include/configs/corenet_ds.h

   1 /*
   2  * Copyright 2009-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * Corenet DS style board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include "../board/freescale/common/ics307_clk.h"
  14
  15 #ifdef CONFIG_RAMBOOT_PBL
  16 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  17 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  18 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
  19 #if defined(CONFIG_P3041DS)
  20 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p3041ds.cfg
  21 #elif defined(CONFIG_P4080DS)
  22 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p4080ds.cfg
  23 #elif defined(CONFIG_P5020DS)
  24 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5020ds.cfg
  25 #elif defined(CONFIG_P5040DS)
  26 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5040ds.cfg
  27 #endif
  28 #endif
  29
  30 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  31 /* Set 1M boot space */
  32 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  33 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  34                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  35 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  36 #define CONFIG_SYS_NO_FLASH
  37 #endif
  38
  39 /* High Level Configuration Options */
  40 #define CONFIG_BOOKE
  41 #define CONFIG_E500                     /* BOOKE e500 family */
  42 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  43 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  44 #define CONFIG_MP                       /* support multiple processors */
  45
  46 #ifndef CONFIG_SYS_TEXT_BASE
  47 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  48 #endif
  49
  50 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  51 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  52 #endif
  53
  54 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  55 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  56 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
  57 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  58 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  59 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  60 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  61 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  62
  63 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  64
  65 #define CONFIG_ENV_OVERWRITE
  66
  67 #ifdef CONFIG_SYS_NO_FLASH
  68 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
  69 #define CONFIG_ENV_IS_NOWHERE
  70 #endif
  71 #else
  72 #define CONFIG_FLASH_CFI_DRIVER
  73 #define CONFIG_SYS_FLASH_CFI
  74 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  75 #endif
  76
  77 #if defined(CONFIG_SPIFLASH)
  78 #define CONFIG_SYS_EXTRA_ENV_RELOC
  79 #define CONFIG_ENV_IS_IN_SPI_FLASH
  80 #define CONFIG_ENV_SPI_BUS              0
  81 #define CONFIG_ENV_SPI_CS               0
  82 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  83 #define CONFIG_ENV_SPI_MODE             0
  84 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  85 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  86 #define CONFIG_ENV_SECT_SIZE            0x10000
  87 #elif defined(CONFIG_SDCARD)
  88 #define CONFIG_SYS_EXTRA_ENV_RELOC
  89 #define CONFIG_ENV_IS_IN_MMC
  90 #define CONFIG_FSL_FIXED_MMC_LOCATION
  91 #define CONFIG_SYS_MMC_ENV_DEV          0
  92 #define CONFIG_ENV_SIZE                 0x2000
  93 #define CONFIG_ENV_OFFSET               (512 * 1658)
  94 #elif defined(CONFIG_NAND)
  95 #define CONFIG_SYS_EXTRA_ENV_RELOC
  96 #define CONFIG_ENV_IS_IN_NAND
  97 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
  98 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
  99 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 100 #define CONFIG_ENV_IS_IN_REMOTE
 101 #define CONFIG_ENV_ADDR         0xffe20000
 102 #define CONFIG_ENV_SIZE         0x2000
 103 #elif defined(CONFIG_ENV_IS_NOWHERE)
 104 #define CONFIG_ENV_SIZE         0x2000
 105 #else
 106 #define CONFIG_ENV_IS_IN_FLASH
 107 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 108 #define CONFIG_ENV_SIZE         0x2000
 109 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 110 #endif
 111
 112 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 113
 114 /*
 115  * These can be toggled for performance analysis, otherwise use default.
