]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/da850evm.h
Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value
[people/ms/u-boot.git] / include / configs / da850evm.h
1 /*
2 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * Based on davinci_dvevm.h. Original Copyrights follow:
5 *
6 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22
23 #ifndef __CONFIG_H
24 #define __CONFIG_H
25
26 /*
27 * Board
28 */
29 #define CONFIG_DRIVER_TI_EMAC
30
31 /*
32 * SoC Configuration
33 */
34 #define CONFIG_MACH_DAVINCI_DA850_EVM
35 #define CONFIG_ARM926EJS /* arm926ejs CPU core */
36 #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
37 #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
38 #define CONFIG_SYS_OSCIN_FREQ 24000000
39 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
40 #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
41 #define CONFIG_SYS_HZ 1000
42 #define CONFIG_SKIP_LOWLEVEL_INIT
43
44 /*
45 * Memory Info
46 */
47 #define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */
48 #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
49 #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */
50 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
51
52 /* memtest start addr */
53 #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000)
54
55 /* memtest will be run on 16MB */
56 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
57
58 #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
59 #define CONFIG_STACKSIZE (256*1024) /* regular stack */
60
61 /*
62 * Serial Driver info
63 */
64 #define CONFIG_SYS_NS16550
65 #define CONFIG_SYS_NS16550_SERIAL
66 #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
67 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
68 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
69 #define CONFIG_CONS_INDEX 1 /* use UART0 for console */
70 #define CONFIG_BAUDRATE 115200 /* Default baud rate */
71 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
72
73 /*
74 * I2C Configuration
75 */
76 #define CONFIG_HARD_I2C
77 #define CONFIG_DRIVER_DAVINCI_I2C
78 #define CONFIG_SYS_I2C_SPEED 25000
79 #define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
80
81 /*
82 * Flash & Environment
83 */
84 #ifdef CONFIG_USE_NAND
85 #undef CONFIG_ENV_IS_IN_FLASH
86 #define CONFIG_NAND_DAVINCI
87 #define CONFIG_SYS_NO_FLASH
88 #define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
89 #define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
90 #define CONFIG_ENV_SIZE (128 << 10)
91 #define CONFIG_SYS_NAND_USE_FLASH_BBT
92 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
93 #define CONFIG_SYS_NAND_PAGE_2K
94 #define CONFIG_SYS_NAND_CS 3
95 #define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
96 #define CONFIG_SYS_CLE_MASK 0x10
97 #define CONFIG_SYS_ALE_MASK 0x8
98 #undef CONFIG_SYS_NAND_HW_ECC
99 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
100 #define NAND_MAX_CHIPS 1
101 #define DEF_BOOTM ""
102 #endif
103
104 /*
105 * Network & Ethernet Configuration
106 */
107 #ifdef CONFIG_DRIVER_TI_EMAC
108 #define CONFIG_EMAC_MDIO_PHY_NUM 0
109 #define CONFIG_MII
110 #define CONFIG_BOOTP_DEFAULT
111 #define CONFIG_BOOTP_DNS
112 #define CONFIG_BOOTP_DNS2
113 #define CONFIG_BOOTP_SEND_HOSTNAME
114 #define CONFIG_NET_RETRY_COUNT 10
115 #define CONFIG_NET_MULTI
116 #endif
117
118 /*
119 * U-Boot general configuration
120 */
121 #define CONFIG_BOOTFILE "uImage" /* Boot file name */
122 #define CONFIG_SYS_PROMPT "DA850-evm > " /* Command Prompt */
123 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
124 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
125 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
126 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
127 #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
128 #define CONFIG_VERSION_VARIABLE
129 #define CONFIG_AUTO_COMPLETE
130 #define CONFIG_SYS_HUSH_PARSER
131 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
132 #define CONFIG_CMDLINE_EDITING
133 #define CONFIG_SYS_LONGHELP
134 #define CONFIG_CRC32_VERIFY
135 #define CONFIG_MX_CYCLIC
136
137 /*
138 * Linux Information
139 */
140 #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
141 #define CONFIG_CMDLINE_TAG
142 #define CONFIG_SETUP_MEMORY_TAGS
143 #define CONFIG_BOOTARGS \
144 "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"
145 #define CONFIG_BOOTDELAY 3
146
147 /*
148 * U-Boot commands
149 */
150 #include <config_cmd_default.h>
151 #define CONFIG_CMD_ENV
152 #define CONFIG_CMD_ASKENV
153 #define CONFIG_CMD_DHCP
154 #define CONFIG_CMD_DIAG
155 #define CONFIG_CMD_MII
156 #define CONFIG_CMD_PING
157 #define CONFIG_CMD_SAVES
158 #define CONFIG_CMD_MEMORY
159
160 #ifndef CONFIG_DRIVER_TI_EMAC
161 #undef CONFIG_CMD_NET
162 #undef CONFIG_CMD_DHCP
163 #undef CONFIG_CMD_MII
164 #undef CONFIG_CMD_PING
165 #endif
166
167 #ifdef CONFIG_USE_NAND
168 #undef CONFIG_CMD_FLASH
169 #undef CONFIG_CMD_IMLS
170 #define CONFIG_CMD_NAND
171
172 #define CONFIG_CMD_MTDPARTS
173 #define CONFIG_MTD_DEVICE
174 #define CONFIG_MTD_PARTITIONS
175 #define CONFIG_LZO
176 #define CONFIG_RBTREE
177 #define CONFIG_CMD_UBI
178 #define CONFIG_CMD_UBIFS
179 #endif
180
181 #if !defined(CONFIG_USE_NAND) && \
182 !defined(CONFIG_USE_NOR) && \
183 !defined(CONFIG_USE_SPIFLASH)
184 #define CONFIG_ENV_IS_NOWHERE
185 #define CONFIG_SYS_NO_FLASH
186 #define CONFIG_ENV_SIZE (16 << 10)
187 #undef CONFIG_CMD_IMLS
188 #undef CONFIG_CMD_ENV
189 #endif
190
191 /* additions for new relocation code, must added to all boards */
192 #define CONFIG_SYS_SDRAM_BASE 0xc0000000
193 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
194 GENERATED_GBL_DATA_SIZE)
195 #endif /* __CONFIG_H */