]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/davinci_schmoogie.h
net: phy/realtek: Add support for RTL8211DN and RTL8211E phy modules
[people/ms/u-boot.git] / include / configs / davinci_schmoogie.h
1 /*
2 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9
10 /*=======*/
11 /* Board */
12 /*=======*/
13 #define SCHMOOGIE
14 #define CONFIG_SYS_NAND_LARGEPAGE
15 #define CONFIG_SYS_USE_NAND
16 #define MACH_TYPE_SCHMOOGIE 1255
17 #define CONFIG_MACH_TYPE MACH_TYPE_SCHMOOGIE
18
19 /*===================*/
20 /* SoC Configuration */
21 /*===================*/
22 #define CONFIG_ARM926EJS /* arm926ejs CPU core */
23 #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
24 #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
25 #define CONFIG_SYS_HZ 1000
26 #define CONFIG_SOC_DM644X
27 /*=============*/
28 /* Memory Info */
29 /*=============*/
30 #define CONFIG_SYS_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */
31 #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */
32 #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */
33 #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
34 #define PHYS_SDRAM_1 0x80000000 /* DDR Start */
35 #define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
36 #define DDR_4BANKS /* 4-bank DDR2 (128MB) */
37 /*====================*/
38 /* Serial Driver info */
39 /*====================*/
40 #define CONFIG_SYS_NS16550
41 #define CONFIG_SYS_NS16550_SERIAL
42 #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */
43 #define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */
44 #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */
45 #define CONFIG_CONS_INDEX 1 /* use UART0 for console */
46 #define CONFIG_BAUDRATE 115200 /* Default baud rate */
47 /*===================*/
48 /* I2C Configuration */
49 /*===================*/
50 #define CONFIG_HARD_I2C
51 #define CONFIG_DRIVER_DAVINCI_I2C
52 #define CONFIG_SYS_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
53 #define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
54 /*==================================*/
55 /* Network & Ethernet Configuration */
56 /*==================================*/
57 #define CONFIG_DRIVER_TI_EMAC
58 #define CONFIG_MII
59 #define CONFIG_BOOTP_DEFAULT
60 #define CONFIG_BOOTP_DNS
61 #define CONFIG_BOOTP_DNS2
62 #define CONFIG_BOOTP_SEND_HOSTNAME
63 #define CONFIG_NET_RETRY_COUNT 10
64 #define CONFIG_OVERWRITE_ETHADDR_ONCE
65 /*=====================*/
66 /* Flash & Environment */
67 /*=====================*/
68 #undef CONFIG_ENV_IS_IN_FLASH
69 #define CONFIG_SYS_NO_FLASH
70 #define CONFIG_NAND_DAVINCI
71 #define CONFIG_SYS_NAND_CS 2
72 #define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
73 #define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */
74 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
75 #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
76 #define CONFIG_SYS_NAND_BASE 0x02000000
77 #define CONFIG_SYS_NAND_HW_ECC
78 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
79 #define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
80 /*=====================*/
81 /* Board related stuff */
82 /*=====================*/
83 #define CONFIG_RTC_DS1307 /* RTC chip on SCHMOOGIE */
84 #define CONFIG_SYS_I2C_RTC_ADDR 0x6f /* RTC chip I2C address */
85 #define CONFIG_UID_DS28CM00 /* Unique ID on SCHMOOGIE */
86 #define CONFIG_SYS_UID_ADDR 0x50 /* UID chip I2C address */
87 /*==============================*/
88 /* U-Boot general configuration */
89 /*==============================*/
90 #define CONFIG_MISC_INIT_R
91 #undef CONFIG_BOOTDELAY
92 #define CONFIG_BOOTFILE "uImage" /* Boot file name */
93 #define CONFIG_SYS_PROMPT "U-Boot > " /* Monitor Command Prompt */
94 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
95 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */
96 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
97 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
98 #define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
99 #define CONFIG_VERSION_VARIABLE
100 #define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
101 #define CONFIG_SYS_HUSH_PARSER
102 #define CONFIG_CMDLINE_EDITING
103 #define CONFIG_SYS_LONGHELP
104 #define CONFIG_CRC32_VERIFY
105 #define CONFIG_MX_CYCLIC
106 /*===================*/
107 /* Linux Information */
108 /*===================*/
109 #define LINUX_BOOT_PARAM_ADDR 0x80000100
110 #define CONFIG_CMDLINE_TAG
111 #define CONFIG_SETUP_MEMORY_TAGS
112 #define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
113 #define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot"
114 /*=================*/
115 /* U-Boot commands */
116 /*=================*/
117 #include <config_cmd_default.h>
118 #define CONFIG_CMD_ASKENV
119 #define CONFIG_CMD_DHCP
120 #define CONFIG_CMD_DIAG
121 #define CONFIG_CMD_I2C
122 #define CONFIG_CMD_MII
123 #define CONFIG_CMD_PING
124 #define CONFIG_CMD_SAVES
125 #define CONFIG_CMD_DATE
126 #define CONFIG_CMD_NAND
127 #undef CONFIG_CMD_EEPROM
128 #undef CONFIG_CMD_BDI
129 #undef CONFIG_CMD_FPGA
130 #undef CONFIG_CMD_SETGETDCR
131 #undef CONFIG_CMD_FLASH
132 #undef CONFIG_CMD_IMLS
133
134 #ifdef CONFIG_CMD_BDI
135 #define CONFIG_CLOCKS
136 #endif
137
138 #define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
139
140 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
141 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000
142 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
143 CONFIG_SYS_INIT_RAM_SIZE - \
144 GENERATED_GBL_DATA_SIZE)
145
146 #endif /* __CONFIG_H */