include/configs/bfin_adi_common.h

   1 /*
   2  * U-Boot - Common settings for Analog Devices boards
   3  */
   4
   5 #ifndef __CONFIG_BFIN_ADI_COMMON_H__
   6 #define __CONFIG_BFIN_ADI_COMMON_H__
   7
   8 /*
   9  * Command Settings
  10  */
  11 #ifndef _CONFIG_CMD_DEFAULT_H
  12 # include <config_cmd_default.h>
  13 # if ADI_CMDS_NETWORK
  14 #  define CONFIG_CMD_DHCP
  15 #  define CONFIG_BOOTP_SUBNETMASK
  16 #  define CONFIG_BOOTP_GATEWAY
  17 #  define CONFIG_BOOTP_DNS
  18 #  define CONFIG_BOOTP_NTPSERVER
  19 #  define CONFIG_BOOTP_RANDOM_DELAY
  20 #  define CONFIG_KEEP_SERVERADDR
  21 #  define CONFIG_CMD_DNS
  22 #  define CONFIG_CMD_PING
  23 #  ifdef CONFIG_BFIN_MAC
  24 #   define CONFIG_CMD_MII
  25 #  endif
  26 # else
  27 #  undef CONFIG_CMD_BOOTD
  28 #  undef CONFIG_CMD_NET
  29 #  undef CONFIG_CMD_NFS
  30 # endif
  31 # ifdef CONFIG_LIBATA
  32 #  define CONFIG_CMD_FAT
  33 #  define CONFIG_CMD_SATA
  34 #  define CONFIG_DOS_PARTITION
  35 # endif
  36 # ifdef CONFIG_MMC
  37 #  define CONFIG_CMD_FAT
  38 #  define CONFIG_CMD_MMC
  39 #  define CONFIG_DOS_PARTITION
  40 # endif
  41 # ifdef CONFIG_USB
  42 #  define CONFIG_CMD_EXT2
  43 #  define CONFIG_CMD_FAT
  44 #  define CONFIG_CMD_USB
  45 #  define CONFIG_CMD_USB_STORAGE
  46 #  define CONFIG_DOS_PARTITION
  47 # endif
  48 # if defined(CONFIG_NAND_PLAT) || defined(CONFIG_DRIVER_NAND_BFIN)
  49 #  define CONFIG_CMD_NAND
  50 # endif
  51 # ifdef CONFIG_POST
  52 #  define CONFIG_CMD_DIAG
  53 #  define CONFIG_POST_ALT_LIST
  54 # endif
  55 # ifdef CONFIG_RTC_BFIN
  56 #  define CONFIG_CMD_DATE
  57 #  if ADI_CMDS_NETWORK
  58 #   define CONFIG_CMD_SNTP
  59 #  endif
  60 # endif
  61 # ifdef CONFIG_SPI
  62 #  define CONFIG_CMD_EEPROM
  63 # endif
  64 # if defined(CONFIG_BFIN_SPI) || defined(CONFIG_SOFT_SPI)
  65 #  define CONFIG_CMD_SPI
  66 # endif
  67 # ifdef CONFIG_SPI_FLASH
  68 #  define CONFIG_CMD_SF
  69 # endif
  70 # if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
  71 #  define CONFIG_CMD_I2C
  72 #  define CONFIG_SOFT_I2C_READ_REPEATED_START
  73 # endif
  74 # ifdef CONFIG_SYS_NO_FLASH
  75 #  undef CONFIG_CMD_FLASH
  76 #  undef CONFIG_CMD_IMLS
  77 # else
  78 #  define CONFIG_CMD_JFFS2
  79 # endif
  80 # ifdef CONFIG_CMD_JFFS2
  81 #  define CONFIG_JFFS2_SUMMARY
  82 # endif
  83 # define CONFIG_CMD_BOOTLDR
  84 # define CONFIG_CMD_CACHE
  85 # define CONFIG_CMD_CPLBINFO
  86 # define CONFIG_CMD_ELF
  87 # define CONFIG_ELF_SIMPLE_LOAD
  88 # define CONFIG_CMD_GPIO
  89 # define CONFIG_CMD_KGDB
  90 # define CONFIG_CMD_REGINFO
  91 # define CONFIG_CMD_STRINGS
  92 # if defined(__ADSPBF51x__) || defined(__ADSPBF52x__) || defined(__ADSPBF54x__)
  93 #  define CONFIG_CMD_OTP
  94 #  define CONFIG_CMD_SPIBOOTLDR
  95 # endif
  96 #endif
  97
  98 /*
  99  * Console Settings
 100  */
 101 #define CONFIG_SYS_LONGHELP     1
