include/configs/cm_t3517.h

   1 /*
   2  * (C) Copyright 2013 CompuLab, Ltd.
   3  * Author: Igor Grinberg <grinberg@compulab.co.il>
   4  *
   5  * Configuration settings for the CompuLab CM-T3517 board
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /*
  14  * High Level Configuration Options
  15  */
  16 #define CONFIG_OMAP     /* in a TI OMAP core */
  17 #define CONFIG_CM_T3517 /* working with CM-T3517 */
  18 #define CONFIG_OMAP_COMMON
  19 #define CONFIG_SYS_GENERIC_BOARD
  20 /* Common ARM Erratas */
  21 #define CONFIG_ARM_ERRATA_454179
  22 #define CONFIG_ARM_ERRATA_430973
  23 #define CONFIG_ARM_ERRATA_621766
  24
  25 #define CONFIG_SYS_TEXT_BASE    0x80008000
  26
  27 /*
  28  * This is needed for the DMA stuff.
  29  * Although the default iss 64, we still define it
  30  * to be on the safe side once the default is changed.
  31  */
  32 #define CONFIG_SYS_CACHELINE_SIZE       64
  33
  34 #define CONFIG_EMIF4    /* The chip has EMIF4 controller */
  35
  36 #include <asm/arch/cpu.h>               /* get chip and board defs */
  37 #include <asm/arch/omap.h>
  38
  39 /*
  40  * Display CPU and Board information
  41  */
  42 #define CONFIG_DISPLAY_CPUINFO
  43 #define CONFIG_DISPLAY_BOARDINFO
  44
  45 /* Clock Defines */
  46 #define V_OSCK                  26000000        /* Clock output from T2 */
  47 #define V_SCLK                  (V_OSCK >> 1)
  48
  49 #define CONFIG_MISC_INIT_R
  50
  51 #define CONFIG_OF_LIBFDT
  52 /*
  53  * The early kernel mapping on ARM currently only maps from the base of DRAM
  54  * to the end of the kernel image.  The kernel is loaded at DRAM base + 0x8000.
  55  * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
  56  * so that leaves DRAM base to DRAM base + 0x4000 available.
  57  */
  58 #define CONFIG_SYS_BOOTMAPSZ            0x4000
  59
  60 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  61 #define CONFIG_SETUP_MEMORY_TAGS
  62 #define CONFIG_INITRD_TAG
  63 #define CONFIG_REVISION_TAG
  64 #define CONFIG_SERIAL_TAG
  65
  66 /*
  67  * Size of malloc() pool
  68  */
  69 #define CONFIG_ENV_SIZE         (16 << 10)      /* 16 KiB */
  70 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + (128 << 10))
  71
  72 /*
  73  * Hardware drivers
  74  */
  75
  76 /*
  77  * NS16550 Configuration
  78  */
  79 #define CONFIG_SYS_NS16550
  80 #define CONFIG_SYS_NS16550_SERIAL
  81 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  82 #define CONFIG_SYS_NS16550_CLK          48000000        /* 48MHz (APLL96/2) */
  83
  84 /*
  85  * select serial console configuration
  86  */
  87 #define CONFIG_CONS_INDEX               3
  88 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  89 #define CONFIG_SERIAL3                  3       /* UART3 */
  90 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  91
  92 /* allow to overwrite serial and ethaddr */
  93 #define CONFIG_ENV_OVERWRITE
  94 #define CONFIG_BAUDRATE                 115200
  95 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  96                                         115200}
  97
  98 #define CONFIG_OMAP_GPIO
  99
 100 #define CONFIG_GENERIC_MMC
 101 #define CONFIG_MMC
 102 #define CONFIG_OMAP_HSMMC
 103 #define CONFIG_DOS_PARTITION
 104
 105 /* USB */
 106 #define CONFIG_USB_MUSB_AM35X
 107
 108 #ifndef CONFIG_USB_MUSB_AM35X
 109 #define CONFIG_USB_OMAP3
 110 #define CONFIG_USB_EHCI
 111 #define CONFIG_USB_EHCI_OMAP
 112 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146
 113 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147
 114 #else /* !CONFIG_USB_MUSB_AM35X */
 115 #define CONFIG_MUSB_HOST
 116 #define CONFIG_MUSB_PIO_ONLY
 117 #endif /* CONFIG_USB_MUSB_AM35X */
 118
 119 #define CONFIG_USB_STORAGE
 120 #define CONFIG_CMD_USB
 121
 122 /* commands to include */
 123 #define CONFIG_CMD_CACHE
 124 #define CONFIG_CMD_EXT2         /* EXT2 Support                 */
 125 #define CONFIG_CMD_FAT          /* FAT support                  */
 126 #define CONFIG_CMD_MTDPARTS     /* Enable MTD parts commands */
 127 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
 128 #define CONFIG_MTD_PARTITIONS
 129 #define MTDIDS_DEFAULT          "nand0=nand"
 130 #define MTDPARTS_DEFAULT        "mtdparts=nand:512k(x-loader),"\
 131                                 "1920k(u-boot),256k(u-boot-env),"\
 132                                 "4m(kernel),-(fs)"
 133
 134 #define CONFIG_CMD_I2C          /* I2C serial bus support       */
 135 #define CONFIG_CMD_MMC          /* MMC support                  */
 136 #define CONFIG_CMD_NAND         /* NAND support                 */
 137 #define CONFIG_CMD_DHCP
