]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/dreamplug.h
x86: Remove CONFIG_SYS_EARLY_PCI_INIT
[people/ms/u-boot.git] / include / configs / dreamplug.h
1 /*
2 * (C) Copyright 2011
3 * Jason Cooper <u-boot@lakedaemon.net>
4 *
5 * Based on work by:
6 * Marvell Semiconductor <www.marvell.com>
7 * Written-by: Siddarth Gore <gores@marvell.com>
8 *
9 * SPDX-License-Identifier: GPL-2.0+
10 */
11
12 #ifndef _CONFIG_DREAMPLUG_H
13 #define _CONFIG_DREAMPLUG_H
14
15 /*
16 * FIXME: This belongs in mach-types.h. However, we only pull mach-types
17 * from Linus' kernel.org tree. This hasn't been updated primarily due to
18 * the recent arch/arm reshuffling. So, in the meantime, we'll place it
19 * here.
20 */
21 #include <asm/mach-types.h>
22 #ifdef MACH_TYPE_DREAMPLUG
23 #error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this."
24 #else
25 #define MACH_TYPE_DREAMPLUG 3550
26 #endif
27
28 /*
29 * Version number information
30 */
31 #define CONFIG_IDENT_STRING "\nMarvell-DreamPlug"
32
33 /*
34 * High Level Configuration Options (easy to change)
35 */
36 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
37 #define CONFIG_KW88F6281 1 /* SOC Name */
38 #define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG
39 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
40
41 /* Add target to build it automatically upon "make" */
42 #define CONFIG_BUILD_TARGET "u-boot.kwb"
43
44 /*
45 * Commands configuration
46 */
47 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
48 #define CONFIG_CMD_DHCP
49 #define CONFIG_CMD_ENV
50 #define CONFIG_CMD_FAT
51 #define CONFIG_CMD_SF
52 #define CONFIG_CMD_PING
53 #define CONFIG_CMD_USB
54 #define CONFIG_CMD_IDE
55 #define CONFIG_CMD_DATE
56
57 /*
58 * mv-common.h should be defined after CMD configs since it used them
59 * to enable certain macros
60 */
61 #include "mv-common.h"
62
63 /*
64 * Environment variables configurations
65 */
66 #ifdef CONFIG_SPI_FLASH
67 #define CONFIG_ENV_IS_IN_SPI_FLASH 1
68 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
69 #else
70 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
71 #endif
72
73 #ifdef CONFIG_CMD_SF
74 #define CONFIG_HARD_SPI 1
75 #define CONFIG_KIRKWOOD_SPI 1
76 #define CONFIG_SPI_FLASH_MACRONIX 1
77 #define CONFIG_ENV_SPI_BUS 0
78 #define CONFIG_ENV_SPI_CS 0
79 #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
80 #endif
81
82 /*
83 * max 4k env size is enough, but in case of nand
84 * it has to be rounded to sector size
85 */
86 #define CONFIG_ENV_SIZE 0x1000 /* 4k */
87 #define CONFIG_ENV_ADDR 0x100000
88 #define CONFIG_ENV_OFFSET 0x100000 /* env starts here */
89
90 /*
91 * Default environment variables
92 */
93 #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
94 "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
95 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
96 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
97 "bootm 0x6400000;"
98
99 #define CONFIG_EXTRA_ENV_SETTINGS \
100 "x_bootcmd_ethernet=ping 192.168.2.1\0" \
101 "x_bootcmd_usb=usb start\0" \
102 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
103 "x_bootargs=console=ttyS0,115200\0" \
104 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
105
106 /*
107 * Ethernet Driver configuration
108 */
109 #ifdef CONFIG_CMD_NET
110 #define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
111 #define CONFIG_PHY_BASE_ADR 0
112 #endif /* CONFIG_CMD_NET */
113
114 /*
115 * SATA Driver configuration
116 */
117 #ifdef CONFIG_MVSATA_IDE
118 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
119 #endif /*CONFIG_MVSATA_IDE*/
120
121 /*
122 * RTC driver configuration
123 */
124 #ifdef CONFIG_CMD_DATE
125 #define CONFIG_RTC_MV
126 #endif /* CONFIG_CMD_DATE */
127
128 #define CONFIG_SYS_ALT_MEMTEST
129
130 /*
131 * display enhanced info about the cpu at boot.
132 */
133 #define CONFIG_DISPLAY_CPUINFO
134
135 #define CONFIG_OF_LIBFDT
136
137 #endif /* _CONFIG_DREAMPLUG_H */