]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/dbau1x00.h
include/configs: Use new CONFIG_CMD_* in various d* named board config files.
[people/ms/u-boot.git] / include / configs / dbau1x00.h
1 /*
2 * (C) Copyright 2003
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24 /*
25 * This file contains the configuration parameters for the dbau1x00 board.
26 */
27
28 #ifndef __CONFIG_H
29 #define __CONFIG_H
30
31 #define CONFIG_MIPS32 1 /* MIPS32 CPU core */
32 #define CONFIG_DBAU1X00 1
33 #define CONFIG_AU1X00 1 /* alchemy series cpu */
34
35 #ifdef CONFIG_DBAU1000
36 /* Also known as Merlot */
37 #define CONFIG_AU1000 1
38 #else
39 #ifdef CONFIG_DBAU1100
40 #define CONFIG_AU1100 1
41 #else
42 #ifdef CONFIG_DBAU1500
43 #define CONFIG_AU1500 1
44 #else
45 #ifdef CONFIG_DBAU1550
46 /* Cabernet */
47 #define CONFIG_AU1550 1
48 #else
49 #error "No valid board set"
50 #endif
51 #endif
52 #endif
53 #endif
54
55 #define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */
56
57 #define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
58
59 #define CONFIG_BAUDRATE 115200
60
61 /* valid baudrates */
62 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
63
64 #define CONFIG_TIMESTAMP /* Print image info with timestamp */
65 #undef CONFIG_BOOTARGS
66
67 #define CONFIG_EXTRA_ENV_SETTINGS \
68 "addmisc=setenv bootargs ${bootargs} " \
69 "console=ttyS0,${baudrate} " \
70 "panic=1\0" \
71 "bootfile=/tftpboot/vmlinux.srec\0" \
72 "load=tftp 80500000 ${u-boot}\0" \
73 ""
74
75 #ifdef CONFIG_DBAU1550
76 /* Boot from flash by default, revert to bootp */
77 #define CONFIG_BOOTCOMMAND "bootm 0xbfc20000; bootp; bootm"
78 #else /* CONFIG_DBAU1550 */
79 #define CONFIG_BOOTCOMMAND "bootp;bootm"
80 #endif /* CONFIG_DBAU1550 */
81
82
83 /*
84 * Command line configuration.
85 */
86 #include <config_cmd_default.h>
87
88 #undef CONFIG_CMD_BDI
89 #undef CONFIG_CMD_BEDBUG
90 #undef CONFIG_CMD_ELF
91 #undef CONFIG_CMD_ENV
92 #undef CONFIG_CMD_FAT
93 #undef CONFIG_CMD_FPGA
94 #undef CONFIG_CMD_MII
95 #undef CONFIG_CMD_RUN
96
97
98 #ifdef CONFIG_DBAU1550
99
100 #define CONFIG_CMD_FLASH
101 #define CONFIG_CMD_LOADB
102 #define CONFIG_CMD_NET
103
104 #undef CONFIG_CMD_I2C
105 #undef CONFIG_CMD_IDE
106 #undef CONFIG_CMD_NFS
107 #undef CONFIG_CMD_PCMCIA
108
109 #else
110
111 #define CONFIG_CMD_IDE
112 #define CONFIG_CMD_DHCP
113
114 #undef CONFIG_CMD_FLASH
115 #undef CONFIG_CMD_LOADB
116 #undef CONFIG_CMD_LOADS
117
118 #endif
119
120
121 /*
122 * Miscellaneous configurable options
123 */
124 #define CFG_LONGHELP /* undef to save memory */
125
126 #define CFG_PROMPT "DbAu1xx0 # " /* Monitor Command Prompt */
127
128 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
129 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
130 #define CFG_MAXARGS 16 /* max number of command args*/
131
132 #define CFG_MALLOC_LEN 128*1024
133
134 #define CFG_BOOTPARAMS_LEN 128*1024
135
136 #define CFG_MHZ 396
137
138 #if (CFG_MHZ % 12) != 0
139 #error "Invalid CPU frequency - must be multiple of 12!"
