include/configs/controlcenterd.h

   1 /*
   2  * (C) Copyright 2013
   3  * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
   4  *
   5  * based on P1022DS.h
   6  *
   7  * See file CREDITS for list of people who contributed to this
   8  * project.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26 #ifndef __CONFIG_H
  27 #define __CONFIG_H
  28
  29 #ifdef CONFIG_SDCARD
  30 #define CONFIG_RAMBOOT_SDCARD
  31 #endif
  32
  33 #ifdef CONFIG_SPIFLASH
  34 #define CONFIG_RAMBOOT_SPIFLASH
  35 #endif
  36
  37 /* High Level Configuration Options */
  38 #define CONFIG_CONTROLCENTERD
  39 #define CONFIG_MP                       /* support multiple processors */
  40
  41 #define CONFIG_SYS_NO_FLASH
  42 #define CONFIG_ENABLE_36BIT_PHYS
  43
  44 #ifdef CONFIG_PHYS_64BIT
  45 #define CONFIG_ADDR_MAP
  46 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
  47 #endif
  48
  49 #define CONFIG_L2_CACHE
  50 #define CONFIG_BTB
  51
  52 #define CONFIG_SYS_CLK_FREQ     66666600
  53 #define CONFIG_DDR_CLK_FREQ     66666600
  54
  55 #define CONFIG_SYS_RAMBOOT
  56
  57 #ifdef CONFIG_TRAILBLAZER
  58
  59 #define CONFIG_SYS_TEXT_BASE            0xf8fc0000
  60 #define CONFIG_RESET_VECTOR_ADDRESS     0xf8fffffc
  61 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)
  62
  63 /*
  64  * Config the L2 Cache
  65  */
  66 #define CONFIG_SYS_INIT_L2_ADDR         0xf8fc0000
  67 #ifdef CONFIG_PHYS_64BIT
  68 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    0xff8fc0000ull
  69 #else
  70 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
  71 #endif
  72 #define CONFIG_SYS_L2_SIZE              (256 << 10)
  73 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
  74
  75 #else /* CONFIG_TRAILBLAZER */
  76
  77 #define CONFIG_SYS_TEXT_BASE            0x11000000
  78 #define CONFIG_RESET_VECTOR_ADDRESS     0x1107fffc
  79 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
  80
  81 #endif /* CONFIG_TRAILBLAZER */
  82
  83 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
  84 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  85
  86 /*
  87  * Memory map
  88  *
  89  * 0x0000_0000  0x3fff_ffff     DDR                     1G Cacheable
  90  * 0xc000_0000  0xdfff_ffff     PCI Express Mem         512M non-cacheable
  91  * 0xffc0_0000  0xffc2_ffff     PCI IO range            192K non-cacheable
  92  *
  93  * Localbus non-cacheable
  94  * 0xe000_0000  0xe00f_ffff     eLBC                    1M non-cacheable
  95  * 0xf8fc0000   0xf8ff_ffff     L2 SRAM                 256k Cacheable
  96  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
  97  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
  98  */
  99
 100 #define CONFIG_SYS_INIT_RAM_LOCK
 101 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* Initial L1 address */
 102 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000 /* used area in RAM */
 103 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 104         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 105 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 106
 107 #ifdef CONFIG_TRAILBLAZER
 108 /* leave CCSRBAR at default, because u-boot expects it to be exactly there */
 109 #define CONFIG_SYS_CCSRBAR              CONFIG_SYS_CCSRBAR_DEFAULT
 110 #else
 111 #define CONFIG_SYS_CCSRBAR              0xffe00000
 112 #endif
 113 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 114 #define CONFIG_SYS_MPC85xx_GPIO3_ADDR   (CONFIG_SYS_CCSRBAR+0xf200)
 115
 116 /*
 117  * DDR Setup
 118  */
 119
 120 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 121 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 122 #define CONFIG_SYS_SDRAM_SIZE 1024
 123 #define CONFIG_VERY_BIG_RAM
 124
 125 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 126 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 127
 128 #define CONFIG_SYS_MEMTEST_START        0x00000000
 129 #define CONFIG_SYS_MEMTEST_END          0x3fffffff
 130
 131 #ifdef CONFIG_TRAILBLAZER
 132 #define CONFIG_SPD_EEPROM
 133 #define SPD_EEPROM_ADDRESS 0x52
 134 /*#define CONFIG_FSL_DDR_INTERACTIVE*/
 135 #endif
 136
 137 /*
 138  * Local Bus Definitions
 139  */
 140
 141 #define CONFIG_SYS_ELBC_BASE            0xe0000000
 142 #ifdef CONFIG_PHYS_64BIT
 143 #define CONFIG_SYS_ELBC_BASE_PHYS       0xfe0000000ull
 144 #else
 145 #define CONFIG_SYS_ELBC_BASE_PHYS       CONFIG_SYS_ELBC_BASE
 146 #endif
 147
 148 #define CONFIG_UART_BR_PRELIM  \
 149         (BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V)
 150 #define CONFIG_UART_OR_PRELIM   (OR_AM_32KB | 0xff7)
 151
 152 #define CONFIG_SYS_BR0_PRELIM   0 /* CS0 was originally intended for FPGA */
 153 #define CONFIG_SYS_OR0_PRELIM   0 /* debugging, was never used */
 154
 155 #define CONFIG_SYS_BR1_PRELIM   CONFIG_UART_BR_PRELIM
 156 #define CONFIG_SYS_OR1_PRELIM   CONFIG_UART_OR_PRELIM
 157
 158 /*
 159  * Serial Port
 160  */
 161 #define CONFIG_CONS_INDEX               2
 162 #define CONFIG_SYS_NS16550_SERIAL
 163 #define CONFIG_SYS_NS16550_REG_SIZE     1
 164 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 165
 166 #define CONFIG_SYS_BAUDRATE_TABLE       \
