include/configs/dns325.h

   1 /*
   2  * Copyright (C) 2011
   3  * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
   4  *
   5  * Based on Kirkwood support:
   6  * (C) Copyright 2009
   7  * Marvell Semiconductor <www.marvell.com>
   8  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _CONFIG_DNS325_H
  14 #define _CONFIG_DNS325_H
  15
  16 /*
  17  * Machine number definition
  18  */
  19 #define MACH_TYPE_DNS325                3800
  20 #define CONFIG_MACH_TYPE                MACH_TYPE_DNS325
  21 #define CONFIG_IDENT_STRING             "\nD-Link DNS-325"
  22
  23 /*
  24  * High Level Configuration Options (easy to change)
  25  */
  26 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  27 #define CONFIG_KW88F6281                /* SOC Name */
  28 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  29
  30 /*
  31  * Commands configuration
  32  */
  33 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  34 #define CONFIG_CMD_ENV
  35 #define CONFIG_CMD_NAND
  36 #define CONFIG_CMD_IDE
  37 #define CONFIG_CMD_DATE
  38 #define CONFIG_SYS_MVFS
  39
  40 #define CONFIG_NR_DRAM_BANKS            1
  41
  42 /*
  43  * mv-common.h should be defined after CMD configs since it used them
  44  * to enable certain macros
  45  */
  46 #include "mv-common.h"
  47
  48 /* Remove or override few declarations from mv-common.h */
  49
  50 /*
  51  * Ethernet Driver configuration
  52  */
  53 #ifdef CONFIG_CMD_NET
  54 #define CONFIG_MVGBE_PORTS              {1, 0} /* enable port 0 only */
  55 #define CONFIG_NETCONSOLE
  56 #endif
  57
  58 /*
  59  * SATA Driver configuration
  60  */
  61 #ifdef CONFIG_MVSATA_IDE
  62 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  63 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
  64 #endif
  65
  66 /*
  67  * RTC driver configuration
  68  */
  69 #ifdef CONFIG_CMD_DATE
  70 #define CONFIG_RTC_MV
  71 #endif
  72
  73 /*
  74  * Enable GPI0 support
  75  */
  76 #define CONFIG_KIRKWOOD_GPIO
  77
  78 /*
  79  * Console configuration
  80  */
  81 #define CONFIG_CONSOLE_MUX
  82 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  83
  84 /*
  85  * Display cpu info at boot
  86  */
  87 #define CONFIG_DISPLAY_CPUINFO
  88
  89 /*
  90  * Environment variables configurations
  91  */
  92 #ifdef CONFIG_CMD_NAND
  93 #define CONFIG_ENV_IS_IN_NAND
  94 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128KB */
  95 #else
  96 #define CONFIG_ENV_IS_NOWHERE
  97 #endif
  98
  99 #define CONFIG_ENV_SIZE                 0x20000 /* 128KB */
 100 #define CONFIG_ENV_ADDR                 0xe0000
 101 #define CONFIG_ENV_OFFSET               0xe0000 /* env starts here */
 102
 103 /*
 104  * Default environment variables
 105  */
 106 #define MTDIDS_DEFAULT                  "nand0=orion_nand"
 107
 108 #define MTDPARTS_DEFAULT                "mtdparts=orion_nand:" \
 109         "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
 110
 111 #define CONFIG_EXTRA_ENV_SETTINGS \
 112         "stdin=serial\0" \
 113         "stdout=serial\0" \
 114         "stderr=serial\0" \
 115         "loadaddr=0x800000\0" \
 116         "autoload=no\0" \
 117         "console=ttyS0,115200\0" \
 118         "mtdparts="MTDPARTS_DEFAULT \
 119         "optargs=\0" \
 120         "bootenv=uEnv.txt\0" \
 121         "importbootenv=echo Importing environment ...; " \
 122                 "env import -t ${loadaddr} ${filesize}\0" \
 123         "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
 124         "setbootargs=setenv bootargs console=${console} " \
 125                 "${optargs} " \
 126                 "${mtdparts} " \
 127                 "root=${bootenvroot} " \
 128                 "rootfstype=${bootenvrootfstype}\0" \
 129         "subbootcmd=run setbootargs; " \
 130                 "if run bootenvloadimage; then " \
 131                         "bootm ${loadaddr};" \
 132                 "fi;\0" \
 133         "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
 134         "nandrootfstype=ubifs\0" \
 135         "nandloadimage=nand read ${loadaddr} kernel\0" \
 136         "setnandbootenv=echo Booting from nand ...; " \
 137                 "setenv bootenvroot ${nandroot}; " \
 138                 "setenv bootenvrootfstype ${nandrootfstype}; " \
 139                 "setenv bootenvloadimage ${nandloadimage}\0"
 140
 141 #define CONFIG_BOOTCOMMAND \
 142         "if test -n ${bootenv} && usb start; then " \
 143                 "if run loadbootenv; then " \
 144                         "echo Loaded environment ${bootenv} from usb;" \
 145                         "run importbootenv;" \
 146                 "fi;" \
 147                 "if test -n ${bootenvcmd}; then " \
 148                         "echo Running bootenvcmd ...;" \
 149                         "run bootenvcmd;" \
 150                 "fi;" \
 151         "fi;" \
 152         "run setnandbootenv subbootcmd;"
 153
 154 #endif /* _CONFIG_DNS325_H */