140 #endif
141
142 #define CFG_HZ (CFG_MHZ * 1000000) /* FIXME causes overflow in net.c */
143
144 #define CFG_SDRAM_BASE 0x80000000 /* Cached addr */
145
146 #define CFG_LOAD_ADDR 0x81000000 /* default load address */
147
148 #define CFG_MEMTEST_START 0x80100000
149 #define CFG_MEMTEST_END 0x80800000
150
151 /*-----------------------------------------------------------------------
152 * FLASH and environment organization
153 */
154 #ifdef CONFIG_DBAU1550
155
156 #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
157 #define CFG_MAX_FLASH_SECT (512) /* max number of sectors on one chip */
158
159 #define PHYS_FLASH_1 0xb8000000 /* Flash Bank #1 */
160 #define PHYS_FLASH_2 0xbc000000 /* Flash Bank #2 */
161
162 #else /* CONFIG_DBAU1550 */
163
164 #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
165 #define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
166
167 #define PHYS_FLASH_1 0xbec00000 /* Flash Bank #1 */
168 #define PHYS_FLASH_2 0xbfc00000 /* Flash Bank #2 */
169
170 #endif /* CONFIG_DBAU1550 */
171
172 #define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
173
174 #define CFG_FLASH_CFI 1
175 #define CFG_FLASH_CFI_DRIVER 1
176
177 /* The following #defines are needed to get flash environment right */
178 #define CFG_MONITOR_BASE TEXT_BASE
179 #define CFG_MONITOR_LEN (192 << 10)
180
181 #define CFG_INIT_SP_OFFSET 0x400000
182
183 /* We boot from this flash, selected with dip switch */
184 #define CFG_FLASH_BASE PHYS_FLASH_2
185
186 /* timeout values are in ticks */
187 #define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */
188 #define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */
189
190 #define CFG_ENV_IS_NOWHERE 1
191
192 /* Address and size of Primary Environment Sector */
193 #define CFG_ENV_ADDR 0xB0030000
194 #define CFG_ENV_SIZE 0x10000
195
196 #define CONFIG_FLASH_16BIT
197
198 #define CONFIG_NR_DRAM_BANKS 2
199
200 #define CONFIG_NET_MULTI
201
202 #ifdef CONFIG_DBAU1550
203 #define MEM_SIZE 192
204 #else
205 #define MEM_SIZE 64
206 #endif
207
208 #define CONFIG_MEMSIZE_IN_BYTES
209
210 #ifndef CONFIG_DBAU1550
211 /*---ATA PCMCIA ------------------------------------*/
212 #define CFG_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
213 #define CFG_PCMCIA_MEM_ADDR 0x20000000
214 #define CONFIG_PCMCIA_SLOT_A
215
216 #define CONFIG_ATAPI 1
217 #define CONFIG_MAC_PARTITION 1
218
219 /* We run CF in "true ide" mode or a harddrive via pcmcia */
220 #define CONFIG_IDE_PCMCIA 1
221
222 /* We only support one slot for now */
223 #define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
224 #define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
225
226 #undef CONFIG_IDE_LED /* LED for ide not supported */
227 #undef CONFIG_IDE_RESET /* reset for ide not supported */
228
229 #define CFG_ATA_IDE0_OFFSET 0x0000
230
231 #define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
232
233 /* Offset for data I/O */
234 #define CFG_ATA_DATA_OFFSET 8
235
236 /* Offset for normal register accesses */
237 #define CFG_ATA_REG_OFFSET 0
238
239 /* Offset for alternate registers */
240 #define CFG_ATA_ALT_OFFSET 0x0100
241 #endif /* CONFIG_DBAU1550 */
242
243 /*-----------------------------------------------------------------------
244 * Cache Configuration
245 */
246 #define CFG_DCACHE_SIZE 16384
247 #define CFG_ICACHE_SIZE 16384
248 #define CFG_CACHELINE_SIZE 32
249
250 #endif /* __CONFIG_H */