA
 272
 273 #endif