 167         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 168
 169 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 170 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 171
 172 /*
 173  * I2C
 174  */
 175 #define CONFIG_SYS_I2C
 176 #define CONFIG_SYS_I2C_FSL
 177 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 178 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 179 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 180 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 181 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 182 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 183
 184 #ifndef CONFIG_TRAILBLAZER
 185 #endif
 186
 187 #define CONFIG_PCA9698                  /* NXP PCA9698 */
 188
 189 #define CONFIG_CMD_EEPROM
 190 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
 191 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 192
 193 #ifndef CONFIG_TRAILBLAZER
 194 /*
 195  * eSPI - Enhanced SPI
 196  */
 197 #define CONFIG_HARD_SPI
 198
 199 #define CONFIG_SF_DEFAULT_SPEED         10000000
 200 #define CONFIG_SF_DEFAULT_MODE          0
 201 #endif
 202
 203 #define CONFIG_SHA1
 204
 205 /*
 206  * MMC
 207  */
 208 #define CONFIG_GENERIC_MMC
 209
 210 #define CONFIG_FSL_ESDHC
 211 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 212
 213 #ifndef CONFIG_TRAILBLAZER
 214
 215 /*
 216  * Video
 217  */
 218 #define CONFIG_FSL_DIU_FB
 219 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x10000)
 220 #define CONFIG_CMD_BMP
 221
 222 /*
 223  * General PCI
 224  * Memory space is mapped 1-1, but I/O space must start from 0.
 225  */
 226 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
 227 #define CONFIG_PCI_INDIRECT_BRIDGE
 228 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 229 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 230 #define CONFIG_CMD_PCI
 231
 232 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 233 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
 234
 235 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xc0000000
 236 #ifdef CONFIG_PHYS_64BIT
 237 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 238 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc40000000ull
 239 #else
 240 #define CONFIG_SYS_PCIE1_MEM_BUS        0xc0000000
 241 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc0000000
 242 #endif
 243 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 244 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc20000
 245 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 246 #ifdef CONFIG_PHYS_64BIT
 247 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc20000ull
 248 #else
 249 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc20000
 250 #endif
 251 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 252
 253 /*
 254  * SATA
 255  */
 256 #define CONFIG_LIBATA
 257 #define CONFIG_LBA48
 258 #define CONFIG_CMD_SATA
 259
 260 #define CONFIG_FSL_SATA
 261 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 262 #define CONFIG_SATA1
 263 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 264 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 265 #define CONFIG_SATA2
 266 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 267 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 268
 269 /*
 270  * Ethernet
 271  */
 272 #define CONFIG_TSEC_ENET
 273
 274 #define CONFIG_TSECV2
 275
 276 #define CONFIG_MII                      /* MII PHY management */
 277 #define CONFIG_TSEC1            1
 278 #define CONFIG_TSEC1_NAME       "eTSEC1"
 279 #define CONFIG_TSEC2            1
 280 #define CONFIG_TSEC2_NAME       "eTSEC2"
 281
 282 #define TSEC1_PHY_ADDR          0
 283 #define TSEC2_PHY_ADDR          1
 284
 285 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 286 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 287
 288 #define TSEC1_PHYIDX            0
 289 #define TSEC2_PHYIDX            0
 290
 291 #define CONFIG_ETHPRIME         "eTSEC1"
 292
 293 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 294
 295 /*
 296  * USB
 297  */
 298 #define CONFIG_USB_EHCI
 299
 300 #define CONFIG_HAS_FSL_DR_USB
 301 #define CONFIG_USB_EHCI_FSL
 302 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 303
 304 #endif /* CONFIG_TRAILBLAZER */
 305
 306 /*
 307  * Environment
 308  */
 309 #if defined(CONFIG_TRAILBLAZER)
 310 #define CONFIG_ENV_IS_NOWHERE
 311 #define CONFIG_ENV_SIZE         0x2000          /* 8KB */
 312 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 313 #define CONFIG_ENV_IS_IN_SPI_FLASH
 314 #define CONFIG_ENV_SPI_BUS      0
 315 #define CONFIG_ENV_SPI_CS       0
 316 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 317 #define CONFIG_ENV_SPI_MODE     0
 318 #define CONFIG_ENV_SIZE         0x2000          /* 8KB */
 319 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 320 #define CONFIG_ENV_SECT_SIZE    0x10000
 321 #elif defined(CONFIG_RAMBOOT_SDCARD)
 322 #define CONFIG_ENV_IS_IN_MMC
 323 #define CONFIG_FSL_FIXED_MMC_LOCATION
 324 #define CONFIG_ENV_SIZE         0x2000
 325 #define CONFIG_SYS_MMC_ENV_DEV  0
 326 #endif
 327
 328 #define CONFIG_SYS_EXTRA_ENV_RELOC
 329
 330 /*
 331  * Command line configuration.
