include/configs/corenet_ds.h

   1 /*
   2  * Copyright 2009-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * Corenet DS style board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include "../board/freescale/common/ics307_clk.h"
  14
  15 #ifdef CONFIG_RAMBOOT_PBL
  16 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  17 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  18 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg
  19 #if defined(CONFIG_P3041DS)
  20 #define CONFIG_SYS_FSL_PBL_RCW \
  21                         $(SRCTREE)/board/freescale/corenet_ds/rcw_p3041ds.cfg
  22 #elif defined(CONFIG_P4080DS)
  23 #define CONFIG_SYS_FSL_PBL_RCW \
  24                         $(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg
  25 #elif defined(CONFIG_P5020DS)
  26 #define CONFIG_SYS_FSL_PBL_RCW \
  27                         $(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg
  28 #elif defined(CONFIG_P5040DS)
  29 #define CONFIG_SYS_FSL_PBL_RCW \
  30                         $(SRCTREE)/board/freescale/corenet_ds/rcw_p5040ds.cfg
  31 #endif
  32 #endif
  33
  34 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  35 /* Set 1M boot space */
  36 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  37 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  38                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  39 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  40 #define CONFIG_SYS_NO_FLASH
  41 #endif
  42
  43 /* High Level Configuration Options */
  44 #define CONFIG_BOOKE
  45 #define CONFIG_E500                     /* BOOKE e500 family */
  46 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  47 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  48 #define CONFIG_MPC85xx                  /* MPC85xx/PQ3 platform */
  49 #define CONFIG_MP                       /* support multiple processors */
  50
  51 #ifndef CONFIG_SYS_TEXT_BASE
  52 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  53 #endif
  54
  55 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  56 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  57 #endif
  58
  59 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  60 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  61 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
  62 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  63 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  64 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  65 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  66 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  67
  68 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  69
  70 #define CONFIG_ENV_OVERWRITE
  71
  72 #ifdef CONFIG_SYS_NO_FLASH
  73 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
  74 #define CONFIG_ENV_IS_NOWHERE
  75 #endif
  76 #else
  77 #define CONFIG_FLASH_CFI_DRIVER
  78 #define CONFIG_SYS_FLASH_CFI
  79 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  80 #endif
  81
  82 #if defined(CONFIG_SPIFLASH)
  83 #define CONFIG_SYS_EXTRA_ENV_RELOC
  84 #define CONFIG_ENV_IS_IN_SPI_FLASH
  85 #define CONFIG_ENV_SPI_BUS              0
  86 #define CONFIG_ENV_SPI_CS               0
  87 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  88 #define CONFIG_ENV_SPI_MODE             0
  89 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  90 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  91 #define CONFIG_ENV_SECT_SIZE            0x10000
  92 #elif defined(CONFIG_SDCARD)
  93 #define CONFIG_SYS_EXTRA_ENV_RELOC
  94 #define CONFIG_ENV_IS_IN_MMC
  95 #define CONFIG_FSL_FIXED_MMC_LOCATION
  96 #define CONFIG_SYS_MMC_ENV_DEV          0
  97 #define CONFIG_ENV_SIZE                 0x2000
  98 #define CONFIG_ENV_OFFSET               (512 * 1658)
  99 #elif defined(CONFIG_NAND)
 100 #define CONFIG_SYS_EXTRA_ENV_RELOC
 101 #define CONFIG_ENV_IS_IN_NAND
 102 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 103 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 104 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 105 #define CONFIG_ENV_IS_IN_REMOTE
 106 #define CONFIG_ENV_ADDR         0xffe20000
 107 #define CONFIG_ENV_SIZE         0x2000
 108 #elif defined(CONFIG_ENV_IS_NOWHERE)
 109 #define CONFIG_ENV_SIZE         0x2000
 110 #else
 111 #define CONFIG_ENV_IS_IN_FLASH
 112 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 113 #define CONFIG_ENV_SIZE         0x2000
 114 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 115 #endif
 116
 117 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 118
 119 /*
 120  * These can be toggled for performance analysis, otherwise use default.
