]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/davinci_dm365evm.h
9bdd2d661199516ed59642df4d06b0c6a4f6fe40
[people/ms/u-boot.git] / include / configs / davinci_dm365evm.h
1 /*
2 * Copyright (C) 2009 Texas Instruments Incorporated
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9
10 /* Spectrum Digital TMS320DM365 EVM board */
11 #define DAVINCI_DM365EVM
12
13 #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */
14 #define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */
15 #define CONFIG_SYS_CONSOLE_INFO_QUIET
16
17 /* SoC Configuration */
18 #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
19 #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
20 #define CONFIG_SOC_DM365
21
22 /* Memory Info */
23 #define CONFIG_NR_DRAM_BANKS 1
24 #define PHYS_SDRAM_1 0x80000000
25 #define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */
26
27 /* Serial Driver info: UART0 for console */
28 #define CONFIG_SYS_NS16550
29 #define CONFIG_SYS_NS16550_SERIAL
30 #define CONFIG_SYS_NS16550_REG_SIZE -4
31 #define CONFIG_SYS_NS16550_COM1 0x01c20000
32 #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK
33 #define CONFIG_CONS_INDEX 1
34 #define CONFIG_BAUDRATE 115200
35
36 /* EEPROM definitions for EEPROM on DM365 EVM */
37 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
38 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
39 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
40 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
41
42 /* Network Configuration */
43 #define CONFIG_DRIVER_TI_EMAC
44 #define CONFIG_MII
45 #define CONFIG_BOOTP_DNS
46 #define CONFIG_BOOTP_DNS2
47 #define CONFIG_BOOTP_SEND_HOSTNAME
48 #define CONFIG_NET_RETRY_COUNT 10
49
50 /* I2C */
51 #define CONFIG_SYS_I2C
52 #define CONFIG_SYS_I2C_DAVINCI
53 #define CONFIG_SYS_DAVINCI_I2C_SPEED 400000
54 #define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */
55
56 /* NAND: socketed, two chipselects, normally 2 GBytes */
57 #define CONFIG_NAND_DAVINCI
58 #define CONFIG_SYS_NAND_CS 2
59 #define CONFIG_SYS_NAND_USE_FLASH_BBT
60 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
61 #define CONFIG_SYS_NAND_PAGE_2K
62
63 #define CONFIG_SYS_NAND_LARGEPAGE
64 #define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, }
65 /* socket has two chipselects, nCE0 gated by address BIT(14) */
66 #define CONFIG_SYS_MAX_NAND_DEVICE 1
67 #define CONFIG_SYS_NAND_MAX_CHIPS 2
68
69 /* SD/MMC */
70 #define CONFIG_MMC
71 #define CONFIG_GENERIC_MMC
72 #define CONFIG_DAVINCI_MMC
73 #define CONFIG_DAVINCI_MMC_SD1
74 #define CONFIG_MMC_MBLOCK
75
76 #define PINMUX4_USBDRVBUS_BITCLEAR 0x3000
77 #define PINMUX4_USBDRVBUS_BITSET 0x2000
78
79 /* USB Configuration */
80 #define CONFIG_USB_DAVINCI
81 #define CONFIG_USB_MUSB_HCD
82
83 #ifdef CONFIG_USB_DAVINCI
84 #define CONFIG_CMD_USB /* include support for usb */
85 #define CONFIG_CMD_STORAGE /* include support for usb */
86 #define CONFIG_CMD_FAT /* include support for FAT/storage*/
87 #define CONFIG_DOS_PARTITION /* include support for FAT/storage*/
88 #endif
89
90 #ifdef CONFIG_USB_MUSB_HCD /* include support for usb host */
91 #define CONFIG_CMD_USB /* include support for usb cmd */
92 #define CONFIG_USB_STORAGE /* MSC class support */
93 #define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */
94 #define CONFIG_CMD_FAT /* inclue support for FAT/storage */
95 #define CONFIG_DOS_PARTITION /* inclue support for FAT/storage */
96
97 #ifdef CONFIG_USB_KEYBOARD /* HID class support */
98 #define CONFIG_SYS_USB_EVENT_POLL
99
100 #define CONFIG_PREBOOT "usb start"
101 #endif /* CONFIG_USB_KEYBOARD */
102 #endif /* CONFIG_USB_MUSB_HCD */
103
104 #ifdef CONFIG_USB_MUSB_UDC
105 #define CONFIG_USB_DEVICE 1
106 #define CONFIG_USB_TTY 1
107 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
108 #define CONFIG_USBD_VENDORID 0x0451
