include/configs/cmi_mpc5xx.h

   1 /*
   2  * (C) Copyright 2003
   3  * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation,
  21  */
  22
  23 /*
  24  * File:                cmi_mpc5xx.h
  25  *
  26  * Discription:         Config header file for cmi
  27  *                      board  using an MPC5xx CPU
  28  *
  29  */
  30
  31 #ifndef __CONFIG_H
  32 #define __CONFIG_H
  33
  34 /*
  35  * High Level Configuration Options
  36  */
  37
  38 #define CONFIG_MPC555           1               /* This is an MPC555 CPU                */
  39 #define CONFIG_CMI              1               /* Using the customized cmi board       */
  40
  41 /* Serial Console Configuration */
  42 #define CONFIG_5xx_CONS_SCI1
  43 #undef  CONFIG_5xx_CONS_SCI2
  44
  45 #define CONFIG_BAUDRATE         57600
  46
  47
  48 /*
  49  * BOOTP options
  50  */
  51 #define CONFIG_BOOTP_BOOTFILESIZE
  52 #define CONFIG_BOOTP_BOOTPATH
  53 #define CONFIG_BOOTP_GATEWAY
  54 #define CONFIG_BOOTP_HOSTNAME
  55
  56
  57 /*
  58  * Command line configuration.
  59  */
  60 #include <config_cmd_default.h>
  61
  62 #define CONFIG_CMD_MEMORY
  63 #define CONFIG_CMD_LOADB
  64 #define CONFIG_CMD_REGINFO
  65 #define CONFIG_CMD_FLASH
  66 #define CONFIG_CMD_LOADS
  67 #define CONFIG_CMD_ASKENV
  68 #define CONFIG_CMD_BDI
  69 #define CONFIG_CMD_CONSOLE
  70 #define CONFIG_CMD_ENV
  71 #define CONFIG_CMD_RUN
  72 #define CONFIG_CMD_IMI
  73
  74
  75 #if 0
  76 #define CONFIG_BOOTDELAY        -1              /* autoboot disabled                    */
  77 #else
  78 #define CONFIG_BOOTDELAY        5               /* autoboot after 5 seconds             */
  79 #endif
  80 #define CONFIG_BOOTCOMMAND      "go 02034004"   /* autoboot command                     */
  81
  82 #define CONFIG_BOOTARGS         ""              /* Assuming OS Image in 4 flash sector at offset 4004 */
  83
  84 #define CONFIG_WATCHDOG                         /* turn on platform specific watchdog   */
  85
  86 #define CONFIG_STATUS_LED       1               /* Enable status led */
  87
  88 #define CONFIG_LOADS_ECHO       1               /* Echo on for serial download */
  89
  90 /*
  91  * Miscellaneous configurable options
  92  */
  93
  94 #define CFG_LONGHELP                            /* undef to save memory         */
  95 #define CFG_PROMPT              "=> "           /* Monitor Command Prompt       */
  96 #if defined(CONFIG_CMD_KGDB)
  97 #define CFG_CBSIZE              1024            /* Console I/O Buffer Size      */
  98 #else
  99 #define CFG_CBSIZE              256             /* Console I/O Buffer Size      */
 100 #endif
 101 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 102 #define CFG_MAXARGS             16             /* max number of command args    */
 103 #define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
 104
 105 #define CFG_MEMTEST_START       0x00000000      /* memtest works on             */
 106 #define CFG_MEMTEST_END         0x000fa000      /* 1 MB in SRAM                 */
 107
 108 #define CFG_LOAD_ADDR           0x100000        /* default load address         */
 109
 110 #define CFG_HZ                  1000            /* Decrementer freq: 1 ms ticks */
 111
 112 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 1250000 }
 113
 114
 115 /*
 116  * Low Level Configuration Settings
 117  */
 118
 119 /*
 120  * Internal Memory Mapped (This is not the IMMR content)
 121  */