 116  */
 117 #define CONFIG_SYS_CACHE_STASHING
 118 #define CONFIG_BACKSIDE_L2_CACHE
 119 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 120 #define CONFIG_BTB                      /* toggle branch predition */
 121 #define CONFIG_DDR_ECC
 122 #ifdef CONFIG_DDR_ECC
 123 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 124 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 125 #endif
 126
 127 #define CONFIG_ENABLE_36BIT_PHYS
 128
 129 #ifdef CONFIG_PHYS_64BIT
 130 #define CONFIG_ADDR_MAP
 131 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 132 #endif
 133
 134 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 135 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 136 #define CONFIG_SYS_MEMTEST_END          0x00400000
 137 #define CONFIG_SYS_ALT_MEMTEST
 138 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 139
 140 /*
 141  *  Config the L3 Cache as L3 SRAM
 142  */
 143 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 144 #ifdef CONFIG_PHYS_64BIT
 145 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
 146 #else
 147 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 148 #endif
 149 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 150 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 151
 152 #ifdef CONFIG_PHYS_64BIT
 153 #define CONFIG_SYS_DCSRBAR              0xf0000000
 154 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 155 #endif
 156
 157 /* EEPROM */
 158 #define CONFIG_ID_EEPROM
 159 #define CONFIG_SYS_I2C_EEPROM_NXID
 160 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 161 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 162 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 163
 164 /*
 165  * DDR Setup
 166  */
 167 #define CONFIG_VERY_BIG_RAM
 168 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 169 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 170
 171 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 172 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 173
 174 #define CONFIG_DDR_SPD
 175 #define CONFIG_SYS_FSL_DDR3
 176
 177 #define CONFIG_SYS_SPD_BUS_NUM  1
 178 #define SPD_EEPROM_ADDRESS1     0x51
 179 #define SPD_EEPROM_ADDRESS2     0x52
 180 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 181 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 182
 183 /*
 184  * Local Bus Definitions
 185  */
 186
 187 /* Set the local bus clock 1/8 of platform clock */
 188 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 189
 190 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* Start of PromJet */
 191 #ifdef CONFIG_PHYS_64BIT
 192 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 193 #else
 194 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 195 #endif
 196
 197 #define CONFIG_SYS_FLASH_BR_PRELIM \
 198                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \
 199                  | BR_PS_16 | BR_V)
 200 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 201                                         | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 202
 203 #define CONFIG_SYS_BR1_PRELIM \
 204         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 205 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 206
 207 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 208 #ifdef CONFIG_PHYS_64BIT
 209 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 210 #else
 211 #define PIXIS_BASE_PHYS         PIXIS_BASE
 212 #endif
 213
 214 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 215 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 216
 217 #define PIXIS_LBMAP_SWITCH      7
 218 #define PIXIS_LBMAP_MASK        0xf0
 219 #define PIXIS_LBMAP_SHIFT       4
 220 #define PIXIS_LBMAP_ALTBANK     0x40
 221
 222 #define CONFIG_SYS_FLASH_QUIET_TEST
 223 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 224
 225 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 226 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 227 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 228 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 229
 230 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 231
 232 #if defined(CONFIG_RAMBOOT_PBL)
 233 #define CONFIG_SYS_RAMBOOT
 234 #endif
 235
 236 /* Nand Flash */
 237 #ifdef CONFIG_NAND_FSL_ELBC
 238 #define CONFIG_SYS_NAND_BASE            0xffa00000
 239 #ifdef CONFIG_PHYS_64BIT
 240 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 241 #else
 242 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 243 #endif
 244
 245 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 246 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 247 #define CONFIG_MTD_NAND_VERIFY_WRITE
 248 #define CONFIG_CMD_NAND
 249 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 250
 251 /* NAND flash config */
 252 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 253                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 254                                | BR_PS_8               /* Port Size = 8 bit */ \
 255                                | BR_MS_FCM             /* MSEL = FCM */ \
 256                                | BR_V)                 /* valid */
 257 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 258                                | OR_FCM_PGS            /* Large Page*/ \
 259                                | OR_FCM_CSCT \
 260                                | OR_FCM_CST \
 261                                | OR_FCM_CHT \
 262                                | OR_FCM_SCY_1 \
 263                                | OR_FCM_TRLX \
 264                                | OR_FCM_EHTR)
 265
 266 #ifdef CONFIG_NAND
 267 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 268 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 269 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 270 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 271 #else
 272 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 273 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 274 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 275 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 276 #endif
 277 #else
 278 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 279 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 280 #endif /* CONFIG_NAND_FSL_ELBC */
 281
 282 #define CONFIG_SYS_FLASH_EMPTY_INFO
 283 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 284 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 285
 286 #define CONFIG_BOARD_EARLY_INIT_F
 287 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 288 #define CONFIG_MISC_INIT_R
 289
 290 #define CONFIG_HWCONFIG
 291
 292 /* define to use L1 as initial stack */
 293 #define CONFIG_L1_INIT_RAM
 294 #define CONFIG_SYS_INIT_RAM_LOCK
 295 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 296 #ifdef CONFIG_PHYS_64BIT
 297 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 298 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 299 /* The assembler doesn't like typecast */
 300 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 301         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 302           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 303 #else
 304 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 305 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 306 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 307 #endif
 308 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 309
 310 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 311 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 312