 102 #define CONFIG_CMDLINE_EDITING  1
 103 #define CONFIG_AUTO_COMPLETE    1
 104 #define CONFIG_LOADS_ECHO       1
 105 #define CONFIG_JTAG_CONSOLE
 106 #define CONFIG_SILENT_CONSOLE
 107 #ifndef CONFIG_BAUDRATE
 108 # define CONFIG_BAUDRATE        57600
 109 #endif
 110
 111 /*
 112  * Debug Settings
 113  */
 114 #define CONFIG_ENV_OVERWRITE    1
 115 #define CONFIG_DEBUG_DUMP       1
 116 #define CONFIG_KALLSYMS         1
 117 #define CONFIG_PANIC_HANG       1
 118
 119 /*
 120  * Env Settings
 121  */
 122 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
 123 # define CONFIG_BOOTDELAY       -1
 124 #else
 125 # define CONFIG_BOOTDELAY       5
 126 #endif
 127 #ifndef CONFIG_BOOTCOMMAND
 128 # define CONFIG_BOOTCOMMAND     "run ramboot"
 129 #endif
 130 #ifdef CONFIG_VIDEO
 131 # define CONFIG_BOOTARGS_VIDEO "console=tty0 "
 132 #else
 133 # define CONFIG_BOOTARGS_VIDEO ""
 134 #endif
 135 #ifndef CONFIG_BOOTARGS_ROOT
 136 # define CONFIG_BOOTARGS_ROOT "/dev/mtdblock0 rw"
 137 #endif
 138 #ifndef FLASHBOOT_ENV_SETTINGS
 139 # define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20100000\0"
 140 #endif
 141 #define CONFIG_BOOTARGS \
 142         "root=" CONFIG_BOOTARGS_ROOT " " \
 143         "clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \
 144         "earlyprintk=" \
 145                 "serial," \
 146                 "uart" MK_STR(CONFIG_UART_CONSOLE) "," \
 147                 MK_STR(CONFIG_BAUDRATE) " " \
 148         CONFIG_BOOTARGS_VIDEO \
 149         "console=ttyBF" MK_STR(CONFIG_UART_CONSOLE) "," MK_STR(CONFIG_BAUDRATE)
 150 #if defined(CONFIG_CMD_NAND)
 151 # define NAND_ENV_SETTINGS \
 152         "nandargs=set bootargs " CONFIG_BOOTARGS "\0" \
 153         "nandboot=" \
 154                 "nand read $(loadaddr) 0x20000 0x100000;" \
 155                 "run nandargs;" \
 156                 "bootm" \
 157                 "\0"
 158 #else
 159 # define NAND_ENV_SETTINGS
 160 #endif
 161 #if defined(CONFIG_CMD_NET)
 162 # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 163 #  define UBOOT_ENV_FILE "u-boot.bin"
 164 # else
 165 #  define UBOOT_ENV_FILE "u-boot.ldr"
 166 # endif
 167 # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
 168 #  ifdef CONFIG_SPI
 169 #   define UBOOT_ENV_UPDATE \
 170                 "eeprom write $(loadaddr) 0x0 $(filesize)"
 171 #  else
 172 #   define UBOOT_ENV_UPDATE \
 173                 "sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
 174                 "sf erase 0 0x40000;" \
 175                 "sf write $(loadaddr) 0 $(filesize)"
 176 #  endif
 177 # elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
 178 #  define UBOOT_ENV_UPDATE \
 179                 "nand unlock 0 0x40000;" \
 180                 "nand erase 0 0x40000;" \
 181                 "nand write $(loadaddr) 0 0x40000"
 182 # else
 183 #  define UBOOT_ENV_UPDATE \