 121  */
 122 #define CONFIG_SYS_CACHE_STASHING
 123 #define CONFIG_BACKSIDE_L2_CACHE
 124 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 125 #define CONFIG_BTB                      /* toggle branch predition */
 126 #define CONFIG_DDR_ECC
 127 #ifdef CONFIG_DDR_ECC
 128 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 129 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 130 #endif
 131
 132 #define CONFIG_ENABLE_36BIT_PHYS
 133
 134 #ifdef CONFIG_PHYS_64BIT
 135 #define CONFIG_ADDR_MAP
 136 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 137 #endif
 138
 139 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 140 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 141 #define CONFIG_SYS_MEMTEST_END          0x00400000
 142 #define CONFIG_SYS_ALT_MEMTEST
 143 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 144
 145 /*
 146  *  Config the L3 Cache as L3 SRAM
 147  */
 148 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 149 #ifdef CONFIG_PHYS_64BIT
 150 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
 151 #else
 152 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 153 #endif
 154 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 155 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 156
 157 #ifdef CONFIG_PHYS_64BIT
 158 #define CONFIG_SYS_DCSRBAR              0xf0000000
 159 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 160 #endif
 161
 162 /* EEPROM */
 163 #define CONFIG_ID_EEPROM
 164 #define CONFIG_SYS_I2C_EEPROM_NXID
 165 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 166 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 167 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 168
 169 /*
 170  * DDR Setup
 171  */
 172 #define CONFIG_VERY_BIG_RAM
 173 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 174 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 175
 176 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 177 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 178
 179 #define CONFIG_DDR_SPD
 180 #define CONFIG_SYS_FSL_DDR3
 181
 182 #define CONFIG_SYS_SPD_BUS_NUM  1
 183 #define SPD_EEPROM_ADDRESS1     0x51
 184 #define SPD_EEPROM_ADDRESS2     0x52
 185 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 186 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 187
 188 /*
 189  * Local Bus Definitions
 190  */
 191
 192 /* Set the local bus clock 1/8 of platform clock */
 193 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 194
 195 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* Start of PromJet */
 196 #ifdef CONFIG_PHYS_64BIT
 197 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 198 #else
 199 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 200 #endif
 201
 202 #define CONFIG_SYS_FLASH_BR_PRELIM \
 203                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \
 204                  | BR_PS_16 | BR_V)
 205 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 206                                         | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 207
 208 #define CONFIG_SYS_BR1_PRELIM \
 209         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 210 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 211
 212 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 213 #ifdef CONFIG_PHYS_64BIT
 214 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 215 #else
 216 #define PIXIS_BASE_PHYS         PIXIS_BASE
 217 #endif
 218
 219 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 220 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 221
 222 #define PIXIS_LBMAP_SWITCH      7
 223 #define PIXIS_LBMAP_MASK        0xf0
 224 #define PIXIS_LBMAP_SHIFT       4
 225 #define PIXIS_LBMAP_ALTBANK     0x40
 226
 227 #define CONFIG_SYS_FLASH_QUIET_TEST
 228 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 229
 230 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 231 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 232 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 233 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 234
 235 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 236
 237 #if defined(CONFIG_RAMBOOT_PBL)
 238 #define CONFIG_SYS_RAMBOOT
 239 #endif
 240
 241 /* Nand Flash */
 242 #ifdef CONFIG_NAND_FSL_ELBC
 243 #define CONFIG_SYS_NAND_BASE            0xffa00000
 244 #ifdef CONFIG_PHYS_64BIT
 245 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 246 #else
 247 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 248 #endif
 249
 250 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 251 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 252 #define CONFIG_MTD_NAND_VERIFY_WRITE
 253 #define CONFIG_CMD_NAND
 254 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 255
 256 /* NAND flash config */
 257 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 258                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 259                                | BR_PS_8               /* Port Size = 8 bit */ \
 260                                | BR_MS_FCM             /* MSEL = FCM */ \
 261                                | BR_V)                 /* valid */
 262 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 263                                | OR_FCM_PGS            /* Large Page*/ \
 264                                | OR_FCM_CSCT \
 265                                | OR_FCM_CST \
 266                                | OR_FCM_CHT \
 267                                | OR_FCM_SCY_1 \
 268                                | OR_FCM_TRLX \
 269                                | OR_FCM_EHTR)
 270
 271 #ifdef CONFIG_NAND