 138 #define CONFIG_CMD_PING
 139 #define CONFIG_CMD_GPIO
 140
 141
 142 #define CONFIG_SYS_NO_FLASH
 143 #define CONFIG_SYS_I2C
 144 #define CONFIG_SYS_OMAP24_I2C_SPEED     400000
 145 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 146 #define CONFIG_SYS_I2C_OMAP34XX
 147 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 148 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 149 #define CONFIG_SYS_I2C_EEPROM_BUS       0
 150 #define CONFIG_I2C_MULTI_BUS
 151
 152 /*
 153  * Board NAND Info.
 154  */
 155 #define CONFIG_SYS_NAND_QUIET_TEST
 156 #define CONFIG_NAND_OMAP_GPMC
 157 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 158                                                         /* to access nand */
 159 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 160                                                         /* to access nand at */
 161                                                         /* CS0 */
 162 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND */
 163                                                         /* devices */
 164
 165 /* Environment information */
 166 #define CONFIG_BOOTDELAY                3
 167 #define CONFIG_ZERO_BOOTDELAY_CHECK
 168
 169 #define CONFIG_EXTRA_ENV_SETTINGS \
 170         "loadaddr=0x82000000\0" \
 171         "baudrate=115200\0" \
 172         "console=ttyO2,115200n8\0" \
 173         "mpurate=auto\0" \
 174         "vram=12M\0" \
 175         "dvimode=1024x768MR-16@60\0" \
 176         "defaultdisplay=dvi\0" \
 177         "mmcdev=0\0" \
 178         "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
 179         "mmcrootfstype=ext4\0" \
 180         "nandroot=/dev/mtdblock4 rw\0" \
 181         "nandrootfstype=ubifs\0" \
 182         "mmcargs=setenv bootargs console=${console} " \
 183                 "mpurate=${mpurate} " \
 184                 "vram=${vram} " \
 185                 "omapfb.mode=dvi:${dvimode} " \
 186                 "omapdss.def_disp=${defaultdisplay} " \
 187                 "root=${mmcroot} " \
 188                 "rootfstype=${mmcrootfstype}\0" \
 189         "nandargs=setenv bootargs console=${console} " \
 190                 "mpurate=${mpurate} " \
 191                 "vram=${vram} " \
 192                 "omapfb.mode=dvi:${dvimode} " \
 193                 "omapdss.def_disp=${defaultdisplay} " \
 194                 "root=${nandroot} " \
 195                 "rootfstype=${nandrootfstype}\0" \
 196         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 197         "bootscript=echo Running bootscript from mmc ...; " \
 198                 "source ${loadaddr}\0" \
 199         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 200         "mmcboot=echo Booting from mmc ...; " \
 201                 "run mmcargs; " \
 202                 "bootm ${loadaddr}\0" \
 203         "nandboot=echo Booting from nand ...; " \
 204                 "run nandargs; " \
 205                 "nand read ${loadaddr} 2a0000 400000; " \
 206                 "bootm ${loadaddr}\0" \
 207
 208 #define CONFIG_CMD_BOOTZ
 209 #define CONFIG_BOOTCOMMAND \
 210         "mmc dev ${mmcdev}; if mmc rescan; then " \
 211                 "if run loadbootscript; then " \
 212                         "run bootscript; " \
 213                 "else " \
 214                         "if run loaduimage; then " \
 215                                 "run mmcboot; " \
 216                         "else run nandboot; " \
 217                         "fi; " \
 218                 "fi; " \
 219         "else run nandboot; fi"
 220
 221 /*
 222  * Miscellaneous configurable options
 223  */
 224 #define CONFIG_AUTO_COMPLETE
 225 #define CONFIG_CMDLINE_EDITING
 226 #define CONFIG_TIMESTAMP
 227 #define CONFIG_SYS_AUTOLOAD             "no"
 228 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 229 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 230 #define CONFIG_SYS_PROMPT               "CM-T3517 # "
 231 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 232 /* Print Buffer Size */
 233 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 234                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 235 #define CONFIG_SYS_MAXARGS              32      /* max number of command args */
 236 /* Boot Argument Buffer Size */
 237 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 238
 239 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0 + 0x02000000)
 240
 241 /*
 242  * AM3517 has 12 GP timers, they can be driven by the system clock
 243  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 244  * This rate is divided by a local divisor.
