include/configs/cm-bf548.h

   1 /*
   2  * U-boot - Configuration file for cm-bf548 board
   3  */
   4
   5 #ifndef __CONFIG_CM_BF548_H__
   6 #define __CONFIG_CM_BF548_H__
   7
   8 #include <asm/config-pre.h>
   9
  10
  11 /*
  12  * Processor Settings
  13  */
  14 #define CONFIG_BFIN_CPU             bf548-0.0
  15 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
  16
  17
  18 /*
  19  * Clock Settings
  20  *      CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
  21  *      SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
  22  */
  23 /* CONFIG_CLKIN_HZ is any value in Hz                                   */
  24 #define CONFIG_CLKIN_HZ                 25000000
  25 /* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN             */
  26 /*                                                1 = CLKIN / 2         */
  27 #define CONFIG_CLKIN_HALF               0
  28 /* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass     */
  29 /*                                                1 = bypass PLL        */
  30 #define CONFIG_PLL_BYPASS               0
  31 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL              */
  32 /* Values can range from 0-63 (where 0 means 64)                        */
  33 #define CONFIG_VCO_MULT                 21
  34 /* CCLK_DIV controls the core clock divider                             */
  35 /* Values can be 1, 2, 4, or 8 ONLY                                     */
  36 #define CONFIG_CCLK_DIV                 1
  37 /* SCLK_DIV controls the system clock divider                           */
  38 /* Values can range from 1-15                                           */
  39 #define CONFIG_SCLK_DIV                 4
  40
  41 /* Decrease core voltage */
  42 #define CONFIG_VR_CTL_VAL (VLEV_115 | GAIN_20 | FREQ_1000)
  43
  44
  45 /*
  46  * Memory Settings
  47  */
  48 #define CONFIG_MEM_ADD_WDTH     10
  49 #define CONFIG_MEM_SIZE         64
  50
  51 #define CONFIG_EBIU_DDRCTL0_VAL 0x218A83FE
  52 #define CONFIG_EBIU_DDRCTL1_VAL 0x20022222
  53 #define CONFIG_EBIU_DDRCTL2_VAL 0x00000021
  54
  55 /* Default bank mapping:
  56  *      Async Bank 0 - 32MB Burst Flash
  57  *      Async Bank 1 - Ethernet
  58  *      Async Bank 2 - Nothing
  59  *      Async Bank 3 - Nothing
  60  */
  61 #define CONFIG_EBIU_AMGCTL_VAL  0xFF
  62 #define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
  63 #define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
  64 #define CONFIG_EBIU_FCTL_VAL    (BCLK_4)
  65 #define CONFIG_EBIU_MODE_VAL    (B0MODE_FLASH)
  66
  67 #define CONFIG_SYS_MONITOR_LEN  (384 * 1024)
  68 #define CONFIG_SYS_MALLOC_LEN   (640 * 1024)
  69
  70
  71 /*
  72  * Network Settings
  73  */
  74 #define ADI_CMDS_NETWORK        1
  75 #define CONFIG_NET_MULTI
  76 #define CONFIG_SMC911X  1
  77 #define CONFIG_SMC911X_BASE     0x24000000
  78 #define CONFIG_SMC911X_16_BIT
  79 #define CONFIG_HOSTNAME         cm-bf548
  80 /* Uncomment next line to use fixed MAC address */
  81 /* #define CONFIG_ETHADDR       02:80:ad:24:31:91 */
  82
  83
  84 /*
  85  * Flash Settings
  86  */
  87 #define CONFIG_FLASH_CFI_DRIVER
  88 #define CONFIG_SYS_FLASH_BASE           0x20000000
  89 #define CONFIG_SYS_FLASH_CFI
  90 #define CONFIG_SYS_FLASH_PROTECTION
  91 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  92 #define CONFIG_SYS_MAX_FLASH_SECT       259
  93
  94
  95 /*
  96  * Env Storage Settings
  97  */
  98 #define CONFIG_ENV_IS_IN_FLASH  1
  99 #define CONFIG_ENV_ADDR         0x20008000
 100 #define CONFIG_ENV_OFFSET       0x8000
 101 #define CONFIG_ENV_SIZE         0x8000
 102 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 103
 104
 105 /*
 106  * I2C Settings
 107  */
 108 #define CONFIG_BFIN_TWI_I2C     1
 109 #define CONFIG_HARD_I2C         1
 110 #define CONFIG_SYS_I2C_SPEED    50000
 111 #define CONFIG_SYS_I2C_SLAVE    0
 112
 113
 114 /*
 115  * Misc Settings
 116  */
 117 #define CONFIG_BAUDRATE         115200
 118 #define CONFIG_BOARD_EARLY_INIT_F
 119 #define CONFIG_RTC_BFIN
 120 #define CONFIG_UART_CONSOLE     1
 121 #define CONFIG_BOOTCOMMAND      "run flashboot"
 122 #define FLASHBOOT_ENV_SETTINGS  "flashboot=bootm 0x20040000\0"
 123
 124 #ifndef __ADSPBF542__
 125 /* Don't waste time transferring a logo over the UART */
 126 # if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
 127 #  define CONFIG_VIDEO
 128 # endif
 129 # define CONFIG_DEB_DMA_URGENT
 130 #endif
 131
 132 /* Define if want to do post memory test */
 133 #undef CONFIG_POST
 134 #ifdef CONFIG_POST
 135 #define FLASH_START_POST_BLOCK 11       /* Should > = 11 */
 136 #define FLASH_END_POST_BLOCK   71       /* Should < = 71 */
 137 #endif
 138
 139
 140 /*
 141  * Pull in common ADI header for remaining command/environment setup
 142  */
 143 #include <configs/bfin_adi_common.h>
 144
 145 #endif