 272 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 273 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 274 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 275 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 276 #else
 277 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 278 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 279 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 280 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 281 #endif
 282 #else
 283 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 284 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 285 #endif /* CONFIG_NAND_FSL_ELBC */
 286
 287 #define CONFIG_SYS_FLASH_EMPTY_INFO
 288 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 289 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 290
 291 #define CONFIG_BOARD_EARLY_INIT_F
 292 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 293 #define CONFIG_MISC_INIT_R
 294
 295 #define CONFIG_HWCONFIG
 296
 297 /* define to use L1 as initial stack */
 298 #define CONFIG_L1_INIT_RAM
 299 #define CONFIG_SYS_INIT_RAM_LOCK
 300 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 301 #ifdef CONFIG_PHYS_64BIT
 302 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 303 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 304 /* The assembler doesn't like typecast */
 305 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 306         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 307           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 308 #else
 309 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 310 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 311 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 312 #endif
 313 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 314
 315 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 316 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 317
 318 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 319 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 320
 321 /* Serial Port - controlled on board with jumper J8
 322  * open - index 2
 323  * shorted - index 1
 324  */
 325 #define CONFIG_CONS_INDEX       1
 326 #define CONFIG_SYS_NS16550
 327 #define CONFIG_SYS_NS16550_SERIAL
 328 #define CONFIG_SYS_NS16550_REG_SIZE     1
 329 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 330
 331 #define CONFIG_SYS_BAUDRATE_TABLE       \
 332         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 333
 334 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 335 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 336 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 337 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 338
 339 /* Use the HUSH parser */
 340 #define CONFIG_SYS_HUSH_PARSER
 341
 342 /* pass open firmware flat tree */
 343 #define CONFIG_OF_LIBFDT
 344 #define CONFIG_OF_BOARD_SETUP
 345 #define CONFIG_OF_STDOUT_VIA_ALIAS
 346
 347 /* new uImage format support */
 348 #define CONFIG_FIT
 349 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 350
 351 /* I2C */
 352 #define CONFIG_SYS_I2C
 353 #define CONFIG_SYS_I2C_FSL
 354 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 355 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 356 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 357 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 358 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 359 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 360
 361 /*
 362  * RapidIO
 363  */
 364 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 365 #ifdef CONFIG_PHYS_64BIT
 366 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 367 #else
 368 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 369 #endif
 370 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 371
 372 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 373 #ifdef CONFIG_PHYS_64BIT
 374 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 375 #else
 376 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 377 #endif
 378 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 379
 380 /*
 381  * for slave u-boot IMAGE instored in master memory space,
 382  * PHYS must be aligned based on the SIZE
 383  */
 384 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
 385 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
 386 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000        /* 512K */
 387 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
 388 /*
 389  * for slave UCODE and ENV instored in master memory space,
 390  * PHYS must be aligned based on the SIZE
 391  */
 392 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
 393 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 394 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 395
 396 /* slave core release by master*/
 397 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 398 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 399
 400 /*
 401  * SRIO_PCIE_BOOT - SLAVE
 402  */
 403 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 404 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 405 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 406                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 407 #endif
 408
 409 /*
 410  * eSPI - Enhanced SPI
 411  */
 412 #define CONFIG_FSL_ESPI
 413 #define CONFIG_SPI_FLASH
 414 #define CONFIG_SPI_FLASH_SPANSION
 415 #define CONFIG_CMD_SF
 416 #define CONFIG_SF_DEFAULT_SPEED         10000000
 417 #define CONFIG_SF_DEFAULT_MODE          0
 418
 419 /*
 420  * General PCI
 421  * Memory space is mapped 1-1, but I/O space must start from 0.