 245  */
 246 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 247 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 248 #define CONFIG_SYS_HZ                   1000
 249
 250 /*-----------------------------------------------------------------------
 251  * Physical Memory Map
 252  */
 253 #define CONFIG_NR_DRAM_BANKS    1       /* CM-T3517 DRAM is only on CS0 */
 254 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 255 #define CONFIG_SYS_CS0_SIZE             (256 << 20)
 256
 257 /*-----------------------------------------------------------------------
 258  * FLASH and environment organization
 259  */
 260
 261 /* **** PISMO SUPPORT *** */
 262 /* Monitor at start of flash */
 263 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 264 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 265
 266 #define CONFIG_ENV_IS_IN_NAND
 267 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 268 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 269 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 270
 271 #if defined(CONFIG_CMD_NET)
 272 #define CONFIG_DRIVER_TI_EMAC
 273 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
 274 #define CONFIG_MII
 275 #define CONFIG_SMC911X
 276 #define CONFIG_SMC911X_32_BIT
 277 #define CONFIG_SMC911X_BASE     (0x2C000000 + (16 << 20))
 278 #endif /* CONFIG_CMD_NET */
 279
 280 /* additions for new relocation code, must be added to all boards */
 281 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 282 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 283 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 284 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR +     \
 285                                          CONFIG_SYS_INIT_RAM_SIZE -     \
 286                                          GENERATED_GBL_DATA_SIZE)
 287
 288 /* Status LED */
 289 #define CONFIG_STATUS_LED               /* Status LED enabled */
 290 #define CONFIG_BOARD_SPECIFIC_LED
 291 #define CONFIG_GPIO_LED
 292 #define GREEN_LED_GPIO                  186 /* CM-T3517 Green LED is GPIO186 */
 293 #define GREEN_LED_DEV                   0
 294 #define STATUS_LED_BIT                  GREEN_LED_GPIO
 295 #define STATUS_LED_STATE                STATUS_LED_ON
 296 #define STATUS_LED_PERIOD               (CONFIG_SYS_HZ / 2)
 297 #define STATUS_LED_BOOT                 GREEN_LED_DEV
 298
 299 /* GPIO banks */
 300 #ifdef CONFIG_STATUS_LED
 301 #define CONFIG_OMAP3_GPIO_6     /* GPIO186 is in GPIO bank 6  */
 302 #endif
 303
 304 /* Display Configuration */
 305 #define CONFIG_OMAP3_GPIO_2
 306 #define CONFIG_OMAP3_GPIO_5
 307 #define CONFIG_VIDEO_OMAP3
 308 #define LCD_BPP         LCD_COLOR16
 309
 310 #define CONFIG_LCD
 311 #define CONFIG_SPLASH_SCREEN
 312 #define CONFIG_SPLASHIMAGE_GUARD
 313 #define CONFIG_CMD_BMP
 314 #define CONFIG_BMP_16BPP
 315 #define CONFIG_SCF0403_LCD
 316
 317 #define CONFIG_OMAP3_SPI
 318
 319 #endif /* __CONFIG_H */