 122 #define CFG_IMMR                0x01000000                              /* Physical start adress of internal memory map */
 123
 124 /*
 125  * Definitions for initial stack pointer and data area
 126  */
 127 #define CFG_INIT_RAM_ADDR       (CFG_IMMR + 0x003f9800)                 /* Physical start adress of internal MPC555 writable RAM */
 128 #define CFG_INIT_RAM_END        (CFG_IMMR + 0x003fffff)                 /* Physical end adress of internal MPC555 used RAM area */
 129 #define CFG_GBL_DATA_SIZE       64                                      /* Size in bytes reserved for initial global data */
 130 #define CFG_GBL_DATA_OFFSET     ((CFG_INIT_RAM_END - CFG_INIT_RAM_ADDR) - CFG_GBL_DATA_SIZE) /* Offset from the beginning of ram */
 131 #define CFG_INIT_SP_ADDR        0x013fa000                              /* Physical start adress of inital stack */
 132
 133 /*
 134  * Start addresses for the final memory configuration
 135  * Please note that CFG_SDRAM_BASE _must_ start at 0
 136  */
 137 #define CFG_SDRAM_BASE          0x00000000      /* Monitor won't change memory map                      */
 138 #define CFG_FLASH_BASE          0x02000000      /* External flash */
 139 #define PLD_BASE                0x03000000      /* PLD  */
 140 #define ANYBUS_BASE             0x03010000      /* Anybus Module */
 141
 142 #define CFG_RESET_ADRESS        0x01000000      /* Adress which causes reset */
 143 #define CFG_MONITOR_BASE        CFG_FLASH_BASE  /* TEXT_BASE is defined in the board config.mk file.    */
 144                                                 /* This adress is given to the linker with -Ttext to    */
 145                                                 /* locate the text section at this adress.              */
 146 #define CFG_MONITOR_LEN         (192 << 10)     /* Reserve 192 kB for Monitor                           */
 147 #define CFG_MALLOC_LEN          (64 << 10)      /* Reserve 128 kB for malloc()                          */
 148
 149 /*
 150  * For booting Linux, the board info and command line data
 151  * have to be in the first 8 MB of memory, since this is
 152  * the maximum mapped by the Linux kernel during initialization.
 153  */
 154 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux         */
 155
 156
 157 /*-----------------------------------------------------------------------
 158  * FLASH organization
 159  *-----------------------------------------------------------------------
 160  *
 161  */
 162
 163 #define CFG_MAX_FLASH_BANKS     1               /* Max number of memory banks           */
 164 #define CFG_MAX_FLASH_SECT      64              /* Max number of sectors on one chip    */
 165 #define CFG_FLASH_ERASE_TOUT    180000          /* Timeout for Flash Erase (in ms)      */
 166 #define CFG_FLASH_WRITE_TOUT    600             /* Timeout for Flash Write (in ms)      */
 167 #define CFG_FLASH_PROTECTION    1               /* Physically section protection on     */
 168
 169 #define CFG_ENV_IS_IN_FLASH     1
 170
 171 #ifdef  CFG_ENV_IS_IN_FLASH
 172 #define CFG_ENV_OFFSET          0x00020000              /* Environment starts at this adress    */
 173 #define CFG_ENV_SIZE            0x00010000              /* Set whole sector as env              */
 174 #endif
 175
 176 /*-----------------------------------------------------------------------
 177  * SYPCR - System Protection Control
 178  * SYPCR can only be written once after reset!