 313 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 314 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 315
 316 /* Serial Port - controlled on board with jumper J8
 317  * open - index 2
 318  * shorted - index 1
 319  */
 320 #define CONFIG_CONS_INDEX       1
 321 #define CONFIG_SYS_NS16550
 322 #define CONFIG_SYS_NS16550_SERIAL
 323 #define CONFIG_SYS_NS16550_REG_SIZE     1
 324 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 325
 326 #define CONFIG_SYS_BAUDRATE_TABLE       \
 327         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 328
 329 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 330 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 331 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 332 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 333
 334 /* Use the HUSH parser */
 335 #define CONFIG_SYS_HUSH_PARSER
 336
 337 /* pass open firmware flat tree */
 338 #define CONFIG_OF_LIBFDT
 339 #define CONFIG_OF_BOARD_SETUP
 340 #define CONFIG_OF_STDOUT_VIA_ALIAS
 341
 342 /* new uImage format support */
 343 #define CONFIG_FIT
 344 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 345
 346 /* I2C */
 347 #define CONFIG_SYS_I2C
 348 #define CONFIG_SYS_I2C_FSL
 349 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 350 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 351 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 352 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 353 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 354 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 355
 356 /*
 357  * RapidIO
 358  */
 359 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 360 #ifdef CONFIG_PHYS_64BIT
 361 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 362 #else
 363 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 364 #endif
 365 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 366
 367 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 368 #ifdef CONFIG_PHYS_64BIT
 369 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 370 #else
 371 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 372 #endif
 373 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 374
 375 /*
 376  * for slave u-boot IMAGE instored in master memory space,
 377  * PHYS must be aligned based on the SIZE
 378  */
 379 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
 380 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
 381 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000        /* 512K */
 382 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
 383 /*
 384  * for slave UCODE and ENV instored in master memory space,
 385  * PHYS must be aligned based on the SIZE
 386  */
 387 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
 388 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 389 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 390
 391 /* slave core release by master*/
 392 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 393 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 394
 395 /*
 396  * SRIO_PCIE_BOOT - SLAVE
 397  */
 398 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 399 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 400 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 401                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 402 #endif
 403
 404 /*
 405  * eSPI - Enhanced SPI
 406  */
 407 #define CONFIG_FSL_ESPI
 408 #define CONFIG_SPI_FLASH
 409 #define CONFIG_SPI_FLASH_SPANSION
 410 #define CONFIG_CMD_SF
 411 #define CONFIG_SF_DEFAULT_SPEED         10000000
 412 #define CONFIG_SF_DEFAULT_MODE          0
 413
 414 /*
 415  * General PCI
 416  * Memory space is mapped 1-1, but I/O space must start from 0.
 417  */
 418
 419 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 420 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 421 #ifdef CONFIG_PHYS_64BIT
 422 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 423 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 424 #else
 425 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 426 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 427 #endif
 428 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 429 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 430 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 431 #ifdef CONFIG_PHYS_64BIT
 432 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 433 #else
 434 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 435 #endif
 436 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 437
 438 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 439 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 440 #ifdef CONFIG_PHYS_64BIT
 441 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 442 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 443 #else
 444 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 445 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 446 #endif
 447 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 448 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 449 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 450 #ifdef CONFIG_PHYS_64BIT
 451 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 452 #else
 453 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 454 #endif
 455 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 456
 457 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 458 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 459 #ifdef CONFIG_PHYS_64BIT
 460 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 461 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 462 #else
 463 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 464 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 465 #endif
 466 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 467 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 468 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 469 #ifdef CONFIG_PHYS_64BIT
 470 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 471 #else
 472 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 473 #endif
 474 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 475
 476 /* controller 4, Base address 203000 */
 477 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 478 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 479 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 480 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 481 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 482 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 483
 484 /* Qman/Bman */
 485 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 486 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 487 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 488 #ifdef CONFIG_PHYS_64BIT
 489 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 490 #else
 491 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 492 #endif
 493 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 494 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 495 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 496 #ifdef CONFIG_PHYS_64BIT
 497 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 498 #else
 499 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 500 #endif
 501 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 502
 503 #define CONFIG_SYS_DPAA_FMAN
 504 #define CONFIG_SYS_DPAA_PME
 505 /* Default address of microcode for the Linux Fman driver */
 506 #if defined(CONFIG_SPIFLASH)
 507 /*
 508  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 509  * env, so we got 0x110000.