 184                 "protect off 0x20000000 +$(filesize);" \
 185                 "erase 0x20000000 +$(filesize);" \
 186                 "cp.b $(loadaddr) 0x20000000 $(filesize)"
 187 # endif
 188 # ifdef CONFIG_NETCONSOLE
 189 #  define NETCONSOLE_ENV \
 190         "nc=" \
 191                 "set ncip ${serverip};" \
 192                 "set stdin nc;" \
 193                 "set stdout nc" \
 194                 "\0"
 195 # else
 196 #  define NETCONSOLE_ENV
 197 # endif
 198 # define NETWORK_ENV_SETTINGS \
 199         NETCONSOLE_ENV \
 200         \
 201         "ubootfile=" UBOOT_ENV_FILE "\0" \
 202         "update=" \
 203                 "tftp $(loadaddr) $(ubootfile);" \
 204                 UBOOT_ENV_UPDATE \
 205                 "\0" \
 206         "addip=set bootargs $(bootargs) " \
 207                 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \
 208                    "$(hostname):eth0:off" \
 209                 "\0" \
 210         \
 211         "ramfile=uImage\0" \
 212         "ramargs=set bootargs " CONFIG_BOOTARGS "\0" \
 213         "ramboot=" \
 214                 "tftp $(loadaddr) $(ramfile);" \
 215                 "run ramargs;" \
 216                 "run addip;" \
 217                 "bootm" \
 218                 "\0" \
 219         \
 220         "nfsfile=vmImage\0" \
 221         "nfsargs=set bootargs " \
 222                 "root=/dev/nfs rw " \
 223                 "nfsroot=$(serverip):$(rootpath),tcp,nfsvers=3" \
 224                 "\0" \
 225         "nfsboot=" \
 226                 "tftp $(loadaddr) $(nfsfile);" \
 227                 "run nfsargs;" \
 228                 "run addip;" \
 229                 "bootm" \
 230                 "\0"
 231 #else
 232 # define NETWORK_ENV_SETTINGS
 233 #endif
 234 #define CONFIG_EXTRA_ENV_SETTINGS \
 235         NAND_ENV_SETTINGS \
 236         NETWORK_ENV_SETTINGS \
 237         FLASHBOOT_ENV_SETTINGS
 238
 239 /*
 240  * Network Settings
 241  */
 242 #ifdef CONFIG_CMD_NET
 243 # define CONFIG_IPADDR          192.168.0.15
 244 # define CONFIG_NETMASK         255.255.255.0
 245 # define CONFIG_GATEWAYIP       192.168.0.1
 246 # define CONFIG_SERVERIP        192.168.0.2
 247 # define CONFIG_ROOTPATH        /romfs
 248 # ifdef CONFIG_CMD_DHCP
 249 #  ifndef CONFIG_SYS_AUTOLOAD
 250 #   define CONFIG_SYS_AUTOLOAD "no"
 251 #  endif
 252 # endif
 253 # define CONFIG_IP_DEFRAG
 254 # define CONFIG_NET_RETRY_COUNT 20
 255 #endif
 256
 257 /*
 258  * I2C Settings
 259  */
 260 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
 261 # ifndef CONFIG_SYS_I2C_SPEED
 262 #  define CONFIG_SYS_I2C_SPEED 50000
 263 # endif
 264 # ifndef CONFIG_SYS_I2C_SLAVE
 265 #  define CONFIG_SYS_I2C_SLAVE 0
 266 # endif
 267 #endif
 268
 269 /*
 270  * Misc Settings
 271  */
 272 #define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */
 273 #define CONFIG_LZMA
 274
 275 #endif