 179  *-----------------------------------------------------------------------
 180  * SW Watchdog freeze
 181  */
 182 #if defined(CONFIG_WATCHDOG)
 183 #define CFG_SYPCR       (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 184                          SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
 185 #else
 186 #define CFG_SYPCR       (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 187                          SYPCR_SWP)
 188 #endif  /* CONFIG_WATCHDOG */
 189
 190 /*-----------------------------------------------------------------------
 191  * TBSCR - Time Base Status and Control
 192  *-----------------------------------------------------------------------
 193  * Clear Reference Interrupt Status, Timebase freezing enabled
 194  */
 195 #define CFG_TBSCR       (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 196
 197 /*-----------------------------------------------------------------------
 198  * PISCR - Periodic Interrupt Status and Control
 199  *-----------------------------------------------------------------------
 200  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 201  */
 202 #define CFG_PISCR       (PISCR_PITF)
 203
 204 /*-----------------------------------------------------------------------
 205  * SCCR - System Clock and reset Control Register
 206  *-----------------------------------------------------------------------
 207  * Set clock output, timebase and RTC source and divider,
 208  * power management and some other internal clocks
 209  */
 210 #define SCCR_MASK       SCCR_EBDF00
 211 #define CFG_SCCR        (SCCR_TBS     | SCCR_RTDIV    | SCCR_RTSEL    | \
 212                          SCCR_COM00   | SCCR_DFNL000 | SCCR_DFNH000)
 213
 214 /*-----------------------------------------------------------------------
 215  * SIUMCR - SIU Module Configuration
 216  *-----------------------------------------------------------------------
 217  * Data show cycle
 218  */
 219 #define CFG_SIUMCR      (SIUMCR_DBGC00)         /* Disable data show cycle      */
 220
 221 /*-----------------------------------------------------------------------
 222  * PLPRCR - PLL, Low-Power, and Reset Control Register
 223  *-----------------------------------------------------------------------
 224  * Set all bits to 40 Mhz
 225  *
 226  */
 227 #define CFG_OSC_CLK     ((uint)4000000)         /* Oscillator clock is 4MHz     */
 228 #define CFG_PLPRCR      (PLPRCR_MF_9 | PLPRCR_DIVF_0)
 229
 230
 231 /*-----------------------------------------------------------------------
 232  * UMCR - UIMB Module Configuration Register
 233  *-----------------------------------------------------------------------
 234  *
 235  */
 236 #define CFG_UMCR        (UMCR_FSPEED)           /* IMB clock same as U-bus      */
 237
 238 /*-----------------------------------------------------------------------
 239  * ICTRL - I-Bus Support Control Register
 240  */
 241 #define CFG_ICTRL       (ICTRL_ISCT_SER_7)      /* Take out of serialized mode  */
 242
 243 /*-----------------------------------------------------------------------
 244  * USIU - Memory Controller Register
 245  *-----------------------------------------------------------------------
 246  */
 247
 248 #define CFG_BR0_PRELIM          (CFG_FLASH_BASE | BR_V | BR_BI | BR_PS_16)
 249 #define CFG_OR0_PRELIM          (OR_ADDR_MK_FF | OR_SCY_3)
 250 #define CFG_BR1_PRELIM          (ANYBUS_BASE)
 251 #define CFG_OR1_PRELIM          (OR_ADDR_MK_FFFF | OR_SCY_1 | OR_ETHR)
 252 #define CFG_BR2_PRELIM          (CFG_SDRAM_BASE | BR_V | BR_PS_32)
 253 #define CFG_OR2_PRELIM          (OR_ADDR_MK_FF)
 254 #define CFG_BR3_PRELIM          (PLD_BASE | BR_V | BR_BI | BR_LBDIR | BR_PS_8)
 255 #define CFG_OR3_PRELIM          (OR_ADDR_MK_FF | OR_TRLX | OR_BSCY | OR_SCY_8 | \
 256                                  OR_ACS_10 | OR_ETHR | OR_CSNT)
 257
 258 #define FLASH_BASE0_PRELIM      CFG_FLASH_BASE  /* We don't realign the flash   */
 259
 260 /*-----------------------------------------------------------------------
 261  * DER - Timer Decrementer
 262  *-----------------------------------------------------------------------
 263  * Initialise to zero
 264  */
 265 #define CFG_DER                 0x00000000
 266
 267
 268 /*
 269  * Internal Definitions
 270  *
 271  * Boot Flags
 272  */
 273 #define BOOTFLAG_COLD   0x01                    /* Normal Power-On: Boot from FLASH     */
 274 #define BOOTFLAG_WARM   0x02                    /* Software reboot                      */
 275
 276 #endif  /* __CONFIG_H */