 510  */
 511 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 512 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 513 #elif defined(CONFIG_SDCARD)
 514 /*
 515  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 516  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 517  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 518  */
 519 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 520 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1680)
 521 #elif defined(CONFIG_NAND)
 522 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 523 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 524 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 525 /*
 526  * Slave has no ucode locally, it can fetch this from remote. When implementing
 527  * in two corenet boards, slave's ucode could be stored in master's memory
 528  * space, the address can be mapped from slave TLB->slave LAW->
 529  * slave SRIO or PCIE outbound window->master inbound window->
 530  * master LAW->the ucode address in master's memory space.
 531  */
 532 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 533 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0xFFE00000
 534 #else
 535 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 536 #define CONFIG_SYS_QE_FMAN_FW_ADDR              0xEFF00000
 537 #endif
 538 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 539 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 540
 541 #ifdef CONFIG_SYS_DPAA_FMAN
 542 #define CONFIG_FMAN_ENET
 543 #define CONFIG_PHYLIB_10G
 544 #define CONFIG_PHY_VITESSE
 545 #define CONFIG_PHY_TERANETICS
 546 #endif
 547
 548 #ifdef CONFIG_PCI
 549 #define CONFIG_PCI_INDIRECT_BRIDGE
 550 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 551 #define CONFIG_E1000
 552
 553 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 554 #define CONFIG_DOS_PARTITION
 555 #endif  /* CONFIG_PCI */
 556
 557 /* SATA */
 558 #ifdef CONFIG_FSL_SATA_V2
 559 #define CONFIG_LIBATA
 560 #define CONFIG_FSL_SATA
 561
 562 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 563 #define CONFIG_SATA1
 564 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 565 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 566 #define CONFIG_SATA2
 567 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 568 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 569
 570 #define CONFIG_LBA48
 571 #define CONFIG_CMD_SATA
 572 #define CONFIG_DOS_PARTITION
 573 #define CONFIG_CMD_EXT2
 574 #endif
 575
 576 #ifdef CONFIG_FMAN_ENET
 577 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1c
 578 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x1d
 579 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x1e
 580 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1f
 581 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 582
 583 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR  0x1c
 584 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR  0x1d
 585 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR  0x1e
 586 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR  0x1f
 587 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR  0
 588
 589 #define CONFIG_SYS_TBIPA_VALUE  8
 590 #define CONFIG_MII              /* MII PHY management */
 591 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 592 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 593 #endif
 594
 595 /*
 596  * Environment
 597  */
 598 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 599 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 600
 601 /*
 602  * Command line configuration.
