include/configs/dreamplug.h

   1 /*
   2  * (C) Copyright 2011
   3  * Jason Cooper <u-boot@lakedaemon.net>
   4  *
   5  * Based on work by:
   6  * Marvell Semiconductor <www.marvell.com>
   7  * Written-by: Siddarth Gore <gores@marvell.com>
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef _CONFIG_DREAMPLUG_H
  13 #define _CONFIG_DREAMPLUG_H
  14
  15 /*
  16  * FIXME: This belongs in mach-types.h.  However, we only pull mach-types
  17  * from Linus' kernel.org tree.  This hasn't been updated primarily due to
  18  * the recent arch/arm reshuffling.  So, in the meantime, we'll place it
  19  * here.
  20  */
  21 #include <asm/mach-types.h>
  22 #ifdef MACH_TYPE_DREAMPLUG
  23 #error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this."
  24 #else
  25 #define MACH_TYPE_DREAMPLUG            3550
  26 #endif
  27
  28 /*
  29  * Version number information
  30  */
  31 #define CONFIG_IDENT_STRING     "\nMarvell-DreamPlug"
  32
  33 /*
  34  * High Level Configuration Options (easy to change)
  35  */
  36 #define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  37 #define CONFIG_MACH_TYPE        MACH_TYPE_DREAMPLUG
  38
  39 /*
  40  * Commands configuration
  41  */
  42
  43 /*
  44  * mv-plug-common.h should be defined after CMD configs since it used them
  45  * to enable certain macros
  46  */
  47 #include "mv-plug-common.h"
  48
  49 /*
  50  *  Environment variables configurations
  51  */
  52 #ifdef CONFIG_SPI_FLASH
  53 #define CONFIG_ENV_IS_IN_SPI_FLASH      1
  54 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64k */
  55 #else
  56 #define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  57 #endif
  58
  59 #ifdef CONFIG_CMD_SF
  60 #define CONFIG_HARD_SPI                 1
  61 #define CONFIG_KIRKWOOD_SPI             1
  62 #define CONFIG_ENV_SPI_BUS              0
  63 #define CONFIG_ENV_SPI_CS               0
  64 #define CONFIG_ENV_SPI_MAX_HZ           50000000 /* 50 MHz */
  65 #endif
  66
  67 /*
  68  * max 4k env size is enough, but in case of nand
  69  * it has to be rounded to sector size
  70  */
  71 #define CONFIG_ENV_SIZE                 0x1000  /* 4k */
  72 #define CONFIG_ENV_ADDR                 0x100000
  73 #define CONFIG_ENV_OFFSET               0x100000 /* env starts here */
  74
  75 /*
  76  * Default environment variables
  77  */
  78 #define CONFIG_BOOTCOMMAND              "setenv ethact egiga0; " \
  79         "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
  80         "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
  81         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  82         "bootm 0x6400000;"
  83
  84 #define CONFIG_EXTRA_ENV_SETTINGS       \
  85         "x_bootcmd_ethernet=ping 192.168.2.1\0" \
  86         "x_bootcmd_usb=usb start\0"     \
  87         "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
  88         "x_bootargs=console=ttyS0,115200\0"     \
  89         "x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
  90
  91 /*
  92  * Ethernet Driver configuration
  93  */
  94 #ifdef CONFIG_CMD_NET
  95 #define CONFIG_MVGBE_PORTS      {1, 1}  /* enable both ports */
  96 #define CONFIG_PHY_BASE_ADR     0
  97 #endif /* CONFIG_CMD_NET */
  98
  99 /*
 100  * SATA Driver configuration
 101  */
 102 #ifdef CONFIG_MVSATA_IDE
 103 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 104 #endif /*CONFIG_MVSATA_IDE*/
 105
 106 #endif /* _CONFIG_DREAMPLUG_H */