]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/dreamplug.h
mx6sabre: Do not enable UMS with SPL
[people/ms/u-boot.git] / include / configs / dreamplug.h
1 /*
2 * (C) Copyright 2011
3 * Jason Cooper <u-boot@lakedaemon.net>
4 *
5 * Based on work by:
6 * Marvell Semiconductor <www.marvell.com>
7 * Written-by: Siddarth Gore <gores@marvell.com>
8 *
9 * SPDX-License-Identifier: GPL-2.0+
10 */
11
12 #ifndef _CONFIG_DREAMPLUG_H
13 #define _CONFIG_DREAMPLUG_H
14
15 /*
16 * FIXME: This belongs in mach-types.h. However, we only pull mach-types
17 * from Linus' kernel.org tree. This hasn't been updated primarily due to
18 * the recent arch/arm reshuffling. So, in the meantime, we'll place it
19 * here.
20 */
21 #include <asm/mach-types.h>
22 #ifdef MACH_TYPE_DREAMPLUG
23 #error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this."
24 #else
25 #define MACH_TYPE_DREAMPLUG 3550
26 #endif
27
28 /*
29 * Version number information
30 */
31 #define CONFIG_IDENT_STRING "\nMarvell-DreamPlug"
32
33 /*
34 * High Level Configuration Options (easy to change)
35 */
36 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
37 #define CONFIG_KW88F6281 1 /* SOC Name */
38 #define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG
39 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
40
41 /*
42 * Commands configuration
43 */
44 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
45 #include <config_cmd_default.h>
46 #define CONFIG_CMD_DHCP
47 #define CONFIG_CMD_ENV
48 #define CONFIG_CMD_FAT
49 #define CONFIG_CMD_SF
50 #define CONFIG_CMD_PING
51 #define CONFIG_CMD_USB
52 #define CONFIG_CMD_IDE
53 #define CONFIG_CMD_DATE
54
55 /*
56 * mv-common.h should be defined after CMD configs since it used them
57 * to enable certain macros
58 */
59 #include "mv-common.h"
60
61 /*
62 * Environment variables configurations
63 */
64 #ifdef CONFIG_SPI_FLASH
65 #define CONFIG_ENV_IS_IN_SPI_FLASH 1
66 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
67 #else
68 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
69 #endif
70
71 #ifdef CONFIG_CMD_SF
72 #define CONFIG_SPI_FLASH 1
73 #define CONFIG_HARD_SPI 1
74 #define CONFIG_KIRKWOOD_SPI 1
75 #define CONFIG_SPI_FLASH_MACRONIX 1
76 #define CONFIG_ENV_SPI_BUS 0
77 #define CONFIG_ENV_SPI_CS 0
78 #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
79 #endif
80
81 /*
82 * max 4k env size is enough, but in case of nand
83 * it has to be rounded to sector size
84 */
85 #define CONFIG_ENV_SIZE 0x1000 /* 4k */
86 #define CONFIG_ENV_ADDR 0x100000
87 #define CONFIG_ENV_OFFSET 0x100000 /* env starts here */
88
89 /*
90 * Default environment variables
91 */
92 #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
93 "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
94 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
95 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
96 "bootm 0x6400000;"
97
98 #define CONFIG_EXTRA_ENV_SETTINGS \
99 "x_bootcmd_ethernet=ping 192.168.2.1\0" \
100 "x_bootcmd_usb=usb start\0" \
101 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
102 "x_bootargs=console=ttyS0,115200\0" \
103 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
104
105 /*
106 * Ethernet Driver configuration
107 */
108 #ifdef CONFIG_CMD_NET
109 #define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
110 #define CONFIG_PHY_BASE_ADR 0
111 #endif /* CONFIG_CMD_NET */
112
113 /*
114 * SATA Driver configuration
115 */
116 #ifdef CONFIG_MVSATA_IDE
117 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
118 #endif /*CONFIG_MVSATA_IDE*/
119
120 /*
121 * RTC driver configuration
122 */
123 #ifdef CONFIG_CMD_DATE
124 #define CONFIG_RTC_MV
125 #endif /* CONFIG_CMD_DATE */
126
127 #define CONFIG_SYS_ALT_MEMTEST
128
129 /*
130 * display enhanced info about the cpu at boot.
131 */
132 #define CONFIG_DISPLAY_CPUINFO
133
134 #define CONFIG_OF_LIBFDT
135
136 #endif /* _CONFIG_DREAMPLUG_H */