 422  */
 423
 424 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 425 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 426 #ifdef CONFIG_PHYS_64BIT
 427 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 428 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 429 #else
 430 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 431 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 432 #endif
 433 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 434 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 435 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 436 #ifdef CONFIG_PHYS_64BIT
 437 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 438 #else
 439 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 440 #endif
 441 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 442
 443 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 444 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 445 #ifdef CONFIG_PHYS_64BIT
 446 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 447 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 448 #else
 449 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 450 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 451 #endif
 452 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 453 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 454 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 455 #ifdef CONFIG_PHYS_64BIT
 456 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 457 #else
 458 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 459 #endif
 460 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 461
 462 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 463 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 464 #ifdef CONFIG_PHYS_64BIT
 465 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 466 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 467 #else
 468 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 469 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 470 #endif
 471 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 472 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 473 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 474 #ifdef CONFIG_PHYS_64BIT
 475 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 476 #else
 477 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 478 #endif
 479 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 480
 481 /* controller 4, Base address 203000 */
 482 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 483 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 484 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 485 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 486 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 487 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 488
 489 /* Qman/Bman */
 490 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 491 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 492 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 493 #ifdef CONFIG_PHYS_64BIT
 494 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 495 #else
 496 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 497 #endif
 498 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 499 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 500 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 501 #ifdef CONFIG_PHYS_64BIT
 502 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 503 #else
 504 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 505 #endif
 506 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 507
 508 #define CONFIG_SYS_DPAA_FMAN
 509 #define CONFIG_SYS_DPAA_PME
 510 /* Default address of microcode for the Linux Fman driver */
 511 #if defined(CONFIG_SPIFLASH)
 512 /*
 513  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 514  * env, so we got 0x110000.
 515  */
 516 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 517 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 518 #elif defined(CONFIG_SDCARD)
 519 /*
 520  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 521  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 522  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 523  */
 524 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 525 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1680)
 526 #elif defined(CONFIG_NAND)
 527 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 528 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 529 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 530 /*
 531  * Slave has no ucode locally, it can fetch this from remote. When implementing
 532  * in two corenet boards, slave's ucode could be stored in master's memory
 533  * space, the address can be mapped from slave TLB->slave LAW->
 534  * slave SRIO or PCIE outbound window->master inbound window->
 535  * master LAW->the ucode address in master's memory space.
 536  */
 537 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 538 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0xFFE00000
 539 #else
 540 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 541 #define CONFIG_SYS_QE_FMAN_FW_ADDR              0xEFF00000
 542 #endif
 543 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 544 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 545
 546 #ifdef CONFIG_SYS_DPAA_FMAN
 547 #define CONFIG_FMAN_ENET
 548 #define CONFIG_PHYLIB_10G
 549 #define CONFIG_PHY_VITESSE
 550 #define CONFIG_PHY_TERANETICS
 551 #endif
 552
 553 #ifdef CONFIG_PCI
 554 #define CONFIG_PCI_INDIRECT_BRIDGE
 555 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 556 #define CONFIG_E1000
 557
 558 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 559 #define CONFIG_DOS_PARTITION
 560 #endif  /* CONFIG_PCI */
 561
 562 /* SATA */
 563 #ifdef CONFIG_FSL_SATA_V2
 564 #define CONFIG_LIBATA
 565 #define CONFIG_FSL_SATA
 566
 567 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 568 #define CONFIG_SATA1
 569 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 570 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 571 #define CONFIG_SATA2
 572 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 573 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 574
 575 #define CONFIG_LBA48
 576 #define CONFIG_CMD_SATA
 577 #define CONFIG_DOS_PARTITION
 578 #define CONFIG_CMD_EXT2
 579 #endif
 580
 581 #ifdef CONFIG_FMAN_ENET
 582 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1c
 583 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x1d
 584 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x1e
 585 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1f
 586 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 587
 588 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR  0x1c
 589 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR  0x1d
 590 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR  0x1e
 591 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR  0x1f
 592 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR  0
 593
 594 #define CONFIG_SYS_TBIPA_VALUE  8
 595 #define CONFIG_MII              /* MII PHY management */
 596 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 597 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 598 #endif
 599
 600 /*
 601  * Environment
 602  */
 603 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 604 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 605
 606 /*
 607  * Command line configuration.