109 #define CONFIG_USBD_PRODUCTID 0x5678
110 #define CONFIG_USBD_MANUFACTURER "Texas Instruments"
111 #define CONFIG_USBD_PRODUCT_NAME "DM365VM"
112 #endif /* CONFIG_USB_MUSB_UDC */
113
114 /* U-Boot command configuration */
115 #define CONFIG_CMD_ASKENV
116 #define CONFIG_CMD_DHCP
117 #define CONFIG_CMD_I2C
118 #define CONFIG_CMD_PING
119 #define CONFIG_CMD_SAVES
120
121 #ifdef CONFIG_CMD_BDI
122 #define CONFIG_CLOCKS
123 #endif
124
125 #ifdef CONFIG_MMC
126 #define CONFIG_DOS_PARTITION
127 #define CONFIG_CMD_EXT2
128 #define CONFIG_CMD_FAT
129 #define CONFIG_CMD_MMC
130 #endif
131
132 #ifdef CONFIG_NAND_DAVINCI
133 #define CONFIG_CMD_MTDPARTS
134 #define CONFIG_MTD_PARTITIONS
135 #define CONFIG_MTD_DEVICE
136 #define CONFIG_CMD_NAND
137 #define CONFIG_CMD_UBI
138 #define CONFIG_RBTREE
139 #endif
140
141 #define CONFIG_CRC32_VERIFY
142 #define CONFIG_MX_CYCLIC
143
144 /* U-Boot general configuration */
145 #define CONFIG_BOOTFILE "uImage" /* Boot file name */
146 #define CONFIG_SYS_PROMPT "DM36x EVM # " /* Monitor Command Prompt */
147 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
148 #define CONFIG_SYS_PBSIZE /* Print buffer size */ \
149 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
150 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
151 #define CONFIG_SYS_HUSH_PARSER
152 #define CONFIG_SYS_LONGHELP
153
154 #ifdef CONFIG_NAND_DAVINCI
155 #define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */
156 #define CONFIG_ENV_IS_IN_NAND
157 #define CONFIG_ENV_OFFSET 0x3C0000
158 #undef CONFIG_ENV_IS_IN_FLASH
159 #endif
160
161 #if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND)
162 #define CONFIG_CMD_ENV
163 #define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
164 #define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */
165 #define CONFIG_ENV_IS_IN_MMC
166 #undef CONFIG_ENV_IS_IN_FLASH
167 #endif
168
169 #define CONFIG_BOOTDELAY 3
170 #define CONFIG_BOOTCOMMAND \
171 "dhcp;bootm"
172 #define CONFIG_BOOTARGS \
173 "console=ttyS0,115200n8 " \
174 "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro"
175
176 #define CONFIG_CMDLINE_EDITING
177 #define CONFIG_VERSION_VARIABLE
178 #define CONFIG_TIMESTAMP
179
180 /* U-Boot memory configuration */
181 #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */
182 #define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */
183 #define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */
184
185 /* Linux interfacing */
186 #define CONFIG_CMDLINE_TAG
187 #define CONFIG_SETUP_MEMORY_TAGS
188 #define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */
189 #define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */
190
191
192 /* NAND configuration issocketed with two chipselects just like the DM355 EVM.
193 * It normally comes with a 2GByte SLC part with 2KB pages
194 * (and 128KB erase blocks); other
195 * 2GByte parts may have 4KB pages, 256KB erase blocks, and use MLC. (MLC
196 * pretty much demands the 4-bit ECC support.) You can of course swap in
197 * other parts, including small page ones.
198 */
199 #define MTDIDS_DEFAULT "nand0=davinci_nand.0"
200
201 #ifdef CONFIG_SYS_NAND_LARGEPAGE
202 /* Use same layout for 128K/256K blocks; allow some bad blocks */
203 #define PART_BOOT "2m(bootloader)ro,"
204 #else
205 /* Assume 16K erase blocks; allow a few bad ones. */
206 #define PART_BOOT "512k(bootloader)ro,"
207 #endif
208
209 #define PART_KERNEL "4m(kernel)," /* kernel + initramfs */
210 #define PART_REST "-(filesystem)"
211
212 #define MTDPARTS_DEFAULT \
213 "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
214
215 #define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
216
217 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
218 #define CONFIG_SYS_INIT_SP_ADDR \
219 (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
220
221 #endif /* __CONFIG_H */