include/configs/cm_t35.h

   1 /*
   2  * (C) Copyright 2011 CompuLab, Ltd.
   3  * Mike Rapoport <mike@compulab.co.il>
   4  * Igor Grinberg <grinberg@compulab.co.il>
   5  *
   6  * Based on omap3_beagle.h
   7  * (C) Copyright 2006-2008
   8  * Texas Instruments.
   9  * Richard Woodruff <r-woodruff2@ti.com>
  10  * Syed Mohammed Khasim <x0khasim@ti.com>
  11  *
  12  * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards
  13  *
  14  * SPDX-License-Identifier:     GPL-2.0+
  15  */
  16
  17 #ifndef __CONFIG_H
  18 #define __CONFIG_H
  19
  20 #define CONFIG_SYS_CACHELINE_SIZE       64
  21
  22 /*
  23  * High Level Configuration Options
  24  */
  25 #define CONFIG_CM_T3X   /* working with CM-T35 and CM-T3730 */
  26
  27 #include <asm/arch/cpu.h>               /* get chip and board defs */
  28 #include <asm/arch/omap.h>
  29
  30 /* Clock Defines */
  31 #define V_OSCK                  26000000        /* Clock output from T2 */
  32 #define V_SCLK                  (V_OSCK >> 1)
  33
  34 #define CONFIG_MISC_INIT_R
  35
  36 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  37 #define CONFIG_SETUP_MEMORY_TAGS
  38 #define CONFIG_INITRD_TAG
  39 #define CONFIG_REVISION_TAG
  40 #define CONFIG_SERIAL_TAG
  41
  42 /*
  43  * Size of malloc() pool
  44  */
  45 #define CONFIG_ENV_SIZE         (16 << 10)      /* 16 KiB */
  46                                         /* Sector */
  47 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + (128 << 10))
  48
  49 /*
  50  * Hardware drivers
  51  */
  52
  53 /*
  54  * NS16550 Configuration
  55  */
  56 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  57
  58 #define CONFIG_SYS_NS16550_SERIAL
  59 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  60 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  61
  62 /*
  63  * select serial console configuration
  64  */
  65 #define CONFIG_CONS_INDEX               3
  66 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  67 #define CONFIG_SERIAL3                  3       /* UART3 */
  68
  69 /* allow to overwrite serial and ethaddr */
  70 #define CONFIG_ENV_OVERWRITE
  71 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  72                                         115200}
  73
  74 /* USB device configuration */
  75 #define CONFIG_USB_DEVICE
  76 #define CONFIG_USB_TTY
  77
  78 /* commands to include */
  79 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  80 #define CONFIG_MTD_PARTITIONS
  81
  82 #define CONFIG_SYS_I2C
  83 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
  84 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
  85 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
  86 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
  87 #define CONFIG_SYS_I2C_EEPROM_BUS       0
  88 #define CONFIG_I2C_MULTI_BUS
  89
  90 /*
  91  * TWL4030
  92  */
  93 #define CONFIG_TWL4030_LED
  94
  95 /*
  96  * Board NAND Info.
  97  */
  98 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
  99                                                         /* to access nand */
 100 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 101                                                         /* to access nand at */
 102                                                         /* CS0 */
 103 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND */
 104                                                         /* devices */
 105
 106 /* Environment information */
 107 #define CONFIG_EXTRA_ENV_SETTINGS \
 108         "loadaddr=0x82000000\0" \
 109         "usbtty=cdc_acm\0" \
 110         "console=ttyO2,115200n8\0" \
 111         "mpurate=500\0" \
 112         "vram=12M\0" \
 113         "dvimode=1024x768MR-16@60\0" \
 114         "defaultdisplay=dvi\0" \
 115         "mmcdev=0\0" \
 116         "mmcroot=/dev/mmcblk0p2 rw\0" \
 117         "mmcrootfstype=ext4 rootwait\0" \
 118         "nandroot=/dev/mtdblock4 rw\0" \
 119         "nandrootfstype=ubifs\0" \
 120         "mmcargs=setenv bootargs console=${console} " \
 121                 "mpurate=${mpurate} " \
 122                 "vram=${vram} " \
 123                 "omapfb.mode=dvi:${dvimode} " \
 124                 "omapdss.def_disp=${defaultdisplay} " \
 125                 "root=${mmcroot} " \
 126                 "rootfstype=${mmcrootfstype}\0" \
 127         "nandargs=setenv bootargs console=${console} " \
 128                 "mpurate=${mpurate} " \
 129                 "vram=${vram} " \
 130                 "omapfb.mode=dvi:${dvimode} " \
 131                 "omapdss.def_disp=${defaultdisplay} " \
 132                 "root=${nandroot} " \
 133                 "rootfstype=${nandrootfstype}\0" \
 134         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 135         "bootscript=echo Running bootscript from mmc ...; " \
 136                 "source ${loadaddr}\0" \
 137         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 138         "mmcboot=echo Booting from mmc ...; " \
 139                 "run mmcargs; " \
 140                 "bootm ${loadaddr}\0" \
 141         "nandboot=echo Booting from nand ...; " \
 142                 "run nandargs; " \
 143                 "nand read ${loadaddr} 2a0000 400000; " \
 144                 "bootm ${loadaddr}\0" \
 145
 146 #define CONFIG_BOOTCOMMAND \