 608  */
 609 #include <config_cmd_default.h>
 610
 611 #define CONFIG_CMD_DHCP
 612 #define CONFIG_CMD_ELF
 613 #define CONFIG_CMD_ERRATA
 614 #define CONFIG_CMD_GREPENV
 615 #define CONFIG_CMD_IRQ
 616 #define CONFIG_CMD_I2C
 617 #define CONFIG_CMD_MII
 618 #define CONFIG_CMD_PING
 619 #define CONFIG_CMD_SETEXPR
 620 #define CONFIG_CMD_REGINFO
 621
 622 #ifdef CONFIG_PCI
 623 #define CONFIG_CMD_PCI
 624 #define CONFIG_CMD_NET
 625 #endif
 626
 627 /*
 628 * USB
 629 */
 630 #define CONFIG_HAS_FSL_DR_USB
 631 #define CONFIG_HAS_FSL_MPH_USB
 632
 633 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 634 #define CONFIG_CMD_USB
 635 #define CONFIG_USB_STORAGE
 636 #define CONFIG_USB_EHCI
 637 #define CONFIG_USB_EHCI_FSL
 638 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 639 #define CONFIG_CMD_EXT2
 640 #endif
 641
 642 #ifdef CONFIG_MMC
 643 #define CONFIG_FSL_ESDHC
 644 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 645 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 646 #define CONFIG_CMD_MMC
 647 #define CONFIG_GENERIC_MMC
 648 #define CONFIG_CMD_EXT2
 649 #define CONFIG_CMD_FAT
 650 #define CONFIG_DOS_PARTITION
 651 #endif
 652
 653 /*
 654  * Miscellaneous configurable options
 655  */
 656 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 657 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 658 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 659 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 660 #ifdef CONFIG_CMD_KGDB
 661 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 662 #else
 663 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 664 #endif
 665 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 666 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 667 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 668
 669 /*
 670  * For booting Linux, the board info and command line data
 671  * have to be in the first 64 MB of memory, since this is
 672  * the maximum mapped by the Linux kernel during initialization.
 673  */
 674 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 675 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 676
 677 #ifdef CONFIG_CMD_KGDB
 678 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 679 #endif
 680
 681 /*
 682  * Environment Configuration
 683  */
 684 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 685 #define CONFIG_BOOTFILE         "uImage"
 686 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 687
 688 /* default location for tftp and bootm */
 689 #define CONFIG_LOADADDR         1000000
 690
 691 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 692
 693 #define CONFIG_BAUDRATE 115200
 694
 695 #ifdef CONFIG_P4080DS
 696 #define __USB_PHY_TYPE  ulpi
 697 #else
 698 #define __USB_PHY_TYPE  utmi
 699 #endif
 700
 701 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 702         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 703         "bank_intlv=cs0_cs1;"                                   \
 704         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 705         "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 706         "netdev=eth0\0"                                         \
 707         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 708         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 709         "tftpflash=tftpboot $loadaddr $uboot && "               \
 710         "protect off $ubootaddr +$filesize && "                 \
 711         "erase $ubootaddr +$filesize && "                       \
 712         "cp.b $loadaddr $ubootaddr $filesize && "               \
 713         "protect on $ubootaddr +$filesize && "                  \
 714         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 715         "consoledev=ttyS0\0"                                    \
 716         "ramdiskaddr=2000000\0"                                 \
 717         "ramdiskfile=p4080ds/ramdisk.uboot\0"                   \
 718         "fdtaddr=c00000\0"                                      \
 719         "fdtfile=p4080ds/p4080ds.dtb\0"                         \
 720         "bdev=sda3\0"                                           \
 721         "c=ffe\0"
 722
 723 #define CONFIG_HDBOOT                                   \
 724         "setenv bootargs root=/dev/$bdev rw "           \
 725         "console=$consoledev,$baudrate $othbootargs;"   \
 726         "tftp $loadaddr $bootfile;"                     \
 727         "tftp $fdtaddr $fdtfile;"                       \
 728         "bootm $loadaddr - $fdtaddr"
 729
 730 #define CONFIG_NFSBOOTCOMMAND                   \
 731         "setenv bootargs root=/dev/nfs rw "     \
 732         "nfsroot=$serverip:$rootpath "          \
 733         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 734         "console=$consoledev,$baudrate $othbootargs;"   \
 735         "tftp $loadaddr $bootfile;"             \
 736         "tftp $fdtaddr $fdtfile;"               \
 737         "bootm $loadaddr - $fdtaddr"
 738
 739 #define CONFIG_RAMBOOTCOMMAND                           \
 740         "setenv bootargs root=/dev/ram rw "             \
 741         "console=$consoledev,$baudrate $othbootargs;"   \
 742         "tftp $ramdiskaddr $ramdiskfile;"               \
 743         "tftp $loadaddr $bootfile;"                     \
 744         "tftp $fdtaddr $fdtfile;"                       \
 745         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 746
 747 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 748
 749 #include <asm/fsl_secure_boot.h>
 750
 751 #endif  /* __CONFIG_H */