 603  */
 604 #include <config_cmd_default.h>
 605
 606 #define CONFIG_CMD_DHCP
 607 #define CONFIG_CMD_ELF
 608 #define CONFIG_CMD_ERRATA
 609 #define CONFIG_CMD_GREPENV
 610 #define CONFIG_CMD_IRQ
 611 #define CONFIG_CMD_I2C
 612 #define CONFIG_CMD_MII
 613 #define CONFIG_CMD_PING
 614 #define CONFIG_CMD_SETEXPR
 615 #define CONFIG_CMD_REGINFO
 616
 617 #ifdef CONFIG_PCI
 618 #define CONFIG_CMD_PCI
 619 #define CONFIG_CMD_NET
 620 #endif
 621
 622 /*
 623 * USB
 624 */
 625 #define CONFIG_HAS_FSL_DR_USB
 626 #define CONFIG_HAS_FSL_MPH_USB
 627
 628 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 629 #define CONFIG_CMD_USB
 630 #define CONFIG_USB_STORAGE
 631 #define CONFIG_USB_EHCI
 632 #define CONFIG_USB_EHCI_FSL
 633 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 634 #define CONFIG_CMD_EXT2
 635 #endif
 636
 637 #ifdef CONFIG_MMC
 638 #define CONFIG_FSL_ESDHC
 639 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 640 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 641 #define CONFIG_CMD_MMC
 642 #define CONFIG_GENERIC_MMC
 643 #define CONFIG_CMD_EXT2
 644 #define CONFIG_CMD_FAT
 645 #define CONFIG_DOS_PARTITION
 646 #endif
 647
 648 /*
 649  * Miscellaneous configurable options
 650  */
 651 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 652 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 653 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 654 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 655 #ifdef CONFIG_CMD_KGDB
 656 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 657 #else
 658 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 659 #endif
 660 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 661 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 662 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 663
 664 /*
 665  * For booting Linux, the board info and command line data
 666  * have to be in the first 64 MB of memory, since this is
 667  * the maximum mapped by the Linux kernel during initialization.
 668  */
 669 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 670 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 671
 672 #ifdef CONFIG_CMD_KGDB
 673 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 674 #endif
 675
 676 /*
 677  * Environment Configuration
 678  */
 679 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 680 #define CONFIG_BOOTFILE         "uImage"
 681 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 682
 683 /* default location for tftp and bootm */
 684 #define CONFIG_LOADADDR         1000000
 685
 686 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 687
 688 #define CONFIG_BAUDRATE 115200
 689
 690 #ifdef CONFIG_P4080DS
 691 #define __USB_PHY_TYPE  ulpi
 692 #else
 693 #define __USB_PHY_TYPE  utmi
 694 #endif
 695
 696 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 697         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 698         "bank_intlv=cs0_cs1;"                                   \
 699         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 700         "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 701         "netdev=eth0\0"                                         \
 702         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 703         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 704         "tftpflash=tftpboot $loadaddr $uboot && "               \
 705         "protect off $ubootaddr +$filesize && "                 \
 706         "erase $ubootaddr +$filesize && "                       \
 707         "cp.b $loadaddr $ubootaddr $filesize && "               \
 708         "protect on $ubootaddr +$filesize && "                  \
 709         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 710         "consoledev=ttyS0\0"                                    \
 711         "ramdiskaddr=2000000\0"                                 \
 712         "ramdiskfile=p4080ds/ramdisk.uboot\0"                   \
 713         "fdtaddr=c00000\0"                                      \
 714         "fdtfile=p4080ds/p4080ds.dtb\0"                         \
 715         "bdev=sda3\0"                                           \
 716         "c=ffe\0"
 717
 718 #define CONFIG_HDBOOT                                   \
 719         "setenv bootargs root=/dev/$bdev rw "           \
 720         "console=$consoledev,$baudrate $othbootargs;"   \
 721         "tftp $loadaddr $bootfile;"                     \
 722         "tftp $fdtaddr $fdtfile;"                       \
 723         "bootm $loadaddr - $fdtaddr"
 724
 725 #define CONFIG_NFSBOOTCOMMAND                   \
 726         "setenv bootargs root=/dev/nfs rw "     \
 727         "nfsroot=$serverip:$rootpath "          \
 728         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 729         "console=$consoledev,$baudrate $othbootargs;"   \
 730         "tftp $loadaddr $bootfile;"             \
 731         "tftp $fdtaddr $fdtfile;"               \
 732         "bootm $loadaddr - $fdtaddr"
 733
 734 #define CONFIG_RAMBOOTCOMMAND                           \
 735         "setenv bootargs root=/dev/ram rw "             \
 736         "console=$consoledev,$baudrate $othbootargs;"   \
 737         "tftp $ramdiskaddr $ramdiskfile;"               \
 738         "tftp $loadaddr $bootfile;"                     \
 739         "tftp $fdtaddr $fdtfile;"                       \
 740         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 741
 742 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 743
 744 #include <asm/fsl_secure_boot.h>
 745
 746 #endif  /* __CONFIG_H */