include/configs/dreamplug.h

   1 /*
   2  * (C) Copyright 2011
   3  * Jason Cooper <u-boot@lakedaemon.net>
   4  *
   5  * Based on work by:
   6  * Marvell Semiconductor <www.marvell.com>
   7  * Written-by: Siddarth Gore <gores@marvell.com>
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef _CONFIG_DREAMPLUG_H
  13 #define _CONFIG_DREAMPLUG_H
  14
  15 /*
  16  * FIXME: This belongs in mach-types.h.  However, we only pull mach-types
  17  * from Linus' kernel.org tree.  This hasn't been updated primarily due to
  18  * the recent arch/arm reshuffling.  So, in the meantime, we'll place it
  19  * here.
  20  */
  21 #include <asm/mach-types.h>
  22 #ifdef MACH_TYPE_DREAMPLUG
  23 #error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this."
  24 #else
  25 #define MACH_TYPE_DREAMPLUG            3550
  26 #endif
  27
  28 /*
  29  * Version number information
  30  */
  31 #define CONFIG_IDENT_STRING     "\nMarvell-DreamPlug"
  32
  33 /*
  34  * High Level Configuration Options (easy to change)
  35  */
  36 #define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  37 #define CONFIG_KW88F6281        1       /* SOC Name */
  38 #define CONFIG_MACH_TYPE        MACH_TYPE_DREAMPLUG
  39 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  40 #define CONFIG_SYS_GENERIC_BOARD
  41
  42 /* Add target to build it automatically upon "make" */
  43 #define CONFIG_BUILD_TARGET     "u-boot.kwb"
  44
  45 /*
  46  * Commands configuration
  47  */
  48 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  49 #define CONFIG_CMD_DHCP
  50 #define CONFIG_CMD_ENV
  51 #define CONFIG_CMD_FAT
  52 #define CONFIG_CMD_SF
  53 #define CONFIG_CMD_PING
  54 #define CONFIG_CMD_USB
  55 #define CONFIG_CMD_IDE
  56 #define CONFIG_CMD_DATE
  57
  58 /*
  59  * mv-common.h should be defined after CMD configs since it used them
  60  * to enable certain macros
  61  */
  62 #include "mv-common.h"
  63
  64 /*
  65  *  Environment variables configurations
  66  */
  67 #ifdef CONFIG_SPI_FLASH
  68 #define CONFIG_ENV_IS_IN_SPI_FLASH      1
  69 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64k */
  70 #else
  71 #define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  72 #endif
  73
  74 #ifdef CONFIG_CMD_SF
  75 #define CONFIG_HARD_SPI                 1
  76 #define CONFIG_KIRKWOOD_SPI             1
  77 #define CONFIG_SPI_FLASH_MACRONIX       1
  78 #define CONFIG_ENV_SPI_BUS              0
  79 #define CONFIG_ENV_SPI_CS               0
  80 #define CONFIG_ENV_SPI_MAX_HZ           50000000 /* 50 MHz */
  81 #endif
  82
  83 /*
  84  * max 4k env size is enough, but in case of nand
  85  * it has to be rounded to sector size
  86  */
  87 #define CONFIG_ENV_SIZE                 0x1000  /* 4k */
  88 #define CONFIG_ENV_ADDR                 0x100000
  89 #define CONFIG_ENV_OFFSET               0x100000 /* env starts here */
  90
  91 /*
  92  * Default environment variables
  93  */
  94 #define CONFIG_BOOTCOMMAND              "setenv ethact egiga0; " \
  95         "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
  96         "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
  97         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  98         "bootm 0x6400000;"
  99
 100 #define CONFIG_EXTRA_ENV_SETTINGS       \
 101         "x_bootcmd_ethernet=ping 192.168.2.1\0" \
 102         "x_bootcmd_usb=usb start\0"     \
 103         "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
 104         "x_bootargs=console=ttyS0,115200\0"     \
 105         "x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
 106
 107 /*
 108  * Ethernet Driver configuration
 109  */
 110 #ifdef CONFIG_CMD_NET
 111 #define CONFIG_MVGBE_PORTS      {1, 1}  /* enable both ports */
 112 #define CONFIG_PHY_BASE_ADR     0
 113 #endif /* CONFIG_CMD_NET */
 114
 115 /*
 116  * SATA Driver configuration
 117  */
 118 #ifdef CONFIG_MVSATA_IDE
 119 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 120 #endif /*CONFIG_MVSATA_IDE*/
 121
 122 /*
 123  * RTC driver configuration
 124  */
 125 #ifdef CONFIG_CMD_DATE
 126 #define CONFIG_RTC_MV
 127 #endif /* CONFIG_CMD_DATE */
 128
 129 #define CONFIG_SYS_ALT_MEMTEST
 130
 131 /*
 132  * display enhanced info about the cpu at boot.
 133  */
 134 #define CONFIG_DISPLAY_CPUINFO
 135
 136 #define CONFIG_OF_LIBFDT
 137
 138 #endif /* _CONFIG_DREAMPLUG_H */