 332  */
 333 #ifndef CONFIG_TRAILBLAZER
 334 #define CONFIG_SYS_LONGHELP
 335 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 336 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 337 #endif /* CONFIG_TRAILBLAZER */
 338
 339 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 340 #ifdef CONFIG_CMD_KGDB
 341 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 342 #else
 343 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 344 #endif
 345 /* Print Buffer Size */
 346 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 347 #define CONFIG_SYS_MAXARGS      16
 348 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 349
 350 #ifndef CONFIG_TRAILBLAZER
 351
 352 #define CONFIG_CMD_ERRATA
 353 #define CONFIG_CMD_IRQ
 354 #define CONFIG_CMD_REGINFO
 355
 356 /*
 357  * Board initialisation callbacks
 358  */
 359 #define CONFIG_BOARD_EARLY_INIT_R
 360 #define CONFIG_MISC_INIT_R
 361 #define CONFIG_LAST_STAGE_INIT
 362
 363 #else /* CONFIG_TRAILBLAZER */
 364
 365 #define CONFIG_BOARD_EARLY_INIT_R
 366 #define CONFIG_LAST_STAGE_INIT
 367
 368 #endif /* CONFIG_TRAILBLAZER */
 369
 370 /*
 371  * Miscellaneous configurable options
 372  */
 373 #define CONFIG_HW_WATCHDOG
 374 #define CONFIG_LOADS_ECHO
 375 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 376 #define CONFIG_DOS_PARTITION
 377
 378 /*
 379  * For booting Linux, the board info and command line data
 380  * have to be in the first 64 MB of memory, since this is
 381  * the maximum mapped by the Linux kernel during initialization.
 382  */
 383 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Linux Memory map */
 384 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 385
 386 /*
 387  * Environment Configuration
 388  */
 389
 390 #ifdef CONFIG_TRAILBLAZER
 391
 392 #define CONFIG_BAUDRATE 115200
 393
 394 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 395         "mp_holdoff=1\0"
 396
 397 #else
 398
 399 #define CONFIG_HOSTNAME         controlcenterd
 400 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 401 #define CONFIG_BOOTFILE         "uImage"
 402 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP */
 403
 404 #define CONFIG_LOADADDR         1000000
 405
 406
 407 #define CONFIG_BAUDRATE 115200
 408
 409 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 410         "netdev=eth0\0"                                         \
 411         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 412         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 413         "tftpflash=tftpboot $loadaddr $uboot && "               \
 414                 "protect off $ubootaddr +$filesize && "         \
 415                 "erase $ubootaddr +$filesize && "               \
 416                 "cp.b $loadaddr $ubootaddr $filesize && "       \
 417                 "protect on $ubootaddr +$filesize && "          \
 418                 "cmp.b $loadaddr $ubootaddr $filesize\0"        \
 419         "consoledev=ttyS1\0"                                    \
 420         "ramdiskaddr=2000000\0"                                 \
 421         "ramdiskfile=rootfs.ext2.gz.uboot\0"                    \
 422         "fdtaddr=1e00000\0"                                     \
 423         "fdtfile=controlcenterd.dtb\0"                          \
 424         "bdev=sda3\0"
 425
 426 /* these are used and NUL-terminated in env_default.h */
 427 #define CONFIG_NFSBOOTCOMMAND                                           \
 428         "setenv bootargs root=/dev/nfs rw "                             \
 429         "nfsroot=$serverip:$rootpath "                                  \
 430         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 431         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 432         "tftp $loadaddr $bootfile;"                                     \
 433         "tftp $fdtaddr $fdtfile;"                                       \
 434         "bootm $loadaddr - $fdtaddr"
 435
 436 #define CONFIG_RAMBOOTCOMMAND                                           \
 437         "setenv bootargs root=/dev/ram rw "                             \
 438         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 439         "tftp $ramdiskaddr $ramdiskfile;"                               \
 440         "tftp $loadaddr $bootfile;"                                     \
 441         "tftp $fdtaddr $fdtfile;"                                       \
 442         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 443
 444 #define CONFIG_BOOTCOMMAND              CONFIG_RAMBOOTCOMMAND
 445
 446 #endif /* CONFIG_TRAILBLAZER */
 447
 448 #endif