 147         "mmc dev ${mmcdev}; if mmc rescan; then " \
 148                 "if run loadbootscript; then " \
 149                         "run bootscript; " \
 150                 "else " \
 151                         "if run loaduimage; then " \
 152                                 "run mmcboot; " \
 153                         "else run nandboot; " \
 154                         "fi; " \
 155                 "fi; " \
 156         "else run nandboot; fi"
 157
 158 /*
 159  * Miscellaneous configurable options
 160  */
 161 #define CONFIG_AUTO_COMPLETE
 162 #define CONFIG_CMDLINE_EDITING
 163 #define CONFIG_TIMESTAMP
 164 #define CONFIG_SYS_AUTOLOAD             "no"
 165 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 166
 167 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)     /* memtest */
 168                                                                 /* works on */
 169 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 170                                         0x01F00000) /* 31MB */
 171
 172 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0)     /* default */
 173                                                         /* load address */
 174
 175 /*
 176  * OMAP3 has 12 GP timers, they can be driven by the system clock
 177  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 178  * This rate is divided by a local divisor.
 179  */
 180 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 181 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 182
 183 /*-----------------------------------------------------------------------
 184  * Physical Memory Map
 185  */
 186 #define CONFIG_NR_DRAM_BANKS    1       /* CS1 is never populated */
 187 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 188
 189 /*-----------------------------------------------------------------------
 190  * FLASH and environment organization
 191  */
 192
 193 /* **** PISMO SUPPORT *** */
 194 /* Monitor at start of flash */
 195 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 196 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 197
 198 #define CONFIG_ENV_OFFSET               0x260000
 199 #define CONFIG_ENV_ADDR                 0x260000
 200
 201 /* additions for new relocation code, must be added to all boards */
 202 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 203 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 204 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 205 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR +     \
 206                                          CONFIG_SYS_INIT_RAM_SIZE -     \
 207                                          GENERATED_GBL_DATA_SIZE)
 208
 209 /* Status LED */
 210 #define GREEN_LED_GPIO                  186 /* CM-T35 Green LED is GPIO186 */
 211
 212 #define CONFIG_SPLASHIMAGE_GUARD
 213
 214 /* Display Configuration */
 215 #define CONFIG_VIDEO_OMAP3
 216 #define LCD_BPP         LCD_COLOR16
 217
 218 #define CONFIG_SPLASH_SCREEN
 219 #define CONFIG_SPLASH_SOURCE
 220 #define CONFIG_BMP_16BPP
 221 #define CONFIG_SCF0403_LCD
 222
 223 /* Defines for SPL */
 224 #define CONFIG_SPL_FRAMEWORK
 225
 226 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 227 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
 228
 229 #define CONFIG_SPL_NAND_BASE
 230 #define CONFIG_SPL_NAND_DRIVERS
 231 #define CONFIG_SPL_NAND_ECC
 232
 233 /* NAND boot config */
 234 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 235 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 236 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 237 #define CONFIG_SYS_NAND_OOBSIZE         64
 238 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 239 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 240 /*
 241  * Use the ECC/OOB layout from omap_gpmc.h that matches your chip:
 242  * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT
 243  */
 244 #define CONFIG_SYS_NAND_ECCPOS          { 1, 2, 3, 4, 5, 6, 7, 8, 9, \
 245                                          10, 11, 12 }
 246 #define CONFIG_SYS_NAND_ECCSIZE         512
 247 #define CONFIG_SYS_NAND_ECCBYTES        3
 248 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 249
 250 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 251 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 252
 253 #define CONFIG_SPL_TEXT_BASE            0x40200800
 254 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
 255                                          CONFIG_SPL_TEXT_BASE)
 256
 257 /*
 258  * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
 259  * older x-loader implementations. And move the BSS area so that it
 260  * doesn't overlap with TEXT_BASE.
 261  */
 262 #define CONFIG_SYS_TEXT_BASE            0x80008000
 263 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 264 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 265
 266 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 267 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 268
 269 /* EEPROM */
 270 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 271 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 272 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4
 273 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 274 #define CONFIG_SYS_EEPROM_SIZE                  256
 275
 276 #endif /* __CONFIG_H */